Xcdt satellite 2540 - USB port to use a USB key?

Similar Questions

• Satellite C660 - USB keys are not mounted

  I have a * Satellite C660 with Windows 7 64 bit *. When I conect a USB stick (2 GB LG or other), Windows install the new USB, but after a few seconds, the USB is disassemble and assemble and disassemble some indefinitely.

  With my old * Toshiba Satellite M50, Windows XP * both sticks work very well.

  Hi mkobets,

  Probably something wrong with USB ports or driver chipset so the glue work with your old Toshiba laptop USB

  Means the simplest would update the chipset in my view driver that you can download here:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Satellite A200 USB key recovery system

  Hi all

  I have a laptop A200-1 body weight, the problem is that the CD/DVD is not working. I have all the recovery 3 CD for Windows Vista (Ultimate) provided by Toshiba, but I can't restore my system. Is it possible to copy the recovery on USB CD and then run the system for windows vista (ultimate) recovery.

  Kind regards
  Asad

  Hello

  I've never tried, but I found this thread:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=228171

  Select this check box. It may be useful

  Alternatively, you can try to install the new copy of the Windows operating system using the USB.
  There are a lot of instructions how to do this with Win 7. Just google it
  After installation of cool Win 7 you could install the drivers of page European driver Toshiba.

• Satellite A200-14F: BSOD when using the FN keys

  Hey all and its not so mind my English.

  OK, I have problem with my laptop its Satellite A200-14F and when I press the FN button for toshiba flash cards, he appears just BLUE screen and it stops my computer!

  ANY HELP IS WELCOME. !!!
  Thanks in advance.
  P.S. I have instaled the new aded value pack and cards flash driver (thast at the start of all the problems)

  Great!

• Satellite Pro M70 freezes everytime when the USB port is used

  Satellite Pro M70 (SPM76) crashes every time when the USB port is used.
  The mouse works, but external HD/Extarnal card sound/Memory stick causing the laptop to freeze. All the drivers are installed right, they are the most recent and have no trouble with other users.

  The devices are all compatible. Service pack 2 is installed, and all the hardware drivers on the toshiba have been updated... again, same problem.
  The toshiba is about 2 months old and have had this problem since I got it. First I thought it was the drvers, but I cleared of all (?) other options but the USB ports.

  Hello

  Believe me, that's not easy to say what the problem may be. It is important to see if the problem occurs because of hardware or software may be. I recommend you to backup all your data and reinstall the unit using rescue media. On this way the unit will be factory settings and will be clean preinstalled. Test your USB devices and see what happens.

  Try to use some standard like USB stick or external HARD disk parts, because in this case, you must not install any drivers please. If you use other devices like USB webcam with own software and drivers, it is possible that something goes wrong, but what. On this path, it is not possible to say.

• After the BIOS update can not startup Satellite C640 using USB key

  After upgrading my bios Toshiba Satellite C640-10F (PSC02E) to WIN 2.00, I can't boot the laptop using USB key, when I checked the BIOS with F2, I was stunned because the USB port connected to the laptop has been labeled as FLOPPY drive. Y at - there no possibility to downgrade the BIOS?

  Thank you

  Stand by.
  Set the BIOS to default and after restarting, use F12 to get into the boot menu.
  USB option is available there?
  What is saved on your USB device? I mean why do you want to use device USB to boot from it?

• Satellite A300 - USB ports stopped recognizing USB devices

  Hi Toshiba users.

  I have a Satellite A300 for 6 months and the USB ports sopped recognizing such as usb key usb devices, mouse... How can I fix this problem or what drivers to download?

  Thank you!

  Hello

  USB controller drivers are responsible for these functions. These drivers are part of the chipset drivers. Try to reinstall/upgrade to update chipset utility. You can get it from the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

• No matter which usb port I use for a usb hub

  I have a compac presario CQ60-215DX notebook and I want to install a usb hub. No matter which usb port I use? would also like to know if it is necessary to remove it to restart my computer"

  Thanks for any help.

  Karen

  The only time you usually get trouble with USB ports is when you mix both USB 3.0 and USB 2.0 devices.

