Tecra A2 external monitor problems

Similar Questions

• Tecra A9 - external monitor black after closing lid

  Greetings, I looked for answers to this but can't find so far.

  I have a Tecra A9.

  My problem: I have an external display connected. Sometimes, when I get to work in the morning and open the lid of my laptop the monitor to the laptop and external monitor are black. I can restore the laptop using the shortcut key screen, but no matter what I can not do the external monitor to view anything until I restart. I tried turning power off and then on, by disconnecting and then reconnecting the data cable.

  I leave my machine all the time, do not turn off during the night. I have the ability to shut down/hibernate/suspend on closing the lid off.
  I have disabled all the management of the power supply for the monitor so that it turns off by windows.

  I am running Vista 32 bit Ultimate Business and have a Mobile Intel 965 Express Chipset Family. I checked Toshiba site for the latest version of the video driver Vista and have the latest installed. By checking on the Intel site, I learned that I have a custom Setup and you me advised to go to the provider's site for the latest version of the driver.

  This problem occurs only occasionally and I failed to pin what make it even except what happens sometimes all night, maybe after I have use connection remote desktop to access the remote machine.

  I think I might have a problem with the video card hardware, but of course I can't prove anything.

  Does anyone have any ideas as to how I test more?
  Thank you.

  Try to update to other drivers, such as the package added Toshiba.

  Updated the BIOS and try a new installation of Windows (run recovery) if possible.

• Tecra A9 - external monitor shows scratches during the use of the computer laptop pluged.

  Hello

  I heard at least Tecras A9 product witch scratches on the external display only 3 when the laptop is pluged. When you use the laptop with the battery, the monitor works fine. they tried to divide the monitor and power cables as far as possible, but still the same problem. When you use the laptop with a non-toshiba-AC adapter, the external monitor works fine.

  Hello

  In my opinion, you should visit the nearest Toshiba authorized service provider. They can plug in your Tecra external monitors and test. If the result is the same, I am sure that you will get free AC adapter replacement.

  Do not wait and discuss the days here. Contact with them and I hope they help you.

• Tecra A - external monitor swimming

  Hello

  I have connected my tecra to a 2242 W LG via VGA. Now my external screen is swimming. It is somewhat strange because the external monitor already worked before with three different phones. My settings are 1680 * 1050 at 60 Hz.

  Thank you

  Murat

  Hey,.

  What do you mean with swim? Do you mean that your monitor flickers?

  If so try another cable. I would recommend a high quality of Lindy for example cable.

  Otherwise, check the forum. You will find similar topics and it could be related to the AC adapter:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=187765

• Tecra M5 - external monitor detected but not image

  Hello

  I just bought Tecra M5 for use with my external NEC monitor. However, regardless of the configuration, I try I get no image on the monitor. The LED on the monitor indicates that it receives the signal from the laptop but the monitor remains black pitch. The monitor works obviously very well, I just disconnected from another laptop.

  I tried all possible settings in the nVidia control panel, but without success. I also changed "Power On Display" in the BIOS "Screen LCD + Analog RGB" but no luck either.

  I have v.3.70 of BIOS and graphics card drivers v.7.15.

  Can anyone help?

  Thank you
  Mike

  PS When I press Fn + F5, I have no options to choose from, unlike the other FN +... combinations. I don't know that it should be everything, but it is perhaps worth mentioning.

  Also when I select only 'use a view' of the nVidia control panel and select my NEC monitor in the list, the monitor turns on and the light turns green, but the screen is still black. Like I can't accept changes the output switches to the computer screen after a few seconds.

  Hello

  I think you should test with the preinstalled Toshiba operating system.
  After that the laptop was recovered, connect the external monitor and use the FN + F5 in order to detect the external display.

• Re: Satellite A200-1IZ - external monitor problem

  Hello
  I recently bought an IPS monitor for photo editing. I configured the monitor in several ways, such as two monitors or monitors extended, but the image on the external monitor has a few little flicker and the image is not very pleasing to the eyes, a feeling like little refreshment on old monitor, very disturbing for the eyes.
  I plugged the monitor into another laptop and the image is much better.

  What could be the problem? I have Windows 7 32 bit and Ati Mobility Radeon HD 2600 adapter with the latest drivers.

  We do not know what monitor you have exactly, but what is the native screen resolution and what resolution is set to the external monitor when you use it with your laptop?

