using a T-connector to connect 3 USRPs damage devices?
I think connect 3 USRPs via a connector in t there any risks involved? Must be some special tip, like a pump connector, or it can be any T-connector?
Thanks for the help!
Filip
Thanks for the warning!
But are there risks if I connect 2 devices using the attenuator 30 dB and the cable that appeared in my USRP buy? Should I me also bothers the powers of Tx on devices or there is no risk if I use the cable NOR and the attenuator, reagrdless of the Tx power I put? As far as I can see, the actual maximum Tx gain is about 35 dB and the attenuator kills virtually everything.
Thank you!
Tags: NI Products
Similar Questions
-
Audio output using the USB connector problem
I use a USB connector to connect with Audio output. It's because my headphones Jack does not work.
It worked without problems so far.
My problem is that there is no output from my laptop to this USB device. The music plays and can be heard on the laptop. Connections (USB device & son) of the laptop work.
I'm ising Vista home versio
Any ideas?
Try this:
With the USB speaker connected, right click on the speaker icon on the tray (right), left click on 'sounds '. On the tab 'Read' the USB speaker should be listed, click to select it, and then click the button "set as default". Click the OK button to exit.
Alternatively, you can go to control panel, Sound.
-
Problem with connecting to USRP N210
Hello
I have some connection to the USRP N210 device problems. I have 2 in my possession at this moment and I use a switch to connect the two to my laptop. Thus, 1 has a IP address of 192.168.10.2 and the other has 192.168.10.3. I can connect however only la.2.3 device and not a. Even when I plug unit only 1 to my laptop (without the switch), I still can only connect to the peripherique.3 and not la.2 one.
.2 device appears in the application of devices to find however and I can ping to it. Only when I try to connect to the device through Labview, I always get an error.
You have any ideas about what could go wrong here?
My specifications:
LabVIEW 2012 (32 bit) + Modulation toolkit + OR USRP API
Windows 7
Hello!
Two quick suggestions to try:
1. is the firmware update for the FPGA and EEPROM.
2. What is the error you get in LabVIEW? (Explanation of text and number)Erik
-
When to use the global connector off-page vs distinguish
New Multi-SIM-
Y at - it a tutorial for the use intended for use off-page connectors and not global?
1 suppose that the nets must be connected to a number of fact sheets, global connectors must be used or off-page connectors of the same name should be used. What the intention of the two?
2 connectors global connectable to buses in order to link the leaves? or off-page link must be connected to a bus?
An explanation must be entered in AID and perhaps a tutorial.
Thank you
Hi johnkimura,
In the help file, you can find specific types of connectors, and you can find the documentation for help on the connectors. The difference between a page off and a global connector which is a page out connector is visible on the same level in the hierarchy. Which means that if you are in a secondary circuit, you can use a page off connector to connect to another secondary circuit at the same level.
For Bus lines, you must use the bus connector page.
I hope this helps.
-
I do not use sync and am not connected? Why my favorites are synchronization?
My desktop computer has a series of bookmarks that I use at work. My home PC has another, different set of bookmarks that I use at home. I do not use sync and am not connected to sync on each PC. Why my favorites are the synchronization between two PCs? For example, I noticed several bookmarks near the top of my bookmark menu over a line of separation that I do not have to work. I deleted them. I come home and find those missing same bookmarks from my PC at home. I do not want to synchronize anything between the two computers, why what is happening?
Maybe an add-on is the sync these for you.
Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information.
Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.
Refresh for Firefox:
- Open the troubleshooting information page using one of the following methods:
- Click the menu button
click Help
and select troubleshooting information. Should open a new tab containing your troubleshooting information.
- If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
- Click the menu button
- At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
- Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
- Click Finish and reopen Firefox.
This corrects the problem? Please report to us!
Thank you.
- Open the troubleshooting information page using one of the following methods:
-
Using Apple ID them to connect to Macbook Pro
Hello
I used to be able to connect to my macbook pro with my apple ID and password. However, recently I had to restore my macbook and pure install El Capitan, and since I see no possibility to use my apple ID to sign in my macbook pro. I must necessarily use the local user name and password to connect.
Can someone please explain the steps to activate the connection to my macbook pro using my apple id?