  • For all USB 3.0 is backward compatible, it is simply not the case that all the older devices are USB 3.0 compatible.  If you have a problem with an older device, consider that it may be because it is plugged into a USB 3.0 hub / port.
  • Not all hubs are created equal.  If you try to run some devices high speed (things you plug a hub) on a lower speed (2.0) turntable, they may lose the integrity of the data (Act funny) or refuse to perform certain tasks (depending on the device).  These devices may work best when it is plugged directly into the computer no matter that they are running as the USB 3.0 or USB 2.0.  It is not, therefore, necessarily what port the hub is connected - rather, it could be the hub itself (if you have problems).

  Peripheral USB could better with a reboot - some may not reset at all without rebooting.  A USB hub, one of the simplest types - these are usually plug-and-play.  That's all that is connected to the hub, which could be the determining factor for the restart.  It's Windows - it is always better to restart when things change.

• USB to serial port, Com port to use.

  I have Windows 7 64 bit Ultimate, evga 58 MB Intel i7 950 3.06 GHz, 6 GB ram, many locations for usb. I have a weather station "Oregon Scientific WMR968, I plugged my XP PC via a"usb to serial"cable, it worked well, giving me a com port to use for the software, but it does not work with Windows 7. It installs an input usb device, under the label HID, but not a COM port I have tried many drivers, but she finished in the same way, "peripheral usb entry" NOT a COM port I have tried to install .inf and who does not work either. I tried to update driver, and then point to the .inf and still no good. How to do this job, please. ?
  Frustrated,
  Robert

  Hi Androman,

  First of all I suggest you to check if the Oregon Scientific WMR968 is compatible with windows 7 or not.

  Check out the link given below to the windows Compatibility Center 7.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  If it is not compatible with Windows 7, then install the drivers in XP sp2 compatibility mode and also to contact the manufacturer for drivers that are updated that are compatible with windows 7.

  Select the option for windows XP sp2 and install the drivers.

  For more information, visit the link given below:
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Re: My Satellite L350 does not recognize USB key

  I have a Toshiba Satellite L350-235. It suddenly stopped recognizing my usb key that I use every day. Normally, he would say "new hardware found" and allow me to click on the F drive, now I get nothing!

  Can someone advise me?

  I guess that the USB ports are working properly if you connect another device; something like USB mouse. Right?

  In my opinion, you should test the USB in USB ports.
  You can also try to remove the USB controllers and hubs from the Device Manager list.
  After restarting of new laptop, (ports) USB controllers must be recognized, and then you could connect and test the USB again.

  In the event that the USB is not recognized by one of the available USB ports, try to connect to another USB key.

• Cannot sync. -Com port in use error

  Win7 64 bit, PalmDesk 6.6.6, IR USB dongle. Tungsten E

  Has been able to synchronize the first two times with the new IR USB organization. I ended with triple calendar entries so finally was able to remove old items out of PalmDesk and after doing a hard reset on PDA, could clean the scheduling issues so I thought everything was OK.

  Then tried another HotSync and kept getting an error on the PDA "Cannot start the HotSync operation because the port is currently in use by another application"

  Spent 2-3 hours to get here and other sites for possible solutions. Found none so tried to Soft Reset and then reset hot but neither worked. Finally I did a Hard Reset.

  Was able to do a HotSync.  It took 6:30, but it does not seem complete.  Note that my memory is only half full

  Now, the real problem.  I wanted to see if I could do a HotSync and did not take hours to complete.  But still, I get the port in use message.

  The message comes even if the PDA is not connected to the PC by IR isn't something in the PDA.  He was going to install dbFix, but since I can't synchronize I can't install it.

  I note that after the Hard Reset did only 3 options under connections now, I have 6. There is an IR to a PC/handheld, but the details show that it uses really Cradel/cable. There is an infrared for GSM phone but I can not remove or change it. Also of IR to PC with a speed of 28.8 by default.

  Solutions, ideas or even wild guess appreciated.

  WyreNut

  Thanks for the reply, but you are not the first to suggest not correctly the problem was in the PC.

  I have finally resolved and am posting the investigation and the resolution here in the hope that others can solve the problems of strange synchronization they could find out by doing a similar detailed investigation.

  The error message not being able to sync because the com port has been used pop up would immediately after recording HotSync. I without having to be connected or even close to a PC to get this error message. I have confirmed that being in front of PC with IR, equipped of Vista 32 bit, so it wasn't a problem with Win 7 64 bit either as I had been able to synchronize PC Win 7 approximately 4 weeks earlier.

  I had 4 chat sessions with Palm TREES, where they provided a number of suggestions essentially to tell me that the problem was Win 7 based or 64 - bit based or that I did a Hard Reset if fixed (none of which were correct).

