user account permissions need fixing

Similar Questions

• Firefox 14.01: Java Plugin appear on behalf of administrator only, not for user accounts - how to fix?

  I wasn't using the java plugin for a long time.

  At some point in the past, the plugin java (that I had turned off for years) is COMPLETELY DISAPPEARED from the list of plugins and addons Manager list NORMAL user accounts.

  It is ALWAYS AVAILABLE on the ADMIN account, but is seriously not intended to be run from there.

  Sysinternals sysmon, is to observe that the java runtime registry entries are located since firefox running in user mode. The java runtime (not the absolute last version, but enough to day 1.7.0_01) is correctly installed and running (for any local application of the IDE).

  The questions:
  -How can I fix this situation?
  -How Firefox does not recognize the java runtime (in detail)?
  -How can I avoid this problem for future updates?

  Additional info:

  Protocol of activities of firefox in admin mode to access the java plug-in:
  http://harryboeck.dyndns.org/Verschiedenes/Firefox-Java-troubleshooting-superusermode.PNG

  Protocol of activities of firefox in user mode access the java plug-in:
  http://harryboeck.dyndns.org/Verschiedenes/Firefox-Java-troubleshooting-usermode.PNG

  Notice the difference: in administrator mode, after accessing HKLM/.../JRE, it goes directly to open 'npdeployJava1.dll '. In user mode, it makes mystical headstands in vain to access some mime base, but does not even touch the dll at all. Should this have any meaning?

  You must first update the Java plugin. Older versions have been blocked since Firefox due to a serious security problem, so update should help. Let me know if you still have problems (make sure that you uninstall any previous version)

• How to take the permissions of the user account for my external backup hard drive, incase of my computer crashed?

  Original title: backup of user account permissions?

  Hello

  I put permissions to my external hard drive so that it is accessible only by my account. For everyone, access is denied. I want to save permissions, in case my computer breaks down. How can I do this?

  I have only set permissions, not encrypted the files on the disk.

  Hello

  I will certainly help the question of fixing.

  Taking backup of permissions is not possible from your computer to an external hard drive. However, you can set a password for your external hard drive, so that you can access it from any computer that has administrative privileges by entering the password.

  For reference:

  Overview of BitLocker Drive encryption

  http://Windows.Microsoft.com/is-is/Windows-Vista/BitLocker-Drive-encryption-overview

  I hope that the information above helps you.

• On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "Please help

  On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "This message appears for firefox, AVG, Windows live messenger, windows MediaPlayer etc.

  I can access my documents, Panel etc. and everything is there, but it won't let me not get access to the programs.

  Also when I go to click on itunes and open office it happens "this file has no program associated with it for performing this action. Create an association in the set associations Control Panel.

  Given that I was able to access control panel, I was able to create a new user and use it for now to send this message and all programs have worked on it and I was able to check for the presence of viruses on the Avg on this and everything was clear.

  Could you please explain whats wrong and tell me how to fix this please: D thanks

  Hello
   
  1. don't you make changes before the show?
  2. is the computer is joined to the domain controller?
   
  You can not start any application on a client computer that is joined to the domain controller. When you try to start this type of application, you receive an error message similar to the following:
  "Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  This can also occur if the user account is damaged. If the computer is not connected to a domain controller, try the following steps.
  1. connect to another user account and create a new user account to fix the damaged user account.
  For more information about creating a new user account and the fixing corrupt user account, visit this link: http://windows.microsoft.com/en-US/windows-vista/Fix-a-corrupted-user-profile
   
  Previous post the results in more detail, so that we can help you further.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• How to combine two user accounts

  I created a user account on my new MBP (os x 10.11.3) before using the migration assistant to transfer the data from my old MBP.

  Now I have 2 user accounts I need to merge into one

  Any advice for how to fix the welcome.

  THX & br - gerhard

  lookie here

  Combine two + accounts on the same machine

• User account control appears when the is not necessary.

