USB wireless mouse input driver Installation file missing

Similar Questions

• Cannot update USB improved controller installation file missing

  I get the same message c200 series Intel (r) chip set family improved USB control-1c2d driver installation file is missing INF written by windows 95 or later. There are two of them, I tried to uninstall, but they keep coming back. I have a gateway DX4860 it has 8 ports usb but now both work. Can anyone help me please with this problem? I am running windows 10. Thank you for your help.

  I tried the right click on infinst_autol.exe and this time I clicked on windows 8, he ran all the downloads and then I clicked on Device Manager all my USB are busy. I checked, updates, everything is up-to-date. Thank you very much for your help. Thanks again.

• Satellite Pro M70: disable the touchpad when you use a USB wireless mouse

  I want to disable the touchpad when you use a USB wireless mouse. Can someone tell me how to do what you please?

  Hello

  Open the control panel-> mouse. There should be an option to disable the touchpad.

  Good bye

• HP 802. 11b / g wireless network: HP 802. 11b / g wireless network adapter driver installation problems

  After installation of Windows 10 does not work me wi - fi, I can not find a compatible driver. The search I found one, but it gives me driver installation problems

  Hello @fede95,

  Thanks for posting on the Forum of HP and welcome!

  I'd be happy to help you with wireless driver problems you encounter since the upgrade to Windows 10.

  I will need to know your product number. You can follow the steps here - http://ow.ly/XnZL300dhzo - to find.

  I'm looking forward to hear back and work towards the resolution of this problem.

  If these steps solved your problem, please click "Accept as a Solution." You can also click on the "congratulations, Thumbs Up" on the right to say "thank you!"

• the Magic Mouse that came with my iMac to work but it does not recognize HP USB Wireless Mouse

  the Magic Mouse that came with my iMac to work. I tried to use the HP USB mouse that I use with my MacBook Pro at home, but it does not recognize. I went into the settings but it only sees the mouse Magic Mouse.  I tried configuring it as a PC mouse.  How to recognize the USB of the computer mouse.  I need a HP bluetooth mouse?  I can't work with this mouse, it has a funny scroll for it. It is too fast or too slow.  Help!

  < published by host >

  There is no reason why the iMac should not be able to use a USB mouse. With the mouse connected to the computer off the computer tower and turn it back on. Now it doesn't recognize the mouse? If this is not the case, try a SMC reset.

  Reset the management system (SCM) controller on your Mac - Apple Support

• Trying to keep my USB wireless mouse to wake the computer, 927821 is not working-still no power management tab

  Mouse bumps keep wake-up computer. Equipped with Windows Vista. I followed the step in Device Manager... a right click of the mouse... properties... still no power management tab

  Answered my own question! FYI... I put a ps2 converter on my usb mouse (usb Bank was full at one point). There is no power for ps2 Management tab only mouse to usb, remove the adapter and the Panel under the mouse-hardware(select HID mouse)-properties-power management, was able to turn off "WAKE".

• 8 flow HP will connect with wireless mouse

  I'm 8 HP flow. I need to get a wireless mice for my (Windows 8.1) Tablet PC for an upcoming event.
  
  First of all, I need to know if the 8 workflow HP will work with a mouse and display (the mouse pointer) on the computer screen.
  
  Second, I need to know what kind of mouse will work with it (Bluetooth, wireless, wired, other).
  
  And finally, how do I connect the mouse with my Tablet PC.
  
  Thanks in advance for your help,
  John W
  
  

  I have 8 HP flow, recently I bought HP T800 Bluetooth Keyboard box. The only thing that was missing was the mouse. I tried to use the usb wireless mouse, but used only available for the receiver usb micro usb port mouse.

  The best solution for this is to buy the bluetooth mouse wireless, available with HP and Logitech M557.

• Wireless mouse does not work after update Vista graphics driver

  Hey whats goin' I'm looking for a little help here Irecently downloaded a new graphics driver on my laptop and rebooted... suddenly all OOF, mouse not working anymore... What do I do?

  * original title - my wireless mouse died after I downloaded a driver what should I do? *

  Hello

  The video driver may be accessory to the mouse does not.

  Reboot again. If the mouse still does not work, check the batteries in the mouse and receiver
  connection. To the need to update or reinstall the mouse drivers - check with Microsoft Hardware, LogiTech
  or anything done to the mouse for the latest drivers.

  ==================================================================

  If this seems to be a USB problem AFTER the foregoing:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• the installation files that are necessary to control a 33210 agilent has via USB

  Hello

  I'm trying to control agilent 33210 via USB to a produce an arbitrary waveform using labview. The installation files I need? Obviously labview 86, ivi specific driver for 33210a, and? After you install labview 86, the program prompted me to install pack pilot devices, which I did, but he asked for disk 3 that does not exist in the package, I downloaded on ni.com.

  BTW, is there a guide on where to go from there? I'm more c/matlab programming and graphic...

  Thank you very much

  Hi User2009,

  Once you have installed LabVIEW and NI-VISA, you can do the rest of LabVIEW.

