UTL_TCP (mode of blocking or non-blocking sockets)

Similar Questions

• Sleep mode being blocked/prevented

  When I try to put my computer in mode 'sleep', I get a warning window saying basically "peripheral scanning WSD prevents the computer mode 'sleep'."  I checked for an update of device as suggested, no luck.  I even disabled the scanning device, but still will not enter sleep.

  Hello
   
  Try these steps and check the result.
  Step 1: Check the settings of the scanner device power management.
  1. click on start, type devmgmt.msc and press to enter.
  2. double-click the scanner device and click the power management tab.
  3. uncheck all options and apply the settings.
  4 restart the computer and try to put the computer in mode "Eve" and check the result.

  If the problem persists, try the following steps.
  Step 2: Stop the scanner service.
  1. Click Start, type services.msc and press to enter.
  2. from the list of objects, double-click scanner service.
  3. stop the service and apply the changes.
  4 put the computer on "standby" and check the result.
   
  Step 3: Disconnect the cable from the printer/scanner.
  1 shut down the computer.
  2. unplug the power cable from the printer/scanner.
  3. restart the computer.
  4 put the computer on "standby" and check the result.
   
  Step 4: Plug the cable from the printer and check the result.
  We also recommend that you install the latest service pack successfully. Visit this link for more information: http://support.microsoft.com/kb/935791
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Cannot go beyond the Office in standard mode, various scenarios of (non-performance issues) freezing. Safe MODE works very well.

  Cannot go beyond the office longer. Freezes clicking on dialog boxes does nothing most of the time. Clicking on some dialog boxes will close them but leave the box empty and completely white out. The icon on the taskbar is different than what is on the desktop. Everything works fine in safe mode. I have worked on this for almost 3 weeks and have been asking for help. One of my diagnostic checks give several (IRQ) has not been defined in time. (OFOO:0132 or OFOO:XXXX)

  Running Vista 32-bit Basic. Did a restore of the system (not a full reboot) and he made sure the cursor to move to the desktop (but no result has produced most of the time) Unlike before where the cursor was just immediately frozen.  Also received DST short Test failed and OFOO:065 D. error reading disk-DST self-test. Do not forget that in Safe Mode, I can do everything very well. It's the only way I can access the internet. If anyone can help me I'll always owe to your kindness.

  Hello

  OFOO:065 D. errors of disk-DST Self Test Read Error DST short Test failed normally mean hard.

  See you soon.

• Mode Setup silent vs. non-interactive

  Hello
  
  I am installing database Oracle 10.2 on Linux.
  What is the difference between interactive and silent installation? Is that only in non-ineractive type we have to define the program installation and the DISPLAY variable shows the screen? If so, what can be the reason for the use of this method - just to see the progress bar and the screens?
  
  Thanks in advance,
  Sousou

  Well, this is the main difference, but consider that many people feels easier to use a wizard that modify some files, like me. ;-)

  Enrique

• Y560P card number: sleep mode and headset to the connected socket

  I searched the forum as much as I could and did not find this issue to be considered.

  So, sometimes I listen to music with headphones or even after a Skype call, I leave the connected headphones. If I put the laptop to sleep and wake it back up, unplug the headphones will not return my sound setting to speakers; I can't hear any sound if I plug the headphones in the back.

  I tried to connect and the new: no change. I tried to disable and re-enable "Realtek High Definition Audio" in the Device Manager: no change. Uninstall and reinstall it wouldn't be a good solution if it had to be done all the time. The only thing that it returns to normal is turning works again... typical I.T. solution. Is there a driver update to solve this problem?

  Speaking of driver updates, I guess that I can't find any BIOS update or updates to driver for the ideaPad due to the recall of Sandy Bridge?

  UPDATE: sorry... found the lenovo support site area sub consumer that is different from the IBM one... Argh...

  judge that?

• Dell XPS 9550 blocked 8 CPU multiplier

  Hello

  I recently noticed that my new xps 15 9550 is really slow. So I downloaded CPU - Z for a deeper look. I found that the CPU multiplier is stuck at 8, regardless of how much I put on the CPU by running the stress as a prime64 stress test.

