Problem with connecting to USRP N210

Similar Questions

• Problem with connection for ePrint

  Hello
  
  Today, I brought a new printer - all in one, HP Deskjet INK Advantage 3520. All functions are OK, but I have a problem with ePrint.
  In practice, the printer is connected to my wifi at home and I can print without USB cable with no problems. But when I want the ePrint of installation function, I get an error that the printer do not have any internet connection and I can't complete the configuration of the service.
  
  Do anyone know how I can eliminate the problem?
  
  Thank you
  Denis

  Hi DenyKr,

  I see that you are having problems with your printer, connecting to web services.  I would like to try the following steps.

  1. open the internet browser type printer IP address.

  2 should bring you to the status of the printer page.

  3. Select the tab network at the top.

  4. left side select IPv4 under wireless.

  5. under DNS address Configuration select manual DNS server.

  6. for favorite enter 8.8.8.8

  7. for alternate enter 8.8.4.4

  8. Select apply. You can get a warning saying that this could break the connection which is very good.

  9. turn the printer off for about 30 seconds, then try again.

  Let me know how it goes.

• I have a problem with connecting to Skype, get error code 1001 on my event viewer

  I have the latest version of Skype installed and have not been able to connect. I had Skype for over a year and my computer has developed a problem with a memory stick and after that I came back from the repair shop, it didn't work. They had removed Skype from my system so I reinstalled and cannot connect.

  And this is related to the Windows XP files, folders and search for how?

  Ask here:

  SKYPE FORUMS:
  http://Forum.Skype.com/

• Strange problem with connectivity

  I had this problem with one of my computers I'm trying to connect to my router ea6500. I have several wired devices and wireless but who are working very well, the router gives me the questions recently and I had to get back to the form of the plant. Once I had setup the configuration again, one of my computers which had run fine before has an interesting question.

  The computer appears in my router with it's normal internal IP address. And my computer is saying that it is correctly connected to the internet. The question? It is not. All my other computers and devices are excellent connections without interruption of service whatsoever. No idea what could cause this kind of problem?

  After crossing, my pilots had messed up a stored parameter which was preserved through updates to pilot. I had to uninstall and reinstall the driver for my machine to fix manually Ethernet controller.

• Pavilion dv4-2170-us has problem with connection light display

  The cover on my laptop seems to have a bad connection, because I have to play with the angle to get the screen to

  show anything.  Sound very, very delicate.

  Is this something that can be fixed by a tech or should I get a new laptop?  I'm asking because there is another nother

  problem with function of my computer.

  HI @compugirl ,

  I understand this thing you display may have a bad connection that you have to play with, then fish on the screen to show the line.

  Want to know if this could be fixed by a tech.  The short answer is Yes.  Here is a link to 2009decembre 17 December 17, 2009 HP Pavilion dv4 Entertainment PC Maintenance and Service of Guide. Please note Chapter 3 page 3 for a list of the replacement screens supported by number of the part.

  It may just be a connections loose as you said, either a bad connection cable...  The cable may have become defective through the opening and closing of notebook, during normal use.  Please note Chapter 4 page 27 for the removal of the screen procedure.  Before considering the replacement of the screen, I would try a new cable first to exclude it.  You should be able to buy the cable to any computer supply store.

  I hope this has helped.

• I have problems with connecting by Modem DSL Siemens SpeedStream 4100.

  I have a little problem with my modem. I have a strange situation in which my internet goes several times a day (about 50-200 a day / every 10-15 min). I can't find the answer as to why this happens, however I noticed that whenever I get a phone call, my internet will. So that I get my signal back I have to make a phone call, so I just call my house to get a busy tone. My internet will come back without a doubt, but I don't think it's fair to make this happen. What could be the reason for these problems and how I could fix them? I have a PPPoE Setup so I am connected through a router, however, this problem happened a long time ago (I don't remember if it is since I have the modem). I'm in a laptop, but the question that's happened since a direct link between the modem and my desktop via cable Ethernet.

