USB transfer

Similar Questions

• Satellite A60 - very slow USB transfer speed

  Hello

  I have a Satellite A60 with XP Home and the USB transfer speed is very very low. Is 2.0, but it is not working properly, because it takes about 30 minutes to copy the data from 1 GB on a USB 2.0 drive externally.

  I tried my USB drives on another computer and work quickly and well, so it is probably just a problem of drivers, but can't find them on the web from Toshiba to reinstall them. I heard that it is a common problem after installation of XP Service Pack 2, but I didn't do anything, I use the operating system as it came when I bought the laptop (with XP Home SP2 preinstalled original), I do not change any configuration or install drivers that can affect to the USB controllers and it has always been so slow.

  Could someone help? I tried to reinstall the drivers from Toshiba, but I think that there are not more special just for the USB, what should I update then? I need to improve the transfer speed of USB data for professional purposes, because I can't lose so given at the time of the transfer, please please please help!

  PS: Sorry for my terrible English, but it is there no Toshiba forums on my tongue: P

  Hello

  USB drivers are part of the operating system and you are unable to download the USB drivers separately.
  In my view, it is really not necessary to reinstall the USB drivers because the USB HDD is recognized correctly and it works.

  USB 2.0 transfer speed 480 Mbps supports and if any didn't error message then the USB ports running at full speed.

  For more details, please see this page of Microsoft;
  http://www.Microsoft.com/windowsxp/using/networking/learnmore/jones_02august05.mspx

  Last but not least I would recommend to update the XP to the last State. I mean that you need to install all of the available patches and fixes.

  Good bye

• Why so slow USB transfer in Windows 7?

  OK, I have seen a lot of questions about it, anywhere on the web and no good response from someone at Microsoft or at least an acceptance that somewhere along the line, someone out there screwed up where perma-slow USB transfer for Windows 7 users.

  Yes, my drivers are up to date. My USB transfers are spend only 6 MB/s MAX I tried all ports. FireWire transfer is fine. eSata too.

  Tapping my toe, waiting for a response...

  Clean your PC boot, then test transfer USB (voltage ICH? I don't think)

• HP Pavilion P2-1140 does not have a way to connect to a Firewire port and USB transfer is not supported by Windows 7 to connect the Sony HC20 Handycam.

  Original title: Sony Hanycam HC20

  I just bought a HP Pavilion P2 - 1140 W7 64 bit and may not know how to download video from my Sony Handycam HC-20 who

  using a Firewire connection. P2-1140 does not have a way to connect to a Firewire port and USB transfer is not supported by Windows 7.

  I looked in the spec of my card mother HP and there is no additional slots to add adapters, no PCI, PCI-e or anything that looks like

  as if you can add anything. I know that the Firewire to USB converters cable do NOT work, any suggestions please

  There are USB firewire converters, but I think it will be a situation of hit or miss--they are unable to work or perform very well.

  The only option I can think of that would work would be to use AV out on the camera and a USB capture card that records on the computer.
  You can also consider going back to the computer and get a different model that is built in firewire support or at least an extension connector in order to get an expansion card.

• USB transfer device

  Hello

  I need to create an environment for development purposes android in my

  company (6 software engineers) and with the support of USB transfer device.

  I install VMware ESXi 4.1 on DELL 780 4 GB of memory (for testing of use), with ubuntu 32-bit desktop.

  I need developers will connect the phone android via the USB port of the

  host (winXP 32) running the vSphere client and will appear on the desktop ubuntu VM on ESXi

  Server.

  I add a usb controller to VM and when I connect the usb (Kingston device

  DataTraveler) to the ESXi server it will appear on the virtual machine but if I

  Connect the USB cable to the client host (client vSphere), nothing happened.

  What's wrong??

  VMware View: http://www.vmware.com/products/view/

  You can download for trial. It is usually delivered licensing ESX/VC when you buy a package.