  Then I tried to SpeedStep disabled in BIOS and the problem remains.

  Now I have to use ThrottleStop 8.00 to force the multiplier to 26 to get get the normal performance. I had ThrottleStop to untick BD PROCHOT in order to force the multiplier. According to the ThrottleStop, BD PROCHOT is synonymous of Bi-Directional hot processor. This allows other elements report the CPU to tell him that the CPU is hot and should accelerate even when it is not. It could be the GPU or the power regulator when it's too hot or starts to put too much power that signals the CPU to Butterfly and to save energy and to cool down the overall temperature of the system.

  Is this a known issue? Y at - it a good solution rather than rely on ThrottleStop?

  = Attached CPU - Z report.

  Processor 1 ID = 0
  Number of hearts 4 (max 8)
  The number of threads 8 (max 16)
  Intel Core i7 6700HQ processor name
  Skylake code name
  Specification Intel (r) Core i7-6700HQ CPU @ 2.60 GHz
  Package (platform ID) 1440 Socket BGA (0x5)
  CPUID 6.E.3
  Extended CPUID 6.5E
  Core Stepping R0
  14 nm technology
  TDP limit 45.0 Watts
  TJMax 100.0 ° c.
  Basic speed 798,0 MHz
  Multiplier x Bus 8.0 x 99.8 MHz speed
  Stock frequency 2600 MHz
  Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, AES, AVX, AVX2, FMA3, VT - x, TSX
  Data L1 cache 4 x 32 KB, size 8-way line set associative, 64 bytes
  L1 instruction cache 4 x 32 KB 8-way line set associative, 64 byte size
  L2 cache 4 x 256 KB, size 4-way set associative line, 64 bytes
  6 MB L3 cache, size 12 channels line set associative, 64 bytes
  FID/VID control Yes

  Turbo Mode supported, enabled
  Max-non-Turbo ratio 26 x
  Max turbo ratio 35 x
  Rate of return max 8 x
  O/c stores no
  Report 1 Basic 35 x
  Ratio 2 cores x 33
  3 cores x 32 ratio
  Ratio 4 cores x 31
  TSC 2592,0 MHz
  TSC_24 24.0 MHz
  APERF 798,2 MHz
  MPERF 2594,0 MHz
  Voltage ECP Mode Adaptive AI
  AI voltage Offset 0 mV
  GT tension PKU Adaptive Mode
  GT voltage Offset 0 mV
  LLC/Ring voltage PKU Adaptive Mode
  0 mV LLC/ringtone Offset voltage
  Adaptive voltage ECP Mode agent
  Agent voltage Offset 0 mV

  Temperature 0 41 ° C (105 ° F) [0x3B] (Core #0)
  Temperature 1 43 ° C (109 ° F) 0 x [39] (package)
  Power supply 0 4.12 W (package)
  Power 1 1.90 W (IA hearts)
  Power 2 0.06 W (GT)
  3 power 2.15 W (Uncore)
  Power 4 1.28 W (DRAM)
  Voltage Volt 0 0.80 (VID)
  Voltage 1 + 0.00 Volts (AI Offset)
  Voltage 2 + 0.00 Volts (GT Offset)
  Voltage 3 + 0.00 Volts (Offset LLC/Ring)
  Voltage Volt 4 + 0.00 (System Officer Offset)

  For you, I have a workaround.

  You need to shut down the PC, then open the cover from the bottom to the top (unscrew the 10 screws torx t5 and 2 philips ph1 under the XPS plate) and disconnect the battery for 10-15 seconds, then reconnect it back.

  On my laptop it returned the speedstep return.

• View desktop computers is blocked

  Hi all

  I have a problem in my view environment. I hope someone can help me or give me a hint.

  • 1 x Windows 2008 R2 with vshpere 4.1 (full license) and View Composer 5
  • 6 x ESXi 4.1
  • 1 x Windows 2008 R2 with view connection Server 5 (until the end of December trial license)
  • 1 x pool ABC1, dedicated, linking clones, no allocation of user for the moment
  • 1 x pool ABC2, dedicated, linked clones, which is allotted 1 desktop computer

  Since a few days, I am not able to connect with View Client on my Win 7 Workstation physical to virtual desktops. View Client message: "access to this desktop computer is blocked. A few days ago I was able to connect all virtual workstations with View Client.

