Use the Testsoftware, connection problems

Similar Questions

• Vista, a pppoe connection is created by using the 'Get Connected wizard' or rasphone.exe, she appears as a "Dial-up connection" in the network connections folder.

  Vista, a pppoe connection is created by using the 'Get Connected wizard' or rasphone.exe, she appears as a "Dial-up connection" in the network connections folder. When you right click on the connection of customer created, click Properties, it says "connect using the Modem.

  Is it a registry problem or what? How can I fix?

  original title: PPPOE connection problem

  Hello

  1. you connect using a cable or DSL modem?

  2. did you ever get this working before that?

  3. are you connected to a domain?

  4 are you running Vista in a virtual environment?

  You doing appeared in this link to create the PPPOE connection:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-PPPoE-connection-to-the-Internet

  Thank you

• Remote assistance - unable to connect to the desktop computer using the remote connection

  Hello

  I'm currently running vista Professional 64 bits for portable and desktop computers.

  Problem:
  -I am not able to connect to the desktop computer by using the remote connection.

  Tried:
  -Setup the remote asstance for the Username (account login) designated
  -looked up the IP address
  -entering the IP then username and password
  Failed connection *.

  Little Question, too:
  -I run behind a router with 3 machines connected to the router, it would change my location from IP address? I think that's where I'm stuck at.

  The following article should you guide through the process and solve your problems:http://www.vistax64.com/tutorials/116361-remote-assistance.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to use the default connection type?

  Hi all

  Someone knows how can I make my app use the internet connection which has been set for the browser?

  For example, if the browser has been configured to use the WiFi, use it instead of GPRS, EDGE or 3 G. Otherwise, if WiFi is not available, it allows the best data connection?

  According to BlackBerry, there are 5 connections to choose.

  I found good article solved my problem

  http://blog.accelgolf.com/2009/05/22/BlackBerry-cross-carrier-and-cross-network-HTTP-connection

  I used the code in this article and the work demands right now

  Thanks a lot for all

• How to get the gif file hosted by using the Http connection?

  Hello

  I have an application that downloads animation gif from a server by using the http connection. Here is the code I use to download the image.

  try {
  
              httpConnection = (HttpConnection) Connector.open(url, Connector.READ_WRITE);            httpConnection.setRequestMethod(HttpConnection.GET);
  
              if (httpConnection.getResponseCode() == HttpConnection.HTTP_OK) {                DataInputStream dS = httpConnection.openDataInputStream();
  
                  byte[] data = new byte[dS.available()];                dS.read(data);
  
                  gifImage = (GIFEncodedImage) EncodedImage.createEncodedImage(data, 0,data.length);
  
              } else {                throw new Exception("ResponseCode:" + httpConnection.getResponseCode());            }        } catch (Exception e) {                        gifImage = null;            e.printStackTrace();        }
  

  the problem with this code is, when the gif file is 1175 bytes above, it does not load the gif.

  example:-If the gif on the server is 1500 bytes, this code retrieves only 1175 bytes.

  I think that the rest of the bytes are sent in a different package. But how to get them.

  can someone please provide a code for buffering the inputstream?

  any help is appreciated.

  Dieye

  Hmm, nobody seems to know how to do, it seems. Here's how I did it.

              httpConnection = (HttpConnection) Connector.open(url, Connector.READ_WRITE);
              httpConnection.setRequestMethod(HttpConnection.GET);
  
              int responseCode = httpConnection.getResponseCode();
              if (responseCode == HttpConnection.HTTP_OK) {
                  inputStream = httpConnection.openInputStream();
                  ByteArrayOutputStream byteArrayOutputStream = new ByteArrayOutputStream();
  
                  byte[] buffer = new byte[256];
                  int len = 0, imageSize = 0;
  
                  while (-1 != (len = inputStream.read(buffer))) {
                      byteArrayOutputStream.write(buffer);
                      imageSize += len;
                  }
  
                  byteArrayOutputStream.flush();
                  byte[] imageData = byteArrayOutputStream.toByteArray();
                  byteArrayOutputStream.close();
  
                  gifImage = (GIFEncodedImage) EncodedImage.createEncodedImage(imageData, 0, imageSize);
  

• Is there a file management utility availabe for transfer files from Iphone to PC using the USB connection or wifi? Thank you

  Is there a file management utility availabe for transfer (image) files from Iphone to PC using the USB connection or wifi? Thank you

  You should be able to synchronize with a compatible Picture Manager, but you can also see the TouchCopy application.

