Using laptop in a vehicle.

Similar Questions

• Used laptop non-genuine Windows installed and need genuine software

  Original title: used laptop requiring drivers facilities. Buy XP - Pro online, schedule that was not a product official m/s. laptop is locked. Can only F-10 @ startup which ID. fake software...

  Computer locked up. Will not open cd/dvd drive, internet, USB, connection, etc. Opens only the F-10 start but suggestions to correct won't open either. OK he asked official purchase online or enter a new serial number of the product. My problem is that I can't support line, my cd/dvd drive does not work, my wireless card does not work, etc. Any suggestions to fix my problem. Thanks a lot for the useful tips.

  Hello Leonr931,

  I would still recommend to contact the computer manufacturer for assistance in obtaining their process of system restore.

  This may require a set of disks and they can cost a small fee.

  In addition, they will be able to help you with the physical errors on the machine.

  Best regards

  Matthew_Ha

• I bought a used laptop. How can I clean the computer and only the program that the value of the factory. It's a dv4000 HP clubhouse with windows xp

  I bought a used laptop and the previous ovner couldn't remember his password since it's been more than a year she opened a session.  How can I clean the computer and restore it to that only programs that comes with it when buying or facotry settings.  It's a HP Pavilion dv4000 with windows xp?  I have not all discs.

  Go here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00006110&tmp_task=useCategory&cc=us&dlc=en&lang=en&lc=en&product=464513 and click on the link that best matches your computer (e.g., Presario, Pavilion and HP Compaq Business PC manufactured and sold in 2006 or later).

  Assuming that your computer is 2006 or later, following the links eventually will lead you to the following directions:

  
  

  Reformatting a hard drive should be considered a last resort to solve a problem with a computer system. The hard drive can be reformatted and reinstalled the operating system, using the system PC Suite hard disk recovery. Reformatting the hard drive will overwrite all data on the disk. To preserve the data, back up the data of the user as; letters, leaves of calculation, graphics and emails to an external storage device before you reformat the disk. If the PC does not work in the Windows operating system, see reformatting since the recovery disks .

  Do the following to reformat the hard drive and reinstall the operating system.

  1. Connect the PC to the power adapter.
  2. Close all programs.
  3. Click Start , click principally made programs , select System Restore and click on the PC recovery .
  4. When the recovery options are offered, select the option to perform the Recovery of PC and click Next .
  5. The PC will restart.
  6. When the recovery of the PC of welcome message, click OK to continue.
  7. In the system recovery Panel, select System Recovery . By default, the system will perform a complete reformat and will destroy all user data.
  8. Restart the PC when prompted.

  As alternative method for the steps above, click Advanced Options , select the destructive recovery option and click Next to begin the reformatting process.

  The PC is in original factory State and all data in the system, such as the place and the date must be reconfigured.

  NOTE: any software "trial offer" has been included in the original factory image, it will be reinstalled, but it won't work (the test period will have expired).  If so any trial software is a security antivirus software or others, before connect you to the Internet, you must uninstall (using an uninstall tool provided by the manufacturer if available antivirus software) and then install your own anti-virus software.  So, you should download the uninstallers necessary and installers (or buy the software on CD) using another machine before starting this project.

  NOTE 2: See the following important tips from MS - MVP PA supporter (once the restore is complete, click Start > run > winver > OK to determine what Service Pack you have):

  HOW TO get WinXP SP1 or SP2 fully patched after a 'clean install': http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  1. download & save the installer for WinXP SP3 on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5E7...

  [Yes, you can jump SP2 if you run WinXP SP1.]

  2. read & take into account:
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP...

  3 connected as long as administrator, if necessary, double-click the saved file to install WinXP SP3.  Follow the prompts. Be patient and restart twice when the installation ends.

  4. make the resolution method 2 here (believe me):
  http://support.Microsoft.com/kb/943144

  5. go to http://windowsupdate.microsoft.com . Install all required software, and then click CONTINUE. Select CUSTOM and scan | Install the critical updates of security offered. Still, follow all the instructions.

  [I do NOT recommend install IE7 through Windows Update.]

