Using NI USB-232/4

Similar Questions

• What advantage is there in using the NI USB-232/4 on a standard USB Serial Hub?

  What advantage is there to use the NI USB-232/4 on a shift to USE of concentrator series?

  

  I have an application that requires LabVIEW control of 19 instruments that communicate via RS - 232.

  I have read the Datasheet for the NI USB-232/4, and I see no benefit of spending $528 for this unit (five times) on a standard USB to Serial hub for half the price.

  Can someone tell me if there is an advantage for the NI USB-232/4 or if they have had experince with one?

  Thanks in advance.

  Agile wrote:

  Thank you, NYC for the quick response.

  Why you prefer that your desktop with taken PCI card in charge of ports series? The space? COM stable #s?

  COM stable #s, harder to disconnect randomly, don't have to worry about the bus power, do not have to worry about Windows randomly powering buses as a feature, reliability, often less expensive energy saving...

• USB-232/4 causes Windows hang when wake from sleep

  I have a problem of resumption of the functioning of the laptop that follows "sleep" or "hibernate".

  With the connected USB-232/4, the computer does not return the Windows normally.  The display does not return (without backlight or external video output), but the LED indicators (bluetooth, disc, power, etc.) appear normal.  When I remove the USB from the USB-232/4, the display reverts immediately to the State before the mode 'sleep' activated.  Tried all 3 USB ports - all the same behavior.  No index by using the event viewer.

  Win 7 (64 bit)

  Series NI 3.7, NEITHER VISA NOR spy 2.7.2 5.0.2 MAX 4.8

  Serial port assignments seem to be OK:

  Port 1 - com15

  2 port - com9

  Port 3 - com16

  Port 4 - com8

  Any suggestions on the next steps to solve this problem?

  Thanks in advance.

  Solved the problem!

  The BIOS has a setting in the section advanced to Wake Up capability.  Compatible USB S3 Wake.  Now, the USB-232/4 is powered over the recovery of the standby mode.  When this feature is disabled, the USB-232/4 light not upon resuming from sleep mode and probably hung up the pilot, preventing a normal recovery.

• drivers usb-232 for 7

  Hello

  I use a converter OR USB-232 on 64-bit Windows 7 Prof. Windows 7 says that device works well but MAX does not identify it. In MAX, I see "manufacturer Unknow Unknow model".

  I already installed the NI VISA full 5.0.1 pack and use the driver VISA Wizard.

  What can I do?

  Thank you

  François

  Hello

  I have already installed it. I have please contact Support, and they found that my problem comes from seven. I got a way to uninstall the old drivers on Windows 7 and now it's OK.

  Thank you

• USB-232/2 shows the COM ports but not found resources VISA!

  Hello

  I use an NI USB-232/2 interface to connect my OMEGA Engineering temperature controller to computer. The thermostat communicates with the computer via hypertermianl and the configuration of the OMEGA software, but can not be detected by OR MAX I've attached a screenshot of my MAX of NOR. I could see the two COM ports, but I can't see the VISA test Panel.

  My problem is similar to the post problem OR USB-232! I tried the solution for uninstall and reinstall NI VISA both NI Serial, but still does not.

  OR Labview 2009

  OR MAX 5.6.0

  NEITHER version 4.0 Serial

  Version NOR VISA 5.4.1

  Temperature controller: Omega Engineering CNi1644-c24

  Spoke engineering application NOR two days, no solution. Can anyone help? Thank you!!!

  

  
  

• NEITHER USB-232 problem!

  Hello

  I got the cable OR USB-232, as I'm trying to connect my minolta LS100 luminance meter using labview. Before I'm even worried about the VI I created for this, I can't see the NI USB - 232 in the "name of resource VISA" based series write & read vi. I have correctly installed the driver for the cable and the driver is up to date, also I see port (COM4) Device Manager and I can see the cable max.

  Any idea why I can't see it?

  
  

• With LabVIEW how to control an instrument with a RS232 output, using a USB RS232 converter cable.

  With LabVIEW how to control an instrument with a RS232 output, using a USB RS232 converter cable, since I do not have rs232 ports. I have two instruments I want for the control in this way. One is a guarantee of strength Imada SPAS with RS232 output. The other is a micrometer Panasonic HL-G103-S-J laser sensor which is RS422. I have done significant programming LabVIEW using GPIB, but I have no experience with devices such as these. No matter what tutorial or examples would be greatly appreciated.

  Thank you.

  When you plug the USB-RS-232 converter, it installs a driver under Windows which makes it look like any other RS-232 port.  You may need to install the driver of everything that came on the CD with the converter.  It will get a Com as Com5 port number according to what is the next available number.

• Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  N ° you need a computer logic board which has built in Thunderbolt.

• Can I use a USB on an iPad Pro?

  I am looking for an iPad 12.9 pro with a memory of 128 GB. Also obtain loghning usb and keyboard. My question is this: can I use a USB stick with this for transfer autour files?

  For example: I'm starting a word on a desktop document, except at thumb drive and want to continue to work with the iPad Pro. Can I transfer the file to the iPad to change, resave the said folder and then go back on the desk with her?

