Use of the high - standby.exe and imageres.dll

Similar Questions

• I am trying to install some Elements 9 on a new computer. I downloaded the files, .7z, .exe and run the installer. When I try to open the items, I get an error message "please the product using Setup.exe in the root folder of installation/uninstallation.

  I am trying to install some Elements 9 on a new computer. I downloaded the files, .7z, .exe and run the installer. When I try to open the items, I get an error message "please the product using Setup.exe in the root folder of installation/uninstallation. I did it

  Hello

  Please see error: 'Please install Adobe installation using Setup.exe' when you install non-English versions of Adobe Creative Suite 3

  Hope that helps!

  Kind regards

  Sheena

• Error: the registry settings used by the iTunes for importing and burning CDs and DVDs are missing.

  Original title: the registry settings used by the iTunes for importing and burning CDs and DVDs are missing. This can occur as a result of installing other CD burning software. reinstall iTunes

  I've loaded and discharged Itunes 5 times and still get the same error message box. This error does exactly what he says, I can not burn anything in my itunes library. ITunes worked great in XP-3 no problems. It will not work on Windows 7-64.  I can download and play songs from any site, but can not burn anything.  And I don't have any other burning software on my CD PC

  Hello PohlCat,

  Given that you have uninstalled and reinstalled iTunes without correcting the problem, it may be with a 3rd party product causes a problem.

  I would look at the post here to see if this solution can help you. It's from a 3rd third party site, you should use at your own risk, because it has not been tested, but seemed to help others with the same error that you are experiencing.

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Can I use other Adobe ID instead of the Adobe ID, used for the command to install and activate the Photoshop CS6?

  Can I use other Adobe ID instead of the Adobe ID, used for the command to install and activate the Photoshop CS6?

  Thank you

  Only ID authorized to use the software is the ID of the software license.

  Transfer an Adobe product license

• Scchose.exe use of the high ram and RAM ghost.

  I recently updated my 12GB to 16GB ram then I noticed Svchost .exe raised usuage (389 848 KB) RAM, the process is bound to Wlansvc UxSms, TrkWks, SysMain, PcaSvc, Netman, hidserv, AudioEndpointBuilder. All with PID 1480.

  Also the use of the ram in the task manager must be wrong, since the use of the ram is not were close to 55% of total ram installed (8 GB).

  The system seems clean so scanned by McAfee and Windows Security Essentials.

  Well actually, after I done things as checked all disks and reinstalled the MacAfee and a few other drivers. Use you RAM has improved somewhat (30% off), since there is not much question now and running while trying to save the settings actually used resources more CPU and RAM I wanted (can not play LoL and slow navigation on IE). So I guess for now I'll put that aside until I have again RAM RAM (16 GB is maximum, you can get on a laptop I think).

  However I discovered that when I hit F8 and try to repair windows. It will slide in to bluescreen says unmountable_boot_volume... I guess I'm going to have to look into that one.

• Use of the UC SVhost.exe

  Process Explorer running indicates that one of the files SvHost.exe has use of the CPU by up to 50% or more.

  From time to time I get high utilization of the processor with internet explore 11 and widows Explorer of Windows Services.

  My computer gets very hot or warm even during the execution of any browser.

  Windows Update search constantly updated it never finds.

  Please take note - what happened since I went back to my computer to its original factory condition.

  Please advise on what should I do to rectify the problem.

  Concerning

  Eflynn

  You're welcome :)

• Use of the high memory on Windows 7 without reason...

  Hello, I had recently a few problems with my computer after going on vacation for a week and turn it off.  When I got home my computer has had some problems of high memory use, I have no idea why.  I looked in my processes tab and it shows that Svchost.exe as the highest [150K] usage, but is not a lot to slow down computers.  Nothing else under it attracts a lot of use, I tried to disable my anti-virus [Norton] and it still didn't work.  All my drivers are up to date.

  Data sheet:
  
  
  Dell Inspiron 560 [2009]
  No upgrade graphics card
  64 bit
  Pentium Dual-Core CPU E5700 @ 3.00 GHz 3 .00GHz
  4.00 GB memory installed
  
  

  Hi Daniel,

  Please follow the methods:

  Method 1:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  Scan your computer by using the Microsoft Security Scanner by clicking Download now to check if there is no virus:

  http://www.microsoftsafetyscanner.com/

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 3:

  Optimize windows 7 for better performance:

  TP://Windows.Microsoft.com/is-is/Windows7/optimize-Windows-7-for-better-performance HT

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• How to fix the driver NTSOKRNL.exe and Atheros?