  6. make sure that automatic updates is enabled; FC.
  http://support.Microsoft.com/kb/306525

  Other references:

  Free unlimited installation and compatibility support is available for Windows XP, but only for the Service Pack 3 (SP3), until April 14-09. Chat and e-mail support is available only in the United States and the Canada.

  Go to http://support.microsoft.com/oas/default.aspx?gprid=1173 . Select "Windows".
  XP"and select"Windows XP Service Pack 3 "

  5 steps to help protect your new computer before going online
  [installation clean = new computer]
  http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Measures to help prevent spyware
  http://www.Microsoft.com/protect/computer/spyware/prevent.mspx

  How TO get Windows XP Gold fully patched: http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  1. download & save the WinXP SP2 installer on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=049c9dbe-3b8...

  [Yes, you can jump SP1]

  1B. download & save the installer for WinXP SP3 on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5E7...

  2. read & take into account:
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP...

  3. administrator, if necessary, double-click the saved file to install Windows XP * SP2 *.  Follow the prompts. Be patient and restart twice when the installation ends.

  3B. logged on as administrator, if necessary, double-click the saved file to install WinXP SP3.  Follow the prompts. Be patient and restart twice when the installation ends.

  4. make the resolution method 2 here (believe me):
  http://support.Microsoft.com/kb/943144

  5. go to http://windowsupdate.microsoft.com . Install all required software, and then click CONTINUE. Select CUSTOM and scan | Install the critical updates of security offered.  Still, follow all the instructions.

  [I do NOT recommend install IE7 through Windows Update.]

  6. make sure that automatic updates is enabled; FC.
  http://support.Microsoft.com/kb/306525

  References with dubbing:

  Free unlimited installation and compatibility support is available for Windows XP, but only for the Service Pack 3 (SP3), until April 14-09. Chat and e-mail support is available only in the United States and the Canada.  Reach
  http://support.Microsoft.com/OAS/default.aspx?gprid=1173 | Select "Windows".
  XP"and select"Windows XP Service Pack 3 "

  Protect your PC!
  http://www.Microsoft.com/athome/security/computer/default.mspx

  Learn how to protect your PC by taking the three simple steps
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3AD23728-497...

• Factory reset product key now need but also used laptop wallpaper

  Factory reset product key now need but also used laptop wallpaper

  Hello

  If you use manufacturers recovery media that you don't normally need to put product Kety on the laptop

  Contact the manufacturer of your laptop to this topic

  as you have a preinstalled OEM license Vista that is all the help we can give you

• Laptop HP model red Flyer 15-f: windows, used laptop model 10 15-f272wm

  I am a novice with this topic, pc and tech stuff more, so forgive me if I'm doing this wrong. I bought a used HP laptop, or is it now called "specifications"? Connected, wifi came on no problem. I don't have any book or document info. No doubt cause renovated. So I get on the blue HP screen and he wants a name and a password before anything else. I filled. I tried to scroll down, would not go. Tried "enter" and back and almost all of the keys when it froze on HP connection. Using a Vista to send this message. I don't think that I'm locked in question cannot open a session. If anyone can tell me what a simple gesture to continue set up? Is it possible such as "enter button is damaged?  Is there a "next" in a box I have, this is down low on the screen? So how do the page to scroll down? Any help appreciated. Don't even know if it has a warranty. Usually a consumer except for mecahnical pc and internet. Apreciate if there is an answer.

  Spoiler (Highlight to read)

  If the laptop / notebook is refurbished, peux I guess you don't have any data user or user profile on this system yet?

  If the answer is no, then try the following:

  Turn on/off the laptop, as the POST of HP blue screen appears, press the "F11" on the keyboard several times. (You will have to perhaps put off the system by holding button power for 5 seconds and try again if you don't get the first screen).

  This takes you to the HP System Recovery screen. If this does not work some systems we key "ESC" in the top left corner of the keyboard instead.

  Once you enter HP System Recovery, you should be able to follow the instructions to make a complete system factory restore. Please note: this will remove all data and profiles of user of the laptop, including the user profile that you can not connect, as you seem to have the right username and password available.

