V10.2 has 2 of the same clip hit the other with a green line in the middle. Help!

Similar Questions

• What happens if RMAN has stopped in the Middle?

  How can manage us if RMAN being stopped in the Middle?

  Restart RMAN backups

  With the reusable backup feature, RMAN backs up only files that were not saved after a specified date.

  bootable backup

  The feature that allows to RMAN back up only the files that have not been backed up since a specified date. Restart unit ended last backup set or copy of the image. You can use this feature after a backup fails to save the parts of the database behind the backup failed.

  On redemarrables backups

  The minimum unit of restart is a data file. However, if a backup set contains a backup piece, and this piece contains blocks of several data files, then restart unit is the backup piece. The reboot to get copies of the image unit is a data file.

  The advantage of redemarrables backup is that if the backup generates multiple backup sets, then backup completed successfully sets do not be rerun. However, if the entire database is written in a backup set, and if the backup fails to halfway through, then the whole of the backup should be repeated.

  IO errors that RMAN meets when reading files or writing for the backup pieces or copies of the RMAN image put an end to the current backup task. For example, if RMAN tries to save a file of data, but the data file is not on the disk, then RMAN complete backup. If several channels are used or redundant backup copies are created, then RMAN can however be able to continue the backup without user intervention.

  RMAN can back up only the files that have not been backed up since a specified date. Use this function after a backup fails to save the parts of the database behind the backup failed.

  You can reboot a backup by specifying the SINCE TIME clause on the BACKUP command. If the SINCE TIME is later than the time of execution, then RMAN backs up the file. If you use BACKUP DATABASE NOT BACKED UP without the SINCE TIME parameter, then RMAN backs up only files that have never been backed up.

  Restart a backup after having partially completed

  Use of the SINCE TIME parameter of the BACKUP command to specify a date after which a new backup is necessary. If the SINCE TIME is later than the time of execution, then RMAN backs up the file. If you use BACKUP DATABASE NOT BACKED UP without the SINCE TIME parameter, then RMAN backs up only files that have never been backed up.

  To back up only files which have been saved after a specified date:

  1. Start RMAN and connect to a catalog of database and recovery target (if used).
  2. Run the BACKUP ... NOT BACKED UP SINCE TIME command.

     Specify a valid date in the SINCE TIME parameter. The following example uses the default channel configured to back up all database files and logs archived recovery that have not been backed up during the last two weeks:

     BACKUP NOT BACKED UP SINCE TIME 'SYSDATE-14' DATABASE PLUS ARCHIVELOG;
     

• a white line has appeared in the middle of my screen of pavilion dv6.

  is it a hardware fault & is likely to be covered by the warranty? I had the computer since November

  shawmaggie wrote:
  Hi, thanks for the response. The line is not replicated on the TV screen. The product number is LS247EA #ABU, 5CH12613QM series dv6-6154ea name

  Thanks for the identification of the product.

  Ok.  Now we know with certainty. Your solution system of Board of Directors and the graphics are ok.

  Your display set must be replaced.

  Contact HP Total Care and get the warranty service for your laptop.

• My impressions of Adobe a line were it tell you that you must buy the program at the top of the page! I can't seem to stop, even after I got my license?, I print on: drag2PDF which has always worked! and yet I work but with this shity line

  Buy now to create a PDF file without trial watermark!

  Curiousl, Acrobat adds a watermark during the use of the test, it must be something else. All that creates the PDF file is to add the line. Contact their support.

• Skype crashes whenever I click on something that opens a window in the Middle help please!

  my Skype crashes whenever I click on a contact or the home page, or my profile and it makes it unable to serve please send suggestions on how to solve this problem because I can not download the old versions of Skype because they are stop

  Try to uninstall the currently installed version of Skype and install the previous 6.14.0.104 version by using the download links provided here:

  http://community.Skype.com/T5/Windows-desktop-client/ASUS-USB2-0-webcam-not-recognized-by-Skype-6-18...

  Be sure to turn off the automatic updates:

  Tools-> Options-> Advanced-> automatic updates-> turn off automatic updates

• HP Envy 5532 Printing green lines across the page when scanning in color

  Hi, I'm Green striped wallpaper is the best way to describe it, when I scan a document color the entire page has this striped background green and the image being analyzed. The printer is around the age of 18 months.

