Using the PV formula in numbers

Similar Questions

• Using the quick formula to update the pay_element_entry_values_f table

  Hi friends

  I have a requirement to substitute an input value of element with a value obtained from a quick formula.

  I know that formula quick results used to fill the table pay_run_results and pay_run_result_values.

  Is it possible that I can use the quick formula for updating the tables pay_element_entries_f and pay_element_entry_values_f

  Thank you

  Yes, you can do it.

  Just call a formula within your formula and in the service function, you can write the pl/sql code you want.

  So, you can use the input element in the pl/SQL API.

  Just note that even if the input values are updated that are not considered payroll (at the time of execution of the payroll)

  It would be only on the other (or additional payroll runs)

• Using the map generator house numbers

  Hello world!
  
  I use Oracle card Builder (ver. 11.1.1.0.0) in order to obtain the numbers of the houses along the streets, using 20% and 80% of offset along the axis of the street for the 'from' and 'to' numbering respectively and 20% and -20% of baseline shift of the axis Street for both sides of the street, respectively.
  
  My understanding up to now, I am able to do this by using the arrow on the Style Option of global line, where I have to choose a marker Style for which I would set the X and Y Offset settings in the Option Style of text marker, while the symbol of the marker would have an opacity of 0% , because I do not want any symbol drawn with my house numbers.
  
  Because I think it's a bit silly to use a Style of marker for this reason because of its offset options, is it possible to do the same thing using a text Style (where the offset options seem to be inactive)?
  
  Thanks in advance,
  Panagiotis
  
  PS: Sorry for cross validation with the space Forum - I think that this forum is more suited to my investigation.

  Good point, but for now the marker option is the way to do what you want.

• Using the MDX formula in the monetary Dimension

  I wrote the MDX formula for a dynamic member in the currency dimension. I want only that Member to calculate a value if the scenario is REAL. In other words, I want that the Member of the currency to return $MISSING if the user seeks to Calc this dynamic rate for a member forcast or budget.
  
  To do this, I used MDX with a qualifyier like this:
  
  When is ([SCENARIO]. CurrentMember, [ACTUAL])
  
  It works very well and when the scenario is real, it works perfectly. And once the BUDGET, the MP scenario returns $MISSING. Awesome!
  
  But when the scenario is planned, I get a result. I have concluded that it is because the forecast members also formulas MDX associated with them that populate certain periods with actuals. This surprised me, because I wasn't expecting values sitting in a forecasting scenario would be marked in a way that could identify as being the actual expenditure. But the MDX is see it this way and, therefore, he is fighting through the qualification 'When' statement above and calculate a monetary value for the actual periods sitting in the forecasting scenario.
  
  Anyone have any ideas on how to change the MDX formula on the Member of the currency so that it will ignore the ACTUAL data, sitting in no REAL scenarios - and give me a #MISSING? I wouldn't not rather the formula MDX sitting on members of scenario.

  I'd be surprised if it actually happens, it's what you described, but I guess you never know.
  Try to increase the resolution of your member order then it Calc after other formulas were evaluated. See what's happening.

• Remove the circles on a hypnotic spiral image using the algorithm/formula.

  

  Hello. I'm looking to make this less dense image. Is there a quick way, using the algorithm or tool neat, that I can accomplish this? It goes pretty deep. I would be the removal of methodological way to the center of the spiral out circles. Thank you!!!

  You can try a small circle drawn with dashes round and with a variable width, duplicated, scaling and rotation with the effect of the transformation.

  

• Formula using the following string...

  Hi all
  
  Given a set of strings that can is be parsed (see format below), possible to do a TWG
  a set of such strings - i.e. the chain may have the form (from
  another thread (pricing using the string formula)) the chain is a bulk
  dicount "record" for a product - product code not included for now.
  I want to use SQL exclusively, but am open to suggestions - examples
  using WITH are especially welcome - has spent time last night, a truck load
  rising WITH (of no use, it must be added ;))
  
  _100 (20) 90 (50) 80_ String format
  
  See the code below*-20 first purchased items cost 100,.
  the cost of the next 50 90 and all the foregoing is 80/unit.
  
  What I would like is to be able to build a 'table' that I can join real Oracle
  tables - imagine these "records" of the chain are coming thick and fast and for reasons x, y
  or z, prices can be written to a permanent table. A product code must be
  included, but I think fundamental analysis once did, adding such a code should not
  be a problem.
  
