user_source and all_source does not contain some of the code

Similar Questions

• One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

  Original title: USB device not recognized

  Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

  Hello

  (1) is the specific question of specific USB devices?
  (2) did you of recent changes to the computer before the show?
  (3) have you tried plugging the USB stick on another computer?

  (4) what is the brand and model of the computer?

  I suggest to refer to the following methods and check if it helps to solve the problem.

  Method 1: Hardware devices do not work or are not detected in Windows

  Run Microsoft Fixit mentioned in the article.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: USB Port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

  Reference:--

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

• Hello, I have a problem and cannot complete the installation of the creative cloud, signature of the photographer, has been convfirmado and I can not download some applications, the latest CLOUDS INSTALLATION GIVES ERROR 201, I DO NOT KNOW HOW to RES

  Hello, I have a problem and cannot complete the installation of the creative cloud, signature of the photographer, has been convfirmado and I can not download some applications, the latest CLOUDS INSTALLATION GIVES ERROR 201, I DO NOT KNOW HOW to SOLVE IT MORE.

  Error 201 & 205 & 206 & 207 or several U43 errors

  -https://helpx.adobe.com/creative-cloud/kb/download-update-errors.html

• Why the serial number does not appear after typing the code out of the card I bought?

  Why the serial number does not appear after typing the code out of the card I bought?

  See the following topics:

  Using redemption code

  --------------------

  http://helpx.Adobe.com/x-productkb/global/redemption-code-help.html

• CTRL and alt does not when you select the picture to join

  I'm not very techno and hope someone can help me find an answer... when trying to select multiple photos to attach to the e-mail, I used to use the CTRL and ALT keys to select several photos.  This does not work for me now.  Are there settings that I can change to get this working again?

  ALT? Are you sure? CTRL + click (for the selection of random photos)
  or shift-click (to select an entire group) works for me.

• I have Firefox 7.0.1 but Google says he's older and it does not load some features. I tried to download Aurora and the same thing...

  It was working fine (a gmail, gmail calendar and blogspot running) and all of a sudden all the canvases of gmail no longer works properly and I got the message saying that my browser is too old and some features were no longer available.

  Your Agent user is really messed up - reset it.
  
  http://KB.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

• Slideshow button previous and next does not work, someone has the same problem?

  When I put more than two slide shows on stage, the button previous and next stop work.

  Hi Bernard! Finally, I solved the problem. I put borders (area) in the upper layer than the layers of the slide show. =/

  

  Now, works great. Thank you very much for the help!

  Home

• BlackBerry Smartphones Blackberry ID password reset email does not contain a link to reset the password!

  I'm having the same issue that this guy had in this forum (which appears not to be a solution?): http://supportforums.blackberry.com/t5/BlackBerry-PlayBook/Blackberry-ID-Password-Reset/m-p/1745415#...

  Basically, I'm trying to reset my password for my Blackberry Curve Blackberry. I receive a password reset email when I ask, but the email does not contain a link to reset my password. ALL of the email is the following:

  "This email has been automatically generated. Please do not respond to this e-mail.

  If you have not previously indicated that you wish to receive emails from Research In Motion Limited or its affiliates about exclusive offers and updates on BlackBerry products and services and you want to do, please click here.

  Research In Motion Limited, 295 Phillip Street, Waterloo, Ontario, Canada, N2L 3W8

  © 2012 research In Motion Limited. All rights reserved. BlackBerry®, RIM®, Research In Motion® and other trademarks, names and logos are the property of Research In Motion Limited and are registered or used in the United States and the countries of the world. »

  Does anyone know what is the problem? It is not my web browser which distort the enamel - I tried to retrieve the email from Firefox, Google Chrome and Internet Explorer.

  It is very strange indeed... with only 2 causes possible I think.

  (1) your e-mail (on your PC) application blocking the link provided in the email... a lot of apps email will do that and sometimes you have to replace them. If you have another interface to use (for example, webmail interface, GMail and Outlook), then try the other and see if that helps. According to the messaging environment (for example, private corporate e-mail system), it is also possible that some bridge along the trail is stripping on the necessary link for safety.

  (2) the installation of e-mail to reset is actually broken, and enamel does not contain what it is supposed to. If this is the case, then it requires a formal attention to the RIM. The only way to achieve this is for you to contact the Association and to degenerate the RIM of your case.

  Good luck!

• Alarm and timer does not iOS 6 s 10

  Help! After having downloaded the iOS 10, my alarms and timer does not work. During the years that I have had 4 different alarms set - 2 in the morning and 2 the afternoon. This morning the alarm at the top of my phone icon was there, so I assumed that everything was settled as it is normally. I was wrong. My 05:30 alarm has not extinguished the next morning. The next day, I could turn it back on, but when I went to all other lights it shuts down another. It would only be standing. So, I opted for the alarm from 05:30 again. With my phone not allowing an alarm to be defined at the time, now I'm going to put it but it randomly turns off its own. I'm FED UP with it! I used my phone as alarm clock years but had to go out and by a real wake-up call to make sure I wake up in the morning. Not only that, but my timer does not work either. What is someone is having these problems?

  I did have the problem where one turn the other goes out, but since I got my iPhone with iOS 10 7 or my alarm not timers turn off. I watched the ticks to zero with no sound, no matter what I do. There is no problem with volume control and I did it with the key "secret" on and outside. I am at a total loss.

• Error one of the UBS damage connected to this computer has malfunctioned and windows does not recognize it

  Original title: Canon MF 4500 printer inkjet

  My computer tells me that 'one of UBS damage connected to this computer has malfunctioned and windows does not recognize"it could the cable, as the printer (canon MF 4500) does not work.

  Hello

  1. what operating system is installed on your computer?

  2. when exactly you receive this error?

  3. all USB devices work properly on your computer?

  4. have you made changes on the computer before this problem?

  Method 1:

  You can try running the fix - it from the following link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  You can try to uninstall and reinstall the USB controller. Follow the steps.

  (a) click Start and then click Control Panel.

  (b) click System and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (d) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows will automatically reinstall all USB controllers.

  It will be useful.

• adater WLAN and bluetooth does not properly on windows7 32 bit hp 250

  I need driver wireless adater aid, after installing windows7 32 bit on my new laptop HP 250 G1 my wireless network does not yet and infact is not visible in the Device Manager and theblutoothalso does not work correctly. is the network controller hardware id: PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01

  Finally, my BIOS, wlan id is: ppd-qcwb335 on hold using the driver get my wlan and bluetooth back to life!

  Thank you!

  Series of QCA9000 of Qualcomm, Atheros Wireless LAN Driver for Microsoft Windows:

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64676.exe

  To help you with your bluetooth driver, I need your bluetooth hardware ID.

• -HP Mini 110-1025DX closed by itself while downloading the BIOS driver and now does not turn

  I have reintalled windows xp then download, audio driver gave error when downloading and I read on the internet that unless I have download BIOS, she held in error, so I downloaded "WinFlash for HP NetBook system BIOS - Microsoft Windows-Based" and while it was installing I did something else, and when returned, not e book had closed and now does not turn.

  the specifications are also less

  -HP Mini 110-1025DX PC
  Serial number: CNU9316D45
  Product number: VA723UA -.
  Operating system: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.111025 - 1629)
  Language: English (regional setting: English)
  Manufacturer: Hewlett-Packard
  Model: HP Mini 110-1000
  BIOS: KBC Version 02.0 B
  Processor: Intel (r) CPU Atom N270 @ 1.60 GHz (2 CPUs)
  Memory: RAM 1016MB
  Page file: 514MB used, 1927 MB of available space
  Windows Dir: C:\WINDOWS
  DirectX version: DirectX 9 .0c (4.09.0000.0904)
  DX setup parameters: not found
  DxDiag Version: 5.03.2600.5512 32 bit Unicode

  What should I do?        Thank you

  It won't turn? The lights come?

  Let's first, remove the battery and unplug the power adapter and leave without electricity for a minute... then reconnect and see if it is eaten on.

• OfficeJet 6500 intermittently does not print half of the last line in the lower doc

  Using an Officejet 6500 E709a connected to Windows 7 64-bit PC via ethernet LAN.  Intermittently, the printer is unable to print a part of the last line of the document.  A 12 point font for example it does not print the bottom half of the letters on the last line of text.  What software (word, excel, PDF, etc.) and it does not matter hwer on the page of the last line falls.  It occurs only on the last page of multipage documents.

  Try that and see if it helps the question:

  1. In the Windows taskbar, click the Windows icon ( ), type control printers in the Search text box and press ENTER. The Printers window opens.

• I upgraded my Mac and does not contain a disk drive. I have creative suite 5 on my old computer and I want to put it on my new computer. How can I do this?

  I upgraded my Mac and does not contain a disk drive. I have creative cloud 5 on my old computer and I want to put it on my new computer. How can I do this?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  - and also read https://forums.adobe.com/thread/1146459

• I downoladed and tried to install CS6 on my computer after that machine has been upgraded to Windows 10.  I get a message that says "serial number is not for the product." The drop-down list does not contain CS6 Design and Web Premium.  What should I do

  I downloaded and tried to install CS6 on my computer after that machine has been upgraded to Windows 10.  I get a message that says "serial number is not for the product." The drop-down list does not contain CS6 Design and Web Premium.  What should I do to get loaded and enabled on my computer?

  That fall down, and the serial number you provide must identify the previous version that you upgraded because CS6 is an upgraded version in your case.

  Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5

  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html