Qosimo F60 series - somebody has experiences?

Similar Questions

• eSATA disk backup for Qosimo F60

  Someone at - it recommendations for a backup drive external eSATA please. I have a Qosimo F60 with port eSATA/USB 2.0 combo

  Thank you

  If your laptop computer has an eSATA port, you can connect external 2.5 SSD or HARD disk drive to this port using a common external caddy which was equipped with such eSATA interface.

  This 2.5 eSATA caddy is especially fitted with USB port extra too.

• Qosmio F60 series not stop correctly.

  I bought this laptop Qosmio F60 series about two weeks, every time I have for the last week he was not able to close properly.
  When I try to shut down it disconnects, the screen goes black them the fan runs squarely! When I try to put just the hibernation of machine or sleep it will carry out the fine job, but when I start from that point once again it breaks/jam on screen the journal password.

  Can someone help me please?

  Hello

  Maybe did you install additional software that runs in background und blocks stop?
  Have you noticed that from day one with the factory settings?

• Na versão Adobe that I have no computador, EU can alterar o fundo do land .pdf tela para a cor cinza, isso melhora sensivelmente has experience of reading. Como fazer isso can (alterar o fundo da page e brilho of tela) nesta versão (Adobe

  Na versão Adobe that I have no computador, EU can alterar o fundo do land .pdf tela para a cor cinza, isso melhora sensivelmente has experience of reading. Como fazer isso can (alterar o fundo da page e brilho of tela) nesta versão (Adobe DC for mobile)?

  Hello

  As if we don't have an option to add the background to a PDF document. For the best end of reading, I will propose to adjust the brightness of the screen that is soothing to the eyes and open the PDF file in Acrobat Reader mobile app and tap the icon shows on the bottom of the app. Select the text reflow option and activate the night mode.

  I hope this will give you a better reading experience.

  Thank you

  Abhishek

• Why my adobe XI ser # AD006102858 has been revoked?

  Why my Adobe XI ser # AD006102858 has been revoked?

  Hi Bruce,.

  It seems that the order has been returned for a refund. You want to contact our customer service if you need assistance.

  -Dave

• I bought my iPhone 5 s by T-Mobile and 2 months left to purchase. My phone don't get re will not charge. Support Apple says this isn't the phone and replace the cable. This was done and the problem remains. Anyone who has experience of this pro

  I bought my iPhone 5 s by T-Mobile and have 2 months left on the purchase. My phone no longer accepts a new presentation. Apple support ran a diagnostic and said it isn't the phone and that I should replace the cable. This was done and the problem remains. Everyone has to experience this problem? And, if so, what was the problem?

  He likely is the phone, but you do Apple physically inspect it. Send it or take it to the Genius Bar. You can do one or the other of http://getsupport.apple.com.

• Departure of superelevation for the S5 - 1140d HP Pavilion Slimline series but has 5 amberlight with beeps

  HP Pavilion Slimline series S5 - 1140d

  Windows 7

  No error message.
  Has been changing my CPU to a new location, after move when I tried, the monitor shows nothing, but the cpu fan is running, however, the light to the central unit began with blue, then changes to light amber with beeps for 5 times followed by a pause and then the beep and light orange continues for 5 times again. I tried out the RAM and putting the back but it's still the same. Someone has an idea is coz the materials have been damaged or loose? My CPU is probably 11 months + old you.

  CN, welcome to the forum.

  I suggest start by checking all the connections inside and out of the case.  It could be as simple as a loose connection.

  The beeps are called the BIOS beep codes.  Here's a guide to help you diagnose the problem:

  http://support.HP.com/us-en/document/bph07107

  There is a section at the bottom of the page that lists the Beep Codes for different brands of BIOS.

  If your problem is solved, please click "accept as a Solution.

• Sectors defective HARD drive on the Qosmio F60 series

  Hello

  For about the last 6 months, I struggled to determine what was causing crashes repeated on slowdown on my Qosmio F60, which was aged under 2 months.