  Its been years and I have still not found a reason as why it happens. I know several people who have the same problems as me, and I would like to have days when my internet doesn't go away every 10-20 minutes. Any suggestions why this is happening or how to fix?

  Thanks, best regards

  Paul Zapata

  http://en.kioskea.NET/forum/affich-19259-router-disconects-when-phone-gets-used

  Read the above.

  Do you use a junction box on the phone, including extensions of each phone?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Here are the General news when Internet is de-energized;

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with connecting to Windows normally

  OK, so I'm having a problem with a record in my laptop normally and the only way I can get to it is by going to safe mode.

  Basically what happens is that whenever I try to connect my computer normally (not in safe mode) I'll type in my password press enter it will come with the welcome sign and this small circle that tells it to load but it never is as if this drive does not work because the lamp flashes not or anything like that. However, it is very well whenever I login in safe mode and that the laptop came with windows vista on it that I don't have a copy of windows vista to try and slove the problem. This problem acerd after I restarted my laptop because it was slow and contributing generally to make it work properly again, but now this has happened and I don't know what to do.

  If someone could help me? I really need my laptop back to normal because right now, it's my only access to internet that not working I really on heavly for my college.

  Thank you for taking the time to read this and thanks for teying to help me.

  Hi Lexiey,

  A. recent changes made on your computer?

  B. you get any error message?

  You can start in safe mode, and then you put a computer to boot and then restart the computer in normal mode controls whether the issue persits.

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer in normal mode and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode. Uninstall or update the program that is causing the problem.

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• problem with connection to the internet after installing Windows 7 on new hard drive

  I have problem with old hard drive, so I change. I replace it with a new drive of the same size, so I download the Windows 7 disc to reinstall it. I received the product from the bottom of my laptop key. all look good, until when it is I can't connect to the internet. I can't find also manage network connections on my computer. When I go to "change the map settings" nothing is there. "when I go to connect to the network, not connected to the top pop, then I'm going to shoot bad to say" windows did not detect a network card installed properly, if you have a network card, you will need to re install the driver. "windows can't find a driver for your network card. Please help my fix to this problem. Thank you.

  You must download and install the driver for your network card.  It is best to get it fron the computer manufacturers web site.  You will have to get on another computer and copy it to a Flash DRIVE or a CD to run on your.

• Problem with connecting to Essbase

  Hello

  We have recently updated to 11.1.2.4

  Since that time we see some questions intermittently while trying to connect.

  We use a user admin native directory connect you to MAXL to run scripts. This keeps failing in between and then if we're going to restart the job, it runs without any problems.

  We have checked through the SharedServices_Security_Client.log and found that, around the same time of the failure, there are a few mistakes here.

  Construction of the cache is for providers, has now begun to unify the cache. It is a status messages. No action required.

  Has failed to unify the Group cache. NULL. Refer to the log file security of the Shared Services for more details.

  
  

  Does anyone has any ideas on this.

  Do you think that the problem is related to the connection attempt to time to "unify the cache?

  I think that we have a framework to refresh Group cache every 60 minutes. is it a good idea to change that at one time in a day interval

  Thank you.

  Tom Thomas

  Usually it is not a problem with Aboriginal groups unless there is a huge amount, CSS JVM info is on https://blogs.oracle.com/pa/entry/epm_11_1_2_how1

• problem with connecting to the service of the administration of essbase

  Hi guys,.

  I have a problem with connectingto essbase administration service using the regional service console.

  There is no place of change taken on the essbase server.

  in the regional service console, clicking the server management component, I can find the essbase administration service is not running.but that will well essbase studio

  My essbase cube is used to be the source of OBIEE data. Now, I can not connect to the service of the administration of essbase, but the POET can read data in the essbase cube.

  Someone at - there experience this problem?

  any suggestion is appreciated!

  Hello

  Try restarting the Service of Directors.

