Use however radio Spotify

Similar Questions

• Cannot use iTunes Radio with my new Apple ID HELP!

  Help!

  cannot use the radio with my new id

• Using HAM Radio frequency remote desktop

  Want to connect to 2 - PC is using Windows OS, such as remote desktop, but use frequencies Radio HAM vs Internet/Modem.

  The location of 2 PC (laptop) is solar powered, no Internet-WiFi-phone line.

  In the HAM Radio world I can connect/communicate between 2 radio using a transnational company, it's a Modem RF (Radio frequency)

  connected to the PC CommPort or USB, 2nd Comm Port connects to Ham Radio. The problem is to communicate this way

  It software, not those software allow to join me / Shell to / Windows desktop.

  Any idea welcomed all, Jeff Drescher KF4OYP thank

  http://www.TAPR.org/pr_intro.html is the best place to look for information.  If you are a packet radio operator you must already be aware of this web site.

  As the bandwidth for packet radio networks is limit to about 9600 bps (the modem speed), I suspect THAT DRC on this type of link would be very slow.

• Hello! I am a fashion design student and my school offer us a wide range of Adobe programs. I asked the Redemption Code and I have but when I try to enter it know this code is already in use however the Photoshop and Illustrator that I already

  Hello! I am a fashion design student and my school offer us a wide range of Adobe programs. I asked the Redemption Code and I, but when I try to enter on behalf of the school know that this code has already been used however the Photoshop and Illustrator that I already have on my Mac do not work. Before you begin the school pack, I used a free version and so now I see that my free version is over but I can't use the pack of the school that gave me. How can I start using it?

  Hello

  Please see redemption code help

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• How connect wireless Speedlite 430EX III - RT for EOS 7 d Mark II using wireless radio signal?

  I just upgraded from a fighter to a 7 d and am sure he has the ability to use wireless for my Speedlite 430ES III - RT radio signal.  Unfortunately, I've exhausted myself trying to get them to connect.  If anyone has had the same issues, or have a solution to my problem or even have a link to a good video for the Speedlite & 7 D, I have?

  I watched a lot of YouTube videos and seem to have all the settings correct-channel, master/slave, A, B, Group C parameters, the unit is set for the wireless.

  Help please and thank you.

  The 7 d II can control only wireless Speedlite 430EX III - RT optically via its pop-up flash but not via radio signal.  So you can either get an another Speedlite 430EX III - RT or a dedicated controller ST - E3, mounted on the hot shoe of the camera.

• I can no longer use Internet Radio.

  When I click the icon for a station, I only get a file download dialog box labled, asking "do you want to save this file?, playStation.wax name, type Windows Media Audio shortcut, to www.windowsmedia.comand either save or cancel.»  At the bottom of the dialog, as comment by windows security, in part, "the file you download cannot be opened by default.  It is either corrupt or has an incorrect file type. "Internet radio worked fine, until I did a recent media player update, in response to the notice that an update is available that popped up on my screen. I tried to select the radio station by clicking on "listen" rather than the icon, and I get the same answer.  I can stream audio to go directly to websights and other sources. Simply not Radio Internet of Media Player options. I use Media Player 11.

  Hi Wildhiker,

  Thank you for using the Microsoft Windows Vista Forums.

  I will need some additional information to help you best.

  O the update caused the problem?

  O where and how is the media player update?

  Ø you are able to use Windows media player to play other media files without any problem?

  In the meantime, follow the instructions below that may help you resolve the issue.

  Method 1:

  Let us check if you are able to play the audio and video with Windows media player.

  Method 2:

  Try installing codecs and check whether the problem is resolved.

  You can use your favorite search engine to download and install the Codecs.

  Click on the link below for more information on codecs.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Check whether the problem is resolved.

  Method 3:

  Uninstalling and reinstalling Windows Media Player:

  1. click on start and in the search type "Turn Windows has or not.

  2. click on "Turn Windows features on or off".

  3. search for multimedia and uncheck the brand in the face of Windows Media Player.

  4 restart the computer

  5. click on start and in the search type "Turn Windows has or not.

  6. click on "Turn Windows features on or off".

  7. go to Media features and place a check mark in front of the Windows Media Player.

