VAIO care rescue not found tool.vbs

Similar Questions

• Assistance button works do not (= does ' t start VAIO Care Rescue) after having lost and recover the partition table / MBR

  Hello

  For some reason that I lost my patition table but I was able to get it back and I'm rewriting MBR. I'll be back all my partition and files contain the VAIO recovery partition except files on the operating system partition ("C:\ »). It's an unformatted partition. VAIO Care rescue didn't work so I had to format "C:\". "and reinstall windows 7 and now all is good.

  I have VAIO Care Rescue. I think that it is enough to change the partition table / MBR. What exactly is the problem and is it possible to fix the problem of button Assist?

  
  And if one removes all xxxx (include VAIO Recovery) and creates new ones, is it possible, software or image of the recovery restore partition and Assist button start VAIO Care Rescue?

  My laptop model: VPCEA25FG

  Thank you

  You can restore your computer back to factory with all the pre program and software installed by using recovery discs. For further assistance, please recommend contacting Sony's Support Center in your area at http://www.sony-asia.com/support/product/VPCEA25FGfor your model of Asia-Pacific computer. Thank you.

  If my post answered your question, please mark it as "accept as a Solution.

• VAIO Care does not.

  I have a Sony Vaio VPCF111FX laptop model. I installed the other day through the program update VAIO VAIO Care. The new version seems to be 6.3 and when I try to run it, it keeps freezing on me. Anyone of these problems? If so, what can be done to fix this?

  Thank you

  I installed 6.4 and it froze on me as the creators of post experience. I posted a thread, but no response.

  I uninstalled, installed, used the old one... not good everywhere.

• Webcam Sony laptop Vaio VGN-CR420E not found

  Hello

  My Vaio laptop webcam to work great.  Today he has stopped to detect.  It does not even show in the Vista Device Manager.  I tried to reinstall the device driver of this model sony esupport site.  Nothing seems to work.

  Anyone had any experience with this issue?

  VAIO: model VGN-CR420E (number under laptop model: PCG-5K1L)

  Installed with VISTA factory config.

  Thank you

  Dan

  follow-up: is there a dignostic for this Motion Eye webcam utility?

• can not find script file c:\windows\temp\vaio care tool.vbs of rescue

  can not find the script c:\windows\temp\ vaio care rescue tools.vbs file

  I get the same error, but I have corrected the error by removing the vaio care app in the store windows. I just keep vaio care applicaton that was installed in the office.

• Import the VAIO Care "premium tools".

  After purchasing a subscription for iolo for premium software tools I would like to know how to import in VAIO Care.

  Hi RLS-VAIO-CARE.

  Here are the steps to activate IOLO prime tool in the application to the VAIO Care:

  1) click the icon small bag VAIO Care:

  

  (2) enter your e-mail address and the activation key for IOLO premium tools:

  

  Once the activation is complete, follow these steps to use the VAIO Care premium tools:

  (1) open VAIO Care application

  (2) in the VAIO Care window, click Advanced Tools.

  (3) in the advanced screen, click premium tools.

  (4) in the VAIO Care Premium Tools window, click to start the desired VAIO Care premium tool:

  

  If my post answered your question, please mark it as an "accepted Solution".

• VAIO care premium tools

  won't let me access the page to put activation code keeps coming on IoIo page to pay?

  Hello

  In this case, uninstall and reinstall VAIO Care Premium (by IOLO) tools. Check out the following link to resolve the problem:

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1028811

  If my post answered your question, please mark it as an "accepted Solution".

• NEW Vaio Care Software Update (6.4.0.15030)

  FYI... just noticed that there is an update of the VAIO Care software on the site eSupport for my laptop model. The update date 29/03/2011 and the version # is 6.4.0.15030. It is said in the release notes that it is supposed to contain a fix for the problems download Self Heal and Patch a lot of posters have had problems with. Hope it works.

  Now just waiting for Sony to issue an update/fix to the Vaio Update software!

  I cannot remove the vesa one and installed the new on top.
  Vaio care does not open the situation worsened.

• VAIO CARE

  My VAIO Care does not start, I get messages saying that a problem has close causedt. How can I fix?