  I tried all the diagnostic tools that are available through the printer, nothing seems to clear it.

  Any suggestions?

  Hey @thelentons,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand that your e-all-in-one printer of 5532 Envy is scanning with green lines. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet , not a surge protector. Once it's done remove any paper flat from the printer and turn the printer off, then on again. Finally we will try to make a copy. If the copy has lines so you have a hardware problem. If you are able to make a copy without lines so you can have a software problem.

  If you have a hardware problem

  While the printer is turned on remove the cable at the back of the printer for a minute, turn on the printer and try to make a copy.

  If the copy always has lines in it then we will make a factory reset the printer. I'll send you some pointers on how to do so shortly in a private message.

  If after the reset you still have lines in print then the printer needs to be replaced. You can contact HP support by clicking here and filling out the form below.

  If you have a software problem

  I can provide you with more information, but I need to know what operating system is on your computer. If you are not sure what your operating system is you can click here to find. Please let me know what you use, and I'll be better able to help you.

  I hope this solves your problem of copy and wish you a nice day!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• HP envy smart-touch j 15: display vertical line appeared in the Middle

  How can I solve vertical line has appeared in the middle and color of windows seems also dimmed

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are having problems with your laptop display. We will surely help you with this problem

  1. Please check if the display screen / laptop showing lines even in BIOS or not

  Note: Turn on the computer laptop and typing on the F10 key to access the BIOS

  2. Please tilt the laptop display slowly to the back and the front, check and check

  If the lines are visible to all the corners of the screen

  3 Please connect an external monitor to your laptop and check if the lines appear even on the

  external monitor

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on Thumbs Up white on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP

• Why is there a difference in length between 24 fps and fps 23 976 timelines with the same clip?

  I was working on a project of 23 976 fps and I tried to import a short animated sequence of 44 TIFFs in my scenario in my first CS5.

  I imported the sequence, interpreting the film at 23 976 fps (such as it was made in AE) to check before sending it to a finished House.

  First issue. Even if I set the framerate 23 976, first CS5, indicates me 23.98 on interpreting window film. I assumed it as a rounded number.

  When I drag the attachment to my 23 976 sequence, the clip shows 43 (!) length of frames on the info panel. It lacks an image. The sequence in the original video, it really lacks a framework.

  I decided to do a test. And placed the same clip, interpreted the same way on a sequence of 24 frames per second, and the clip shows as length of 44 executives on the info panel.

  How can we, same clip shows the different quantity of frames (I don't mean time, but just raw images), on different times? It makes no sense at all! If my sequence has 44 frames, it should show in the form of 44 independent frames of the scenario that I imported it. Am I entitled?

  Just for test, I ve imported from the same sequence on AE, and in it shows as 44 frames on a timeline 23 976. How can I trust to first frame interpret in this way?

  Just one thing. The scene used as basis for the animation of the AE, has 44 executives, and it was measured and cut in a 30s film on the same first which is having this weird behavior.

  Can someone explain to me what Just happened? It s driving me crazy!

  Thanks in advance

  Mauricio Mendes

  Before you import the sequence of images, go to Edit > Preferences > media... and together the basis of split time at 23.976.

• Help please - component video using the same clip several times

  Hi people,

  I have a 9 minute video I want to cut into pieces and make a 3 min video. I searched the help system and Forum, but found nothing - very probably (not being is not a native speaker) looking for the wrong keywords.

  How can I add the same clip several times to a movie? If that has been resolved, I could do the rest with setting- and outpoints and would.

  Thank you in advance.

  Christoph

  You can place the clip on the timeline and use the Split Clip (small scissors under the monitor icon) to split your clip. Place the cursor where you want to trim your clip, and then click the icon of the scissors. Move the cursor to the next position, and then click the icon of the scissors again. Then press DELETE on your keyboard and that article will be deleted and the gap will be closed. If you wish, you can take small sections, you created and drag them around to change their positions.

