Use the Gigabit Interface as an interface of Interior with guarantee of 100

Similar Questions

• Aironet 1240AG - cannot use the web interface

  I'm trying to set up a new Aironet 1240AG. After that she won an IP from the DHCP in my LAN, I can always connect using the web interface. I use an Internet Explorer 6.0 on Win 2000. It keeps telling me cannot find the server. Please I need help

  Hi Olivier,.

  First off you're welcome :) This method really works without the need for a WLC, be patient. Check the address static IP put you on your TFTP (* range 10.0.0.2 to 10.0.0.30)

  Rename the access point image file in the folder of the server TFTP c1200-k9w7 - tar.default for a series of 1200 access point

  Looks like a problem TFTP (no firewall on your PC?)

  Take a look at the details in the following threads that each has to do with TFTP. There are some great tips to troubleshoot TFTP some of my NetPros favorite ScottMac, Cisco's Stephen and Jack Young. The likely culprit may be you need to uncheck "Hide extensions for known file types" on your server TFTP;

  http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=WLAN%20Radio%20Standards&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc042b/8#selected_message

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=Wireless%20-%20Mobility&topic=General&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc03c4/2#selected_message

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=Wireless%20-%20Mobility&topic=General&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddbf271

  I hope this helps! Good luck!

  Rob

  Remember messages useful rate...

• Anyone who has a problem with the system crashes when importing using the new interface to import

  Anyone who has a problem with the system crashes when importing using the new interface to import

  Can specify you what Adobe program you use so that we do that your post is in the right forum?

• In Camera Raw 8.4.1 I can open the DNG for 3 years, but it's using the old interface and features not the current - how can I change this. Rebuilt the cache.

  Creative cloud running on a HP with 18 GB of Ram - I'm working on a project using DNG 3 years old and when I open in my current Camera Raw, it uses the old interface with 'contrast' down and "valorisation" below 'exposure' - How do Camera Raw to open with the current interface?

  Thanks for any help.

  Craig

  If you are referring to the version of process , you who set the ACR camera Calibration tab.

  

  Also remember that all images with previous settings will show the process used when they were stopped.  Which can also be changed in this tab.

• check box use the temporary Interface as a derived Table

  Hello
  in some guides and oracle websits, they want to check the box use the temporary Interface as a derived Table (Sub-Select).
  but the topology and datastor KM or target, I can't click on it...
  is - anyone know why? what setting I need to change?
  
  reason
  I want to create a temporary interface to use as a source.
  MySQL-> temp. interface-> join oracle of temp table. interface.
  
  Thank you..
  Michael

  Hi michael,.

  When you create a temporary interface, an interface in which the target data store does not exist, you can then use this temporary interface as a source in a different interface. Once you add the temp as a source interface on the mapping tab, select the temporary interface. You should see the check box in the Properties window of the Source to 'Use the temporary Interface as a Derived Table (Sub-Select)'. To use the code integrated into the interface of temp, check this box. The code will then be added as a subselect for this interface.

  See this post for more details: http://www.rittmanmead.com/2011/06/odi-11g-new-mapping-and-interface-features-part-1/

  Enjoy!
  Michael R.

• Is it possible to add a hard drive to a VM running via a script or a program without using the user interface

  I'll try to ask this question clearly, but I ask that read you it carefully, because I can't do a great job of setting out clearly what I'm looking for.

  I know how to create a virtual disk in a batch file or a script.  I know how to have a running virtual machine to detect a newly added hard drive and format it in Linux, BACK, and NetWare. I do not have scripted this part, but I did it manually by adding records via the UI and then by doing the steps manually to make the operating system to detect and format the newly added drive. In each case, these steps are scriptable with the exception of the addition of the drive in the user interface.

  The only way I know to add a new hard disk to a virtual computer running is through the user interface. I don't know in a way that can contain script (for example vmrun or an API call) to make.

  I guess that maybe I can have the virtual machine to go into sleep mode and then add the HDD in the vmx file while the machine is in standby mode, then put the computer to sleep mode, although I have not tested this.

  My question is, ' can a virtual drive be added to a virtual machine running without using the user interface and without put the machine to sleep, or in other words in a script any?

  Have you tried VI SDK?