  Unfortunately I am currently not in the country of purchase and don't have an international warranty. I had to reinstall the entire operating system and all the software used (think the or not!) more than 6 times.

  Finally, I installed Norton Ghost 15.0 to be able to avoid reinstalling again and back up important data. When you use Norton Ghost I had to run chkdsk /r on the hard drive and now the real problem surfaced.

  This machine had a hard drive which behaved as if it was very old. Continous bad sectors where being generated. Which means that I had to replace the so-called new hard drive.

  What I want now is the specifications for the internal hard drive. for Qosmio F60 14 R machines. Because I don't have a domestic guarantees, I would rather replace the drive myself, than to hire a service charge.

  Concerning
  Arun

  Hello
  The new generation of mobile phones are supported SATA drives.
  You can buy HARD drive 2.5 SATA.

  By the way: the Drive Fitness Test Utility is quite nice freeware software that allows you to run diagnostic tests. You can use it to test the fitness of the HARD drive

• Satellite C series - Touchpad has stopped working Windows 8 running

  Hello

  I put t know if anyone can help.

  My touchpad has stopped working.
  At first, it only works on the login page. Now it s not there at all.

  I've only had my Toshiba C for a few days and it s the first time I used Windows 8.
  I tried F5, and I tried to go on the BIOS with F2 when booting, but used to come.

  Help please

  Hello

  Please check this Toshiba document:

  + How to change the settings of the Synaptics touchpad in Windows 8? +
  http://APS2.toshiba-tro.de/KB0/HTD3101Z30000R01.htm

  Don't forget that the necessary parameters of the touchpad are enabled!

• Does anyone know if the ACL of HP2011 series widescreen has speakers?

  The screen wide ACL of HP2011 series have speakers?

  Hello

  I believe that the link above shows wrong information on the speakers. Please use the following manual to check again (#15 page) because there are few models for the complete series:

  http://h10032.www1.HP.com/CTG/manual/c03351672.PDF

  It seems that some models have output for speakers, not integrated as mentioned in page #2:

  External USB speakers amplified with audio cable supplied (some models)

  Kind regards.

• Need driver XP for Nvidia Go7300 series Satellite has

  Hello.

  I am looking for a driver for Nvidia 7300 Go.
  My operating system is Windows XP and the problem is that the driver I have doesn't have resolution 1280 x 1050

  Hello

  The graphics driver on the European driver Toshiba page within your region of series laptop.
  If the driver doesn't supports the resolution to 1280 x 1050 can unfortunately do nothing :(

  Good bye

• HP Envy 4500 series: printers has been removed

  Help, please! I accidentally reset my settings to the printer when you try to restart my printer because it was frozen. I tried to reinstall the printer several times but failed. When I'm in the printers option in my settings, I tried clicking on the button "+" to add my printer, but have been unable to get it to connect. It is completely wireless and I can not get the printer to appear in any screen. When I got to my printer a few months ago, my computer basically put it all for me. No cables needed. I desperately need help my printer because I am a graduate student and need to print almost every day. Any help would be wonderful I've exhausted all possible ideas I have.

  Thank you!

  Hello @kkall,

  Welcome to the Forums of HP Support!
  
  I would like to help you today with the addition of your wireless HP ENVY 4500 e-all-in-one printer on your computer Mac OS X 10.10. I understand that everything has started when you accidentally reset your printer settings. Therefore, I will start by ensuring that your printer is always connected wireless. Once we determine if the printer is on the network and 'talk' wireless with your Mac, you should be able to (+) add your printer back in. Please follow the steps below.

  Step 1: Check of connectivity:

  1. On your printer, down arrow until see you Wireless
  2. Select OK in the wireless
  3. Select Wireless details and click OK
  4. Make a note of the IP address that appears
  5. On your Mac, open your internet browser
  6. In the address bar type the IP (omit for www.)
  7. Search this site
  • Opens a Web site for your printer: If means that your printer and your computer "speak" wireless. Please proceed to step 4 below.
  • If a Web site for your printer does not open: This means that your printer and your computer communicate wirelessly. This would result in your Mac not to 'see' the printer (+) Add again. In addition, If none displays IP address on the printer, which means that the printer is is more connected to your wireless network. Please follow the steps below.

