User Guide and import

Similar Questions

• Satellite C850 - Office has only users guide and trash

  Hello.

  Problems with my Satellite C850 - 02D00m. broken the screen and using an external monitor. Now a few minutes after the robbery he on it blocks the normal desktop with only a guide and an icon that recycle bin shows. Before crashing, I tried to do a restore system without success and of course cannot locate the recovery discs I did when it was new.

  Despite trying I can't open the guide of the user using mouse pad or keys.

  Any ideas? Please, I beg you!

  Hello

  Check it please http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm
  You will find instructions on the repair and recovery of Windows 8.

  Try running HDD recovery image installation and portable test with the factory settings.
  Please post comments.

• The user guide and the Support Page at launch?

  Depending on how you define a product launch (or how many different "spear" in how many different places) it's time to make the section and support pages available user guide?

  Our site now is here.

• Where the written user guides and blogs in OTN?

  Hello
  
  I'm new on OTN.
  
  I would like to know if the RTO has any user written documents and Articles?
  
  If yes where can I find them?
  
  
  Thank you
  
  Arun

  Not surewehat you mean ("user writes"), but maybe you are looking for https://blogs.oracle.com/

• How to obtain user guide and the use of the ExpressCard Mobile HP Media Center remote control

  My HP Pavilion dv7-1448dx-product # NV213UA #ABA, my product has a tuner inside card? I'm running Win 7 Ultimate x 64
  I searched HP and found 1 photo of my card ExpressCard Mobile HP Media Center remote control, I found all the descriptions of component and everything BUT how to use it?
  Where can I get information on how to use the "card ExpressCard Remote control Mobile HP Media Center"?

  Deborah M souls

  Hello

  Same question that:

  http://h30434.www3.HP.com/T5/forums/replypage/Board-ID/OS/message-ID/171380

  Kind regards.

• First HP: 'User Guide' or ' Phase User Guide 2 "?

  The first link the HP documentation online is

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & LC = on & DLC = in & document = & Product = 5367461

  What is the difference between the 'user's Guide' and the ' User Guide Phase 2 "? Which should I use, or do I have both? If the guide phase 2 is just one update on the other, why list both? I recommend you put useful text on the page of guidance on this. Thank you.

  Phase 2 is a newer, updated version to date.  However, please note that NONE of these are as complete as the Guide provided with the newest premium emulator.  Install the emulator most recent, then click on help / User Guide and you will get a PDF document including the first 616 PDF pages are the same document Phase 2 above, but then it is followed by more than 334 pages called "User Guide supplement" containing brand new information about the last update.  It is the document that you want, not the ones on the page web link above.

  Just in case... Here is a link to the latest emulator ("virtual Calculator"): ftp://ftp.hp.com/pub/calculators/Prime

  Hope that helps!

  DISCLAIMER: I do not work for HP.  I'm a happy user of HP Calculator.

• Cannot download the user guide or the software from the Linksys site.

  I am trying to get the user guide and the firmware on the linksys site and get "file not found".

  In fact, almost all of the links does this!

  Browser is Firefox (last) in a XP box.

  Tried chat (what a joke!) and after 30 minutes they told me that my device was 'out of support' and gave me a link to the site I was already on. After trying this link (just for completeness) and get the same "file not found", they guy says the site does not Ant to try later.

  Tried this morning with exactly the same results.

  Someone has ideas of what's going on here?

  Thank you!

  Harvey in Victoria, Texas.

  Go here - http://www.linksysbycisco.com/APAC/en/support/WAP11/download

  His works now.

• Where is the iPhone app user guide? Deleted by mistake of the iPhone 5 and well as always on the iPhone 6 is not in the App Store

  Where is the iPhone app user guide? Deleted by mistake of the iPhone 5 and well as always on the iPhone 6 is not in the App Store

  Hello

  You will find Guides for the use of the Apple in the iBooks (inside the iBooks app) store, not in the App Store.

  James

• Fix a corrupted user profile - Outlook Import and addresses of mail folders.

