used but D drive missing

Similar Questions

• Personal settings don't are not loading. by default the generic profile so the programs can be used, but data is missing. What should I do?

  Laptop computer startup after detached work and returned to the House, I got the message "personal settings don't is not loading" and he went to a generic profile by default similar to what you see when you turn on a new computer for the first time.  I use Windows XP Professional on a Dell Latitude d

  All programs are intact, but all files are absent, including Quickbooks data.  We use Carbonite backup so food won't be a problem; How to bring back the personal settings?

  Thanks for your help!

  It is an easy one.  You probably have a corrupt user profile.  One of the following solutions, you should get back working again...

  "Windows XP problems if your profile is corrupted"
    <>http://support.Microsoft.com/kb/326688 >

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  ""Windows cannot load your profile because it may be corrupted"error message when you try to log on Windows XP.
    <>http://support.Microsoft.com/kb/318011 >

  Note also that corrupt user profiles are usually accompanied or caused by the corruption of system files.  After recovery, it would be prudent to run a complete control of the disk (chkdsk) with the /F or /R option to repair corrupt sectors.

  "How to perform the disk error checking in Windows XP"
    <>http://support.Microsoft.com/kb/315265 >

  Note that this can take hours and cannot be interrupted, then perform it when you won't need your machine for awhile.

  HTH,
  JW

• I have a mac 2009 i (late), I want again to install snow leopard (I have the disc), but my driver disk is broken! So I want to ask if there is a way to create a disk image of my windows pc to use it through the hard drive of my imac Lord?

  I have a mac 2009 i (late), I want again to install snow leopard (I have the disc), but my driver disk is broken! So I want to ask if there is a way to create a disk image of my windows pc to use it through the hard drive of my imac Lord?

  External DVD USB drives are cheap. Usually $20 for a good quality player. Just buy one of these at Best Buy or another store and use it to install Snow Leopard. Then you also have a drive for something else that you have on the disk.

• I try to use a USB 2.0 port 20 adapter SATA/IDE to clone my hard drive but the drive iI'm try clone has been partitioned as a GPT protected partition. Any can help me?

  I try to use a USB 2.0 port 20 adapter SATA/IDE to clone my hard drive but the drive iI'm try clone has been partitioned as a GPT protected partition. Any can help me?

  I don't think that you can do in XP. I think that you need x 64 XP, Vista x 64 win7 x 64 or windows server x 64. As it says here

  The only thing you can do in XP's format

• I would use the external drive to download my photos, documents, etc. but do not know how to proceed.

  I just got my old crash (desk top) computer. I knew it would, so I transferred all my information on an external hard drive. I bought a dell 2020 with windows 8, only bought a few days ago. I would use the external drive to download my photos, documents, etc. but do not know how to proceed.  My old computer won't start at all, that's why I got the external drive. Could someone please help me with this task. Thank you.

  Original title: confused

  You can simply plug it in, connect the external hard drive, make sure it is turned on.

  Then copy and paste on your files.

  In Windows 8, start File Explorer

  

  Highlight all the files and folders

  Click on copy on the Ribbon (Home tab)

  Then then paste into their respective folders

  Press Windows key + R

  Type: %UserProfile%

  Press enter

• 5901tw flow 8: [Please help] unable to connect to 4G network card, driver missing HUAWEI Mobile Broadband Module

  Hi all

  I just bought 8 streams HP 5901tw 4 days ago, yesterday, after internet connection using my card of 4G (WWAN driver) in my Tablet 8 Stream, suddenly the internet connection dropped and I lost my 4 G network card. I don't know why it happens by itself. But for connection Wifi still works well and wifi interface is always detected in network adapter but 4G is missing from the list.

  In Device Manager I see list of pilot missing in other devices-> HUAWEI Broadband Driver Module is missing from my Windows with Bing 32 bit OS 8.1. I try to find the driver through windows update, website of hp or other sources, but is not found. I also tried to update the BIOS firmware to the latest version and upgrade of such software firmware driver LAN, etc. from the HP Web site, but still can not fix missing pilot of the HUAWEI Module of high speed.

  I also try reboot several times, making recovery, but still having lack of driver for HUAWEI ADSL Module.

  Last effort, I try to current level Windows 8.1 to Windows 10, but still no conclusion success lack driver HUAWEI or fixing my 4G network missing question.

  Now I can still connect to the internet with my 4 G card more every trip.

  Someone there solution and how is address/where to download those missing 4 G network driver (HUAWEI ADSL Module) 8.1 for Windows or Windows 10 HP 5901tw 8 streaming?

  Really appreciate for any help and answer including HP support.

  It's really annoying to have this problem and get stuck without a solution. I just enjoy this new Tablet HP for 2 days and now unable to connect to the 4G network more.

  Thank you.

  Kind regards

  Wachyu

  I finally found the problem with the HUAWEI ADSL Module in my stream 8 HP (after 2 days of sleep trying to install and uninstall the driver and try all options).

  It seems maybe some Windows Update or a driver is trying to change the firmware inside the card top debit MOBILE HUAWEI to download mode (VID:12 d 1 PID:1568), so it can't use any driver installed in point 8.1 of Windows.