This option has been drained in El Capitan. If you went to El Capitan, he would still continue but with a clean install of El Capitan, you cannot configure with your Apple ID.
-
I am using windows 7 Home premium. Button Firefox connected if slow to get on the internet, so I used the reset button. Now, firefox is configured to use the proxy server refusing connections, unreal... I hope you can help soon... Thank you, Donna
you are the very welcome!
It should be possible to select what happens when you click on an e-mail link in the applications Panel in the firefox options. For more information, see change the program used to open e-mail links
-
the proxy server refuses connections"Firefox is configured to use a proxy server refusing connections. The result is no internet
You are welcome
-
I can't access my hotmail account among some other sites since the upgrade to 3.6.8 on my macbook. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings to make sure they are correct. Contact your network administrator to make sure that the proxy server is running. "I can not even find the proxy settings more.
Windows: Tools > Options > advanced > network > settings
OSX: Firefox > Preferences > advanced > network > settings
Linux: edition > Preferences > advanced > network > settings
Set your settings to connect to the 'No proxy', if you are not using a proxy.Firefox 3.6.6 added a new preference for connection settings, use proxy Panel"system settings", and the default value is the point. " This new preference does not affect most users, because they probably do not have a proxy set in place in their operating system. Therefore, most users should use the setting "no proxy".
-
My IPad 2 Air is mad, he gets on its own, and it freezes. Not to mention it locks me. Didn't this iPad for 2 days. Have not been able to use it! I tried connecting to ITunes and will not work!
Hi Kareyfabela,
For this kind of problem, I strongly recommended opening a pension with Apple iPad case will probably require inspection by an Apple engineer. You can open a file on this site: https://www.apple.com/support/contact/
I hope this helps!
Jonty
-
I use an IEEE-488 GPIB connection to a keithley 2400
I use an IEEE-488 GPIB connection to a keithley 2400. I get an error - 111 an error header seperator and a header not defined-113. I need to know how to fix this problem and install this keithley with a probe workstation. I'm new to labview and uses old code that I attached below all information on troubleshooting, the block diagram would be greatly appreciated thanks.
Why are you using the old code? Go to help > find instrument Drivers. Follow the directions.
-
Hello
How can I connect to my s
Server (which runs on windows server 2008 rc2) via IP REAL using rdp, while the VPN connection is active?Hello Marie Smith.
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.
http://social.technet.Microsoft.com/forums/en-us/winservergen/threads/
Hope this information helps.
-
I want to use my internet wireless to connect to my TV and start watching netflex, how or what I can?
-
my Dell inspiron n5010 is unable to use an ip address to connect to the internet?
my Dell inspiron n5010 is unable to use an ip address to connect to the internet? and I went into Device Manager > network adapters > then I face three options 1 > virtual broadcom wireless adapter > DW1501 wireless-n WLAN half mini card > Microsoft virtual WiFi Miniport Adapter that should choose?
Thank you very muchHello big evil Dossary
Follow the steps to connect to a form of wireless link below. Thank you. -
I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available
Hello
I suggest you to follow the steps in this link and check if it helps:
It will be useful.
Maybe you are looking for
-
Found the instructions to get this pest out of my great Firefox, but have forgotten how to access Firefox 'tools' so I can do it. Please remind me how to get the 'tools' to show in the top tab so that I will not curse every day as Malwarebytes appear
-
I have a mac-mini end 2012, OSX El Capitan 10.11.3, 2.5 GHZ intel core i5, 116 GB 1600 MHZ, DDR3 When I connect to my Chase account using 1Password, I get the message "Safari cannot open the page because the server has quit unexpectedly the connectio
-
LabVIEW cut values after 3 decimals
Hi guys,. IAM facing the problem that my Labview Vi written only 3 decimal places for each value in the .csv file. Right now iam wondering where on the way the decimal places to cut. I've implemented a Matlab script that creates my x-axis 20 nanoseco
-
[FORUM: the message below is a copy of what I presented on the request page or feature, but I thought I'd see if people here think it's a good idea?] Hello! I would like something similar to this: In Multisim I can drop a "commentary" on the schemati
-
Windows update code error 8007370B
Hello My windows vista computer is set to automatic download and install the updated windows and it works well but the last windows dec.2008 always prompt me that windows cannot check the update and if I try to do it manually I got this 8007370B erro