  Message on the event-DB:

  "Check failed" "connect to Server" "could not launch for user domain\username ABC1 pool: this pool of office does not allow for online sessions.»

  What I tried:

  -Pool unentitlement / right of users/groups

  -Pool enable / disable

  -RDP on successful, view Desktop Agent is installed

  -deleted all the powers of the user on the desktop

  -no tags assigned

  Does anyone have an idea what I can do to connect my desktop PC?

  Hi Toby,

  Global policies, check if your remote control is set to "allow". Although playing all about you would have changed 'decline' which in my opinion, is originally not connect for the desktop, but you can download and run it locally (View Client with Local Mode operation).

  or

  Your your user account which belonged to the small remote desktop users group is no longer part of the group which blocks access to remote desktop computer.

  Above are a few assumptions based on the current changes in administrator mode which blocks access to remote desktop computers. Soultion can vary more information on your side.

  Kind regards

  Pravin

• the container plugin crashes if the computer enters in standby mode or screen saver mode

  It seems every time I put my computer in "sleep" or mode if it passes mode screen saver container plugin crashes

  Update, it seems that if I leave a video or an open game so I have to leave or turn it into safe mode it blocks it

• d5200t (NE504AV-ABA): computer d5200t fails to ask if I want to start in safe mode but still starts in safe mode

  My computer HP (NE504AV-ABA) d5200t has problems starting.
  
  Whenever I try to restart it from a stop, it does not ask to restart
  Windows in safe mode, and it always starts in a variety of safe mode that blocks
  Use the Ethernet port or any other network devices.  This safe mode also blocks
  using the service Windows Installer 64 bit, so I can't install any program I
  wait for help with this.
  How can I do return to start Windows in normal mode, without losing the
  various files that I have accumulated over the years?
  This is my last computer 64-bit Windows Vista SP2 and has a program that I need
  that will not run on newer versions of Windows.  No installation package for
  This program is available.
  All my last 100 backups or while it is stored on a server HP disc that will be
  is no longer boot, so these backups are EXTREMELY difficult to achieve.

  This site does not allow copy / paste, so I had to insert the text file I had prepared as if it was the code.

  It didn't work - the safe mode was not checked.  What finally fixed MOST of this problem said the startup procedure to use the last known good configuration.  Then, it took about four Windows restarts and correct the time system, to complete the fix.

  During the problem computer is often not quite in safe mode, only confused as to whether she was in safe mode or not.  'Safe Mode' did not appear in the corners of the screen, but try installing the software gave error messages saying that the installation could not be done in mode safe.  Internet connections were usually blocked.  Switching to the alternative shell is cmd.exe, the only way to tell the computer what to do, and if there is a way back to the GUI, it was well hidden.

• Lost start menu / no. icons on bottom / cannot start in safe mode / can not use windows fix option

  After a restart of my computer I have more a start menu bar or icons on my background.  Things seem to work ok most of the time, but my pc hangs on the blue screen more than before.

  I tried to reset my computer to a previous point of reset but my help and support option does not work and when I use the option in the advanced start-up splash screen it appears that it nothing happens because I find myself with the same State of no start bar or the desktop icons.

  I also tried to start my computer in safe mode, but it hangs and never completes the operation.

  My computer came with an installation disk ever because he has been on a hidden HD (Dell 9200) partition but I can't access it because during startup, it hangs at the same place as my safe mode option blocks so I can't use the windows fix option.

  Can anyone think of anything I can do to fix this?  I got it to work by removing the file Explorer in my window of Task Manager running it again, but this seems to be a symptom of a larger problem because I get the blue screen.

  It is up to you and if you want to wait. You still need a hard disk physically viable well. Maybe you want to just wait and then break the RAID 0, treat readers as being separate and test with the diagnostic utility before installing Win7. You do a clean install anyway.

  I'm really happy with Win7. Just make sure you have the drivers for it. MS - MVP - Elephant Boy computers - don't panic!