  I tried to manually change the download mode inside the HUAWEI tools firmware: Revskills (B. Kerler credit) return to the standard mode and then reset, then the Device Manager will detect again under the new material in NIC as HUAWEI Mobile Broadband Module (VID:12 d 1 PID:1570) and automatically installed its driver from Microsoft.

  VOILLAA, My Mobile Broadband can now be re-used to connect to Internet and now also presented in the connection.

  A lot of delicate here to force Windows using HUAWEI driver to use the COM Port to communicate with the card mobile broadband HUAWEI inside and then using Revskills tools to change the mode to return to standard mode.

  If someone knows this problem and wants my help, just ping me and I'll be happy to help you in the orientation.

• Pavillion 500-102ix Desktop Ralink RT 3290 Bluetooth driver missing

  Last month my bluetooth adapter no longer works so I uninstalled it it and tried to reinstall it. I downloaded the driver from the HP website but the driver manager says missing Ralink RT 3290 Bluetooth.

  Kindly help.

  Hello:

  If you run W8.1 use this driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130262-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0011

  If you run W7/W8, use this driver...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_130390_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Cannot install windows 7-error: dvd/cd driver missing

  Try to install Windows 7 on a different SSD, but get an error indicating that the missing required cd/dvd driver.  How Windows load into memory from a cd/dvd that windows 7 says there is no driver missing?  This is the same installation disc that I used on a previous SSD without problem.  I have 2 other unused installation floppies, and each returns the error message.  This problem arose when an attempt to use System Restore Image I had done just on an external SSD and a drive hard usb.  The error I had to try to use one of them was that the Image was made in EFI and the computer seeks to restore in BIOS. It's the same machine.  Yes, disk management displays the UEFI 100 MB system partition.  The motherboard is an Asus F2A85 - V Pro.  List Disk running installation diisk sees only the cd/dvd and the drive hard usb but not the SATA drives.  When you normally use that List Disk sees everything.  The UEFI bios sees all readers, when you use the system installation disk.  I used a system repair disc made from the same computer at the same time as the picture of the system and used to start and got a system repair options is not compatible with this version of windows.  The windows version is 6.1.7601 sp 1 build 7601.  Any ideas?

  Hello

  Thank you for your response.

  There are two modes of starting particularly machine-> BIOS & EFI. BIOS is the general start mechanism found in most machines. Some of the machines also support EFI boot mechanism with BIOS

  Either the BIOS or EFI is set as the default in your machine - Please check start the installation system which

  one is active by default.

  If the EFI operating system is installed, it will create an EFI system partition in your machine. Installation of BIOS has no EFI partition.

  Warning in the BIOS: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful. Please feel free to post in the case where you are facing other problems with Windows, we will be happy to help you.

• GX620 XPpro DVD/CD drive missing

  Hello people, I'm puzzled.

  GX620 XP pro

  recently installed nero 8 trial then the system has crashed a few times everything by using it to burn a data DVD. I removed Nero and the drive is now missing.

  Does not appear in the BIOS, not in the Device Manager, not in my computer.

  Have you tried microsoft knowledge base attempt to correct via the removal of the upper and lower entrances register (not sure what the technical reference number at this point) it did not work. This link: http://support.microsoft.com/kb/314060/en-us

  Have tried all sorts of diagnostics, no luck

  Tried to delete the entries for the IDE controllers in Device Manager, rebooted, XP found the primary and secondary and installed IDE controllers and jut like quickley the second IDE controller - DISAPPEARED.

  I used Nero removal tools and removed apparently it... but the reader is always finished.

  Here's the weird thing, I grabbed another disc from a similar PC, thinking Ok, the drive must be bad (although I figured that, but willing to try anything!), and it did not work. Swapped cables too, think okay, maybe the cable is bad. No luck. "But the drive in the other system after swapping (remember, the other system was fine) and now the drive does not work in the other 'good' system '. Coincidence? Virus? How a virus could write the EPROM of the dvd player?

  Okay, back to my system to try to understand the original problem. Thinking I'll deal with the other later. (hoping, wishing)

  I have re-installed windows XP pro. and again, no luck. The only thing I think I've let it go is a low-level format and reformatting of the MBR. But it seems that using a chainsaw for something a butterknife should do.

  Can anyone help?

  
  

• the size of your hard drive is not supported for this process. Please use a hard drive at least GB in size

  Whenever I try to use my restore disks of backup with the image of the system when I bought my Dell 8300 desktop computer I get this error message (your hard drive is not taken in charge for this process. Please use a hard drive at least GB in size.

  My computer crashed went to blue screen that wouldn't everything now I hear 4 beeps, finally I managed to do start on. I already ran the long diagnoses everything was fine.

  Here's my problem. I changed the Sata AHCI RAID mode I could create a partition then my Windows 7 downloaded CD Windows 7... my CD of drivers dell drivers, but now I'm unable to use my system restore CD to restore like I always do when I have a problem. When I changed the sata mode to AHIC on load it says (lack of operating system)

  I'm not very technical, so if someone can show me step by step on what I should do or give me a call [Admin Note: personal information removed] I would appreciate it a lot. I've added a few pictures as well

  

  

  Large. I am pleased that my DBAN guide has helped you.