  Step 2: Run the Setup wireless Assistant:

  1. On the front panel of your printer, down arrow for the Wireless option
  2. Click OK
  3. Select the wireless configuration wizard , and then click OK
  4. When you are prompted to choose your network name SSID
  5. Fill in your password (key) wireless. It is case sensitive.
  6. Once the wireless is connected successfully, check the IP address of the printer
  7. Now, on your Mac take the IP address and enter it in the address bar of your internet browser
  8. Search this site
  • If the Web site for your printer opens: The printer and the computer are now 'talk' wireless. Please proceed to step 4 below.
  • If the Web site for your printer does not open: The printer and the computer are not 'talk' wireless. Please proceed to the next step.

  Step 3: Powercycle network:

  1. Start by unplugging the power cable to your router
  2. Once your router is unplugged, turn your printer off
  3. Then, shut down your computer
  4. After 30 seconds to 1 minute, reconnect your router back in
  5. Then, turn on your printer
  6. Turn on the computer

  After a few minutes the internet connection will be back. On your computer to access a few sites test Web to verify that the internet is running correctly. Once the internet works again check again the IP address of your printer. Try to open the site on your Mac printers again using the printers IP address.

  Once you are able to open to the site of printers successfully, proceed to the next step.

  Step 4: Add your printer:

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan

  3. click on the plus sign , click Add a printer or a Scanner, click the name of your printer

  4. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the driver HP Envy is.

  

  5. click Add to add the printer to the list.

  -Source

  Now that your printer is added, please try printing again.

  Please reply to this message with the result of your troubleshooting. Good luck!

• !!! BEWARE OF A SCREEN BLUE (WHEN YOU START YOUR SYSTEM) WITH A LONG QUESTION. WE HAVE ONLY 10 SECONDS TO RESPOND AND REACT TO THE! Somebody has hacked my system / do I have a virus?

  Hi all

  Basically, several months ago I noticed something strange on my computer - I know that I should have acted immediately - my Task Manager has been "disabled by Administrator [my]". Yet, I am the administrator!

  Secondly, I lit my system yesterday and was immediately welcomed with a pale blue screen with lots of white, writing, that says, ' we recommend strongly you do not press "ENTER"...? If you do and you want to move before the expiry of the period...? " However, in time, that I tried to browse what was in front of me (that I was unable to catch everything), a 10 sec period had expired and many more white/numbers/text symbols suddenly started flowing to the bottom of my screen (for 15-20 seconds-from left to right)! In addition, my turn makes an unusual noise - as serious an alert! Immediately after, my system loaded up as usual!

  So, I opened the Start Menu (after I restarted my computer to activate the Safe Mode) and the arrow keys has / not working -I can't navigate upwards or downwards to select one of the options! Yet, they have worked perfectly any other time since - just not in Start Menu! Then, I scanned with Windows Defender and nothing has found summer - my "system is safe."

  Third, since then, I've noticed that my system (Windows XP) ran much more slowly too - informed the script is busy, plug-ins are insensitive, etc. - and the/things are / dragged across the screen! Therefore, I searched the forum and help guide to Firefox for everything that seemed similar and came across an instance of another person things 'slide' with a slow system, who suspects a virus! So, I followed the advice given to them - reset Firefox and download a "10 days free Microsoft Virus Scanner" (recorded under msert.exe); He set off to search for more than 9 hours, which found nothing/no infected files!

  Finally, for all that, I can not use system restore or reset Firefox! I never pressed ENTER when the message appeared - do you think I should be?

  I know that my version of Windows has expired and I plan to update very soon, but do not want to lose all the vital files. So, I am currently the backup copies.

  All this activity may be connected? Or would it be different things are happening? And also, please could someone perhaps shed light on what happened or if they can help somehow? I would be VERY grateful.

  Thank you very much

  Bruce.