  Once you have edited your clip, you can export the section 3 minutes as a DV - AVI to use repeatedly in your video. All you need to do to export is file > export > Movie. If you have several clips on your timeline you must place the work area bar (WAB), the gray bar above the timeline, on the section that you want to export. Then in the window export movie go into settings and for the beach, select work area bar.

  You can then reimport the 3 minute clip in your project and use it as many times as you want.

• I installed the version 9.0.1 v10 Firefox has crashed maybe 20 times since then. The previous version almost never crashed AND it changed as if by magic of my network connection settings.

  I installed the version 9.0.1 v10 Firefox has crashed maybe 20 times since then. The previous version almost never crashed AND it changed as if by magic of my network connection settings. disable/change actually my DHCP
  -J' I disable all my Add-ons and rebooted w/no probs but it's crazy.

  I found a FF v9 online and install it. So far it works. I'll pass on challenging FF v10

• How to watch two clips at the same time on the other, with an opacity of 50% each.

  How to watch two clips at the same time on the other, with an opacity of 50% each. It is confirmed that the position of the object even two clips of mergers.

  Thank you

  PPut a clip on top of another in the timeline panel. In the video Inspector reduce the opacity of the clip on top.

• reason for my windows 7 OS crashed & had to be re-installed seven times in nine months with the losse of precious files is the same reason that microsoft has been duffed the international space station?

  am I right to assume that the same reason, my windows 7 OS crashed & had to be re-installed seven times in nine months with the losse of precious files is the same reason that microsoft has been duffed the international space station?

  Hello

  If I understand correctly you install os 7 times, still problem happens, its just a bad sector in plateau, well shot cause want to check your hard drive a d, you need to change your hard drive to solve this problem, if it is in warranty log a ticket

• RAM is not visible, I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS. All the 4 sticks of RAM are the same brand and compatible with my motherboard.

  I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS.
  All the 4 sticks of RAM are the same brand and compatible with my motherboard.
  I'm running Windows 7 Home Premium 64 - bit, which limit memory is 16 GB, so this isn't the issue.
  I got a few BSOD - 0 x 00000109 - errors that I work.
  I ran memtest86 for a few hours and he scored 4 errors during test cycles 7.
  These memtest errors concern the bars invisible RAM or the work those?
  Any ideas as to what should I do next?
  See you soon!
  Data sheet:
  Windows 7 Home Premium 64-bit
  Intel Core i7-3820 @ 3.6 GHz
  ASUS P9X79
  GeForce GTX 650
  Team elite Dual Channel DDR3 4 GB 1333 Mhz x 4

  Thanks Joel,

  I started to individually test RAM when I noticed a quirk in the way they were organized in their locations.
  I downloaded the manual for my P9X79 and he confirmed that they were arranged in mirror mode.
  I switched two of the sticks to adjacent slots and, Lo and behold, the full 16 GB presented at startup.
  So that's one mystery solved at least.
  I'll raise the memtest to see if it includes several errors and if so will continue to individually control the RAM sticks.
  Thanks again.
  Nick

• Several changes in the same clip.

  Hi guys,.

  I have a project that requires a lot of different changes to the same clip.

  Is it possible to do without having to duplicate the same clip every time and then my new edition?

  For example -.

  Clip 1 is 20 minutes.

  My first edition is from 01:10 to 01:35.

  I then double Clip 1 and one other edit of 02:40 at 03:55.

  I use first CS5.

  Thank you

  Dave.

  Hi Jon,

  Thanks, however I think I found my answer using the sub-elements.

• How to use several different sections of the same clip in the timeline?

  Hey, I used this tutorial as a reference for editing. I have my own equipment I want change, which includes several takes different. Is it possible to use several different sections of the same clip in the timeline? You know, like the good part of a certain record keeping. I appreciate any assistance. Thank you

  Post edited by: Kevin Monahan

  Reason: changed the title of best research opportunities

  I prefer to put the clip in the Source monitor Panel, then set the points and exit. From there you can simply drag the section of the element in the sequence.

  Or, you can make a subelement, the section will have a distinct element in the bins in the project Panel. You should always keep the original material, but now you can have real subitems to work if you prefer.