• Maintenance mode vcenter 6 active cluster Ha

  Hello

  I have a cluster 6 version which consist of version 6 of 5 host, but when I put my hosts in Maintenance mode, it blocks just task to 2%, not had the license for DTH.

  My config HA is turn off: power of VM allow operations that violate constraints of availability.

  My vmotion works because if I move-vm by powercli, it works correctly.

  Why HA mode do not move vm other hosts

  Thank you

  To do this, you need DRS. HA will just restart VMs in case a physical host fails, but it won't live vMotion migrate virtual machines when you put a host into maintenance mode.

  You must manually migrate all the virtual machines in this host if you put it in maintenance mode.

• I need to remove "minimize, maximize, close" buttons on the mode full screen

  I can remove all the buttons (like refresh, back, forward, address bar, etc.), but the small right 3 "minimize, maximize, close" buttons I can't delete, how can I do it with userChrome.css or another option.
  Because I can close firefox out of the full screen and clicking on the menu of archive with the ' Alt ' key.
  I don't want this small 3 buttons, I can hide and show permanent.

  I hope to explain correctly
  Thank you very much

  Add code to userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  ---

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #autohide-context { display:none!important; } /* hide context menuitem "Exit Full Screen Mode" */
  #window-controls  { display:none!important; } /* hide window controls in full screen mode */
  

• Volume is available in safe mode

  I have a windows vista laptop, when I turn on safe mode, I can't get the volume to work, how do I fix (please use a simple language, technical terms just his Dutch for me)

  Hello

  In Safe Mode Windows load a minimum of drivers, like Safe Mode should be used to solve problems that occur in Normal mode.

  Thus, none; There is no Audio drivers / his support Mode safe to give volume.

  There is no 'solution' because the sound is not supposed to work in Mode without failure.

  See you soon.

• What is the mode of staging by default when it is: (not specified)?

  Hi all
  
  What is staging mode by default if none is specified?
  
  According to the docs, there are three: stage, any stage , and external stage
  
  http://docs.Oracle.com/CD/E17904_01/apirefs.1111/e13952/TaskHelp/deployment/SetAServerStagingMode.html
  
  Thank you very much.
  
  Under Weblogic 10.3.5.0 OEL.

  The default value, set in the fashion scene is different depending on the scenario.
  For example, if you are deploying to a single server domain (just the AdminServer), default time mode is 'nostage '.
  If you deploy a server managed running in PRODUCTION mode, the default mode is 'stage' {in most cases, the default time mode is 'stage'}

  Arun

• Live View PHP error: Live View cannot display non html files

  I use DW CS5.5 on Windows 7 64 bit.

  I get this error when I try to view any PHP file:

  Live View mode cannot view the non-html, pdf, doc or ppt files. As you can see, I try to view a php file.

  The second error in the list relates have troubled Donostiarra dynamically related files. "an unknown error has occurred."

  I can't find anything on the internet on this subject. Help, please.

  

  Here's an update:

  The problem was in the .htaccess file that I have uploaded to the server.

  I started above absolute zero. I have downloaded a new copy of Wordpress, supported my database online, active, work, reinstalled WAMP. Everything worked perfectly. Even got rid of the above errors that Dreamweaver gave me.

  When I placed the .htaccess file servers in the new copy of my local site folder, that's when things went haywire.

  Here is what says the .htaccess file:

  RewriteEngine on

  # Use unique default PHP5 php.ini

  AddHandler application/x-httpd-php5s .php

  # BEGIN WordPress

  RewriteEngine on

  RewriteBase /.

  RewriteRule ^ index\.php$-[L]

  RewriteCond %{REQUEST_FILENAME}! f

  RewriteCond %{REQUEST_FILENAME}! d

  RewriteRule. index.php [L]

  # END WordPress

  # BEGIN WordPress

  RewriteEngine on

  RewriteBase /.

  RewriteRule ^ index\.php$-[L]

  RewriteCond %{REQUEST_FILENAME}! f

  RewriteCond %{REQUEST_FILENAME}! d

  RewriteRule. index.php [L]

  # END WordPress