  Kind regards

  Manan Shah

• Problem with connecting to the DB

  Hello world
  
  I try to configure DB Oracle 11g network for duplication of the DB and respectively for DATA GUARD and I face the problem with the network of the DB. I can't realize the basic problem. The problem is that after I connect to the DB with the name of the network service, I can't do anything. I get ORA-01034: ORACLE is not available
  Please help me solve this problem. I already do several times in 11.2.0.3.0 without any problem. :(
  
  Oracle DB 11.2.0.1.0
  OEL OS 5.7
  
  env

  [oracle@occ ~]$ echo $ORACLE_SID
  ROCKS
  [oracle@occ ~]$ echo $ORACLE_UNQNAME
  ROCKSU
  [oracle@occ ~]$

  init file
  

  [oracle@occ dbs]# cat /u01/app/oracle/product/11.2.0/db_1/dbs/ROCK.ora
  DB_NAME='ROCKS'

  startup mode

  SQL> startup nomount pfile='/u01/app/oracle/product/11.2.0/db_1/dbs/ROCK.ora'

  Listener.ora

  [oracle@occ ~]$ cat /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
  
  SID_LIST_LISTENER =
    (SID_LIST =
      (SID_DESC =
        (GLOBAL_DBNAME = ROCKS.oracle.cloud)
        (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
        (SID_NAME = ROCKS)
      )
    )
  
  LISTENER =
    (DESCRIPTION_LIST =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
        (ADDRESS = (PROTOCOL = TCP)(HOST = occ.oracle.cloud)(PORT = 1521))
      )
    )

  tnsnames.ora

  [oracle@occ ~]$ cat /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
  
  ROCKS =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = occ.oracle.cloud)(PORT = 1521))
    (CONNECT_DATA =
       (SERVER = DEDICATED)
       (SERVICE_NAME = ROCKS.oracle.cloud)
       )
    )

  lsnrctl status

  [oracle@occ ~]$ lsnrctl status
  ................
  Service "ROCKS" has 1 instance(s).
    Instance "ROCKS", status BLOCKED, has 1 handler(s) for this service...
  Service "ROCKS.oracle.cloud" has 1 instance(s).
    Instance "ROCKS", status UNKNOWN, has 1 handler(s) for this service...
  The command completed successfully
  [oracle@occ ~]$

  Local connection

  [oracle@occ ~]$ sqlplus / as sysdba
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  SQL> select status from v$instance;
  
  STATUS
  ------------
  STARTED
  
  SQL>

  Connection with the service name

  [oracle@occ ~]$ sqlplus  sys/engine@ROCKS as sysdba
  
  SQL*Plus: Release 11.2.0.1.0 Production on Sat Apr 28 18:53:06 2012
  
  Copyright (c) 1982, 2009, Oracle.  All rights reserved.
  
  Connected to an idle instance.
  
  SQL> select status from v$instance;
  select status from v$instance
  *
  ERROR at line 1:
  ORA-01034: ORACLE not available
  Process ID: 0
  Session ID: 0 Serial number: 0
  SQL>

  . / Thank you

  __OUTSIDER___ wrote:
  Can you please suggest me something on?

  RMAN-05535: WARNING: all the log files have not been defined properly.

  bcm@bcm-laptop:~$ oerr rman 5535
  5535, 3, "WARNING: All redo log files were not defined properly."
  // *Cause: It was not possible to define all the redo log files.  This
  //         can occur when LOG_FILE_NAME_CONVERT initialization parameter is
  //         defined but fails to match all the names or causes names to be
  //         created that are not in valid directories.
  // *Action: Query the V$LOGFILE view to see what redo log files are defined
  //          after DUPLICATE has completed.  Use the
  //          ALTER DATABASE RENAME FILE SQL command to correctly
  //          name the existing redo log files.
  bcm@bcm-laptop:~$ 
  

• Problem with connecting to the external server

  I am currently using my iMac with Mac OS X Lion 10.7.5 2011 (11G 63). I have an external server connected to the PC of the window. I tried many times and many ways and yet the error "There was a problem connecting to the server" continues to appear.

  I checked:

  -IP address
  -No firewall
  -Access rights
  -Address external & directory servers

  I used my other new imac and macbook and they have no problem connecting.