• ThinkPad Yoga 260 external monitor problem

  Greetings,

  I bought a Lenovo ThinkPad Yoga 260 (Core i7, 8 GB of RAM, Win10 Pro 64-bit, the Type of Machine 20FD) October 18, 2016.

  When I connect it to my external monitor Dell U2713H, the screen blackens periodically respectively off and turn it back on after 1-2 seconds. The display works fine with my other 260 Yoga with the same specifications.

  The problem occurs when connected via DisplayPort, but also via HDMI. I have all tried, installed upgrading the BIOS, all new drivers, reset the Yoga to the factory settings and tried it again.

  Have you any idea what need then try to solve this problem?

  Thanks in advance

  In response to customer reports of flashing or flickering on external monitors connected to Yoga 260 ThinkPad systems via an adapter OneLink + VGA/RJ45 or OneLink + dock, Lenovo has provided a solution for ThinkPad 260 Yoga systems under warranty.

  To contact the Lenovo Service, please click here and reference Service TIP SF16-T0080 / HT502248. This solution will require the 260 Yoga be repaired.

  Thank you

• External monitor problem

  Let me start by saying that I had this work once.  Here is what happened.  I was watching Netflix on my laptop using my flat screen tv as a monitor. The monitor of the laptop was also.  When the video started to freeze intermittently, I thought that I might be able to decrease the load on the computer using only the tv for the monitor, but I couldn't find the dialog box to change the selection (please don't tell me where it is, I found it since.)  (Read more).  My son suggested by pressing Fn + F5.  The icon seemed sensitive so I tried.  I lost the image on my screen laptop and become blurred the image of the TV.  I pressed the keys again hoping to get back to what I had before, but it didn't work.

  Here is where I am now.  The laptop is fine as long as I do not connect the VGA cord.  As soon as I plug the VGA cord, the laptop monitor goes black.  The TV screen reads "signal not supported."

  Here is what I tried:

  Tested by VGA cable and laptop on another TV; This works.
  Tested another computer on the tv problem. This works.
  Changed my resolution of the laptop must match that on the other computer that worked: no change
  Found original (while connected to other tv) dialog box and check the mirror on the second monitor *: no change
  Looked in device under monitors for television Manager, hoping to remove it and start again, but it is not listed

  Oh and Yes, I have power all recycled several times and enabled their return in every possible order.

  My thoughts - Windows says that the info for each monitor is stored so that when you reconnect to it, the same settings are applied.  I think maybe somehow I need to purge these parameters or return to the default value. I can't understand how to do this.

  * I just can't reach this dialog box without a connected external monitor, and as soon as I connect the tv, that I am using, my laptop screen goes black, so I can't change this setting when you are connected to the tv I want to use.

  Connect and scroll with your hotkeys again.  These keys are distinguished by the laptop.

  Install the most recent/most great driver and software from the video device manufacturer (which is Microsoft.)  Likely to Intel, nVidia or ATI (AMD).

• Tecra M5: External monitor flickers - grounded question?

  Hello

  I just bought a new Acer Full HD LCD Monitor (P244W) and have tried to connect on my Tecra M5 VGA port.
  It works, but there is a noticeable and more annoying flicker. I tried with XP (SP3) and now Vista (SP1) and it happens for both. I have the latest BIOS and NVidia drivers. The actual laptop LCD screen still works fine, it's just the external screen that flickers.

  To make sure that there is nothing wrong with the monitor, I plugged the ATI video card VGA port on my desktop pc and it displays fine without flickering.

  After completing the web for people with similar problems, I narrowed down it to her being caused by my power adapter with a grounding problem as the flicker disappears as soon as I unplug the AC adapter and just run the battery. It seems the solutons common to this problem are:

  (1) try some different VGA cables with better shielding against interference.
  I tried this and it made no difference. I tried cables with or without the magnet ferrite/Starter thing at both ends of the cable and the flicker remained.

  (2) try the different screen resolutions and refresh rate.
  Tried to adjust some lower resolutions, but the twinkle remained (not to mention that I prefer to keep the native resolution of 1920 x 1080 for my monitor). The NVidia driver allows only 60 Hz refresh rate at 1920 x 1080, so I couldn't change that.

  (3) make sure that the computer laptop AC adapter / CC and the monitor are connected to the same wall jack and are on the same power expansion card.
  Tried, but it does not solve.