  Hi Lisalyn99,

  Can you post the model number of your COMPUTER and the operating system? It is possible that your VAIO care software may be damaged or a file may have been deleted. What we can do is to download and reinstall the original version of VAIO care and update later. I hope this helps!

• Duration of Windows7 stopping at vaio care running

  VAIO care will not work

  Hello

  If I understand correctly you are facing problems with Sony Vaio Care in your Windows 7 computer. I would like to know more information on the issue, so that we can help you better.

  1. what happens when you try to run the Sony Vaio Care?

  2. do you get any error code or error message?

  3A this works much earlier?

  4. have you made changes on the computer before this problem?

  Let us try the following methods and check if it works for you.

  Method 1:

  Try the steps in the following Microsoft Help article.

  What is a runtime error?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-runtime-error

  Method 2:

  Put the computer into clan start state, and then try to run Sony Vaio Care. Place the computer in a clean boot state will help you determine which third-party program or an application at the origin of this problem.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 3 to reset the computer to start as usual.

  If placing the computer in a clean boot state does not, then you try to reinstall Vaio care program and check. To further help related to Vaio Care contact Sony.

  http://eSupport.Sony.com/us/p/select-System.pl?Director=contact

  For more information, see the following Sony link:

  http://www.Sony.co.UK/hub/VAIO-software/VAIO-care

  Please reply with the status of the issue, so that we can better help you.

• Windows 8 Vaio care

  Above, I have a laptop of Sony vpcf1390x. My problem is after that I installed the preview of Windows 8 consumer. I know that sony is not recommended to install anything yourself and only sony can install operating systems, although I paid $ 1700, and they are not so evil do with my pc I like thank you! in any case after having run 'click care' with the LATEST version of Vaio Care all my windows apps 8 no longer works, it cuz vaio care does not recognize windows 8 and deleted all files from registry somehow. So I tried the "Cancel" option, but surprise, surprise, it failed and could not roll back. So I had to "Refresh" and it uninstalled my programs even if it only says "your apps" will be uninstalled, giving the false impression that only metro windows applications 8 would be deleted: so, instead configuration settings spent the years of my life and install programs has been removed in minuets. just pay attention to anyone with a vaio, windows8 and uses vaio care! VAIO care is bad just get winoptimizer its only 13 dollars and windows 8 still works after cleaning registrry!

  up to now, sony programs have no support for this new software, all software can works on some diferent way that they are programmed, as you know windows 8 has been created for a day's work with the tablets, so his way of working is almost completely different from the other operating system, so in this case, I recommed format you your system again and try not to use programs that can cause damage on your VAIO.

• OPERATING SYSTEM NOT FOUND VAIO

  I shut down my computer before going to bed and now when I turn on the Sony Vaio Windows 7 it says Vaio then says operating system not found. I tried to use the Windows restore USB, nothing, so I tried to repair CD, he worked went to PC repair but said my score is not correct or my HARD drive is locked. Someone at - it something that can help?

  Start you the installation media or retrieve the stick and then follow to access Advanced Startup Options in Windows 8 or 10 to run the Startup Repair tool?  This error message do you have?  Please take a photo to fix reply or write verbatim.

  When you start the BIOS configuration via the "F2" Sony, the hard drive is detected under devices in the boot order or storage?  Place first in the boot order, trigger repair/installation media using the F12 key only.

  If the hard drive is not detected, see if you can reinstall it until it comes.  If she will not appear so you can try to connect to another PC to see if we can read enough to save files, or his test condition.  Then replace it with a SSD which is the best upgrade, we can give a PC - quick as lightning.

  If she appears to run the amount shown on the HD diagnosis extended CD scan to ascertain the condition of the hard drive.  Confirm with a full disk check run from the Startup Options kick command prompt.

  You are able to execute all other advanced boot Options: restoration of the system, or Reset after saving all files that are not backed up following rescue files when Windows does not start.

  If all else fails, see if you can run the recovery Vaio, or make a clean reinstall Windows 7

  Although there are major obstacles now to get the updates of Windows running after a reinstall.  You would be better if the PC meets the Spécifications 10 Windows to do a Clean install Windows 10 improvement before the expiration of the offer, using the Windows 7 product key after installation to activate.  These steps have been used by tens of thousands of consumers without a single complaint - it's the best possible installation of Windows, you can get.