  I tried a number of sweet, hot and hard resets. The only time wherever I could sync was after doing a Hard Reset and synchronization takes then 3.5 HOURS to complete. I could never do a second Hot Sync that I always get the error message.

  I finally discovered that the list of connections is changing and the individual setting for one of the original connections was changed when I did the sync.

  After a Hard Reset, there are three connection options:

  PC Via cable/home station, Modem Via station home/cable and IR for PC/handheld Via infrared

  When I ran the Hot Sync more than two connections have been added to the list

  IR for GSM and GSM BUT phone serial

  The surprise that took a few moments to discover that the PC/handheld Via IR computer had its details changed to home/IR obviously cable station, I could use this connection to synchronize this is to create a custom connection which was the PC Via IR.

  The dropdown under HotSync would present the old PC/Pocket PC Via IR, but it does not work because he didn't was more IR I would choose the custom, but he made the mistake of com Port conflict

  The SOLUTION was to delete all backup and archiving files, install the PC off, do a Hard Reset of the PDA and then do a HotSync.

  This time sync took only 5 minutes, the connection list has not been changed and the settings in detail for PC/handheld Via IR were not changed.

  I don't know when the commands of GSM phone has been added to the list of options on the PDA, I never used the PDA as a phone. I'm not even sure who's App adding the GSM phone files. He could have been there for years I never had problems with synchronization with USB port and a XP machine. Even the first synchronization IR on Win7 64 bit machine worked so I thought everything was OK.

  Thanks for the suggestion anyway.

• Satellite S50T-B - port HDMI questions

  Hi all...

  I hope you can help. I bought my new Satellite October last year and the first day I've known connection of an additional monitor problems. Initially I had an old monitor with a VGA connection, and of course this computer has only HDMI.

  So I bought an adapter, which did not work. I tried to connect my computer to the tv with the HDMI cable screen to test it, but it still doesn't work. It is still under warranty, so I sent it to the service of Toshiba, which couldn't find anything wrong with it and returned it to me.

  So I bought a new monitor (a BenQ) and a new HDMI cable. Indeed for some reason any he has worked for a couple of months.and isn't now. The computer does not detect the monitor and the monitor says there is no cable connected when I attach it to the computer.

  I tried everything and it drives me crazy.

  Hello

  The VGA-HDMI adapter will not work because HDMI provides digital signals and VGA (RGB) port supports analog signal. You cannot mix the two!

  In any case, go back to your HDMI problem.
  Please try this workaround:
  First of all go to BIOS (F2) and put back the default BIOS settings (F9) and save the changes (F10).
  Now connect the laptop and the TV with an HDMI cable. The two units must be OFF when connecting.
  Then turn on the monitor and then the laptop.

  AFAIK, you must use the function key: FN + F4 to switch to a display external or internal.

  Please check this!

• Satellite A500 - USB devices not detected

  I have a Toshiba Satellite A500 with a port USB 4 (Intel (r) 5 Series 4 Port SATA AHCI Controller. When I plug a usb key or a HDD on it, nothing happens. I checked the USB port driver. It is ok. Can someone help me solve this problem?

  Windows 7, 64 bit.

  Great job, mate :)

  Thank you for your comments! You re welcome in the forum!

• Satellite 2540 CDS, boot problem

  Hello
  I have a satellite 2540 CD and when I turn on the hard drive does not start. He made a little sound like it wants to start but then kind of stops. I have the power led, HD light, seeing the battery. The light on the drive is also on. I tried the reset button but nothing changes. The HD is fine and the power is very good. Is there a combination of magic button to turn it on? Help, please

  Hello

  As much as I know there is no magic button, but sometimes, it will be very useful to have a. Am I wrong?

  In my opinion, you should try to enter the BIOS settings. Check if the HARD drive is recognized correctly. Alternatively, you can try to start the device using the departure of dick. Check if you can change to C:\ A:\ and verify if the contents of the HARD disk will be displayed correctly.

  Good bye

• C870-191 satellite - how to start on a CD or a USB key?

  Hello!

  I would like to know how to boot from a CD or a USB key.
  My computer is a Toshiba laptop Satellite C870-191.
  I saved a new order of starting on the BIOS screen, but it does not work as expected.
  Your sincerely,.
  J.M.O.

  When you start your laptop press F12 repeatedly to enter the boot menu. There, you can choose which device should be used as first boot device.

  Check it out.