Using google DNS servers creates a security hole?

Hello

So I had slight problems with browsing the internet. Although it is not so frequent, sometimes I can not open sites and I encounter the message "safari could not find server'. Therefore, I thought that by using the dns servers of Google (8.8.8.8 8.8.4.4) could help with that. However, I wonder if using a public dns server instead of the ISP can harm to the security of my camera somehow.

Thanks in advance

Do not be afraid.

Tags: Mac OS & System Software

Similar Questions

DNS servers to reset

Whenever I try to set DNS servers, they gave to 12.0.0.1 whenever I OK overall. I am running Windows 7 Home Premium. I did not notice this until very recently. Before, I was able to change the DNS servers and they would stay that way. I have access to the internet and I don't get any kind of errors. The funy thing is that according to OpenDNS Updater I use their DNS servers, but when I do an ipconfig/all, it's to show my DNS server as 12.0.0.1.

Hi MarineComm,

I had the same problem myself, and after a very long time searching, I found nothing that worked for me.

However, this work did for me was this:

1. Control Panel > network and Internet > Internet Options>connections>LAN settings

2 uncheck the box that says "automatically detect settings".

3. yet once reset your DNS settings to those you wanted (OpenDNS or other...).

He came back a couple of times, but after a few restarts, I had no more problems with DNS

Hope this help anyone with a similar problem...

Cannot find DNS servers

When I try to check my DNS servers by 'ipconfig/all', it shows it as the dns servers. Does anyone have a solution?

fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1

Here is the ipconfig/all command

Microsoft Windows [Version 6.1.7601]

Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Marc>ipconfig/all

Windows IP configuration

Name of the host...: Marc-PC

Primary Dns suffix...:

Node... type: hybrid

Active... IP routing: No.

Active... proxy WINS: No.

... DNS suffix search list: hsd1.ca.comcast.net.

Ethernet connection to the Local network card:

The connection-specific DNS suffix. : hsd1.ca.comcast.net.

... Description: NVIDIA nForce Networking Controller

Physical address.... : 00-17-31-CC-76-E4

DHCP active...: Yes

Autoconfiguration enabled...: Yes

Address IPv6 local link...: fe80::d095:78ea:1924:fcaf % 11 (Preferred)

IPv4 address: 192.168.1.102 (Preferred)

... Subnet mask: 255.255.255.0.

Lease obtained...: Sunday 29 July 2012 08:18:29

End of the lease...: Monday, July 30, 2012 19:33:58

... Default gateway. : 192.168.1.1.

DHCP server...: 192.168.1.1.

DHCPv6 IOOKING...: 234886961

DHCPv6 DUID customer...: 00-01-00-01-17-79-6D-2E-00-17-31-CC-76-E4

DNS servers...: 198.153.192.60

198.153.194.60

NetBIOS over TCP/IP...: enabled

Ethernet connection to the network space 2 card:

The connection-specific DNS suffix. :

... Description: Hamachi Network Interface

Physical address.... : 7A-79-05-59-36-1F

DHCP active...: Yes

Autoconfiguration enabled...: Yes

Address IPv6 local link...: fe80::b4ab:f52:698f:1de6% 13 (Preferred)

IPv4 address...: 5.89.54.31 (Preferred)

... Subnet mask: 255.0.0.0.

Lease obtained...: Sunday 29 July 2012 08:18:27

End of the lease...: Sunday, July 29, 2012 20:20:51

... Default gateway. : 5.0.0.1.

DHCP server...: 5.0.0.1.

DHCPv6 IOOKING...: 393902386

DHCPv6 DUID customer...: 00-01-00-01-17-79-6D-2E-00-17-31-CC-76-E4

DNS servers: fec0:0:0:ffff:1 1%

FEC0:0:0:FFFF:2 1%

FEC0:0:0:FFFF:3 1%

NetBIOS over TCP/IP...: enabled

Tunnel adapter isatap.hsd1.ca.comcast.net. :

State of the media...: Media disconnected

The connection-specific DNS suffix. : hsd1.ca.comcast.net.

... Description: Microsoft ISATAP adapter

Physical address.... : 00-00-00-00-00-00-00-E0

DHCP active...: No.

Autoconfiguration enabled...: Yes

Card tunnel Local Area Connection * 9:

The connection-specific DNS suffix. :

... Description: Teredo Tunneling Pseudo-Interface

Physical address.... : 00-00-00-00-00-00-00-E0

DHCP active...: No.

Autoconfiguration enabled...: Yes

IPv6 address: 2001:0:5ef5:79fb:18 c 4: 33e3:3f57:fe99 (Pref

made a mistake)

Address IPv6 local link...: fe80::18c4:33e3:3f57:fe99% 12 (Preferred)

... Default gateway. :

NetBIOS over TCP/IP...: disabled

Tunnel adapter isatap. {1ED6B131-CC39-4975-A48E-8383FC24FB35}:

State of the media...: Media disconnected

The connection-specific DNS suffix. :

... Description: Adapter Microsoft ISATAP #2

Physical address.... : 00-00-00-00-00-00-00-E0

DHCP active...: No.