  So, if I have a set of these strings, how build a TWG?
  If it is the right approach.
  
  Any ideas, references, URL - be it, much appreciated.
  
  What would be really cool is if the code could take a product with an arbitrary
  number of discounts - 2, some 3 (that is, for example), 4... & c...
  
  TIA
  
  Paul...
  
  Code-Cerca Trova of another thread
  

  with t as(
    select '100(20)90(50)80' str from dual
  )
  select regexp_replace(regexp_substr(str,'\)\d*',1,2),'\)|\(','')from t  -- 80
  --select regexp_replace(regexp_substr(str,'\d*(\)|\()',1,1),'\)|\(','')from t  -- 100
  --select regexp_replace(regexp_substr(str,'\d*(\)|\()',1,2),'\)|\(','')from t  -- 20
  --select regexp_replace(regexp_substr(str,'\d*(\)|\()',1,3),'\)|\(','')from t  -- 90 
  --select regexp_replace(regexp_substr(str,'\d*(\)|\()',1,4),'\)|\(','')from t  -- 50

  My own efforts (did not know that Cerca Trova had done) - even if it's rubbish, at least
  I tried ;)
  

  WITH StrTab AS  -- *returns 100* = Price1
  (
    SELECT '100(20)90(50)80' iStr FROM Dual
  )
    SELECT(
            TO_NUMBER(SUBSTR(iStr, 1, INSTR(iStr, '(', 1, 1) -1))
          ) AS  "Price1" FROM StrTab;

  Below retrieves the number 20 - sample - allows to extract all the numbers

  SELECT -- *returns 20* = Quantity 1
  TO_NUMBER(
  SUBSTR('100(20)90(50)80', 
  (INSTR('100(20)90(50)80', '(', 1, 1) + 1) , 
  (INSTR('100(20)90(50)80', ')', 1, 1) - (INSTR('100(20)90(50)80', '(', 1, 1) + 1)))) 
  AS "Quantity1" FROM Dual;

  Published by: Paulie 9 may 2012 12:32
  
  Published by: Paulie 9 may 2012 12:36

  Hello

  Whenever you have a problem, please post a CREATE TABLE and INSERT statements for a small example of data like this:

  CREATE TABLE     table_x
  (      id     NUMBER (6)     PRIMARY KEY
  ,      txt     VARCHAR2 (30)
  )
  ;
  
  INSERT INTO table_x (id, txt) VALUES (0, NULL);
  INSERT INTO table_x (id, txt) VALUES (1, '75');
  INSERT INTO table_x (id, txt) VALUES (2, '100(10)80');
  INSERT INTO table_x (id, txt) VALUES (3, '100(20)90(50)80');
  COMMIT;
  

  In addition, to say what version of Oracle you are using. The query below work Oracle 10.1 and higher:

  WITH     cntr          AS
  (
       SELECT     LEVEL     AS n
       FROM     dual
       CONNECT BY     LEVEL     <= 5     -- worst case
  )
  ,     rates          AS
  (
       SELECT     x.id
       ,     x.txt
       ,     c.n
       ,     TO_NUMBER ( REGEXP_SUBSTR ( '0)' || x.txt
                                   , '[^()]+'
                                   , 1
                                   , (2 * c.n) - 1
                             )
                   )        AS start_qty
       ,     TO_NUMBER ( REGEXP_SUBSTR (  x.txt
                                   , '[^()]+'
                                   , 1
                                   , (2 * c.n) - 1
                             )
                   )        AS rate
       FROM     table_x        x
       JOIN     cntr        c  ON  c.n <= LENGTH (txt)
                                   + 1
                             - LENGTH (REPLACE (txt, '('))
  )
  SELECT       *
  FROM       rates
  ORDER BY  id
  ,            n
  ;
  

  Output:

  `       ID TXT                                     N  START_QTY       RATE
  ---------- ------------------------------ ---------- ---------- ----------
           1 75                                      1          0         75
           2 100(10)80                               1          0        100
           2 100(10)80                               2         10         80
           3 100(20)90(50)80                         1          0        100
           3 100(20)90(50)80                         2         20         90
           3 100(20)90(50)80                         3         50         80
  

  If you use the WITH clauses above in any question, you can use rates in table form in the following parts of the query.