  Marcelo Soares

  VMWare Certified Professional 310/410

  Master virtualization technology

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• ESXi 4.1 USB transfer

  Read the help files, it seems that the USB for vSphere 4.1 requires Virtual Center... I wish I knew that before the operation because I was really looking forward to using this feature.

  Well, I can't be the only person who did not know

  Are you sure that USB transfer requires vCenter?  That does not appear in this KB... http://KB.VMware.com/kb/1022290

• 3 USB with USB transfer speed

  I have a HP Pavilion dv8-1110ea laptop with Express Card 54 slot (also supports ExpressCard/34). I bought logic FL1000 USB 3.0 Express Card controller. I installed the driver without problem and the USB works fine, but at the speed of transfer USB 2. I use it with a WD Elements external hard drive. Thank you for any assistance.

  RonBarker wrote:
  

  Thanks, but what I really want to know is if there is nothing in my computer model that does not allow the use of the card Express as a walk of 3 USB as it would on a compatible computer.  Also, the readings show a write speed much slower than the speed reading.  This could be a problem with the post.  Thank you

  It is unlikely that there is something in the hardware of your laptop that is the problem of writing speed.

  You will get different results with different devices depending on the size and the type of file that is transferred as test or real.

  It is as @banhien says, if you want really high speed usb 3.0, then you will need to go to a notabook of latest generation with native usb 3.0 ports. Read up on it. There is a lot of information on usb 3.0 of the firmware and hardware available online for your reading pleasure.

• How to prevent an easy run automatically on USB transfer

  Hold on!  Never mind. I have disconnected/reconnected inside and now everything is fine.

  initial question:
  I used my usb key to move some files with Easy Transfer. Now, whenever I open the mem stick in doubleclicking Explorer, he tries to run Easy Transfer. I deleted the shortcut to the file transfer, Windows Easy Transfer file and the autorun from the memory stick file.
  I can't find anything relevant on the other to stop this.

  Hi alohamorgan,
   
  Good to know that the problem has been resolved. Write us for any other question in the future.

• USB transfer cable does not recognize the photo LCD

  I'm trying to transfer photos to jpeg from my computer in a LCD photo frame.  I use a usb gigaware transfer cable.  When I select drive e: im to insert a CD in the e drive.  All usb ports are saying the same thing. Insert the disk into drive e:.  The photo frame supports my portable usb files in jpeg format, but I can't seem to get the program to be saved in the internal memory of the frame and can not copy and paste it because the opinion of disk insertion.

  Hi Coloradosioux,

  Question: "Please insert the disc in the drive" message when you access a USB flash drive.

  Here are some possible solutions for your question. I would like to know how it works:

  Method 1:

  1. Insert the removable disk in the removable drive before you start your computer.

  (Make sure that you have not the bios Setup to boot from the USB drive)

  Method2:

  1 log in as administrator or with an account that has administrator privileges

  2. Insert your removable disk into the USB port.

  3. Click Start, right click on computer and select Manage

  4. click on disk management

  5. right click on the removable disk partition and select change drive letter and paths to the title of the disk management.

  6. change the letter of the USB key to a different drive letter.

  Reference:

  http://www.troublefixers.com/how-to-fix-please-insert-a-disk-into-drive-error-in-Windows/

  Hope this helps,

  Steve <> Microsoft Partner

• Photos of USB transfer to computer error

  I'm trying to put my photos on a USB key on my computer and the computer says 'cannot read the source file or disk. Anyone have any ideas what I can do to save my pictures? This isn't the case for all the photos just the odd and there?  Thank you very much

  I'm trying to put my photos on a USB key on my computer and the computer says 'cannot read the source file or disk. Anyone have any ideas what I can do to save my pictures? This isn't the case for all the photos just the odd and there?  Thank you very much

  ================================================
  You send messages in a Windows XP Forum... you use XP?

  If you go to... Start button / workstation... is the recognized USB
  with a drive letter? Without doubt, he is listed as a removable disk.