• Sony Vaio in operating system not found?

  I have a laptop Sony Vaio, model SVE14AJ16L number and I got a new drive hard since the hold had ceased to function. I didn't need all the files on the old drive, so I just jumped out. I installed the new drive, but then did not work the Assist button. I googled this and I couldn't find a solution. I need to install Vaio care, but cannot find the Vaio care for my model number. I needed to install Windows 8, but for some reason it wouldn't detect the DVD or USB. I made the USB drive bootable using rufus and I downloaded an ISO and intended to put the serial number on the bottom of my laptop. It looks like all that operating system not found. I can't go into the BIOS, because that's what the assist button, and it does not detect. The towers of DVD and USB activity led blinked his eyes, but nothing. I don't know what is happening. Even when I took out the hard drive and put in the DVD/USB, it seems still operating system not found. I can't find the model number on this site.

  TL; DR
  Installed a new drive, HELP does not, does not detect a bootable USB/DVD, appears only as an operating system not found. I made bootable USB/DVD and tested on other computers.

  Please help, thanks.

  Basically, I don't have your system to test, so I'm just guiding you the general procedures.

  First of all, FORGET the ASSIST button. To explain the question "why?" would take a lot of time and goals here is to install new windows in your new drive.

  Secondly, I highly recommend you have all the necessary drivers for your equipment before your proceed with the windows installation 8 or 8.1. I own VPCSB28GG and Windows 8.1, several functions DO not work properly as it does in Windows 7. So, unless you have a deep knowledge on the computer, do not go for windows 8.1 yet or at least try to install windows 8.1 on a different drive for a test run.

  Thirdly, I strongly recommend allows you to install Windows 7 USB stick / 8 / 8.1 since the DVD player is not a reliable source from USB. Microsoft also provides tools to help people installing Windows 7 / USB 8.x. Please google it.

  As the symptoms that you have described, I recommend the steps as follows:

  1. go in the BIOS / settings (by pressing F2 during POST) UEFI. Under start options, your system may use a different name, but in principle it is similar to this: '1 ST Boot Device' "2nd Boot Device" "3rd Boot Device"... and so on. The value '1 ST Boot Device' your desire, such as CD-ROM bootable media, DVD-ROM, external USB/HDD. In my case, it is an external device because I use USB boot Windows 7 / 8.x installation. The "2nd Boot Device" in the HARD drive internal value. Drive HARD internal is your disk newly installed (or current).

  2. run the windows installation wizard. During the installation of Windows, your computer may restart several times. However, AFTER THE FIRST USE, you must go to the BIOS / UEFI with once again. The value '1 ST Boot Device' internal HARD drive. If you forget this step, you will encounter a loop of Windows installation. So, I suggest to pay attention pls. After that Windows Setup is complete, you can install drivers for your system. Find it in Support to the Sony Web site. You will need to download the Windows 7 drivers for Windows 8 as Intel Management Engine, components Sony blah blah blah. Please keep in mind, Vaio Care cannot make you suggest.

  3. in the installation of Windows, you won't find your HARD drive to destination of installation. In this case, go to the BIOS / UEFI setting, replace your SATA AHCI by compatible IDE or SATA port configuration. You can later change back to AHCI AFTER installing your SATA driver.

• Need to Vaio Care in Windows 7 Pro recovery tool

  I need cod of Vaio Care Win 7 pro recovery tool. I have a new laptop that does not. Model; SVP1321GGGXBI.

  Thank you. Mae

  Hi mae,

  Here is the link for driver downloads and program your VAIO - Pro 13. It will be useful.

• Tecra S11: Detection for the Toshiba tool: your product is not found error

  Hello

  I use Toshiba detection tool quickly find drivers for my tecra, but since a month now, the page gives this error
  Your product is not found

  It is not a problem to choose my phone in the new drop-down list, but it was uncomfortable, when it worked.
  Is there a solution for this problem?

  What tool do you mean exactly; Panel display or Tempro?

  As far as I know there is a new version of Tempro reinstall it and check how it works

  PS: since my knowledge only European Toshiba notebook series can be detected by Tempro