  This assumes you know an upper limit for the number of items in the string. I took 5 different rates above, but you can easily change that to any fixed number. You can also derive the exact number of data themselves. I'll leave that as an exercise.

  You can use the analytical function of LEAD to add another column, end_qty, rates.

  Published by: Frank Kulash, 9 may 2012 10:24
  It also means that txt is well-formed. A space before or after the parentheses is probably correct, but in additional brackets, letters, several decimal places or sign in the same 'number' and things like that will cause all errors.

  START_QTY is a misleading name; I should have used something like LOW_QTY or PREV_QTY. In the example above, the row with id = 3 and start_qty = 20 applies in reality to the amount above 20, i.e. 21 to 50 inclusively (since 50 is START_QTY for this id).

• Calculation of frame rates of acquisition image using the 7 Format

  So I finally got my Basler firewire (IEE1394b) camera to capture images at his rate max (120 fps).

  But to do this, I need to use the '7' Format.... which is a bit confusing to me.  When I use the '7' Format, I can't specify the frame (frames per second) rate.  Apparently, you only specify the parameters (length, width, color / mono) of the image and the size of the packets and a few other things.

  So, how can I calculate speed?  I need to know exactly how much time elapses between each image.  And it must be constant.  I can't have a different frame rate.

  NEITHER told I can calculate the frame rate using this equation:

  

  That comes from this article.

  But I am skeptical because the article also says:

  Please note that the time to transfer an image is slightly faster than the time it takes to acquire an image.
  

  People out there can clarify this for me?  Is the frame rate constant?  And then I actually calculate when using size 7?

  The rate will be constant.  It won't change from image to image.  The difficult part is to find what it is.

  Basler camera manual will tell you how to calculate the frame rate.  There are three different calculations, and gives you the slower pace is one you use.  These calculations are accurate enough, I think.

  Another possibility is to measure the frame rate, but that requires several seconds (or minutes) for a measurement precise.  The simplest method is to start a life-long and save a frame in time at the beginning, wait several seconds (or minutes) and save the time of another framework.  Subtract the chassis numbers, subtract the time and divide to get the frame rate.  With a wait of several minutes, it's extremely accurate.  To get the acquisition time, read an image whose value "Next Image", then save the chassis number and read the msec timer immediately after reading.  Using a flat sequence structure is probably the best to ensure that everything happens in the desired order.  If you loop playback, you will see real cadence cadence converge slowly.  Stop it when it is pretty accurate.

  In a program I wrote, I controlled the pace by setting the shutter exposure time.  I used the derived formula of the Basler manual for cadence and reversed to calculate the shutter speed.  This only works if you have another way to adjust the brightness levels (opening, lighting, etc.).

  Bruce

• Cannot use the Windows Partition

  So, I have seen very similar messages and followed several forums, but I can't yet figure out what to do next.

  I have 8.1 Windows on my Mac.  I wanted to repartition the Windows partition and make bigger it because I was running low on space, and the Windows partition is what I use it mostly for graduate studies.  About a year ago, I took an easy youtube video and used Mini Wizard Partition re-partition space and it worked perfectly.  I have found the same video and tried to repartition the Windows partition again, but apparently I royally screwed up.

  My BootCamp is not yet visible more in disk utility.  Under the partitions, there is an option called "disk0s4" greyed, but I'm not allowed to do something with it.  I can't verify or repair.  If I go to Applications, BootCamp Assistant is there, but he wants me to start the installation of BootCamp.  It was not an option to restart Windows more, and when I turned on with alt + market, Windows was not an option more.

  I followed this tutorial:

  http://nerdr.com/bootcamp-partition-lost-repairing-Mac-partitions/

  and when I restarted my Mac, restart Windows was an option. So I thought that I fixed it! EVIL.  My screen was black and said: 'Missing Operating System '.

  I downloaded EaseUS Data Recovery Wizard for Mac (because it was another suggestion), and I was able to recover and see the files on the NTFS disk0s4, so I'm quite positive, they have not all been completely erased.  Or at least the part of basic Windows is still there.  I can't recover the drive to anything, because it tells me that I will just be fitness on the same drive, and I honestly don't know how to retrieve these files will help with the side of the partition of things.