  8 restart the computer.

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• BlackBerry Q10 no sound through ear buds using Blackberry Radio

  I have a new Q10 with the new software of today. The problem is regular FM works fine and I downloaded Blackberry App regular FM Radio still works very well, but the new application of radio does not play.

  No idea. I never used it. Generally, those are Internet radio apps and simply stream music apps.

• Obtain / use value radio in Apex plugin for dynamic action button

  Apex 4.2

  I'm working on a plugin that you run a dynamic action based on the value of a selected option button. I think its more so the syntax that is causing me problems.

  I have a point page (P127_DISPOSITION) reprsented as a group of radio buttons. There are three cases for the Group of radio buttons: CREATE, update, and THROW. The LOV source for the element on the page is:

  STATIC2: create new Inspection; CREATE, update of existing Inspection; Updated, throw; IGNORE

  I have a plugin that displays a map and a few other neat, tools and toolbars other clever tricks. When a user clicks on the radio button under the UPDATE, the card must hide some of these tools. This part is not so bad that I have the code for this. Here's what I or tried so far:

  $("#P127_DISPOSITION").change(function() {
  if ( $("#P127_DISPOSITION").val == 'UPDATE' )
  $("#draw_point").hide();
  $("label[for=\draw_point\"]").hide();
  } else if ( $("#P127_DISPOSITION").val == 'CREATE')
  $("#draw_point").show();
  $("label[for=\draw_point\"]").show();
  } else {
  $("#draw_point").show();
  $("label[for=\draw_point\"]").show();
  }
  });
  

  The statements in the IF statements are not the problem. I tested and been using these statements in my plugin for other reasons. These statements just to show or hide the toolbar. But I'm doing this action happens dynamically on a radio button is selected. So I know there must be some problems in the way I use the onChange function or the statement real himself.

  Any help on this would be greatly appreciated. Thanks in advance.

  NewApexCoder

  I don't think that your problem is with dynamic action, but how the html code that is generated when the plugin looks like.

  If the generated html code is not a type of entry right front, you need to write your own javascript code that overrights the apex.item () .getValue (default).

  To explain what I mean lets take a look at the native radiogroup and popup lov.

  A radiogroup of point P40_DISPLAY_RETURN of the page html code looks like

  
      
  Different display and return value
      Cat
  
      Cow
  
      Dog
  
      Lion
    
  

  As you can see the element with the id P40_DISPLAY_RETURN is the set of fields. Because the set of fields is not a value attribute neiter $x('P40_DISPLAY_RETURN').value and $('P40_DISPLAY_RETURN').val)

  the value will give you. Apex. Item ('P40_DISPLAY_RETURN'). GetValue() will return the C.

  And for the lov contextual element P40_POPUP_LOV of the HTML page looks like

  Now the P40_POPUP_LOV element is an input element, but the value is the value to display. So $x('P40_POPUP_LOV').value and $('P40_POPUP_LOV').val () will give you the display value ' OHare, Edward "Butch" While apex.item('P40_POPUP_LOV').getValue () returns the return value 4.

  Take a look at the getValue for both javascript code, you see that the functions are actually different and depend on the widget that is the element.

  getValue : function() {
    // get checked input value, in the context of the fieldset
    // note: can't use $lRadios here because this is a reference
    // to the initial state
    var lReturn, $lRadio;
    if ( pType === "checkbox" ) {
        // checkbox will return an array
        lReturn = [];
        $( ":checked", lFieldset).each( function() {
            lReturn[ lReturn.length ] = this.value;
        });
    } else {
        // radio group should return a single value
        $lRadio = $( pSelector + " :checked", apex.gPageContext$ );
        if ($lRadio.length === 0) {
        // check if the length of the jQuery object is zero (nothing checked)
        // if so return an empty string.
            lReturn = "";
        } else {
            // otherwise return the value
            lReturn = $lRadio.val();
        }
    }
    return lReturn;
  }
  

• Get the status of a Department in a popup by using a radio button

  I have a use case. A page with a button. The user clicks on this button, and then a pop-up window will appear showing the table of departments. The user will choose the desired radio button. After that, the popup closes and the list of employees should appear in the page.
  