Autoconfiguration enabled...: Yes

Card adapt 6TO4 tunnel:

The connection-specific DNS suffix. :

... Description: Microsoft 6to4 card

Physical address.... : 00-00-00-00-00-00-00-E0

DHCP active...: No.

Autoconfiguration enabled...: Yes

IPv6 address: 2002:559:361f:559:361f (Preferred)

... Default gateway. : 2002:c058:6301:c058:6301

DNS servers: fec0:0:0:ffff:1 1%

FEC0:0:0:FFFF:2 1%

FEC0:0:0:FFFF:3 1%

NetBIOS over TCP/IP...: disabled

C:\Users\Marc >

Hello

1. you remember to make changes to the computer before this problem?
2. What is the number of brand and model of the computer?

Follow these methods.

Method 1: let us reset TCP/IP and check.
To reset TCP/IP stack to go to this article and follow the instructions.
http://support.Microsoft.com/kb/299357

Method 2 . Follow.
Step 1.
a. connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
b. make sure you are in the configuration - basic configuration category.
c. scroll down until you see "DHCP Server" - if it is disabled, select 'enable '.
d. enable DHCP if you want, you can change the number that starts the DHCP IP assigning. (This is optional)
e. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
f. scroll down and click 'Save Settings'.

Step 2.
a. click Startand then click Control Panel.
b. go to network and sharing Centerand then click on change adapter settings.
c. right-click on Local area connectionand select Properties.
d. Select Internet Protocol Version 6, and then click Properties.
e. Select obtain DNS server address automatically, and press OK.
f. Select obtain IP address automatically.
g. Repeat steps for Internet Protocol version 4 as well.

my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

Step 1

VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

Step 2

When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:
```
/Library/LaunchDaemons
```
In the Finder, select

Go ▹ go to the folder...

from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

Step 3

In the LaunchDaemons folder, there may be one or more files with the name of this form:

com Apple.something.plist

When something is a random string, without the letters, different in each case.

Note that the name consists of four words separated by dots. Typical examples are:

com Apple.builins.plist

com Apple.cereng.plist

com Apple.nysgar.plist

There may be one or more items with a name of the form:

com.something.plist

Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

These names consist of three words separated by dots. Typical examples are:

com.semifasciaUpd.plist

com.ubuiling.plist

Sometimes there are items (usually not more than one) with the name of this form:

com.something .net - preferences.plist

This name consists of four words (the third hyphen) separated by periods. Typical example:

com.jangly .net - preferences.plist

Drag all items in the basket. You may be prompted for administrator login password.

Restart the computer and empty the trash.

Examples of legitimate files located in the same folder:

com.apple.FinalCutServer.fcsvr_ldsd.plist

com Apple.Installer.osmessagetracing.plist

com Apple.Qmaster.qmasterd.plist

com Apple.aelwriter.plist

com Apple.SERVERD.plist

com Tether.plist

The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

Step 4

Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

▹ Safari preferences... ▹ General

and click on

Set on the current Page

If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

Step 5

The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

Step 6

This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

Im trying to open the tutorial of 23 minutes on how to use different tools in photoshop and it continues to come with unable to resolve the DNS servers worked fine yesterday? Ive had creative cloud on my laptop for a week and still have not been able t

Im trying to open the tutorial of 23 minutes on how to use different tools in photoshop and it continues to come with unable to resolve the DNS servers worked fine yesterday? Ive had creative cloud on my laptop for a week and not yet able to get past the basics make me very frustrated.

I guess you meant the links when you open photoshop CC. I tested all four videos of the 23 min tutorial and they all played fine. If something between you and adobe does not work correctly.
- Check that your firewall is blocking the net. Try to access youtube videos and see if they play very well
- Go to the adobe tv site and try to play one of the videos here. Adobe TV
- If youtube plays very well and adobe tv does not work, next is to check if you have flash installed. Some videos require flash, others are html 5. Sorry that I could not confirm what player has been used for this tutorial. I think that html 5 but not sure.
- Next is to look at the properties of your browser and check multimedia settings are not disabled if it y in a. (this is totally dependent on the browser)
If none of this helps, let us know.

I created my site with Muse and uploaded to an external ftp hosting, now my secure log in will not work because I use no BC. Is there a way to create a secure log which will arrange with forced to use BC?

I created my site with Muse and uploaded to an external ftp hosting, now my secure log in will not work because I use no BC. Is there a way to create a secure log which will arrange with forced to use BC?

Hello

Secure area login feature will not work unless you host your website with BusinessCatalyst.

