Using smart Windows Server with Perc 6i

Similar Questions

• A Windows Server with direct access to a VMFS LUNS can climb the PowerCLI help?

  Hello

  I wonder... a Windows Server that has a direct access to VMFS SAN LUN cannot mount this partition using PowerCLI?

  Has anyone tried this before?

  Thank you

  -virtualhobbit

  No, that goes up the data store you specify (MyDS in the example, but you change this name).

  But the copy of a large VMDK on that provider is not a good idea.

  As you run the script on your PC, it will go on the network.

  As long as you have no functionality to copy at the end, an alternative is to copy the VMDK from the console with the ESXi vmkfstools command.

  See KB1027876.

  The problem is that you must be able to mount the destination locally on the node of ESXi to avoid going on the network.

• Can I use in Windows Server 2008 PowerPath and Navisphere Server utility?

  Hi all

  We have Windows 2003 Cluster and use the utility Server (Version 6.20.2.0.0) Navisphere and PowerPath (Version 4.5.0.132).

  We intend to install a Windows 2008 cluster (Windows Server 2008 Enterprise 32-bit Edition), can I use the PowerPath and Navisphere Server utility in the new cluster?

  Thank you

  
  

• WIndows Server with multiple IP addresses in different VLANS

  What I'm trying to achieve: -.

  A Server Windows 2008 R2 Virtual machine with of 6 vNIC each with an IP different address of VLAN different & connected to the corresponding ports on VIRTUAL LAN group.

  Now how to make sure that traffic is properly flowing as traffic for VLAN specific are coming and get out of that vnic so that it can flow through port designated group

  As a single gateway can be mentioned, I guess we need to add static routes for that to work, but if it's static routes, then please explain to me how these roads will need to be added for each IP address.

  Or if there is another way to make her even if you please let me know.

  
  

  Thanks in advance...
  

  
  

  I was wondering what I really need to add roads since I am not asking that two different VLAN is talking to each other. Guess that's when I need the static routes.

  I guess in this case if I have 3 NIC with 3 different IP addresses would not be the traffic corresponding VLAN will come automatically the corresponding card.

  That would not be in the range 1.2.3.x traffic flows automatically NIC1 & 5.6.7.x runs automatically NIC2 & etc.?

• Non-visible images by using a local server with XAMPP

  Hello

  I resurrected an old project, who has worked in the past.  Since then, Ive updated Windows (8.1) and Dreamweaver (CC) today I installed the latest XAMPP and created a folder named xamp2015.  I copied the old project (mysite) in the htdocs directory

  Now, the logic of the site works, BUT the images do not appear.

  They are stored here C:\xampp2015\htdocs\MySite\Images\Main

  My Site Local folder is C:\xampp2015\htdocs\Mysite

  Default Images folder is C:\xampp2015\htdocs\MySite\Images\

  The images will be displayed if I move them to c:\xampp2015\htdocs\MySite and update the links, but it could lead to a messy structure, which was not needed previously

  Does anyone have any suggestions?

  Try to create a new subfolder called "bob" and put a picture in it, link to it on one of your pages and see if it happens.

  In addition, which is up to the .htaccess file in your pictures folder?

• Driver problem: Windows Server 2008 R2 on server T110 II with PERC S300 (RAID10)

  I have the Dell PowerEdge T110 II server with PERC S300 RAID card.  I installed 4 hard drives & them set on RAID10 in initial configuration.  The card mother recognizes the PCI-E card, which in turn recognizes readers.

  I pop in the Windows Server 2008 R2 DVD and I start from DVD, but when I get to the part where I have to choose a file location, it appears that he is not a player available.  There is another option to add a driver.  Then I went on the site ( http://tinyurl.com/PercS300driver) downloaded appropriate driver, added to USB & when I get to this screen, I'm trying to add the driver.  However, he said "there is no signed in this folder drivers."

  Does anyone know what I might be missing?

  You are using the wrong driver.  The one you linked to says it's for Server 2008 x 86.  As 2008 R2 64-bit only, there is no way it will work.  Use this driver for 2008 R2 (you must change the drop down menu on site driver downloads / to the correct operating system):

  www.dell.com/.../DriverDetails

  Be sure to run first to extract it, and then put the contents extracted on your CD/DVD/USB for use with the link to load a driver.

• Activation of Windows Server 2008 by using the button R2

  I can't activate Windows Server 2008 using the originally shipped with the X 3650 M3 server activation key. The media are labbled than Windows Server 2008 R2. Is that the key to R2 cannot be used for windows Server 2008 32-bit. I appreciate your response. Thank you

  You will need to contact your business partner where the system was purchased to to solve this problem.