• Can I use my printer manually instead of using the wireless connection?

  Can I use my printer manually instead of using the wireless connection?

  cbg_37 wrote:
  

  It is an OfficeJet Pro 8610.

  Hello

  It has a print USB 2.0 port, so you can use the printer USB cable to connect it to your computer. This cable may be not in the box, please check if you first buy one (around $5 to $ 10). It is similar to:

  

  Kind regards.

• Why do you want my piece of sound through my TV sony vaio when I use the HDMI connection

  original title: sound through my tv speakers
  Why do you want my piece of sound through my TV sony vaio when I use the HDMI connection

  Hello

  What version of OS are you using?

  Check if the sound configuration is set to HDMI

  1. click on start, click on Control Panel

  2. click on the Audio tab, select read. Now, check if you have selected Digital Audio (HDMI).

• You can use the same connection to mobile broadband on your laptop & a smart phone?

  You can use the same connection to mobile broadband on your laptop & a smart phone?  IE, exchange between one & the other not use both at the same time?

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking

  It will be useful.

• When I try to send and receive e-mail using Windows Mail, it wants to use a made up connection. How can I use the wireless connection?

  Windpws Mail & Wi - Fi

  I just installed a TalkTalk wireless router which seems to have installed correctly. However when I try to send and receive e-mail using Windows Mail, she wants to use a made up connection. How can I use the wireless connection? Thank you very much, Dianthus MJ.

  Go to tools | Accounts | Mail | Properties | Connection and check or change the connection properties.  You will need to remove the account and then add it again, but try first and also check tools | Options | Connections.

  Steve

• Problem of test Signal before using the TCP connection

  Right now my application uses a SocketConnection TCP to communicate with a remote server.  It works fine, but I'm trying to make sure that my program can correctly handle the situation to move to an area with no coverage.

  When I run my application, if I uncheck the box "on the cover" for GSM and CDMA under Network properties, my app fine until it calls the OutputStreamWriter.write () function to send something on the socket connection.  I have it in a try/catch block, but it just seems to hang instead of throwing an exception.

  How can I check the signal before attempting to send data on the SocketConnection?

  To facilitate clear life upwards, here's the order of what happens:

  1 application starts on the cover.

  2 SocketConnection made successfully.

  3 OutputStreamWriter successfully SocketConnection.

  4. coverage is lost

  5 OutputStreamWriter.write () is called, but freezes instead of throwing an exception.

  The socket connection output stream write operations do not throw an exception when there is no coverage is the correct behavior. That's because on cellular networks the IP tunnel to the carrier (and therefore the TCP connections on this tunnel) survives loss of coverage. For example, if your application opens a connection TCP from a BlackBerry, then the BlackBerry loses coverage, then take cover, say, 1 minute later, the TCP connection opened by your application will continue works fine, unless intermediate network component or your server closes the connection due to inactivity.

• Satellite P300-133 - how to use the internet connection via BlueTooth

  Hello

  I finally solve my problem with the synchronization via bluetooth between my P300-133 and my [HTC | http://www.htc.com/europe/product.aspx?id=15674] with Windows Mobile 5 - with step by step instructions of Toshiba.

  But I don't know how to use the Internet via BT, I tried many ways, one of them was to create a PAN with P300 as server - correctly connected HTC to P300, but it seams I can share internet with P300 as a gateway. And I want to do the opposite - get internet from my mobile to the computer (while she is away from all the cables). I'm not sure this PAN in the right way...