  (4) run an extension cord to another circuit of power supply in my house and to the AC adapter and the monitor of this to see if its something wrong with the wall socket using im.
  I tried connecting to a wall in my laundry, but does not resolve it.

  (5) try using a different power expansion card and nothing else is connected on the power adapter and the monitor.
  Tried, but it does not solve.

  (6) get a pin 3 to 2-prong adapter, so the power adapter is connected to the Earth is no longer.
  Most of the people on the web seem to say this corrects the problem, but I don't know how it is safe to leave this way long term. Especially, when stories of mobile phones capture the fire are multiplying.

  (7) get an adapter to generic brand as they sometimes solve the problem better than the Toshiba power adapter grounding.
  Yet once again, I would avoid this option rather than even the most generic brands cost dear.

  (8) remove the battery and run its own from the AC adapter.
  Tried, but it does not solve.

  9) play with the settings of monitors.
  Tried, but none of the settings fixed it.

  So, what are my options?
  Is there a known cause and the solution to this problem?
  If my laptop is still under warranty, can I get a replacement AC adapter / CC or something to work around this problem?

  Thank you

  Post edited by: shaneh20

  Post edited by: shaneh20

  Hello!

  Thank you for your comments, it s very interesting.

  If you have any other questions, they are welcome in the forum.

  Good bye

• Tecra A20 + external mouse problem

  Hello, I have some problem with a Tecra A20 which is connected to a docking station. If I start the laptop with the lid down and you start Microsoft Outlook the left button of the mouse on the external mouse acts as a right mouse click (the right button of the mouse serves as a right-click). Only, the fault occurs in Office applications and does not appear when the laptop is started when the cover is opened. I tried to reinstall all drivers for mouse/touch pad, Toshiba software and office software. I've also been through all the power save and docking of parameters, but the problem persists.

  Hello

  I use in my office series Tecra M with docking station and external keyboard and mouse. I have gift? t know how it is pre-installed in your case, but with my external keyboard and mouse, I myself? (troisieme party software? allows me a configuration complete external mouse.

  Is the same situation in your case?

• NB200-10Z connection external monitor problems

  Hello

  I tried to connect my NB200-10Z to my LCD TV using a VGA - DVI connector. Now, I have connected my DVI cable into the socket, then the TV.

  For some reason any TV is not recognized by the netbook. I tried the FN + F5 key and it only shows the lcd - associated with the netbook screen.

  I thought that maybe I need an update of the display driver, but it seems that I have the latest version (6.14.10.4926)

  Rebooted the system, no effect.

  I used to have my other laptop connected to the TV before, so the problem must be with this netbook.

  Any idea?

  Enjoy your thoughts...

  See you soon,.

  Richard

  Are you running XP or Windows 7 starter edition? With Windows XP, right-click on an empty spot on the desktop and click Properties and click the resolution tab and there you can set the second monitor, sometimes you need to use the icon next to the clock that is the video properties intel to extend the monitor...

  If you are unning Windows 7 Starter it does not support the extended monitors only mirrored...

  HTH,

  The f

• Tecra M5 - external monitor (TV) graphics in black and white

  Hello

  I have my M5 connected to a TV via a SCART (s - video-> adapter SCART).
  Everything works very well (including sound), except that the image is the B & W.
  Whatever I do, I can't get it color.

  When I S - video-> s-video color (in projector) is fine.

  The clues as to what I could do to get a color picture on my TV?
  (M5 2Gb, Xp Sp2)

  TFAI

  Just answer. We're not the assignment of the cable pins SCART. I had the same problem with my TV. There was a black and white photo and I don't know why.
  I checked the contacts and moved the cable up and down and for some reason, the colour appeared. Then I tired 3 cables SCART different and to have worked.

  Maybe it helps.