  OS: Windows Vista editions Home Premium x 64.  When I try to log on I get the error msg "the user profile service has no logon.  User profile cannot be loaded. "In addition, if I try to go forward and asked a password I am informed that the password has failed.  I tried a system restore, but did not correct the user profile.  Finally, I used the procedures in the posted in Forum Vista to create a new user profile and copy files (music, pictures, Favorites, excel & Word docs, etc) in the new user profile.  Also, I used the Outlook Wizard to connect to my e-mail address with the server of my Internet service provider.

  Question: How do I copy/import my Outlook 2007 e-mail folders and addresses from my old to my new user profile user profile?

  Thank you very much for the help.

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
  two with the same password) use to test or difficulty of the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  ==============================================

  For the problem of Outlook, please check with the experts of the Office and Outlook here: (re - ask your question in)
  These groups). Basically you use Outlook - file - IMPORT and that it points to the Outlook.pst file on
  the old profile.

  Discussions of Questions General Outlook
  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

  MS Office discussion groups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
  And here:

  Microsoft.public.Outlook discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Outlook&cat=en_us_81f401b3-b3fe-4e8d-B291-066f30b63ec8&lang=en&CR=us

  Office newsgroups
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to export a user instance data and import it into another instance of a directly without storing the physical file.

  Dear all,

  I need your help I need to export data from user a (1 instance) and import it on another an instance without storage on location.

  I used to do as an export of data about the physical location and then import into another instance where I stored the dump file on physical location.

  Now I don't want to follow these method (standard method), is there any way possible means kindly share with me. Thank you very much in advance.

  Dear VA Napoleon,

  Thank you for your immediate response. If it's possible means gives the example script.

• I don't have the people and the Media tabs to allow me to import pictures from my iPhotos, I don't have the elive, quick, guided, and expert tabs, can anyone help please?

  Hello

  Im having problems with my iPhotos import, I just bought photoshop elements 13 and mac book at the same time and I'm a bit of a learning curve, I noticed that on all the tutorials, there were people and Media tabs which I don't see, all I see is elive, Quick, guided and Expert, can anyone please help?

  Thanks in advance

  Nicol

  Elements consists of two separate but closely linked programs: the editor, where you work on your photos, and the Organizer, allowing you to organize them. You are looking in the editor. The Organizer, click the Organizer button in the start screen or at the bottom of the editor.

  Now, you want to keep your photos in iphoto or organizer? It's a choice you need to do, sooner or later. The Organizer includes an EEG of photos by > command iphoto, but who's going to copy all the photos in your iphoto library to a new location and organizing data bases do for copies. Is that what you want to do, or want to you use iphoto to organize your photos, in which case you would not use the PSE Organizer?

• Tables of export and import the schema using the system user

  Hello
  
  Can someone asssit me please:
  
  I want to export all the tables / or some tables of a schema (ETLUSER) on DB1 to ETLUSER on an other (DB2) database by using the user of the SYSTEM. The SYSTEM user has DBA privilege.
  How I do what I do not know the password of ETLUSER.
  
  Environment:
  Oracle 11 g 2, AIX5
  
  Thank you.

  no problem, shouldn't you password in the ETLUSER.
  Start your exp or imp of the user of the system

  below, scott table dept exported and imported in the HR schema.

  Oracle@oragg1 > exp tables = scott.dept file = a.dmp log = b.log

  Export: Release 10.2.0.4.0 - Production on Mon Mar 19 18:58:45 2012

  Copyright (c) 1982, 2007, Oracle. All rights reserved.

  Username: System
  Password:

  Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production 64-bit
  With the partitioning, Real Application Clusters, OLAP, data mining
  and Real Application Testing options
  Export in US7ASCII and AL16UTF16 NCHAR character set
  Server uses WE8ISO8859P1 (possible character set conversion) character set

  About to export specified tables by conventional means...
  Current user has changed to SCOTT
  . . export the DEPT 10 exported table rows

  Oracle@oragg1 > imp leader = a.dmp log = bb.log fromuser = scott touser = hr

  Import: Release 10.2.0.4.0 - Production on Mon Mar 19 18:58:56 2012

  Copyright (c) 1982, 2007, Oracle. All rights reserved.

  Username: System
  Password:

  Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production 64-bit
  With the partitioning, Real Application Clusters, OLAP, data mining
  and Real Application Testing options

  Export file created by EXPORT: V10.02.01 by conventional means
  import in US7ASCII and AL16UTF16 NCHAR character set
  import server uses WE8ISO8859P1 (possible character set conversion) character set
  *. import of SCOTT in HR objects *. .
  "DEPT" table import 10 lines imported
  Import completed successfully without warnings.