  This process will take about 1 to 2 hours, so be patient.

  Here is a link to a site of HP that explains exactly how to run Factory Restore:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c02638587

  Once the system restore is performed, and it puts, it should take you back to the 'Out of Box Experience"or OOBE for short.  This will take you through the implementation of the system with your own profile of user and installation of drivers and software from the factory for the first time.

  Usually the OOBE takes about 20 ~ 30 minutes in windows 10.

  When you get to the screen asking you to create a Microsoft Account to connect with, you can create a new Microsoft Account If you wish, or use an existing one.

  If you don't have any internet connection and make it 'offline' then I would suggest that you choose the option "Next" without fill in a user name and password. The next screen will ask you if you want to create one "offline User Account" is a great idea if the system will not be connected to the internet permanently, for example, if you use a mobile device to broadband as your mobile phone to provide internet, instead of a system always activated as ADSL via wifi.

  If you get stuck, the message comes back with the details and I will answer when I can.

• Not using laptop Satellite A665 3D 3D when you use WinDVD BD (3D version)

  Hello

  I bought the laptop A665 3d and loaded the Nvidia drivers for the 3D provided with the laptop package. The slide show after you run the wizard 3D grand worked full 3D and 3D of TOSHIBA VIDEO PLAYER worked as well (when you use one of these you see 3D glasses come to life) but I can get t a blue disc 3d ray to work using the player pre-installed.

  Installed WinDVD BD (v10), it says it supports 3D and in options, it has a 3D tab which configuring 3D top of page option is set to off but it is also grayed out so that you can t change.

  I have 4 movies in 3D on Blue ray and none work. They show the blurred image on the screen but the glasses don t seem to turn it on.
  I TRIED enabling 3D on the start menu.
  The upgrade of WinDVD BD
  Looking for help and not where it mentions 3D.

  Which version of the nVidia Driver is currently installed?

  Download the nVidia driver updated on the Toshiba site to the www.csd.toshiba.com

• Can I use laptop Toshiba Win7 with another drive?

  Hi guys,.

  is it OK to use my drive to win 7 of my tosh and put it in my other Vista laptop?
  Thank you

  Original Win7 recovery disc is designed for certain model of laptop and contains drivers for some hardware platform so it cannot be used on another model of laptop.

  Try it, you can not damage anything. Just to see what will happen.

• 15 - ac122tu: using laptop without battery connected to the unit

  I use my laptop for almost 5-6 hours per day on a desk. Since I'm under it constantly for 2 to 3 hours, remove the battery from the camera so that the heat generated by the processor does not affect the battery life?

  Hello

  It is actually in your situation. If no power, then you will be ok BUT if power outage suddenly your machine may be dead in the water.

  Kind regards.

• Pavilion 17-g173ca: use laptop without battery?

  When I bought this laptop a few months ago, the seller advised to remove the battery with power cord plugged. She said she would smoke less on the heat generated.  I wonder if this is advised.  If I remove the battery, I lose everything I'm working on.  I noticed it's hot, but not terribly so, and inconvenient, the vents are on the same side as the mouse.

  Where I live, it is not unusual for the flash output disabled for a second or two, if a storm is coming.  We have most of our serious electronics plugged into a battery backup, just for that purpose.  Unfortunately, we do have one for the laptop.

  I wonder if anyone out there has thoughts on this issue?  I would be grateful for feedback.

  There is some truth to what the seller says, but I think that far too much thought goes into the laptop batteries. Let it in and use it. Try to join a plan of handling of the battery will add very, very little in the life of the battery and that you wisely pointed out, the battery in a laptop is a UPS when used in a desktop mode. I say relax, set it and forget it.

• When you disable the trackpad (cant use laptop computer mouse), if I add a wireless mouse, it still works?

  I have a hp 650 and I can't disable the mouse and trackpad on the laptop, but if I install a top wireless mouse and disable the trackpad while using the wireless mouse, wireless mouse still works? Thank you

  Thank you, and will be the laptop trackpad (once connected disabled and wireless, mouse), will be always off trackpad while mouse wireless can still be used? Thank you

• I have a used laptop and need to find a license key code to update the drivers but I don't know where he is.