• services licensing Terminal Server in windows 2008 can be used on windows 2008 r2

  I bought windows 2008 standard terminal service license (unit 5) a few years ago. I wonder if I reinstall the server with windows 2008 r2 foundation, I will be able to use/install the same license key?

  I bought windows 2008 standard terminal service license (unit 5) a few years ago. I wonder if I reinstall the server with windows 2008 r2 foundation, I will be able to use/install the same license key?

  'CAL FAQ
  Q: can customers use a Windows Server 2008 CAL to access a license for Windows Server 2008 R2?
  A: Yes. A CAL, Windows Server 2008 can be used to access Windows Server 2008 R2. »

  page 13 of the pdf
  http://download.Microsoft.com/download/0/D/9/0D9DDF52-A855-487B-9B74-5A09A9389551/Windows%20Server%20system%20Center%20and%20Forefront%20Pricing%20and%20Licensing%20Guide.PDF
  If you need additional details post under http://social.technet.microsoft.com/Forums/windowsserver/en-US/home

  It is dedicated to server stuff

• Performance issues with Windows Server 2008 host

  Hi all

  If I use a Windows Server 2008 host on my ESXi 4 installation.  I've recently upgraded to version 4 and had previously experienced similar problems and 3.5.  I also improved the hardware in the virtual computer to version 7 on all my guest OS.  The host in question is a file server.  Essentially what happens is sometimes that if a user opens a document (for most of the audio and/or video documents), the media file will take a minute or two to load then jump during playback.  If it's something like a file PDF/Word/Excel, the respective program crashes when the file loads or changes are saved, taking about a minute to respond to the user to enter again.  This problem is also very sparadic.  I even had this problem occurs when I'm the only user accessing the file server.  The specification of my VMware host is 3.2 GHz Xeon dual processor and 7 GB of RAM.  Two data warehouses are hosted on internal SATA hard drives.  ESXi is on the build 219382.  VMware tools is installed and update on all guest OS so far.  With regard to the use of the resources on the computer host, the memory usage with all my virtual machines running is almost always around 5.2 GB on the 7 available and the CPU usage is usually around 2 GHz.

  Looking at the logs performance monitor, I noticed an increase in the use of the disc during the shutdowns.  Are there utilities built to test the internal hard drives to find errors?  If this isn't the case, anyone recommend a utility that I can use to do this?

  Other ideas are also welcome.

  As mentioned disk SATA performance is less than ideal, or even acceptable by many people. The SATA drives in a configuration having non-RAID which makes it doubly Yes. If they were at least in a RAID 0, 0 + 1 or 5 configuration you would have best performance among readers (would be loath to 0 though, since there is no parity involved).

  Using the means on board mode SATA drive controller (or not RAID) of the SATA it runs the performance as low as possible.

  I wouldn't have even thought to have a server, or a system, used as a server that does not use RAID functions at least for redundancy. Couple that with discs that aren't going to cause bottlenecks as a standard too. Who used to refer to SCSI drives high speed, but also means using SAS drives these days (since they are replacing older parallel SCSI drives). The most difficult configurations for ESX, are performed on the server class hardware, which has access to a shared storage (which is high performance) on a fast network (Go to our days, or fiber) or a RAID array internally, which will not cause performance problems.

  You can try setting the server configuration, you have now, but that will only take you so far. You will need to the major weak links in the system. A (a major) is the SATA storage as stand-alone drives. The other is a network of 100 MB, which isn't too bad, but is still a performance hit when you share all traffic with these two ports. Moving to a GB switch could help the part of the question, but you will still have to solve problems of disk performance. If there is a decent amount of shared storage attached network where you are, see if they can give you a reasonable amount for the servers you are running on the host computer. Of course, you'll want to also be on the fastest possible network/connection of this storage.

• Cannot import Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4.

  Hi team,

  I use VMware vCenter Converter Standalone to import certain Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4, using another Windows Server 2008 R2 as the machine Agent Converter. Well, the agent connects to the Windows VM source very well (I used the net use command to create a line of conduct...), perhaps no chance to connect to the computer target VMware ESxi 4 and make the converter doesn't work...

  Following is the error message:

  "Unable to connect to the host specified" from the converter agent machine. " It is perhaps because the host is not available on the network, there is a problem with the network configuration or management on this host services do not react. Check all components of converter to be able to connect.

  So, my question is; is it possible to create a work around (like the net use Windows command above) to make possible the connection of the converter Agent on Linux VMware ESXi 4 machine Windows machine, to directly import the virtual machines of Windows Hyper-V to Linux VMware?