  I recently installed a clean version of Windows 7 Home Premium 64-bit SP1 and he immediately began to malfunction. I go back to the NTSOKRNL.exe and Athrx.sys drivers who, when they do not work it live with your computer, the cause of a malfunction and crashed to a bluescren. Let's all start, I contacted Microsoft to numerous amounts of time (7 times now) and all that they say to call microsoft and use their premium support that starts at $ 99 (which is out of the question I just don't have the money) I tried to call once and told them abuot the question, but they hung up when I said no. And even once when I contacted an agent via chat to support, and they kept insisting to call and I have to use the subscription for my repaired OS.

  This is quite unacceptable. I have a genuine version of Windows 7, my computer is also is no longer supported by HP, so I can't send it to their challenge because they want to pay $ 300 to do a clean installation using my version of windows 7. I would also like to make a formal complaint against Microsoft to charge customers who own Microsoft Windows and try to get help, but only are rejected due to the fact we have to pay for advanced support. What * is the following. My HP is a HP Pavilion dv7-3065dx that is a model of 2011-2012. Only, his warranty expired a year ago.

  I need help right away, because I can't use my laptop correctly, but also loss of data. For the first 5 attempts they tried to help me solve the problem, but after 5, they say I have to pay, even if Microsoft. I can also afford to use Geek Squad, or any other service to help me with my computer problem. All I want to do is repair Windows 7 without uninstall because it's a bad ISO (I used my friends since HP has no install disks)

  Sinceraly, an unhappy customer, SamGray_427

  Please, generate and download a copy of your information system (MSInfo32) file.

  How to get an information system (NFO) file for diagnosis and troubleshooting.

  https://knowledge.Autodesk.com/support/AutoCAD/troubleshooting/CAAS/sfdcarticles/sfdcarticles/obtaining-a-system-information-file-nfo-for-Diagnostics-and-troubleshooting.html

• The high water table and data files

  Hi all
  
  I just have a small question regarding high Tables in correlationi with the HWM to a data file. I have a data file that I would like to resize. At this point, I can reduce the data file of 100 GB to 70 GB which is the HWM of the data file. However, I know that I can compress probably some tables in the tablespace and assuming that these tables have extensions the datafile, will be running 'alter table shrink space,' also decrease the HWM of the data file? Or is there no correlation between the 2 HWM?
  
  Thank you.

  Note You can use alter table move and change reconstructions of index to move generally the scope used to the logical beginning of the data files. How good Oracle repacks extensions dependent measure used tablespace management and the size and order of executed moves/reconstruction. Retractable table option allocates no new extensions so it won't move that objects forward in the file.

  But again, there is very little point in trying to pack each scope to the front of the file if you cause Oracle immediately need to expand the file to store the new allowance claims. Existing free extensions in the logical HWM of the file will be reused when possible with managed tablespaces locally packaging 100% is not necessary.

  If the dictionary is indeed this reuse is more variable, but based on your previous posts, there is no need to worry about this situation.

  HTH - Mark D Powell.

• Ask about the limitation of the use of the adjustment of CPU and RAM essbase

  Hello Experts,
  
  Is there a setting that limits the high use of essbase application on the server CPU and RAM in Essbase? If so, what are they?
  
  Thanks in advance for your suggestions.
  
  Kind regards
  Sudhir
  
  Published by: 637223 on December 23, 2009 16:40

  Usually I wish I could put more resources behind Essbase, not less. Why would you do?

  Are you thinking of something like SQL Server Resource Governor?

  If you are in a virtual machine environment, high-level products VMWare don't allow guys IT fairly accurately the range up to a server/server farm and governed how much CPU/DASD Gets a virtual machine.

  Kind regards

  Cameron Lackpour

• service host: local service (small network) the use of the high drive

  Hello

  I reinstalled my laptop to avoid problems. Just after you have reinstalled windows, windows automatically updated install 3 updates. After windows update, service host: local service (small network) is frequently using the high use of the disc... Microsoft, U CREATE DEFECTIVE UPDATES...

  Specifications:

  Dell Inspiron 3421

  4 GB OF RAM

  HARD DRIVE 500 GB

  Processor Intel Core i5 3317u

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask
  
  
  Please run the trace when you encounter the problem

• If I have two PCs used by my family, one user profile can be applied to more than one PC, followed by the cumulative on both computers use if the user has access and time restrictions?