  Is this an error in version?

  Please do help.

  Read this article on the basis of knowledge of Apple, there may be something you've missed.

  OS X El Capitan: connect to shared computers and servers for files on a network

  Also this...

  OS X El Capitan: to connect to a Windows from a Mac computer

• Would be switching to a simultaneous dual‑band 802.11n AirPort Express correct problems with connectivity MacBook Air Wi - Fi

  Right now I use an old AirPort Express Terminal (802.11 DSSS 1 and 2 Mbps standard, 802 11A, 802.11 g specifications and a 802.11n draft specification) with AirPort Utility Version 6.3.6 (636.5). My MacBook Air (13 inches, beginning 2014) intermittently loses the Wi - Fi connection. Move to a 802.11n simultaneous dual‑band AirPort Express would correct this problem? I'd be better off with an Airport Extreme?

  AirPort Express frequently asked questions (FAQ) - Apple Support

• Satellite Z930 - suspend the problem with connected USB hard drive

  Hello

  Owner of a newly acquired Satellite Z930-15 X, I have a few questions/problems:

  1) suspends the work of RAM and good hibernation when there is no external hard drive connected. If there is one is connected, the laptop immediately returns back to suspend state. Is there a solution for this?

  (2) is there a way to selectively disable Bluetooth? Currently, only toggle airplane mode is available (with Fn + F8 or Windows 8 charm bar). This activates / deactivates the Wi - Fi or Bluetooth I think.

  (3) the portable computer is wobbly on reception. I put a bit of thin paper at the corner of a bottom (bottom left) so that it can be stabilized. Apparently, the problem is also mentioned in another thread. Is there a suggestion to fhix this problem?

  Thank you.

  1 / what HARD drive is connected to your laptop? When I use the external 2.5 HARD drive with my Satellite U940 I n t have problem.

  2 / I ve tested it on my machine and I noticed the same thing. When WIFI is disabled software BT is off too. I didn t find a way how to separately control adapter WLAN and BT.

  3 / I think that this issue needs to be clarified with Toshiba service. They must check and perhaps exchange rubbers inside.

• Problems with connecting fiber and new router AirPort

  I installed the fiber optic connection to replace my cable modem connection... I have a network of airport for a long time. When I bridge router ISP in my airport network that there are multiple problems. The major is that when you plug the ethernet cable from the modem ISP Ethernet port on the WAN of Timecapsule port all the TC LAN ports go dead. (the ISP's modem has already a cable ethernet in the WAN port or the first port that comes from the optical network Terminal that the fiber optic cable to connect from the outside). I talked to the ISP and they say just use any ethernet port to connect to the WAN port on the TC. On their end, they say everything is connected and works... then it's the Apple... I bought a new TC and changed my ethernet cables, but all I can establish is a wireless network. My network is itinerant and all of my extremes are connected with cables, but all on my main TC LAN ports are dead. I rebuilt my network and the same problem... And I think that the culprit is ports LAN TC is off

  Unfortunately, Apple has designed their routers airport to work with a standard cable and DSL type connections. The fiber is a whole new game ball, and Apple has not yet learned the rules of the game, so you may or may not have a really hard question.

  When you plug the ethernet cable from the modem ISP Ethernet port on the WAN of Timecapsule port all the TC LAN ports go dead.

  Before you connected to the fiber "modem" Time Capsule, did first reset you back to default settings... and then... set up again I hope to work with the fiber optic router?

  If this isn't the case, you need to do whenever you change providers or the modem that the Time Capsule connects to.

  All other devices that might be connected to the time Capsule should be turned off and unplugged.

  Then, if the time Capsule can be configured to work with the "modem" fiber, you can connect devices to the time Capsule one at a time to ensure that each of them is working before connect you to the other.  It may be necessary to reconfigure some or all devices that are connected to the time Capsule so that everything works again.

  Bottom line here... get the time Capsule working first with the "to modem" fibers.  Then start to add other devices to time Capsule one at a time.