  The simplest process is:

  1. Go to tools' Instrumentation' find instrument Driver and to use the finder driver tool to download and install the appropriate driver (I recommend getting the pilot LabVIEW Plug - and - Play project).
  2. "Once you have installed the driver open the example finder and navigate to hardware input and output" Drivers of instruments ' LabVIEW Plug and Play and find an appropriate example.
  3. Select your device and run the example to make the work of communication course.
  4. Use the example as a starting point and make any changes you need.

  I got to have an Agilent 33120 at my office, so I recorded a quick video for you to the process described above.  I use GPIB, but the process must be the same for USB.

• I would add a wireless keyboard to a 'double Receiver USB' for a wireless mouse.

  I have successfully installed the small 'Inteli-mouse' (microsoft mobile 6000 wireless mouse) by using the center of update online that I was sent to when I inserted the installation CD. I like the small USB receiver, is it possible to update the driver, so I can also use my "Microsoft Wireless Keyboard 700 V2.0" with this USB receiver? I am running "Windows 7 Home Premium 64 bit on an HP G71 laptop. I like the wireless keyboard because the screen is great & because of some physical problems I can keep the keyboard closer to me and the screen further when the House. It's not important, I wondered? Thank you, KC973

  Hi KC973,

  Welcome to the Microsoft Answers site!

  You will not be able to add a wireless keyboard to a 'double Receiver USB' for a wireless mouse. To use the wireless keyboard, you can use the receiver that came with the key board and the receiver double USB mouse will not recognize the wireless keyboard.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Driver installation error: the system cannot find the specified file.

  I recently bought a Logitech G930 Wireless Gaming Headset and I don't get the "system does not have the specified file." When I try to install the drivers for the device.

  I installed the software on the CD and the software that I downloaded from the download page on their Web site. The drivers for the volume etc. scroll work, only Audio USB driver that does not work. I tried to clean up the temp, restore to a point of restoring etc., same problem. Unable to get all the sounds so far. I have no changes that would address the issue that I know, and I've been redirected here by Logitech support staff that I was able to install it on another PC.

  Help is very appreciated.

  I solved.

  Created the
  C:\Windows\System32\DriverStore\FileRepository\lgsh_usb.inf_amd64_5d791964aedb188e\
  folder repeatedly mentioned in the newspaper and copied all the files there. Then do the driver installation program find the driver in the C:\Windows\System32\DriverStore.
  Credits http://www.ocztechnologyforum.com/forum/showthread.php?106837-Cant-install-driver&p=765465&viewfull=1#post765465
  ^^ Kudos to this guy.

• myRIO analog input express file missing VI (n samples)

  Dear users,

  I'm reading of analog data with an express VI in myRIO. This works with analog input (1 sample), but fails with analog input (n samples) due to a file missing "myRIO v1.1 FPGA Throughput.lvbitx".

  I Googled it and searched on ni.com, but nobody seems to have the same isssue (I guess because of the myRIO is quite new at this time)

  Thank you!

  

  

  OK, now we have a solution. The problem is, that the high-speed FPGA personality is not part of the default installation. You must download the NOR broadband add-on for myRIO 2014 (which is of ~ 20 MB) and now it works. The download link is: www.ni.com/download/ni-myrio-software--2014/4938/en/ .

• "Lenovo USB avdio" drive installation of drivereasy

  Before Drivereasy downloaded the driver, the choice is to install their own, but also can not find the installation files, after decompression can not see the installation files, I put the download files are deleted, but re download suggests that an error has occurred, do not know what to remove, to solve.

  

  In the "drivereasy" also long the download to complete the "lenovo USB Audio" will jump in the error message, the other drivers can be downloaded. As if the path is bad,

  Hello

  You do use a 3rd party driver update of programs.

  You get your drivers of Lenovo, Lenovo IF is the manufacturer of your machine.

  Lenovo:

  http://support.Lenovo.com/en_US/downloads/default.page#

  See you soon.

• During the installation of a wireless mouse, the 'New Hardware Wizard' appears unnecessarily!

  During the installation of a wireless mouse, the "New Hardware Wizard" pops up, and more than a half a dozen times looking for the pilot.  I installed the driver from the disk provided by the manufacturer.  Actually, the mouse works correctly and doesn't have another driver not found.  Someone has suggestions for the "new hardware found" stop?

  Hardware devices do not work or are not detected in Windows

  Does that help?

• Cannot open the adapter ethernet USB Vista installation files

  How can I get the driver to install properly iof I can install it from the disc it came to drom. I went to the site, the same set of files and I can not open these either. You searched for openers sys files none of them worked.

  USB ethernet card. I can not open the installation on the sisk files to install properly.

  They cannot install as with other programs.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should do all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  If you can't find the drivers that will install, then you must contact the manufacturer's technical assistance service to explain the problem and get instructions on how to install the drivers they provide.  We cannot help you here because it is their product and their record and we know almost nothing about how their files are created or how they are intended to be installed (or if the device and drivers are compatible with your version of Vista).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.