  The question of the other and less important is to be able to share that connection with your laptop via bluetooth - I guess that this must be done through Pan

  Thanks for any help.

  Bartek

  You found a solution to this?

• Reading large data using the database connectivity

  Hello

  I use the Labview database connectivity toolkit to connect to my database sqlitev3 (I'm using ODBC). I just have to connect to the database (using the block of open_connection) and read all the values inside (using the select_data block). The problem is that my database is huge (about 2 GB), and I get this error:

  . VI NI_Database_API.lvlib:Rec FETCH Recordset Data (R)-> NI_Database_API.lvlibB Tools Select Data.vi-> real_web.vi-> real_web.vi.ProxyCallerADO error: 0x8007000E Exception occurred in provider: not enough memory is available to complete this operation. in .vi NI_Database_API.lvlib:Rec Fetch Recordset Data (R)-> NI_Database_API.lvlibB Tools Select Data.vi-> real_web.vi-> real_web.vi.ProxyCaller

  What should I do? It seems that he reads the data in the memory and it doesn't have enough space for it. When I read the data I want to write to a file.

  

  Read it in pieces. Write each piece to the file, and then repeat with the next segment. Try to read and process all data in one shot is not very practical and you found out will not work.

• I keep losing my internet connection and then my windows firewall was disabled when I reconnect. It doesn't to everyone at home who also use the same connection. Help, please

  I have a wireless router at home and everyone using it without any problems... except me! I continue to get purged from the connection and then I have to turn my windows firewall whenever I have reconnect. It can be very annoying, especially if I'm in the middle of a transaction. Any ideas please?

  Hello

  (1) do you have made no changes before this problem?

  (2) you receive an error message?

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  "Network connection is intermittent (periodically disconnects).

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  If you are able to connect to network after having turned off the windows firewall, and then add an exception in the windows firewall.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-a-port-in-Windows-Firewall

  Additional reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-is-my-Internet-connection-so-slow#section_2

  I hope this helps.

• "The network adapter is not correctly configured to use the ip Protocol" problem on Vista

  Hello. My PC has recently came across this problem "the network adapter is not correctly configured to use the ip Protocol", every time I click on diagnose & repair. I don't know how to fix it. Please help, thanks in advance. Magic

  Hello X-x_MaGiC_x-X,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try the rest of the stage in this article:

  System restore points are created automatically when the following occur:

  • When you install a new application or driver.
  • When you uninstall or install some programs.
  • When you install new updates
  • Automatically on a daily interval
  • Manually by creating a.
  • If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.

  So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.

  Restore Windows Vista to a previous state

  In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.

  If you can connect to Windows Vista, you must follow these steps.

  1. Close and save any documents that you have opened.
  2. Click the Start button to open your Start Menu. The Start button looks like this:
  3. When the Start Menu open click on the menu option all programs.
  4. Click once on the Start Menu Accessories group.
  5. Click once on the System Tools Start Menu group.
  6. Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.

  You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.

  1 screen of system restore

  By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.

  2. the list of available restore points

  You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.

  3. confirm the selected restore point

  If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.

  4. second Confirmation

  If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.

  5. restoration of a restore point

  When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.

  6. system restore was successful

  If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.

  7 undo the last system restore

  Your computer should now work correctly again.

  With the help of the restoration of the system in the Windows recovery environment

  Manual creation of Restore Points

  As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and I would save the State in case of problems in the future. To create a manual restore point, you must follow these steps:

  1. Click the Start button to open your Start Menu. The Start button looks like this:
  2. Click on the control panel menu option.
  3. Click the option menu system and Maintenance.
  4. Click on the system menu option.
  5. Click on the System Protection in the list on the left.

  You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.

  8. the System Protection tab

  To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.

  9. Enter the manual restore point title

  Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.

  10. Manual restore point has been created

  Now that you have finished doing the manual restore point, you can close the system window.

  Try to download the correct and up-to-date drivers.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.