• Difference between the implementation guide and the user guide.

  Hi all
  
  I'm a fresh graduate, I wanted to just know what is the difference between the implementation guide and the user guide.
  
  Sorry, the question may seem simple, but I'm not aware of the merry.
  
  Kind regards

  Hello

  The implementation guide is the reference that you can use to make functional configuration so that the user guide covers how the module/application navigation and tells you how to use it.

  Thank you
  Hussein

• Why is there no 'user guide' for Thunderbird?

  I understand perfectly that the mode of Organization for Mozilla software is quite different from that of commercial software, so please, don't think not that I expect Mozilla behave like, say, Microsoft (I thought). That said, it is even more regrettable that there is not consistent, well-ordered guide, organized topically for Thunderbird so that the user is not required to address each issue, as it can occur in ad-hoc mode.

  You would think that now, many volunteers who answer questions here could easily set up a user guide for Thunderbird (and Firefox) as well, besides which could gather all the documents scattered in one wonderful unit. Naturally, such a user guide was no, answer questions, but it could certainly flag and help with those involving the use of basic and intermediate.

  For example, in preparing to send e-mails, I couldn't understand how to fill "To", "Cc" and "Bcc" fields in several recipients of messages without a laborious process which seemed unnecessary. There was no clear direction on the side great menu that appears on the 'Write' mode simply by pressing F9. Finally, not whereby this be intelligent that I did it, I managed to fall on the information about this. The vexations that i have experienced in become accustomed to Thunderbird, this has been the most important. But he and all the rest would have been easily successful if ordered and consistent guidelines were available in the user guide.

  Thank you.

  1. maybe I'm wrong but I don't see you said where you started to look for the information you think is missing? URL alias

  2. you ask a "tutorial"?
  -There are many examples on the web
  - https://support.mozilla.org/en-US/products/thunderbird from there to 'Learn the basics' aka https://support.mozilla.org/en-US/products/thunderbird/learn-basics-get-started

  3 or you are looking for a manual? as https://www.flossmanuals.net/thunderbird/

• History of the vector graphic bike in Photoshop 5.0LE pdf on CD User Guide

  Hello. I recently bought a new copy of Photoshop 5.0LE and saw that she had a pdf of the User Guide on the CD-ROM. I have been fascinated by the graphic vector image of a bike on page 24 of the pdf User Guide.  When I opened this page in Illustrator and looked at the information in the file-> advanced-> properties of the PDF, it read that the creator of the pdf User Guide was someone by the name of "nhirooka" in 1998 and that it has been created in FrameMaker 5.5, that I recently bought and learn.

  The only thing I have still yet to understand is how the graphics of the bicycle was created? It was in an older version of Illustrator? One thing that is interesting about the picture is, it is tinged with several created manually linear and radial gradients (i.e. concentric vector or border-touch rectangles, circles each filled with a slightly different shade of gray). Now it's a lot of work that went into creating this vector image!

  There are differences in features between the bike on the page raster image and the image of bicycle vector (for example, no crutch in vector image, lacing of the rays is totally different). Do you think that the image of the bicycle was created by tracing high resolution photo (s) of the bicycle? Or were the measurements in directly bicycle parts and then did something like Autocad first before importing into Illustrator for coloring/shading? I'm puzzled.

  In addition, I can't figure out how to get the vector image of bicycle in FrameMaker 5.5 without some kind of distortion. Maybe I need the right older version of Illustrator for this? Exactly what versions of Illustrator 5.5 FrameMaker accept vector images directly (i.e. drag / move)? I have CS3 and FM5.5 does NOT accept images of her.

  How the vector image of bicycle was created and then inserted into a document of FrameMaker5.5? Is what I want to know. Does anyone know the history of this?

  Regarding the placement of the vectors from illustrator, when you save as or eps, the option dialog box has a drop down menu to choose an older version of got it or eps, that should work.

  I've never used FrameMaker, but some old page layout programs would display a tiff in the screen image but pass the EPS to the printer. That's why you have the possibility to integrate a tiff image in an eps file.