• Loading multiple files using the same interface in ODI

  Hi all
  
  We load multiple files using the same interface and get the error "java.sql.SQLException: ORA-00942: table or view does not exist" while inserting record in the staging table. It looks like the same temporary table is used when loading multiple files and the error. Grateful if someone offers a solution to avoid this error.
  We use the following KMS:
  
  (1) LKM SQL file
  (2) IKM Oracle SQL COMMAND append.
  
  Receive a quick response.
  
  Thank you
  RP

  Hello

  See this http://odiexperts.com/interface-parallel-execution-a-new-solution

  Thank you
  Fati

• Can I use the Wireless Comfort Desktop 5000 keyboard and receiver with a Mobile 4000 mouse?

  Hi, as the title says: can I use the Wireless Comfort Desktop 5000 keyboard and receiver with a Mobile 4000 mouse? I have the kit, but the mouse is to bulky for me and I would use a mouse Microsoft Mobile 4000 but with the same receiver as the keyboard of the kit, is it possible? Thank you

  Hello

  looks at it's not going to work. Wireless products are programmed to be used with a specific key, so they won't work on another dongle.

  B Eddie

• Can I use the same printer to print from a pc with windows 10 and a pc with windows 7

  * O.t. - printer using windows 7 and 10

  Can I use the same printer to print from a pc with windows 10 and a pc with windows 7?

  Yes, assuming that there is the compatible drivers for both versions of the OS.

• You can directly download the CC applications and authenticate with my adobe cloud identification information without using the desktop application? whenever I have try with the desktop app it says impossible to arrive on the same adobe servers when I'm c

  Hello

  You can directly download the CC applications and authenticate with my adobe cloud identification information without using the desktop application? whenever I have try with the desktop app it says impossible to arrive on the same adobe servers when I'm connected to the Internet and I don't have any active anti-virus software?

  Thank you

  No application of cc, no clouds. It's the simple truth here. Programs cannot operate without him, since he controls the installation and licensing. the rest, we do not know, since you have not provided any useful technical information. Start by reading this (yet?):

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  What also good technical details are necessary.

  Mylenium

• Using the same interface CAN read and write

  Hello.

  Can I use the same CAN interface to read and write?

  For example:

  I send you CAN frame using CAN1 to my MCU.

  IF MCU confirmed the order of receiver it immediately sends the echo return command and there different ID to send the command.

  I tried to use CAN1 output framework and then reconfigures CAN1 to frame in queue and retrieve the frame of the echo.

  But it seems that I was always missing. The 'framework of CAN' kept vi expire.

  When I used the separator on the outlet BOX in my configured MCU CAN1 for frame and CAN2 for chassis in and I managed to catch the echo framework.

  I think about 100 ms for the frame in response that will be sent after the order has been received. It takes longer for the NI PXI-8513 reconfigure? Can I still do it, or I have to use the separator?

  I wad jump to use an interface to read and write.

  Thank you

  Ok. I misread your notion of echo. I understand now. I'm sorry.  The code you posted seems reasonable.

  (1) did you notice on or off for the session?

  (2) what baud rate? You can add a parameter of baud rates for the property to be explicit node.

  (3) I don't remember the name of VI, but you can add a status of Comm Get after reading. This will give you some information about the bus - if errors were detected, etc. Which can be useful to help debug.

• Changes in the driver vi using the Simulation Interface Toolkit (SIT) for PXI get do not appear.

  Hello

  I use Simulation Interface Toolkit to target a controller built in Simulink on a PXI target. I used the SIT connection manager to generate the driver screws I had to make some changes in the screw driver specifically Read.vi IO. I made the changes and the entire application runs without error. But the changes are not getting in the functioning of the application, essentially when I load the thing on PXI and run it, it contains exactly as it was before behaiving I made these changes. Some how the changes I make to the Read.vi of e/s are not begin day somewhere in the top vi driver.

  Could someone help me with this please.

  Eliane.

  Hi Justin_P,

  Thank you very much for the reply. Solved the problem. What you're saying, that's certainly true, but I do not use the project.

  The problem was that whenever it makes a change one driver that saw VI top-level driver must be opened and saved again. This opening and registration links the pilot with new changed correctly VI and then everything works fine.