  I also used TestDisk and it seemed to find my missing partition, but in the middle of analysing it, it says something like "disk too small."  After further research, I went through and took only the most recent score that seemed to be deleted with NTFS, and when you are trying to do, it would allow me to make a 'logic' partition because he said something in red, as 'bad file.'

  My Mac still works perfectly, but I'm terribly need to recover my windows.

  Here are my findings from a similar position:

  Last login: Wed Mar 9 16:30:28 on ttys001

  Anna-Owenss-MacBook-Pro: ~ acowens1$ sudo gdisk/dev/rdisk0; "exit";

  GPT fdisk (gdisk) version 1.0.1

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  Scanning partition table:

  MBR: hybrid

  BSD: absent

  APM: absent

  TPG: present

  Found a valid GPT with hybrid MBR; using GPT.

  Command (? for help): p

  Disk/dev/rdisk0: 625142448 sectors, GiB 298,1

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: 0000429B-368F-0000-CB2D-000003440000

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 625142414

  The partitions will be aligned with the boundaries of sector 8

  Space free total is 277435021 areas (132,3 GiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 200.0 MiB EF00 EFI system partition

  2 409640 268314855 127.7 giB customer AF00

  3 268314856 269584391 619.9 MiB AB00 Recovery HD

  4 547018752 625141759 37.3 giB 0700 BOOTCAMP

  Command (? for help): r

  Recovery/processing command (? for help): o

  Size of the disk is 625142448 areas (298,1 GiB)

  MBR disk identifier: 0x0000711C

  MBR partitions:

  Code of State sector Boot start end sector number

  1 1 547018751 primary 0xEE

  2 * 547018752 625141759 0 x 07 elementary school

  Recovery/processing command (? for help): h

  CAVEAT! Hybrid MBRs are flaky and dangerous! If you decide to not use one,

  Simply press enter at the prompt below and your partition table MBR will be

  be intact.

  Type one to three GPT partition numbers, separated by spaces, to be

  added to the hybrid MBR, in order: 2 3 4

  Partition of EFI GPT (0xEE) place first in the MBR (good for GRUB)? (Y/N): y

  Create entry for the #2 GPT partition (partition MBR #2)

  Enter a hex code MBR (default AF): n

  Set the bootable flag? (Y/N): n

  Create entry for the #3 GPT partition (partition MBR #3)

  Enter a hex code MBR (default AB):

  Set the bootable flag? (Y/N): n

  Create entry for the #4 GPT partition (partition MBR #4)

  Enter a hex code MBR (default 07):

  Set the bootable flag? (Y/N): y

  Recovery/processing command (? for help): o

  Size of the disk is 625142448 areas (298,1 GiB)

  MBR disk identifier: 0x0000711C

  MBR partitions:

  Code of State sector Boot start end sector number

  1 1 409639 primary 0xEE

  2 409640 268314855 primary 0 x 01

  3 268314856 269584391 primary 0xAB

  4 * 547018752 625141759 0 x 07 elementary school

  Recovery/processing command (? for help):

  Now, my major dilemma is that in the original post, he said to the partition of the hybrids with the numbers of 3-4-5, but I was unable to do so.  When I tried 5, he said "partition does exist or is too large."  So I used the 2 3 4 numbers.  Now, I'm at the point where I use the w command (to write), but I don't want to do it if I didn't the other steps correctly.

  1 mini Partition tool is very dangerous and should never be used on a Mac, in particular, more than once.

  2. article NERDR is the most irresponsible article about these issues and causes and exacerbates still more data loss.

  3. Please do not rewrite the MBR/GPT with Gdisk.

  4. you must return to Testdisk. TestDisk is used only for scanning, not for the updates. All updates using Gdisk, not binding Testdisk, once the right partition headers have been found.

  5 Please after the release of

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

• I use the full version of DASYLab 8.0, how to add PID module in the design of the façade (window layout)? while I can vary the p, i, d values in the window layout

  I use the full version of DASYLab 8.0, how to add PID module in the design of the façade (window layout)? while I can vary the p, i, d values in the window layout

  To do that you will need to change the varibles PID values and then use the sliders to add numbers to a latch for variables that point.

  This is how I think it works in Version 8.

  In all cases, you should move on to 12 more stable summer.