  Sometimes you need a license code for various reasons, but if the computer is used how to find this information?

  He invites product key for Office?
  How are you drivers updated? You use Windows update?
  You can check the link below to replace a product key Office lost or damaged.
  http://support.Microsoft.com/kb/2548260
  Note: If you bought the laptop from a third party, and the Office has been installed by them, it is not possible to transfer the license according to the EULA.
  http://Office.Microsoft.com/en-us/help/view-the-end-user-license-agreement-EULA-HP001095720.aspx

• Using laptop with an additional monitor above. To set the default appearance as Monitor 2 above 1 monitor

  I can set up my laptop with an additional monitor as extended desktop.  By going to the followed control panel display I can manually fix the default setting for the two monitors side by side, to have one on the other.

  However, every morning when I do my laptop in to work and reconnect to the extra monitor I have to redo it.  Is there a way to set the default display settings so that it affects automatically two monitors as one above the other?

  Using Windows XP Pro.  Help appreciated.

  Hi Andrew_Wright,

  Windows XP does not record the settings once you unplug the extra monitor.

  You can use some third party such as the software provided with the video driver software.

  Use your favorite search engine to find all these software for you help.

  Important: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• I have windows xp product number, how do I get a CD coy, because I bought a used laptop, the CD has lost.

  I have windows XP product number on the label on the back for laptop, how can I get a copy of the CD, because I bought a used, the CD has lost.

  Hi LaurenceWang,

  If the installation of the operating system is the Original Equipment Manufacturer (OEM), you must contact them to get the CD.

  Otherwise, contact Microsoft Supplemental and replacement parts in your area for a new CD.

  For more information, see:

  How to replace Microsoft software or hardware, order service packs and replace product manuals

• HP DV6 NOTEBOOK AUDIO GOES OFF AFTER A FEW MINUTES, ENVY MUST RESTART EVERYTIME I USE LAPTOP

  HP DV6 ENVY LAPTOP PC

  Product number: C2L31UA #ABA

  8, 64-BIT WINDOWS

  Hi, my problem is that my audio goes off after a few minutes, then if I want it back I have to restart the PC and it seems in good condition, but imagine having to restart your computer after you have initially fed up whenever you want to use the PC. The Support assistant says that my drivers are up to date, that the problem may be due to the fact that I didn't have this problem until recently who told me that one of the automatic updates at the origin of this problem.

  In addition, a problem that has never set was my internet inexplicably drops for no apparent reason. Sporadic problem and has nothing to do with my connection as it has occurred in several physical locations. Open Internet explorer by clicking on 'fix the fitting' works after a few minutes, but it is only a band-aid solution.

  Any help would be much appreciated.

  Signed

  EXTREMELY FRUSTRATED AS MULTI BILLION 2 COMPANIES MICROSOFT AND HP IS UNABLE TO MAKE USABLE PRODUCTS. I GUESS THEY WANT PEPOPLE TO MOVE TO APPLE. SORRY FOR THE RANT. A SENSE OF DESPAIR.

  Hello

  On the audio issue, try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the update of KB2962407, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  If the pesists of the problem, right click on the speaker icon in the taskbar, then select playback devices.  Right click 'Speakers and headphones' (or speakers/HP), and then select Properties.  Select the Advanced tab, and then remove the check box "allow applications to take exclusive control of this device."  Click apply and then click Ok to save this change.

  Restart the laptop.

  Kind regards

  DP - K

• I bought a used laptop with a version of Win7 OEM and license will not authenticate.

  Hi, I believe that the seller must have used a version of Win7 OEM upgrade but wiped the original OS from the laptop.  I've been going round in circles with the supplier for weeks now nothing does.  They want to send back me the phone so that they can "Watch".

  It is the diagnostic report.