  Since we have not heard from you lately, I will go ahead and tell you how to fix your problem disabled Task Manager (and probably a few other things):

  Basically, when you see these errors, the usual advice is something in the sense of "something has been disabled in the group policy...". ", and it is probably true that something has been disabled, but you know what something is and what it takes to do about it.

  If you are using XP Home Edition, you will get away with advice to use the Group Policy Editor because there is no Group Policy Editor in XP Home and that advice really doesn't tell you where to look in group policy, even if you run the Group Policy Editor (unless it's really good advice).

  Basically, you need a complete solution that works for all versions of XP and requires no hunting around in the Group Policy Editor or registry to find where things are that may have been disabled.

  Unless you have disabled these things on purpose, chances are good that your system has a malware infection.  The malware knows what tools you use to try to find and remove (like Task Manager), the malware disables the things you tend to use and prevents them from running if you can't find the malware and remove it.

  If your system has this kind of affliction, all malicious software tools you currently use or have used failed to protect your system so that you can expand your horizons malware detection and prevention to prevent these kinds of afflictions in the first place.

  The malware will be happy you trick into thinking that you need to so something drastic to fix your system - as a facility repair, system restore point or a total reinstallation of XP.  This is what it would be like you, but these measures are not necessary.

  You must solve the immediate problem of the tools does not, then scan your system for malware when you are finished.

  No matter what kind of malware you've used analytical tools, they are unlikely to solve this problem, because they cannot tell if the changes made to your system have been on purpose (you or an administrator who makes them) or some malware changed them, so the analysis tools will let these things alone (it's usually a good thing).

  If your system is afflicted in this way, there are probably other things that also do not work - like the registry editor, System Restore and the command prompt, so fix them all at once even if you have not discovered they are broken again.

  These commands from registry removes the registry entries that are stop opening programs.  Although the registry entries do not exist, these commands are safe to run and will work for all versions of XP.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  You can also manually create a system restore point before you make these adjustments.

  Open Notepad (and only Notepad) to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines in BOLD text into the new Notepad file:

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableRegistryTools" = -.
  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]
  "DisableCMD" = -.
  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]
  "DisableTaskMgr" = -.
  [HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
  "DisableCAD" = DWORD: 00000000
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableConfig" = -.
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableSR" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoSetTaskbar" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoControlPanel" = -.

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  enableit.reg

  After you save the file, close Notepad.

  Locate the file enableit.reg on your desktop and double-click it.

  Alternatively, you can right-click on the enableit.reg file, choose merge or open with... and select the registry editor or import.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test to make sure the changes 'stick '.

  You can delete the enableit.reg file when you are finished.

  If the registry editor has also been disabled, you will see a message like this:

  Registry editing has been disabled by your administrator.

  We must therefore first difficulty (not a problem).

  Click Start, run, and in the type box (or just copy / paste the entire order in the window run more safe) the following text:

  reg delete HKCU/v DisableRegistryTools/f

  Then see if regedit behaves (of course it will be).

• Satellite Pro L10 series - keyboard has a missing key

  Hello

  I want to sell my laptop but the keyboard is equipped with a missing key.
  The key is second at top right, between Del and Pause/break.

  I don't know which key it is and ask someone out there who can own a laptop Toshiba Satellite L10 to answer this ad with the identity of the key in question so that I can include in the description of the pc when I put for sale on ebay.

  Thanks in advance.

  Hello

  I assume you are using a common key keyboard in 84/85.

  The button that is placed between the END/pause buttons and LEDS is marked as * INS *.

  This button allows for example the Overtype feature in Microsoft Office Word.

  Hope this might help a little.

  Welcome them

• Printer series 4100 has stopped working Windows 7

  Original title: problem 4100series with windows 7

  When I switched to windows 7, my printer no longer works.  Printing test page very slowly (20 min) and nothing else at all.  Tried the original installation CD, new device driver, etc.  Any ideas?

  Have you tried that?
  HP Print doctor for help with many printing problems

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c02073861&JumpID=ex_r4155/HHO/IPG/ccdoc/trailhead_doc&lang=en