  In addition, unless that is a very slow process, I generally do not like closed loop PID with DASYLab due to the fact that computers is not reliable with timing.

• FM 10 - How to set up the Roman numeral page numbers in the preface?

  I want to use the Roman numeral page numbers in the preface, but normal numbers in the document (not the book).  How can I set up a "first pages" section for the Roman numerals?  Using FM 10

  I master the basics of the (and more) of Adobe FM 10, by Janet Underwood, but don't find anything in there that helps.

  Yours, Earle Fox

  Do the preface of a separate in the book file. In the book window.

  Right click on the file of the preface and choose numbering. On the Page tab.

  First Page # 1 value and Format "Roman (xiv)." Click on define.

  If you after the chapters where you also want to use the Roman

  numbering, click 'continue Page numbering in previous book.

  button instead.

  To return to normal of the numbering, choose the first file and the value

  First Page # 1 and the Format to "Numeric" (14) Set the following to files

  'Continue the numbering from the previous Page in the book.'

  Parameter page numbers for the books in the book window usually gives better

  the results, but you can also configure it for each document, from the inside of the

  document. (Format > Document > numbering), then, using the book window

  dialing, assign each file read file in the tab of the page.

• Using the formula of numbers

  Hello.

  I seems to have hit a wall with a simple spreadsheet, I'm developing.

  I want to administer the spreadsheet on my mac, but I want to be able to edit the spreadsheet through my people, using ipads. I also want to synchronize the file to the cloud so all have an updated file to use. I'm testing number and Excel. Excel works fine but the numbers I think has a bug. I want to use the numbers for several reasons.

  I've attached a screenshot of a fake spreadsheet which basically highlights what I want to achieve below. The spreadsheet works fine in number for mac, but on the iPad, I have an annoying problem that it may take a more complex formula to make it work.

  Basically, this is how I want my spreadsheet to work:

  Cells C4 - C6 and D6 - D4 are the date cells through which we enter the date in and out. The column days Out (column E) subtracts basically two dates. The return last column (column F) subtracts the Date in the column (column D) with the date in H1. So, I want to be able to sort the F column in descending order (which is the most important function of the spreadsheet, numbers of thugs are so unwanted) the spreadsheet works fine on my desktop, but on my iPad numbers puts a large number of column F (usually 73000 + according to the effective date, see line 7 in the attached photo). Those big numbers seem to be the number of days since the year "0".

  

  Here are the formulas that I currently use:

  Column E: IF (OR(C6=0,D6=0), "", D6−C6)

  Column F: IF (OR (C6 = 0, D6 = 0),"", $H$ 1−D6 ")

  Column H: today()

  I used the function DateDiff but that does not work.

  Is this a bug? Or can I somehow generate a formula that will require to work?

  Fixing unfortunately it's become outside my experience base with spreadsheets.

  Hi Duke,

  Can't tell what's going on, but I get the correct results, recording the same formulas in column d a new document worksheet in numbers for iPad.

  Results in column D are the same as yours. Results in column E are one day less than yours for the first two items (it's always may 20 here) and d 187 to the third point.

  What is the (real, not "scheduled") formula in the iPad version F4?

  Kind regards

  Barry

• Using the function in Numbers ' 09

  I am trying to create a calendar in Numbers ' 09. My schedule has a number of steps that need to occur at specific intervals. For example, if the project starts at 09:00, the step 2a occur about 8 hours later. Step 3 should arrive 30 minutes after step 2. Stage 4 runs about 12 hours after step 3. Stage 5 runs about 4 hours after step 4. Is it possible to use the numbers to determine what time these steps should happen if I go to the time of departure?

  In Excel, I can use the TIME function. By example, if I enter 09:00 in cell A1, and then in cell A2, the formula = A1 + TIME (8,0,0), the result in cell A2 will be from 17:00. Then, I can enter in cell A3, the formula = A2 + TIME (0,30,0) and the result in cell A3 will be at 5:30. And so on.

  By the numbers, when I try to enter the same formula, I get the following error message: "the arguments of the formula may include a value date." Does this mean that many young people cannot do what I want to do here, or am I enter something wrong?

  Thanks in advance for your help.

  Sincerely,

  Mark

  Here are two ways (shown in the second column of formulas):

  

  Note that although the cells to appear in the column contains only times, they actually contain date and time strings and they are formatted to indicate the part time only.