  Could also transfer other files with this set autour upward?

  I need solutions for mobility and stationery and was looking to use it for small, things go, then an iMac for the intensive stuff.

  My idea would work out?  Thank you for your time and your help.

  You can use the portable hard drives Seagate/Western Digital Wireless

  OR

  These are your only alternatives for of SanDisk USB flash drives.

  https://www.SanDisk.com/home/mobile-device-storage/ixpand

  https://www.SanDisk.com/home/mobile-device-storage/connect-wireless-stick

  Good luck!

• Xcdt satellite 2540 - USB port to use a USB key?

  Hello... I would like to give my old Tohsiba (Satellite 2540XCDT) my aunt to use either a connection dial-up / ADSL / ADSL2.

  It has a USB port - this port can be enabled to take a USB? Download a driver for it? Where can I find a driver for this system?

  (Recently I hooked a new Lexmark printer into the USB port and managed to get the printer doesn't work after loading software CD - a little slower than the old connection with the HP Inkject printer, but works nevertheless.) .... Made me think that maybe I could get a memory stick for this?

  Also... Any chance I can still switch from Windows 98 to Windows 2000 online? And it would help at all with performance improvement? Or cause complications more?

  And... ADSL or ADSL2 will be better than just using a slow dial-up? (or is this old system quite simply too slow anyway?)

  ... It used to work fine on just dial-up, although the memory buffer (or course) on video content - and I always think that one probably even with ADSL/2?) ... But things have changed there! (my new Toshiba Satellite XP a is zero, so I don't know how this old system would work these days?) Any comments?

  Hello

  > It has a USB port - this port can be enabled to take a USB? Download a driver for it? Where can I find a driver for this system?

  Looks like you are using Win 98 OS is usually very old new Microsoft operating systems; Windows Me, 2000, XP and Vista include the Generic USB drivers and it is not necessary to install any USB drivers but more old OS like Win 95 or 98 needs USB drivers Win

  See this page:
  http://www.technical-assistance.co.UK/KB/usbmsd98.php

  You would be able to download the USB drivers to use the USB flash memory.

  > Any chance I can still switch from Windows 98 to Windows 2000 online
  No, I don't think this is possible if you want to use W2K then you need to purchase this OS, but since it is an old OS I doubt you could buy this OS.

• Is it possible to use the USB modem on the Toshiba AT100 Tablet?

  Hi all!

  I just bought a Toshiba Tablet and I was wondering if it is possible that the Tablet could use a usb modem. My USB modem lights to say its connected but can not find where he recorded as an option.

  Concerning

  Pictonite,
  Tablet of Noob.

  Hello

  > that the Tablet could use a usb modem

  Found this info on some Android Web pages:

  + Unfortunately, you can t taken modem 3G into the USB there aren't currently has no drivers available. Maybe later on the track Google will add support for the mobile dongle in its Tablet OS, but for now, you got to jump on WiFi or a mobile wireless access point to get the online AT100 +

• Equim A60 unable to use TV USB 2 card

  Hello
  I bought a new equim A60 with the following specifications:
  Processor speed: 2.8 GHZ
  RAM: 512 MB
  Hard drive: 40 GB
  I tried to use the MSI VOX TV USB2 card and Terratec TV card on the laptop, but all do not work with my laptop even though he has worked with other laptops and my desktop PC.
  I tried the same cards with my own friends who is also Equim A60 and don't worry too much. I upgraded my bios but always the same story. Can anyone help me or this type of computers is not intended to be used with USB 2 Tv cards?

  Hi, when you say not working does not that mean that Windows does not have
  detect the USB device as a new device?
  Try all 3 USB ports if nothing happens take a look at the device
  responsible for the yellow markers. Also if you have another USB
  connected devices remove them also.

  Richard S.

• Satellite Pro M70: disable the touchpad when you use a USB wireless mouse

  I want to disable the touchpad when you use a USB wireless mouse. Can someone tell me how to do what you please?

  Hello

  Open the control panel-> mouse. There should be an option to disable the touchpad.

  Good bye

• Using a usb to hdmi cable can I connect my TouchSmart 600 computer to my TV without damaging my PC?

  Using a usb to hdmi cable can I connect my TouchSmart 600 computer to my TV without damaging my PC?

  Suzanne,

  With the help of a video-to-USB device like the EVGA UV plus + 19 will not damage your computer or HDTV. The EVGA UV + 19 more is an active device and is not just a passive cable. To the best of my knowledge, there is no passive cable which will convert the USB ports in HDMI ports.

  Frank

• Satellite P300-150 - cannot use a USB

  Hello

  I have a satellite p300-150 with Windows XP PRO SP2 and I can't use any USB key (I can't open) but I can use e.g. USB mouse.

  Thank you
  Fotis

  Hello!

  You can format the USB on the laptop, and you can see it in disk management?
  Do you have the yellow marks in Device Manager?

  This shouldn't be a problem with the USB ports, I think that the USB have some errors.

  Good bye