  Thanks again.

  Eliane.

• Using the Tunnel interface on router

  Hello world

  I see hew Tunnel interface on the router.

  Router is running OSPF.

  However, there is no cryptographic statements.

  tunnel configuration

  Tunnel1 interface

  10.4.x.x from IP x.x.x.x

  time 7

  source of tunnel Loopback1

  destination 10.4.x.x tunnel

  My question is when we use the interface Tunnel without any cryptographic statements?

  Thank you

  MAhesh

  This Tunnel is a plain GRE Tunnel. They are generally used without crypto when:

  (1) traffic is not sent through an untrusted network and cryptographic protection is not necessary.
  (2) the GRE traffic gets encrypted on a separate device if the end point free WILL is not able to do the necessary cryptographic protection.

  Sent by Cisco Support technique iPad App

• How to add new resource to existing routes using the API / Interface Tables?

  Hi friends,
  
  I need to add new resources to our existing ranges. The number of records is more than 10,000. So I need to create an anonymous block for her. But I don't know what are the tables Interface / API to use for their insertion. If anyone can guide me how can this be achieved, I would really appreciate it. If you can provide me with an example of code for it, it would be the best.
  
  Thanks in advance.
  
  KM

  Hi KM.

  PL insert the line in the BOM_OP_RESOURCES_INTERFACE table with

  INSERT INTO BOM_OP_RESOURCES_INTERFACE
  (process_flag, transaction_type, organization_id, routing_sequence_id, operation_seq_num, resource_seq_num,
  resource_code, assigned_units, usage_rate_or_amount, basis_type, schedule_flag, creation_date, effectivity_date)
  VALUES
  (1, 'CREATE', organization_id, v_rout_seq_id, v_operation_seq_num, v_resource_seq_num, v_resource_code,
  v_assigned_units, v_usage_rate_or_amount, DECODE (v_basis_type, 'BATCH', 2, 'ITEM', 1),
  Decode(i.schedule_yes_no, 'YES', 1, 'NO', 2), sysdate, v_eff_dt);

  Where, v_eff_dt = SELECT operation_sequence_id, effectivity_date IN v_oper_seq_id, v_eff_dt
  OF bom_operation_sequences b
  WHERE b.routing_sequence_id = v_rout_seq_id
  AND b.operation_seq_num = v_operation_seq_num;

  Then run simultaneous 'Bill and routing Interface' to import resources into the existing ranges.

  HTH
  Sanjay

• How to associate the data store of the target for the newly created using the API Interface

  How to create a new Interface under project, need to associate the data store target for mappings for the interface by using APIs "."
  
  Able to get the associated interface created temporary data store. You need to associate a new database model. How to do this using the API
  
  My code is,
  
  String pCode = "DEVELOPMENT";
  Context OdiContext = (mgr.getFinder (OdiContext.class)) .findByCode (pCode) (IOdiContextFinder);
  System.out.println (Context.getLastDate ());
  
  OdiInterface pInterface = new OdiInterface ("toDeleted_Interface", pFolder, context);
  pFolder.addInterface (pInterface);
  
  The list of ds < DataSet > = pInterface.getDataSets ();
  < DataSet > iterator itr = ds.iterator ();
  DataSet ds_nxt = itr.next ();
  
  PAlias string = "HRA_TMPL_DEFNS_TL";
  pOrder int = 0;
  OdiModel pModel = (mgr.getFinder (OdiModel.class)) .findByCode ("FILE_PM_MODEL") (IOdiModelFinder);
  String pName = "HRA_TMPL_DEFNS_TL";
  OdiDataStore pUnderlyingOdiDataStore = new OdiDataStore (pModel, pName);
  SourceDataStore pSourceDataStore = new SourceDataStore (ds_nxt, false, pAlias, pOrder, pUnderlyingOdiDataStore);
  ds_nxt.addSourceDataStore (pSourceDataStore);
  
  TargetDataStore tdata = pInterface.getTargetDataStore ();
  
  If (tdata.isTemporaryDataStore ())
  {
  }

  http://odiexperts.com/creating-interface-for-single-source-and-target/
  http://odiexperts.com/creating-temporary-interface-using-ODI-SDK/