  The user account control appears everytime I open Windows Live Mail. How can I stop this, but retain control of active user account when needed on the other actions of the computer?   Thank you

  Hi JosephDoherty,

  UAC (User Account Control) notifies you when changes will be made to your computer that require administrator-level permissions.

  You can try to change UAC settings and see if it helps.

  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

  Important: Turn on UAC after you complete the steps.

  For more information, you can consult the following articles:

  How can I change the behavior of user account control by using the slider?

  What is user account control?

  Enable or disable the User Account Control

  Hope this information is useful.

• How can I access/use the files/folders located in another user account?

  I got a new pc that I used the easy transfer of files to transfer everything over XP to Windows 7, but there are records in the user account I need to be able to use the user account administrator, how to transfer these files via? or do I need to set permissions or privileges to be able to see them? or can I remove this particular user account and keep files and folders on this subject? Can someone please help

  Moved from feedback

  Original title: PERMISSIONS/PRIVILEGES of USER ACCOUNT

  When you log on as an administrator account, then you are allowed to access any folder and open or move any file.

• I deleted several accounts of users, but after that I have restart the laptop all user accounts have been restored?

  I deleted several user accounts and need to restart to changesw can take effect, but after that I have to restart the laptop then all user accounts have been restored?

  Hi GhettoBoy,

  How do you delete user accounts? Is it just C:\Dosument and settings users or accounts under the control panel? If you don't want to keep all these account data, you can try to delete the profile of click Start-> settings-> Control Panel-> system-> Advanced-> user profile and select the profile and remove. Also check under 'User accounts' in the control panel to remove the names of users.

  I hope this helps.

• delete a user account on Pavilion 20 all-in-one

  My husband and I are the only people who use this computer and have created two user accounts and need only to have a.

  Need to know how to remove one of the users. I can see where he has the opportunity to add a user in the settings of pc and change a picture, but nothing about the deletion/removal of one of the user accounts.

  Help, please.

  Thank you!

  Hello:

  Please visit the link below to know how to delete a user account in windows 7.

  Read the section on to the PC in a working group.

  http://Windows.Microsoft.com/en-us/Windows7/delete-a-user-account

  If you are under Windows 8, there is a slightly different procedure that you can watch in the video on the link below.

  http://www.avoiderrors.NET/delete-user-accounts-in-Windows-8/

• 2 user accounts on a single machine

  I have 2 users on a single machine, which count as 1 license? I have an Imac with 2 user accounts, both using PS elements. I will delete a user account, the need to activate it? Or is the license for the machine and the counts as one?

  The licenses are by machine, not by the user once activated, the program will be avialable to all users.

  Mylenium

• Receipt of user account control appears that need permissions to run "hprbupdate.exe.

  original title: user account control

  I use a hp pavillion slimline pc with pre-installed vista home premium. Every now and again the user account control appears that need permissions to run hprbupdate.exe.0CA9EAA1_22E0_4F04_BFEE_7C3E208317AD. I have no idea what it is, but I can confirm it anyway. I used several analyzers of viruses and rootkits and my system is clean up. I use Super anti-spyware, Malwarebytes, Spybot S & D, TDSSKiller and GMER, and I have mse installed for my anti-virus. I do not know why this happens, sometimes, I am away from my computer and later in the day the user account control asking for my permission. I just checked the edits and there is not a moment of windows update or HP update. Any help would be appreciated. Thank you.

  Hello

  1 did you changes to the computer before the show?

  2. have you logged on to the computer as an administrator?

  3. using an HP printer or HP computer?

  The hprbUpdate.exe file is part of the HP software product Wizard.

  Follow the steps in the link below and check if that helps.

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&cc=us&DocName=c00857352&DLC=en

• I have a user account, but the type is standard user... I can't create an administrator user... because when I press on it see something that says that WINDOWS needs YOUR permission TO CONTINUE to create... Fix this please...