  If_yes_right click on the drive letter and from the menu choose open or explore.

  This should display the directory of the drive and allows you to copy the
  files from there to a folder on your hard drive.

• The simultaneous use of wifi streaming and USB transfer

  Hello

  I want to write files to this disk from a PC connected via USB wireless, and wireless streaming at the same time drive another file to another device.  This usage scenario is possible in this product?

  Thank you

  No this is not possible with all products wireless of sandisk. They are not accessible through MSC and wireless at the same time.

• USB transfer does not not for iPads on VM Mac after the last update?

  Hello:

  I have a VM 10.10 that I use to manage some iPads to the Department via the configurator to Apple.  After 8.1 update, I can't have iPads to connect regularly.  When I get to get an iPad connected and try the update, it will not reconnect.  I tried changing the settings of relay USB connect only to the virtual machine, but nothing helped.  This happens also in iTunes.

  Anyone else have this or similar problems?

  Hello

  Thanks for the posting. This problem can be reproduced on my laptop with the iPhone. Sorry for the inconvenience.

  I reported this problem to our development team. If there are no updates to this topic on this page will keep you informed.

  Thank you

  Tim

• HP Elitebook 8570p - Windows XP USB very slow and the transfer rate performance issues.

  Hello. I was wondering if anyone else knows some performance issues with the HP Elitebook 8570p and Windows XP Pro - SP3.

  I get a VERY slow start, general poor performance (waiting time when opening files and programs).

  I asked to burn in tests that show that everything is good.

  USB transfer rates are VERY slow (tried all ports of a Seagate FreeAgent USB drive, which works fine on other laptops etc.) for example a 30-minute transfer a 7gig single file of the USB HD on the desktop. Only 3 minutes to do the same on another laptop.

  I think there are problems with the drivers, like Windows 7 works very well and does boot from a bootable USB.

  USB transfer rate are also good when starting from a Windows boot environment.

  I installed HP SoftPaq Download Manager, and all the drivers are up to date.

  Hello:

  I think outside of the box here... Select the Intel (r) 7 Series Chipset Family SATA AHCI Controller instead.

  If it does not, I raise the white flag.

  Paul

• Satellite A100 - 192 Windows Vista USB low speed

  Hello

  I installed vista on A100-192, I configured everything correctly, all the drivers installed, but the USB transfer speed is totally low and when hollow transfring usb I have sound and video form. / CPU usage is 100 percent when data transfer from my camera or compact flash. Same thing with the PCMCIA card.
  On windows xp, it worked great!
  I guess it's something about drivers, because when I connect my hard drive usb hollow it works very well/windows sees it as a hard drive, but when I connect something else, and windows sees it as a removable drive - about low speed starts :/

  Any idea on how to solve this problem?

  Best regards
  Krystian

  Hello

  do you have what drivers installed? That you have downloaded the drivers, have you downloaded the correct drivers? Sorry for my question, but I'm sometimes on certain things and then I can't explain the errors that are produced.

  Welcome them

• Lenovo Miix 2 8 "File Transfer FRO another PC. Is this possible?

  So I had the Lenovo Mixx 2 8 "Windows 8.1 compressed the other day and I find there is no option USB transfer thereon. It's not eaxactly a bad thing, because the Tablet is pretty much a PC and how it works pretty well so far.

  My Question is: is it possible to transfer files via USB for Windows for Windows? I bought these OTG cables, will help them? If so, how does it work?

  Thank you!

  N ° unlike knowledge the Android device, Windows Tablet cannot behave as a mass storage device when connected to USB. For the same reason you can't connect two PC via a USB cable directly. It is by design.

  OTG cable allows you to connect the USB client device like flash or HARD disk drive to your Tablet and the transfer of the files it. With a decent WiFi access point file of up to 10 MB/s transfer speeds are possible. This is how I generally transfer files between the PC (cable) and Miix2 (wireless).

  Tomas