Users unable to SSH to UCS Manager

Similar Questions

• Integrating Active Directory and UCS Manager

  I'm looking to create an LDAP authentication provider in the UCS Manager that will authenticate users in Active Directory. I see the configuration guide UCS that a schema change is required to add a new attribute for user accounts and the guide details what the new attribute should be. However there are no detailed instructions on how to make the change to AD. I imagine some sort of import LDIFDE is required, but does anyone have more detailed steps on how to do it?

  Thank you

  You can ssh in your UCS, go to the NxOS prompt and test authentication as follows:

  Laurel - A (nxos) # test cpaggen aaa cisco group ldap
  the user has been authenticated
  Laurel - A (nxos) # test aaa group ldap cpaggen cisco1
  user authentication failed
  Laurel - A (nxos) # test aaa group ldap foo doesntexist
  user authentication failed
  Laurel-a. (nxos) #

  Make sure that this part of work. The role assignment comes from CiscoAVPair and the value must be a shell: roles = 'admin' If you want the user to be an administrator. CiscoAVPair must be an attribute of the user object. I've attached a screenshot of Wireshark for a successful authentication and authorization.

  You will also find the definition of the user and configuration of my UCS.

• remote VPN and vpn site to site vpn remote users unable to access the local network

  As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config

  The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.

  ASA Version 8.2 (2)
  !
  host name
  domain kunchevrolet
  activate r8xwsBuKsSP7kABz encrypted password
  r8xwsBuKsSP7kABz encrypted passwd
  names of
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  PPPoE client vpdn group dataone
  IP address pppoe
  !
  interface Ethernet0/1
  nameif inside
  security-level 50
  IP 192.168.215.2 255.255.255.0
  !
  interface Ethernet0/2
  nameif Internet
  security-level 0
  IP address dhcp setroute
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Shutdown
  No nameif
  no level of security
  no ip address
  management only
  !
  passive FTP mode
  clock timezone IST 5 30
  DNS server-group DefaultDNS
  domain kunchevrolet
  permit same-security-traffic intra-interface
  object-group network GM-DC-VPN-Gateway
  object-group, net-LAN
  access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
  192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
  tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  MTU 1500 Internet
  IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
  ICMP unreachable rate-limit 1 burst-size 1
  enable ASDM history
  ARP timeout 14400
  NAT-control
  Global 1 interface (outside)
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  AAA authentication LOCAL telnet console
  AAA authentication http LOCAL console
  AAA authentication enable LOCAL console
  LOCAL AAA authentication serial console
  Enable http server
  x.x.x.x 255.255.255.252 out http
  http 192.168.215.0 255.255.255.252 inside
  http 192.168.215.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Crypto-map dynamic dynmap 65500 transform-set RIGHT
  card crypto 10 VPN ipsec-isakmp dynamic dynmap
  card crypto VPN outside interface
  card crypto 10 ASA-01 set peer 221.135.138.130
  card crypto 10 ASA - 01 the transform-set RIGHT value
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 65535
  preshared authentication
  the Encryption
  sha hash
  Group 2
  lifetime 28800
  Telnet 192.168.215.0 255.255.255.0 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 5
  Console timeout 0
  management-access inside
  VPDN group dataone request dialout pppoe
  VPDN group dataone localname bb4027654187_scdrid
  VPDN group dataone ppp authentication chap
  VPDN username bb4027654187_scdrid password * local store
  interface for identifying DHCP-client Internet customer
  dhcpd dns 218.248.255.141 218.248.245.1
  !
  dhcpd address 192.168.215.11 - 192.168.215.254 inside
  dhcpd allow inside
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  Des-sha1 encryption SSL
  WebVPN
  allow outside
  tunnel-group-list activate
  internal kun group policy
  kun group policy attributes
  VPN - connections 8
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value split tunnel
  kunchevrolet value by default-field
  test P4ttSyrm33SV8TYp encrypted password username
  username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
  username kunauto attributes
  Strategy Group-VPN-kun
  Protocol-tunnel-VPN IPSec
  tunnel-group vpngroup type remote access
  tunnel-group vpngroup General attributes
  address pool VPN_Users
  Group Policy - by default-kun
  tunnel-group vpngroup webvpn-attributes
  the vpngroup group alias activation
  vpngroup group tunnel ipsec-attributes
  pre-shared key *.
  type tunnel-group test remote access
  tunnel-group x.x.x.x type ipsec-l2l
  tunnel-group ipsec-attributes x.x.x.x
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  Review the ip options
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
  : end
  kunauto #.