  I wrote a method in the property valuechangeevent of the option button (autosubmit is also set to true), but still I'm not able to get the current line. I need actually value departmentid.
  
  Can someone guide me?
  
  

      public void onClickRadio(ValueChangeEvent valueChangeEvent) {
          // Add event code here...
          System.out.println("onClickRadio Begins");
          hidePopup("p1");
          DCBindingContainer bc =
              (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
          DCIteratorBinding iter =
              bc.findIteratorBinding("DepartmentsView1Iterator");
          Row row = iter.getCurrentRow();
          Number departmentId = (Number)row.getAttribute("DepartmentId");
          System.out.println("departmentId: " + departmentId);
          OperationBinding method =
              (OperationBinding)bc.get("displayEmployeeTable");
          method.getParamsMap().put("departmentId", departmentId);
          method.execute();
          AdfFacesContext.getCurrentInstance().addPartialTarget(empTable);
          System.out.println("onClickRadio Ends");
      }

  JDev 11.1.1.6

  You can try with autoSubmit = true on selectBooleanRadio?
  Also set the group to a text attribute in your selectBooleanRadio.

  Of tagdoc -.

  in all cases, you must set the group attribute.

  http://docs.Oracle.com/CD/E23549_01/apirefs.1111/e12419/tagdoc/af_selectBooleanRadio.html

  Published by: Sudipto detrilles on May 21, 2013 03:52

• Using a radio button with a calculation

  Hello

  I have a question of calculation for the group.  I'm trying to calculate creatinine clearance.  Sounds easy, but I'm stuck at the end.

  creatinine clearance is: ((140-age) * weight (kg)) / (72 * Scr)

  Women are multiplied by 0.85 to get the final result of creatinine clearance

  I have a box for the age, weight and scr and the user has entered the number.

  Here where I'm stuck at is the end... I have a radio button for women so that the result is multiplied by 0.85.  I thought that something like this might work... but nothing helps.

  var crcl2
  CrCl2 = (140 - this.getField('age').value) * (this.getField('weight').value) / (72 * this.getField('cr').value);

  var crcl3
  function validate (carbbox)
  {
  If (carbbox.checked == 1)
  CrCl3 == crcl2 * 0.85;
  on the other
  CrCl3 is crcl2;
  }

  Im kinda new to this obviously... any help would be really appreciated.

  Thanks, chris

  Unless you repeat the calculation in function in several places with different values or you want a funciton of type library which could be adeed to other forms, use of the service may not be necessary.

  Event.value = "; assume not performed calculation
  perform the calculation if the divisor is not equal to zero
  If (this.getField('cr').value! = 0) {}
  adjustment for sex
  var adjGender = 1;
  If (if (this.getField("carbbox").value == 1) {})
  adjGender = 0.85; fit for the female sex
  } / / end of adjustment for sex
  calculate creatinine clearance
  Event.Value = (140 - this.getField('age').value) * (this.getField('weight').value) / (72 *)
  this.getField('cr').value)) * adjGender;
  } / / end of calculation

• How to use a radio button state to calculate a value in another field

  I produce a registration form that uses radio buttons to specify an accommodation meals and requirements for individual registrants - separate option buttons select the meal (YES or NO) plan and the type of accommodation (NO THANKS, A, B or D).

  I want to ask the State of these boxes to option and, if selected (set), calculate the amount to pay for registration in the related areas of subtotal ( Plan -meals and accommodation).  In other words, based on the costs of $ for YES, A, B and D on a per Member basis, I want to enter an amount of $ in the subtotal fields 'meal Plan' and 'accommodation'.  In the ABSENCE or NO THANKS is selected, no calculation is necessary.

  The form attached, if a given registrant (for example Reg01) chooses to include a meal plan (selected option button M01-Y ), then in the numMEAL subtotal field must increment of $80.  Similarly, if Reg01 wants to book a double room (R01-D) I want to add $268 for the subtotal numROOM field.  It goes without saying that the numMEAL and numROOM fields must reflect the cumulative amount based on the requirements of all listed registered (Reg01 via Reg05)

  Example:  I want to use a FormCalc calculation something like... (If M01 - Y is set then $80) + (if M01 - Y is set then $80) + etc ... to calculate the value of the field numMEAL and any other equivalent expression for the numROOM field.