  Now that you are on the factory settings, I advise Dell DataSafe Local Backup uninstall and upgrade to the latest version of Dell backup and restoration which has many bugs/improvements, including the ability to restore to another hard drive which is useful in case the hard disk fails in the future or you decide to upgrade later to an SSD. The XPS 8300 running perfectly with a SSD, I have mine put in place with one. Then you can create a Rescue Disk (external hard drive Bootable) or Backup factory (Bootable USB Flash Drive) that will be promoted the recovery compared to the facts media with Dell DataSafe Local Backup. See here for more details:

  http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery/

  Note This is not a UEFI BIOS (he missed just out on the passage to the UEFI) but may start from an external hard drive.

• Can I use a USB drive to external200GB as the HD for virtual Windows using Bootcamp

  Having only very limited need for any Windows function, I now do not need to use a CAD program only Windows. I tried VMware Fusion. It works, BUT everything is very slow, just browsing, so I'm sure resource intensive CAD software will be unacceptable. Where the interest in Bootcamp. Preferring to leave my primary HD intact, I would use a Reader USB 200 GB extra as the "windows partition" as this should allow everything to work more effectively.

  Windows on the external storage is legal and authorized under the of Enterprise Windows Windows-to-go. Consider a small C: Windows on the internal drive (40 GB) and use the external drive as D:.

• Satellite A30 - ACPI driver missing

  Hello
  I have an old A30 that I just installed Win7 on. Everything is fine apart from a missing driver - unknown device ACPI

  In Device manager the hardware ID is ACPI\CMP0101

  Now this laptop fan lights not bad and she has a random problem to close without reason. I checked the fans and they are clear. In my view, that stops can be connected to this driver missing because it can control the temp/fans that stop it overheating, and then I could be wrong...

  I would appreciate any help and advice

  Thanks in advance

  mcdodd

  Hello

  Are you sure that you want to use Windows 7 on this computer laptop oldie? In my opinion, you should be happy with a preinstalled OS to Toshiba. There are all the drivers and tools pre-installed and you don t have the stress with the driver installation. You can have fun with your laptop :)

  As you can see in another thread, you must reinstall Windows to solve this problem:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=126340

• Can Tecra M1 - I use my DVD drive in an external enclosure?

  Hello

  I had one laptop Terca M1. Now, I have another PC Toshiba laptop which Bay is not compatible with the M1. So I can't use my 'old' on this new laptop dvd player.
  Is there an available accessory Slim external enclosure to use my dvd drive external usb?

  Thank you

  HP

  Hello!

  Which is a good question, but as far as I know that it doesn't have these adapters.
  But you can look on eBay or ask your computer dealer for this.

  And I agree with Akuma. I think the best solution would be an external USB DVD drive.

  Good bye

• Satellite P300-135 system issues using two HARD drives

  About a month ago I bought a faster hard drive for my laptop (because it wasn't hard drive 5400 RPM by default), and computer technicians to the store where I bought my laptop has recommended a Seagate Momentus 7200.4 250410.

  The first couple of days everything went smooth, but after that, every second, restart my OS (Windows 7 Ultimate 32 bit) reports of problems with my video card, sometimes 'Windows cannot initialize the device of this hardware driver. (Code 37) ", the other time"Windows has stopped this device because it has reported problems. " (Code 43) ", and when this error occurs, the keyboard and the keyboard do not work too.
  I made a simple and primitive diagnosis by deleting the second hard drive and rebooted 5 or 6 times, and everything went very well.

  So I think the problem is that the laptop has not enough power for two hard disks. Is it true, or is my phone begins to fail?

  Sorry for my mistakes of language, but English is my second language.

  Hello

  Usually the second HDD should not affect the performance of the system, but it of impossible
  So maybe you should test the specifications and performance of OS using another HARD drive maybe a HARD disk that takes in charge of 5400 RPM

• Satellite U300-14 b: can I use the graphics driver for the Intel page?

  My Satellite U300-14 b (VIsta 32 bit Home Premium, 2 GB) has a 'Mobile GM945 Express Chipset Intel'. Download from Toshiba site, says I've got the latest driver, namely 7.14.10.1263 dated 04/25/07.

  The Intel site lists their latest driver such as in date 7.14.10.1364 dated 11/12/07.

  I want to try the latest version of the driver to help solve a problem of occasional crash / restart when Vista wakes from sleep. I am told that the graphics drivers are often to blame and should therefore be updated.

  Can I safely updated with version 11/12/07, or I risk of problems? Not sure if Toshiba are just slow to release the updated driver, or if there is a better reason that they did not?

  Well, usually you can use the graphic driver directly from Intel page but I found several threads here in the forum that said that the chart non-Toshiba drivers can be installed and used only at your own risk

  > want to try the latest version of the driver to help solve a problem of occasional crash / restart when Vista wakes from sleep
  Hmm perhaps this problem could be related to the graphics driver, but I recommend you to update to Vista and install all THE patches for Vista.

  Best regards