  I have a user account, but the type is standard user... I can't create an administrator user... because when I press on it see something that says that WINDOWS needs YOUR permission TO CONTINUE to create... Fix this please...

  To create an administrator account, you must be...
  (1.) an administrator
  (2.) to connect to the existing administrator account, or in possession of an administrator password.
  If you do not have all of the above, forget it.

  When the system asked you for permission, you should click on continue or enter the Admin password. If you could not do either, it means that you don't have administrative rights to do what you want.

  t-4-2

• Need permissions in Win 7 to take possession of the corrupt administrator (user) account

  I have a corrupt administrator user account that is only available in safe mode, at the command prompt.  I created another user account that gives me the Windows interface and I'm now trying to "own the administrator account to copy my files to my new user account."

  I am not able to access or change anything from anywhere or management; (Registry, other user accounts, other folders or files, properties or fields etc.) due to the restrictions on my PC.  I tried to use the takeown.exe tool, but I'm not sure what should be entered in the command line.  I read on the parameters to TO, but do not seem to get any results.

  Your advice is appreciated... Thank you!

  Since you were using the command prompt window when you created the new user, I just assumed you have made using the command:

  NET user newuser * / add

  where 'newuser' is the name of the new user?

  Did you also give this privilege to administrator newuser entering control:

  net localgroup administrators newuser / add

  While logged as administrator?

  It would be necessary to perform the actions that you are trying to do.

  HTH,

  JW

• "Receive the error message" Microsoft (R) HTML Application host has encountered a problem and needs to close, etc. "when you access user accounts

  Original title: I can't access the accounts of users (XP).

  I can not access (XP) user accounts.  I get the message: "Microsoft (R) HTML Application host has encountered a problem and needs to close etc.."  The APPname is mshta.exe. I have this msg when I click on anything in the user accounts.

  1. What is the problem?
  2. what should I do to fix this?

  Hello Eric_984,

  Thank you for the question!

  It is disheartening to know that have problems you with user accounts. "As I understand it, you get an error message" Microsoft (R) HTML Application host has encountered a problem and needs to close etc. "when you access user accounts.

  I need to ask you a question to help you best.

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the link and check.

  Error message when you try to open the item user accounts in Control Panel on a Windows XP-based computer: "Microsoft HTML Application host has encountered a problem and needs to close."

  Answer to us if you are having problems with user accounts or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Need to change the name of the administrator under the folder of the user account

  I just got a new HP laptop with Windows Vista 64 SP1. My friend who got the laptop I use a nickname that I hate it when he set up the computer for which it was not supposed to do in the first place. I went to the section control panel user accounts control and changed the name of the administrator account. I have only the administrator account on my computer with the guest account. That part worked.

  My problem is that, under C:/Users / (username), it still shows that hated nickname. I want to change the name of this folder, but cannot understand how or if it's possible. Can anyone help? Thanks in advance

  As you have discovered, you cannot change a user account by simply changing the name. That will be a change cosmetic only and none of the files/folders real profile will be changed. Follow the instructions below to fix things to your liking and to implement correctly under Vista user accounts.

  1. create the new user account (named as desired) as a * standard * (not administrator) account and at least one additional account with administrative privileges. Call the extra account 'CompAdmin', 'Tech' or similar.

  2. Enter the new user account once if the profile files are created, and then disconnect and then connect to CompAdmin.

  3. go in Control Panel > system > advanced > user profile > settings

  4. you will see where you can copy user accounts. Copy the misnamed old account to the new name correctly there. Use her browse to select your new account (C:\Users\newaccount). If you don't want to copy all the settings, and then instead simply navigate using the old user, music Explorer Windows Documents, etc. and copy the data to the new user folders.

  5. connect to your new correctly named user account. When you are sure to have what you need, you can delete the misnamed control panel user account > accounts to users if you wish.

  General information about configuring users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is an OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. If your normal user account is an administrator, having created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!