• Communication with the external monitor problem

  When watching a video or tv content on the internet via our hdmi tv, after some time, the screen goes black, a few moments later, the sound turns off, then the laptop restarts. This does not happen if I look at the content that has been downloaded to the laptop then played through the TV. The error message that appears in Event Viewer is the following:-

  Log name: System Source: Microsoft-Windows-DistributedCOM Date: 16/09/2016-16:53:11 event ID: 10016 task category: no level: error keywords: Classic user: computer ACER_LAPTOP\Hilary: Acer_laptop Description: the machine default permission settings do not grant approval to activate local for the COM with CLSID {C2F03A33-21F5-47FA-B4BB-156362A2F239} server application and the APPID {316CDED5-E4AE-4B15-9113-7055D84DCC97} the user Acer_laptop\Hilary (S-1-5-21-862588424-839220286-1550613147-1001) SID address LocalHost (using LRPC) running in the container of the application Microsoft.Windows.Cortana_1.6.1.52_neutral_neutral_cw5n1h2txyewy SID (S-1-15-2-1861897761-1695161497-2927542615-642690995-327840285-2659745135-2630312742). This security permission can be modified using the Component Services administrative tool. The event XML: 10016 0 2 0 0 0 x 8080000000000000 22079 system Acer_laptop machine-default local Activation {C2F03A33-21F5-47FA-B4BB-156362A2F239} {316CDED5-E4AE-4B15-9113-7055D84DCC97} Acer_laptop Hilary S-1-5-21-862588424-839220286-1550613147-1001 LocalHost (using LRPC) Microsoft.Windows.Cortana_1.6.1.52_neutral_neutral_cw5n1h2txyewy S-1-15-2-1861897761-1695161497-2927542615-642690995-327840285-2659745135-2630312742

  Can someone tell me what is the cause and how can I solve this problem? Thank you.

  Thought I would let you know that, by chance, I came to find the fix on the Microsoft Community website.

  The issue might be related to display drivers and try again the steps to uninstall graphics cardin Device Manager, uninstall the drivers of device from the list of programs, and then download the latest drivers from the manufacturer's website.

  Step 1:

  Uninstall the device from Device Manager

  • Open the Device Manager
  • Expand the section of the graphics card .
  • Find the Display card Driver.
  • Graphics Driver right click and choose Uninstall.
  • Select the check box delete the driver for this device.
  • Restart the computer after the uninstall is complete.

   

  Step 2:

  Uninstall the drivers of device from the list of programs in the control panel

  • Click Start, select Control Panel
  • Now, click on programs and select programs and features.
  • Find the Display card Driver.
  • Display driver card click right and select Uninstall.
  • Restart the computer after the uninstall is complete.

  I tried and it seems to have worked so far. Fingers crossed!

  Thanks for your advice. Maybe this will add to the knowledge base for future issues.

  H

• External monitoring problem

  I have a Canopus ADVC-300 that I use as a box of firewire to my external supervision.  I use it with success every day with Sony Vegas and Adobe After Effects.  But for some reason, I have not been able to make it work with any version of Premiere Pro.  I have the Collections Master CS4 and CS5, so I have the two Premiere CS4 and CS5, and no work.  When I go into Preferences > player settings, the only option I have in the menu dropdown is Adobe Player, there is no option OHCI IEEE or DV, just Adobe Player.  Under sequence settings > playback settings, there is an option for DV: 23.976 720x480p peripheral, but the selection that doesn't seem to work.  I don't know that it is important that the option is in the settings of the sequence because I am not able to access the device in the Preferences section.  I know that Windows is seeing the unit because when I turn it on, an AutoPlay opens and gives me options for the use of my video camera, and it works really well with After Effects and Vegas.  If the thoughts?  I'm looking in the right places to ensure that first is to see my device?

  Thanks for any help or suggestion!

  You use the material/GPU acceleration with MPE? If so, you must disable the GPU acceleration; Output DV does not work when the GPU is in force.

• Tecra S1 - display problem, even on external monitor

  One day I was using the laptop, surfing the net normally, everything was fine and suddenly the screen went bad... (photo below). I tried using an external monitor and still the same, so I'm sure that my monitor is fine and it is probably a problem of display card?
  I tried to update my display card driver and no luck, so I decided to use the recovery CD to restore the system and no luck once again.

  Here is a screenshot after the system restore... y at - there a way to fix this without taking it to a service center?
  Thank you
  Link: [http://i130.photobucket.com/albums/p262/ctb205/mon.jpg]

  Hi borist,

  It s really great that you could post a picture of your problem. Thank you!
  In addition, you have already tried a lot of as the recovery facility and an external monitor.

  Unfortunately, it seems to be a hardware malfunction of graphics card. :(

  This means that you will need to swap the motherboard because the graphics card is fixed on it. Motherboard is a party quite expensive and Tecra S1 is old notebook then maybe you can get a second hand or laptop motherboard on eBay and swap it out.

  Good luck! :)