  SG

• How to get the numbers to remember a list of answers column on nine or more tables using the same format

  I'm new to numbers but were mainly use it to organize only a simple way to display the cases that arise in a criminal background check. So for a table, I can type driving while license revoked (DWLR) as the load and from there on the charge will fill itself or offer similar responses after typing a single key.  A well appreciated time saver but problems I can sort and summarize the criminal history for 10 people or more at a time and need to do it urgently often.   However when I opened a new table I have to cross and type a new the precise wording of a charge, its disposal (Guilty, voluntary dismissal etc.)  and just know that there is an easy way for the numbers to know in a new table that, if finished it is a list annoyingly long term broken criminal code list and do not have to do that in each new table so that it can take.  I know I'm missing something very basic, but any help would save hours for me and the other poor interns who spend twice as long just to undestand the case and troubleshoot.  Thanks for all the ideas!

  David

  Hi D,

  The AutoComplete feature provides suggestions picked on data entered in the cells above the one you are working in. You can automate the process by preparing a "full menu" table containing ALL the possible inputs for each column in the rows below the header lines.

  

  The checkbox in cell A1 is a switch, is used to insert the word HIDE in the cell that contains the list of AutoComplete terms. Cells in this area are filled with bright red to draw attention to them when indicated.

  A rule to reorganize (shown and applied below) hiding these lines when the box is checked.

  

  Hide the lines does not affect the operation of auto-complete, as shown in the table below:

  

  When the form is competed, action depends on how the result will be recorded and filed.

  If there is no need to edit/modify the file, it can be converted to a PDF using the print dialog. This produces a copy of the displayed part of the document only.

  If the document will require more editing, you can remove the lines containing AutoComplete suggestions. Clear the check box, select all the red lines filled, click the triangle in the row reference tabs and choose Remove.

  Formula in A2 - A10: = IF(A$1,"HIDE","")

  Kind regards

  Barry

• Sorting table 2D using the formula node

  Hello

  • What l am trying to do is kind of numbers in groups.
  • A group consists of the numbers that are equal, or step upwards or downwards by a single value. Each group must be assigned to a column. E.g. O column of the table of entry test would consist of 5, 4 and 3, but not the 9 and 10. These values belong to column 1. However if the adjacent cell in the column was not empty then 9 and 10 would stay in column 0
  1. To better understand the programming formula node went to 1 d. I found that each cell is not treated individually with my code.
  • The final table of the orange entry test is that the data type l want to sort a 2D picture that ends up the same size chart.
  • In the code l provided my goal to compare each cell of each column line to determine if a cell is equal for example a = b, a + 1 = b or a-1 = b If Yes, then these values are in the right column. If this is not the case, a sort must be made to put a value in the right column it is.

  This is my first shot with node formula and l must admit others examples l found a bit confusing how a result has been obtained. I prefer to do any programming in labview instead of going to another program for results l am after. I tried to picture of programming just for this problem and found to grow big and very complicated then stopped l. For me the road to node formula should be simpler and more compact. My last resort is to use Excel but l still hope to do all the programming in Labview l you end up with a more dynamic program.

  Concerning

  Michael

  Hello

  You are brilliant... bloody!

  I just couldn't she would repeatedly using tables, l have been on it for weeks. I never thought about how you solved this problem.

  I hate excel and text. I am graphically spirit therefore l such as labview.

  I had a solution in Excel yesterday, but your solution is much better than what l came with

  I'm very grateful

  Thank you

  Michael

• Change the cell referenced in the formula of numbers

  I have a cell in the worksheet 2 (e.g. E1) I want to access a value contained in an adjacent cell (eg.  A1), then use this value to change the value of the cell that is in a cell in sheet 1,.

  The simple formula would be: = Sheet 1::Table 1::D3

  But I want the selected line in the D column is controlled by a value which will change.

  for example if it is a 3 in the cell, then it displays the value found in cell D3 in sheet 1.

  If it finds a 4, then it displays the value found in cell D4 of sheet 1,

  and so on.

  Hi Ron,

  I think you're looking INDEX(). Here is an example

  

  If your tables have unique names, you don't have to specify the sheet. I put the two tables on the same sheet for clarity.

  Quinn