  Hello

  Looking at the configuration, there is an access list this nat exemption: -.

  192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0

  But it is not applied in the States of nat.

  Send the following command to the nat exemption to apply: -.

  NAT (inside) 0 access-list sheep

  Kind regards

  Dinesh Moudgil

  P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community

• Unable to ssh on alternative port

  Mini Mac OS X Server 10.11.6, CommuniGate Pro, no and almost no other stock OS X Server services.

  The server owner recently found on a network that has blocked ports for VPN and SSH connections, so we try to set up the server to allow a SSH tunnel through SOCKS proxy port 443, which is almost always open. (We have no plans on execution of web services via this port on this area.)

  Research indicates that this should be a two-step process: 1) Edit /Library/Server/Web/Config/Proxy/apache_serviceproxy.conf to remove the web listening on ports 80 and 443 ports; (2) edit/etc/ssh/ssh_config for add a SSH listener on port 443. then restart.

  After that, HTTP services are off on 80 and 443, but I can't connect to SSH on port 443. Works very well over 22 yet. Nmapping the server indicates that there is nothing open on port 443. Is there anything else I need to do for this open?

  A user on the stack Exchange responded to this question. Works a charm.

  http://Apple.StackExchange.com/questions/253332/unable-to-SSH-to-OS-x-server-Ove r-replacement-port

• UCS Manager 2.0 (1W) read only role grayed out

  Hi, I want to create a user authenticated locally in UCS Manager with read-only permissions, but when I go to add the role of read-only user is not available for selection (it is grayed out). No idea how to solve this problem and make the read-only role available for selection? Screenshot attached. Thank you.

  It is activated by default.

  Don't assign it not all roles to your new user and they will automatically get the read-only.

  Kind regards

  Robert

• The UCS Manager LDAP question

  Hi guys,.

  I was wondering if anyone could help with a weird problem that we seem to have met with our UCS Manager.  We set it up to use LDAP authentication for log on which works very well for four of the five members of the team, but we have a user that although it is in exactly the same groups as the rest of us continually gets unautheticated errors to the user.

  We did the habit of checking that it is not his machine or installation and in the newspapers that it even does not save an attempt to log on default so not sure what I can check any thoughts would be much appreciated!

  We use UCSM v2.1 (1e) in case it's relevant?

  Thank you very much

  John

  I ran into the same issue.  Has proved to be a bug in the firmware DN was too long.

  CSCth96721

  It is more a limitation of 128 characters for the number of units of organization or the length of the distinguished name (DN) when you use LDAP to Active Directory authentication.

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/release/notes/UCS_28313.html

• UCS Manager 2.2 - LDAP authentication

  Hello

  I have some general questions about authentication LDAP and UCS Manager.

  I hope it's unterstandable...

  We have the following structure:

  • DC = Company.domain.com
    • OU = Domain Administration
      • OU =Administrators
        • UO = Germany
          • CN = User1-SMA
          • CN = SMA-user2
      • OU = Test-UO
        • CN = ucstestuser
        • CN = ucsadmingroup--> Member = SMA-user1, user2-SMA
          

  I added an LDAP provider

  binduser is the SMA-User1

  Base DN = OU = Domain Administration, DC = company, DC = domain, DC = com

  attribute = empty

  filter = sAMAccountName = $userid

  password for User1 SMA

  group permission / recursive enabled.

  I have not add some attributes or map the group. Now I can connect with ucstestuser (read-only), but not with SMA-user1 user2 SMA oder.

  If I add ucstestuser to ucsadmingroup a map of this group, ucstestuser can access and have right to admin, ADM-user1 and user2-adm cannot access (user authentication failed).

  I don't understand, why ucstestuser can access and other users in a different OU not. Unique database name is domain Administration, so that UCSM should see all three users, not?

  Can anyone help? Thank you.

  / Danny

  With UCS remote authentication when a user connects using a temporary account on the FI as a UCS-MyAuthDomain\myusername, which is limited to a total of 32 characters.  If you shorten the name of domain authentication defined in UCSM domain.com to a shorter name as AD, it will allow for the use of a username any longer.

  Note

  For systems using the remote authentication protocol, the authentication domain name is considered to be part of the user name and the limit of 32 characters for usernames created locally. Because Cisco UCS inserts 5-character formatting, the authentication will fail if the name and the user character domain name combined total is greater than 27.

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/SW/GUI/config/Guide/2-2/b_UCSM_GUI_Configuration_Guide_2_2/b_UCSM_GUI_Configuration_Guide_2_1_chapter_01000.html

• MMIC access after integration of series C with UCS Manager

  My question is on the following terms:

  This guide contains information and procedures for installing Cisco UCS C200, C210 and C250 servers for integration with Cisco UCS Manager version 1.4 or 2.0.1.

  Cisco UCS C-Series-Rack mounting servers are managed by the autonomous integrated software, Cisco (CIMC) integrated management controller. When a series C Rack-Mount Serveris integrated with Cisco UCS Manager, the MMIC manages nor the server. Instead, it is run with the Cisco UCS Manager software. You'll control the server using the Cisco UCS Manager or Cisco UCS Manager CLI user interface.

  This means that you literally can't website to the graphical interface of MMIC?  Or means that, although you can still access the MMIC, the management of the C series is recommended to run through the UCS Manager?

  They are mutually exclusive?

  Thank you

  Amir

  That's right, all the features are moved to Service UCSM profiles and can't do anything of CIMC.

  CIMC will report "managed by UCSM" or something like that.

• UCS Manager - internal backup system failed [WSF: FAILURE]

  Hello

  I have UCS Manager Version 2.2 (1 c)

  I implemented the backup of the configuration via SCP and Im getting error.

  Destination is accessible from other computers in the same VLAN via WinSCP.

  I need help what exactly is causing that error in the UCS Manager and how to solve this problem.

  I tried to delete and add new functioning of the backup operation.

  Severity: critical
  [FWS: FAILURE]: internal system backup
  Type: WSF
  Cause: WSF-failed
  Code: F999723

  I'm waiting to activate fast playback.

  See you soon.

  Looking at the logs you posted there is an inconsistency in the algorithms between scp server and the ucs system. Server accepts the aes - ctr and ucs uses aes - cbc?
  Maybe try adding

  "The cipher aes128-ctr, aes192-ctr, aes256-ctr, aes128-cbc" to/etc/ssh/sshd_conf

• Not the users and groups folder under computer management

  Original title: no access to users and groups in Windows 8 Pro

  Right click on computer, select Manage

  There is no option in the management of the computer!

  WHY? How to view?
  Thank you
  Hi Johnny,.
   
  
  Looks like you are unable to get users and groups under computer management.
  
   
  I would like to gather information to help you:
   
  
   
  (1) how do you try to locate users and groups under computer management?
  (2) you are able to view other folders in the same section?
  (3) don't you make changes to the computer before this problem?
  
   
  I suggest you to check if the steps will help you to locate users and groups folder under Computer Management:
   
  
  (a) Windows and X set button, and then select computer management.
  (b) double click on system tools.
  (c) click on local users and groups.
  (d) check if you are able to find users and groups folder.
   
  Do we not respond with the status of this issue.

• I deleted the account current user which I use through, Mycomputer manage option, know that I am in this user only, please help me restore this user...

  I deleted the account current user which I use through, Mycomputer manage option, know that I am in this user only, please help me restore this user...

  Hello

  Who is the user account you have currently connected?

  Research of user in the sub folder location:

  Folder C:\Documents and settings\Users

  If you find in the folder the administrator account user, then you may need to create a new user account and transfer of records and documents to the new location

  See the link for the procedure below: how to copy data from a corrupted to a new profile in Windows XP user profile:http://support.microsoft.com/kb/811151

• Error UCS Manager Console KVM to open after Java Update

  After the upgrade to version 1.7_21 Java I tried to access the KVM console from within the UCS Manager (v2.1 (1 d)) and get the error message:

  "Cannot run the program"C:\\Program": CreateProcess = 2 error, the system cannot find the file specified."

  I tried to remove installed applications and applets as well as temporary files from the Java console inside, but it does not solve the problem. We also tried to launch the console KVM in KVM Manager and that works very well. Everything works correctly when you run Java 1.7_17.

  Everyone knows about this problem since upgrade to 1.7_21?

  Thank you.

  In the meantime, you can install Java in a directory path that has no space to work around the problem. For example: c:\Java\jre7

  This will give you access KVM again.

• UCS Manager & Vmware

  Hi guys,.

  Before we set our Cisco UCS solution in we have Vmware running with Nexus 1000v switch. After the installation of the Cisco UCS solution, we migrated a lot off the coast of the old system to the new. By reading the manual on setting up vCenter, Port and VMS profiles in UCS Manager, it seems that this creates a new on the nexus 1000v vsm. Anyway is to import what we have so that we see in the UCS Manager?

  David, the functionality of the UCS you speak is known as VN-Link in the material while the Nexus 1000v is known as VN-link in the software. Installation and configuration is very similar to the Nexus 1000v but they are separated distributed virtual switches.

  Unfortunately, you can't use both because they require the VEM loaded on ESX hosts and the UCS VN-link requires a login policy dynamic UCS vNIC. If you use the 1000v, you will not be able to use the VM tab in UCSM and you will not see anything on the virtual computers tab on a Service profile.

  In my opinion the Nexus 1000v is preferable because is offer more features, more scalable and is managed/set NX - OS. Of the UCS VN-link option also limits the number of virtual machines, you can run on a host computer, because the dynamic vNIC takes in charge a maximum of 56 depending on how rising your chassis to your FIs. If you have only 2 uplinks of your chassis then the max machines virtual host when using the UCS VN-Link is 20-24, according to the number of vNIC ESX host, you create as part of your Service profile.

• Unable to SSH cisco CSM server

  Unable to SSH to the server of cisco CSM

  Hello world

  Trying to SSH new server Cisco CSM.

  ACL is which allows ssh I see suddenly increment account, but when I try to ssh it gives connection refused error.

  I have to open the port on csm ssh server?

  If so can someone please let me know hot to do?

  Concerning

  MAhesh

  As mentioned in the forum of firewall...

  The CSM itself server doesn't have ssh daemon top to meet these demands, unless you added some other 3rd party software. It's just a Windows Server that runs an application (CSM).

  CSM uses https for the client software (Java applications) to communicate with her.

• 6120 link down on mgmt0 triggers not UCS Manager failover cluster - is?

  Hello friends

  We have recently installed a cluster consisting of two 6120 UCS s configured for HA. When executing fail during test cases, we removed the network cable in mgmt0 on 6120 elementary. Immediately the cluster IP address is not responding ping (as expected) and we lost connectivity to the UCS Manager GUI (also as expected.) At one point, however, we expected the 6120 subordinate to detect that this link was down and launch a failure over the UCS. This is not moved after 20 minutes of waiting.

  My questions are the following:

  1. Is this expected behavior?
  2. If this is not the case, what should us review to ensure that failover occurs in the future?

  I know we can force a failover of the subordinate by issuing a command to the main cluster of local-mgmt but would be interested to see if it should be automatically produced on the failure of primary mgmt0 binding.

  Thank you for your time.

  Configured by default which is the expected behavior.

  You can configure management interface and failover if the management interface loses connectivity such as your test scenario.  That's what you're looking for.

  Admin - Communication Management - Management Interfaces - Management Interface tab strategy control tab.

  

  Kind regards

  Robert