  Also (but don't feel you have to answer), in the design-time view how to configure to display radio button selections No. or NO THANKS as the default selection (set) such as the other buttons in the PLAN of FOOD groups and the TYPE of ROOM are not selected (not set) - (I think that would correct indications of error that I see).  I managed to configure this radio button state initial for groups TYPE CITIZENSHIP and PAYMENT of the form but can't seem to do for groups of PLAN of MEALS and the TYPE of ROOM .

  Thanks in advance for your help.

  I think this is what you wanted... .view attachment. The problem with multiple selections in Design view is cause-in the name. I changed it to the rooms because it is to be interpreted as a subtraction. You must change them in meal option buttons as well and that will clear up the design problem you mentioned.

  To get the room to add correctly, I changed the value for the room price. Then on the event rentals field calculate I simply add all room radioButtonList. The calculate event fires whenever a room is changed. For meals, I put the code on the RadioButtonList to every meal (just to show you a different technique). You could od it exactly the same way as the rooms but it is up to you.

  Paul

• How to use the Radio button

  Hello
  
  In my form, I want the radio button.
  
  On the selection of this radio button user can change the status of "QC" for "STOCK".
  
  Initially, when he disabled status should be "QC".
  
  How to put this in my form guide me please.
  
  
  Maury

  Make a group of Radio (say RADIO_GROUP16) with 2 buttons radio (mean RADIO_BUTTON17 and RADIO_BUTTON18).

  Specify the initial value of Radio group to U
  Specify the value of Radio to R and U buttons

  and in the status field to write after outbreak.

  If: block. RADIO_GROUP16 = 'U' then
  message ("can not update status '");
  raise FORM_TRIGGER_FAILURE;
  end if;

  I guess that when you select the second radio button (with the 'R' value) then only you would be allowed to change the status.

  Please check the answer correct/useful if th answer was helpful

• Chart with several selections of text by using the radio button

  Is there a way to make a menu of radio button before the interactive export? My goal is to have a graphic with a text box inside that when page header dropped into Indesign from a library opens a menu of radio button that I can choose a category to the page. Looks like a bit of scripting and I don't know where to start or if there is an easier way to get the end result.

  You will need a script. This lot will be able to help.

  Scripting InDesign

  The script will have to set some kind of event listener that detects when a library item is placed. Where you will have the different texts depends on how many and they are likely to change.

  P.

• How to use the radio component

  Hello I had two radio buttons on the boy to say step - daughter and naned their boyRad etc. I need the code that responds to the choice on the first page and loads a different page depending on the choice, also, I need the key of Committee to warn if a choice has not been made. Sorry clicked twice more that I did not think he was going through

  Well well, the best I can say is... try to describe what you want in a logical way, one step to the next, then create a code that will follow that... code obey also long as it is done correctly. This is the part properly causing hair loss, but hair loss is forgotten when a smile replaces everything when this is finally working... suffering from battles with coding is often the key to learn. It is possible that all you had to do for the code was previously to get rid of a couple of braces and set the conditional statements to have is ' s...

  function buttonClicked(event:MouseEvent):void
  {
  firstName = firstTxt.text + ""; extra space to save effort later
  lastName = lastTxt.text;

  remove the two braces here to make a complete function

  If (aTa.text == "boy1") {}
  gotoAndStop (10);
  } ElseIf (aTa.text == "girl1") {}
  gotoAndStop (5);
  }

  welcomeTxt.text = "Welcome" + name + name + "click here to begin";
  }

• 'Radio' using the access point

  Hi all

  Is it possible to use a radio for mobile users and another radio station for laptop users in AP... ? If possible how do we proceed?

  Thanks in advance

  KVS

  Well, if you talk to users on like the 2.4 and mobile users on the 5 GHz, of course. You would need two separate SSID and assign them to who ever radio, but not really a good idea. How much house/AP wireless routers have been done initially, but I don't see why you would do that. If you wanted to divide the different devices, just use the different SSID and can then choose what radios they join. Some devices could do support the 2.4 ghz and the 5 GHz so that you limited.

  Sent by Cisco Support technique iPhone App