  Rgds Frank

  Diagnostic report (1.9.0027.0):

  -----------------------------------------

  Validation of Windows data-->

  Validation code: 50

  Code of Validation caching online: 0x0

  Windows product key: *-* - 74XYM - BH4JX-XM76F

  The Windows Product Key hash: KeYfcvXg/a1Q01x73 + f8IL/JC4Y =

  Windows product ID: 00359-112-0000007-85441

  Windows product ID type: 5

  Windows license type: retail

  The Windows OS version: 6.1.7601.2.00010300.1.0.003

  ID: {4D929D1D-FEDD-4074-9509-85B98BBE74E3} (1)

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Product name: Windows 7 Home Premium

  Architecture: 0 x 00000009

  Build lab: 7601.win7sp1_gdr.150113 - 1808

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  OGAExec.exe signed by: n/a, hr = 0 x 80070002

  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->

  Office status: 109 n/a

  OGA Version: N/a, 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->

  Proxy settings: N/A

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)

  Default browser: C:\Program may Explorer\iexplore.exe

  Download signed ActiveX controls: fast

  Download unsigned ActiveX controls: disabled

  Run ActiveX controls and plug-ins: allowed

  Initialize and script ActiveX controls not marked as safe: disabled

  Allow the Internet Explorer Webbrowser control scripts: disabled

  Active scripting: allowed

  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->

  Office details: {4D929D1D-FEDD-4074-9509-85B98BBE74E3}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-XM76F00359-112-0000007-854415S-1-5-21-3946564470-1629378854-4067432594LENOVO7459LK9LENOVO6DET30WW (1.07)20080910000000.000000 + 000FEB40E00018400F818090409GMT Standard Time(GMT+00:00)03LENOVOTP-6 d 109

  Content Spsys.log: 0 x 80070002

  License data-->

  The software licensing service version: 6.1.7601.17946

  Name: Windows 7 HomePremium edition

  Description: operating system Windows - Windows (r) 7, retail channel

  Activation ID: 2e7d060d-4714-40f2-9896-1e4f15b612ad

  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f

  Extended PID: 00359-00170-112-000000-00-1033-7601.0000-3322014

  Installation ID: 018510745823930873493132754653484441985681032355900965

  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338

  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339

  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341

  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340

  Partial product key: XM76F

  License status: Notification

  Reason for the notification: 0xC004F009 (grace period expired).

  Remaining Windows rearm count: 2

  Time to trust: 13/02/2015-17:19:36

  Windows Activation Technologies-->

  HrOffline: 0x00000000

  HrOnline: 0xC004C532

  Beyond: 0 x 0000000000000000

  Event timestamp: 1:30:2015 11:48

  ActiveX: Registered, Version: 7.1.7600.16395

  The admin service: recorded, Version: 7.1.7600.16395

  Output beyond bitmask:

  --> HWID data

  Current Hash HWID: NAAAAAAABAABAAIAAAACAAAAAgABAAEAJJQU3OQsENN6f8Sl8mNkP8D20DrdlExe + EVGyg ==

  Activation 1.0 data OEM-->

  N/A

  Activation 2.0 data OEM-->

  BIOS valid for OA 2.0: Yes

  Windows marker version: 0x0

  OEMID and OEMTableID consistent: Yes

  BIOS information:

  ACPI Table name OEMID value OEMTableID value

  APIC LENOVO TP - 6 D

  FACP LENOVO TP - 6 D

  HPET LENOVO TP - 6 D

  BOOT LENOVO TP - 6 D

  MCFG LENOVO TP - 6 D

  SSDT LENOVO TP - 6 D

  CO-SUBMISSION LENOVO TP - 6 D

  SLIC LENOVO TP - 6 D

  ASF!            LENOVO TP - 6 D

  SSDT LENOVO TP - 6 D

  TCPA

  SSDT LENOVO TP - 6 D

  SSDT LENOVO TP - 6 D

  SSDT LENOVO TP - 6 D

  Your report that you run a license to retail with a default product key that cannot be used to activate Windows 7.

  Windows license type: retail

  License status: Notification

  Reason for the notification: 0xC004F009 (grace period expired).

  Remaining Windows rearm count: 2

  Time to trust: 13/02/2015-17:19:36

  If there is a COA sticker attached to the computer, try to use that to activate:

  Try the following:

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link 'change product key '.

  Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  Otherwise, follow the instructions to return the machine and reactivated it.