Please take a look at this as an alternative

Password protect Pages Widget for Adobe Muse

Also, check this thread,

Re: Can I create a login/password in the Muse for a HTML5 page or two?

AVG safe Search appears when I only use Google Search on my home page.

My home page is the default page of Firefox with the Google search bar. I like occasional Firefox messages when I log so I don't want to change my homepage. However, when I use the search bar on my homepage only, I get the unsatisfactory results of AVG safe Search.

UPDATE: I realize has now all the troubleshooting information that I included in my original question is displayed under the link "Details of the system more" beside the question, not in the body of the question. I copied here to make it easier to see what I've done to try to solve the problem, but also to describe one clue that I have that may be relevant:

I tried all the fixes on different threads, but my point: config is now Virgin (no avg or isearch mentions; keyword.url is default). Closest solution for you is to https://support.mozilla.org/en-US/questions/866327 , which requires a change of my homepage.

Curiously, AVG safe Search is not a problem when I use Google or search the site of Google toolbar when I use the search bar that appears on my home page (start). This is true even when I return to my home page - if I search from the Google search bar in the middle of the page, I am sent to AVG Safe Search. (isearch.avg.com).

I read in a thread of a suggestion to delete my file chromeappsstore.sqlite in the folder of my profile. As promised, Firefox has created a new when I restarted however, the search bar in the middle of my home home page did not work at all. Tried this three times before restoring my original.

I don't have an application that opens a sqlite file, but I tried to do in Excel and found a cell containing the following text:

emoh.:moz - security aboutsearch engine {'Name': "AVG safe Search", "searchUrl" ': "http://isearch.avg.com/search?cid={7A3C25A0-E345-4507-AA31-D98F596A81A9}" & mid = c48135235ba247d18ac1d14b344db451-addd29eab2809954d5abdf0b991a5b911a297819 & ds = is015 & lang = en & v = 10.0.0.7 & pr = his = d & sap dsp = & q = _searchTerms_ "}

I have no idea what this means, but it's the only thing I can find related to Firefox which mentions again AVG and isearch.avg.com.

At this point, my best guess (but that's a guess) is that the chromeappsstore.sqlite file is a key for a complete solution, but I don't have enough knowledge to go beyond and address it. I appreciate any help anyone can offer.

I think I solved the problem. As someone who has used occasionally used Access and other database applications, I had to first find a free app that would allow me to change chromeappsstore.sqlite. Then, I needed instructions on how change. I found the answers to these two questions to https://support.mozilla.org/en-US/questions/779082 . Thank you Dr. Watson; awaits my needs 10 months ago!

I don't think I'd be able to formulate my questions clearly enough to find the solution without posting here first.

For the people who try this solution do not know databases: make sure that you save a copy of the chromeappsstore.sqlite before trying this fix. You cannot save a copy under a different name of the sqlitebrowser application (or at least, I couldn't find a function "save under").

Login process failed create the security options dialog

Login process failed create the dialog box options security can someone help me?

Hello

Are you tired? Or why do you post this brief description?

In any case, I used google and searched the error message and google has provided a lot of visits.
The solution; Uninstall or disable the Symantec "Norton antivirus/internet security suite scans idle time-out.

To be honest, I don t use Symantec Antivirus because it takes a lot of resources material I use the free and smart Antivir Ariva.
It analyzes the complete systems and my laptop runs much faster

Policy update for several networks with specific DNS servers

I have a network of medium size with 5 locations with different IP addresses. All the sites host their own DNS servers and connect directly through a dedicated VLAN access provider.

Main site	10.1.1.1	255.0.0.0
Remote site 1	192.168.100.1	255.255.255.0
Remote site 2	192.168.101.1	255.255.255.0
Remote site 3	192.168.102.1	255.255.255.0
Remote site 4	192.168.103.1	255.255.255.0

All sites can be managed via the main site, but have their own DNS servers on-site.

My goal is to point all computers and devices on a new DNS server for their previous static assignment. (XP and later)

My question is can I use GP or DHCP * for information push on each apparatus, this DNS server that makes site specific without having to travel to these places?

Requirements:

All devices of 10.1.1.1 10.1.1.2 to 10.1.1.4 change (old decom 2 k 3 Server)

At each location of 192 DNS servers will have to point the secondary server to 10.1.1.4

Handheld devices will use 10.1.1.4 as primary and 10.1.1.3 as secondary.

Devices at each site shall keep their respective DNS server.

* If I use DHCP to change the information on a per level of scope, I can use GP to force computers with locally defined static assignments update the static DHCP assignments

Bonus: If someone can give me an estimate on how much traffic/band bandwidth network that it would create would be great because I consider well shift assignments as I am a business 24 hours a day.

Hello

I advise you to repost the question to the TechNet forum for assistance.

http://social.technet.Microsoft.com/forums/en-us/home?category=itmanager

Using google DNS servers creates a security hole?

Similar Questions

Maybe you are looking for