  I wish that the user profile settings to apply to both Windows 8 computers.  Thus, if a sign of user in a PC for 2 hours and their allotted time has been used for the day, I want to assure that they are unable to connect to the other PC without asking for more time.  The same applies to time restricted access, Web sites, etc... Is this possible without two separate profiles, one on each PC?

  Hello

  Unfortunately, it is not possible to use a single user on multiple PC profile, but you can have the same set of parental controls for different user accounts.

  Multiple user accounts can have the same family safety settings.

  For information on how to set up parental control and more information about the safe keeping of children using the parental control, you can check the links below.

  Set up parental controls

  Keep your children safer on the PC

  Hope that the information provided is useful.

• What systems the Pros use for the first, After Effects and SpeedGrade?

  I bought the complete creative cloud in the hope of a career for me in editing audio/visual. The problem is my system doesn't seem to be able to manage the software, especially when changing back and forth between the three programs mentioned above. In addition, my first project cannot export correctly. In addition, throughout its development the offbeat bad system. And that's after following all of the recommendations of preferences available under tutorials Adobe and elsewhere on the Web.

  Here is my system:

  SYX-P67A-C43: Intel Core i7 2600 (a unit of 8 strands) to 3.4 GHz with 8 GB of RAM (which will be soon 16) with a NVidia GTX 550 card, 1Gig of RAM.

  As you can see, it's well beyond what Adobe claims to be the minimum requirements. It is obviously NOT the case.

  What systems the Pros use (like the guys in the tutorials) for the first, After Effects and SpeedGrade? Give me accurate machines with all the specs so I can a price upward.

  Right now X 99 with DDR4 gives best performance for media applications of particular content with GPU acceleration. I suggest an I7 5960 X, 32 GB of DDR4 2666, 980GTX video card and Asus X 99 board with storage depends on the media. Far, who will perform the 2600 is old of 2 generations at this stage, which is only a Quad core with HT. The same X 99 tips can also manage the Xeons V3 if you upgrade the processor in the future for a larger load in real-time.

  Eric

  ADK

• use of the port between db and OID

  If my database with ldap.ora makes a request to the OID ldap, it communicates with the ldap Protocol (3060) or ldaps (3061)
  
  What is the Protocol and port on the way back from OID to DB?
  
  is this /ldaps ldap or tcp/ip and does go to the listening port?
  
  
  Environment:
  ------------------
  
  Databases on 11 GR 2
  
  LDAP.ora on databases:
  
  default_admin_context = "dc = mydomain, dc = com"
  directory_servers = (oid.mydomain.com:3060:3061)
  directory_server_type = OID
  
  
  OID 11.1.1.4.0
  with the repository on 10.2.0.5.0
  
  
  Kind regards
  
  Peter

  Peter wrote:

  What is the Protocol and port on the way back from OID to DB?
  is this /ldaps ldap or tcp/ip and does go to the listening port?

  LDAP is a protocol of application. As is Oracle SQL * Net, SMTP, FTP, IMAP, and so on.

  Application protocols running on a wire protocol. Generally used wire protocols are TCP and UDP. (protocols in the suite of protocols IP/Internet Protocol)

  LDAP use TCP protocol. Trivial FTP (tftp) use UDP. Etc.

  Oracle Listener uses mainly TCP - don't remember having seen the listener supporting / using UDP. The listener to turn "supporting a number of application protocols - such as Oracle Net, WebDAV, HTTP and so on." (the listener itself does not use these application protocols - incoming TCP connections are reset to the Oracle server process and these 'speak' this specific application with the client TCP protocol).

  A customer talk application LDAP over TCP protocol to a Server LDAP (for example the OID).

  A customer can talk the application Oracle Net over TCP to the Oracle server protocol - and if that customer is a LDAP server, it will always use the client default protocol Oracle Net to communicate with the database server.

  Remember that the client-server is a s/w architecture - and s/w can be a server (for example, the LDAP server) and a customer (for example the client database Oracle).

• How to remove pxx.exe, pxw.exe, and sshnas21.dll error?

  Can someone help me remove these errors of my Matthew?

  (error pxx.exe, pxw.exe, sshnas21.dll)

  It has been occurring after that I tried to download the product adobe on an unknown site.

  Hi I_M_Lerning,

  Try to check the utility (MSCONFIG System Configuration window. (EXE). If they are, find their way and delete them. Check their location in the registry as well and delete them from there, as applicable. If you need further instructions on how to do, please reply.

  If this post can help solve your problem, please click "Propose as answer" If you find it useful, mark it as useful by clicking the 'Vote as useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.