  Thanks in advance,

  It's even easier than that

  Use this: http://www.winimage.com/

  Which will convert *.vhd *.vmdk, so you don't need to do all this... Of course, another way is to start the machines, leaving them on Hyper-V and go through the network and process virtual machine as physical machines and do a P2V on the network...

• Unable to use the service Windows Server 2012 EAP - MD5

  Hello

  I tried using MS Windows Server 2012 the authentication server installation, I turned on the NPS server, installation and set up roles. Then I followed https://support.microsoft.com/en-us/kb/922574 thread to add support of MD5 by default it is obsolete.

  Now I'm able to see the added registry entries and you can select the MD5 method, but I do not know where to give the password of the application. I added the InvodeUsername and the InvokePasswordDialog in regedit but its only gives me such an option to select the user name and password.

  I'm getting MD5 challenge sent by 2012 to the authenticator switch and finally Reject-request.

  Can you know me how to provide the password in 2012.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Problems with the files of FoxPro 2.6 in Windows Server 2008.

  Dear Manager:

  We have some files of FoXPro 2.6 for example "AddUser.DBF" file that can be read in Windows 2000 Server or Windows Server 2003 by a "Microsoft Visual FoxPro OLE DB provider", it can read the file "AddUser.DBF" by our ASP.NET 1.1 (Visual Stodio 2003) web application, no problem.

  We have been using MS Windows Server 2008 R2 now.  But when we installed "Microsoft Visual FoxPro OLE DB provider", he cannot read the file "AddUser.DBF" by our web application ASP.NET 1.1 (Visual Stodio 2003) on the MS Windows 2008 R2 environment.

  Do you have a solution to this issue?  You have another type of Microsoft Visual FoxPro OLE DB Provider for Windows 2008 R2 help?  Then it can read FoxPro example "AddUser.DBF" file?

  When you get a chance, please answer my question.

  JiXing (Peter) Wang | Database administrator, TetraTech AMT
  Direct line: 703-841-2239 | Main: 703-841-2684
  Fax: 703-465-9158
  E-mail address is removed from the privacy *.

  Hello PeterWang,

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Active directory Migration from Windows Server 2003 to Windows server 2012

  Hi all

  Currently, I use the windows Server 2003 R2 Enterprise SP2 with AD, DNS and DHCP server. I want migration of these services to new fresh Windows Server 2012 R2 Standard machine. I migrate to active directory after this statement: http://social.technet.microsoft.com/wiki/contents/articles/22249.migrate-active-directory-from-windows-server-2003-r2-to-windows-server-2012-r2.aspx, he gets with success, but the IP configuration on the source server not migrated to the destination server. So, all of you know that why the source server IP configuration cannot migrate to the destination server?

  Help please give me an advice.

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• wbengine.exe process back up Windows server crash

  Hi all

  I have a real scarecrow if anyone can help with the below.

  I have a windows 2008 R2 server and I'm in windows server backup to back up my exchange databases,

  as incremental backups about 4-5 gb nightly take 10-15 minutes to complete successfully.

  However I had two instances to find the volume is stuck at 1%.

  I tired to cancel this backup the right way by using the windows server backup console, but the screen cancel freezes and not finished I left the night before and always the same when I come back.

  so after killing the console of windows server backup process, I'm stuck with the wbengine process that prevents that a return ups taking place because she is already a running process.

  I tired to the next stop using cmd lines and block-level service to kill while he reports, he killed the process, it is still there and preventing return taking place, I found the only way to stop it is to bounce the server which is not an ideal solution, if one has information or ideas on how to avoid this in the future I would be grateful.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Random WSAECONNREFUSED on Windows Server 2012 / IIS 8.0

  At our hosting provider, we have a server running Windows Server with IIS 8.0 through VMWare 2012. It hosts several web applications. In addition, FTP is running on port 21 on FileZilla Server. Since last August, apparently at random, the server sometimes refuses the connection on port 80 and 443 (WSAECONNREFUSED). He never refuses the connection on port 21. To give an illustration of how randomly, it is: it's happened to every day this week, but it never happened two weeks before. We cannot find anything in the IIS logging. The only thing we can find is that when you connect via port 80 (or 443), even on the server itself on 127.0.0.1, it usually works very well but sometimes WSAECONNREFUSED begins to appear between successful connections. Both, we and our host so far haven't a clue what is the cause, but other than that he's a suspect that it happens on the ports used by IIS, but IIS or the Windows event log will never make anything. Our hosting provider is a clone of this server on which we have disabled most of the web applications. This clone has the same behavior, even at the same time. A third server, which is entirely new (and running Windows Server R2 2012) does not show this behavior. All three are on the same network. After two months of research we have not still find something. Pointers are truly appreciated, as these errors are a problem for ourselves and for our clients.

  Thank you.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum