VAIO USB ports (2 of 3) does not.

Similar Questions

• M40X-129: the two usb ports on the right does not work

  Hello people.

  Two days ago, I bought a satellite m40x-129. I wanted to use a usb mouse and a drive hard usb so I had to plug the device into a a usbport on the right side of the laptop, but is does not work.
  even after reinstalling with windows xp pro (I need to connect to a primary domain controller) has not changed. I installed all the drivers of the tool-cd burned by a toshiba tool in the original installation.
  Maybe it's a hardware fault. someone else has the same problem?

  Thanks, jens

  today I updated my drivers for the new 7 series chipset from intel, but the usb ports on the right still have no power and do not recognize any device.
  I'll ge see my local dealer Monday ;)

• USB ports give power, but does not

  Hello..

  I have this model

  HP Pavilion dv6 - 6155ee Entertainment Notebook

  Today, I found that when you plug the mouse into one of the USB ports on the right side... it does not work, but the mouse gives light.

  I tried on the USB Ports on the left side... It works well...

  What is the problem now?

  Good. You can try to reinstall Windows, but I would only if the usb port works under Linux. Otherwise, you are looking to replace this daughter card as Komdiv has helpfully laid out for you.

• Problem of USB ports: remove the material does not work. It works on different computers for the same USB devices

  Original title: problem of USB ports:

  I have a computer dell laptop inspiron d1420 provided with Windows vista and I have upgraded to Windows 7 ultimate, I noticed that when I plug in a USB mass storage, when I try to remove it, I don't get the safe delete the message and lately when I try to remove it, I keep getting the message He's busy and I can't remove it. I tried the same USB on another PC and I have no problem at all. I connected a printer, USB cable and wondows llok have not the driver or didn't install the printer, he left as a device not specified with the name of the printer, but I can't print. I tried with another PC that is also running Windows 7 ultimate and I have no problem, windows has installed the driver, because I used the same printer and the same cable. What is the problem with my USB 4 ports and how to fix?

  Hello

  When you get this message while trying to remove a USB, it's basically a lock for this USB device by some process running on the computer. If we know which process is this locking mechanism, we could also find which Service is associated with this problem in the computer.

  To check this, you can use a program called Process Explorer. You can download this program from the following link. Once downloaded, extract the contents of the zip downloaded to a folder on your desktop. Inside this folder, you will see a file by the name of procexp , which is the executable for Process Explorer. The download link is:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  First, plug the USB to one of the USB ports. Then, once you have the executable to Process Explorer, right-click on it and then click run as administrator. Please allow all guests UAC can occur. Once the Process Explorer is running, please follow these steps to search for processes using the USB at the moment:

  1. click on Searchand then click on manage to find them or DLL on the options menu at the top.

  2. then in the pop - up which will turn up next, type the drive letter for the USB drive connected to the computer (for example G: or H:) right now and click on Search.

  3. he should then display all instances of the process that is using this USB at the moment with the corresponding process ID (PID).

  Now, once you have the names of processes using the USB at this time, you can terminate them by clicking on them and then clicking on Manage close. Once this is done, you should be able to eject the USB safely.

  I would like to ask the names of processes lock the drive in your computer. This should give us an idea of what we might have to take the next.

  In addition, for the other issue that you mentioned, in which the computer does not automatically and correctly detects the printer when it is connected to the computer, I suggest you to check whether or not your computer Plug-and-Play service is set to automatic. Here's how you can do this:

  1. press the Windows and the R on your keyboard to get to the top of the run box.

  2. type Services.msc in the run box and press enter on the keyboard. Allow all UAC prompts that may coming up next.

  3. once it opens the window of the Services for you, scroll down to the Plug-and-Play service and double-click it.

  4. in the properties box that will come next, the Startup type should be set to Auto and the Status of the Service must be started. If this isn't the case, please put these values.

  5. click on apply then OK, close all windows in the computer and restart the computer once.

  Once these steps was performed, please check if the problem remains the same. We know the results.

  I hope that these steps raises you in the right direction in order to solve this problem. Don't answer if you still need assistance, we will be happy to be of assistance.

• HP Pavilion 15-n259TX (two Usb ports on the left does not work)

  I recently lowered the windows note 8 for windows 7 and found that the two usb ports on the left side of my laptop no longer works, that is, they do not detect anything, be pendrives or external hard drive. Can you help me fixed the problem?
  My laptop is HP Pavilion n259TX 15.

  Hello

  Install the driver usb 3.0 on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64965.exe

  Kind regards

  DP - K

• Peripheral USB has malfunctioned. Windows does not recognize it.

  Peripheral USB has malfunctioned. Windows does not recognize it.

  Hello

  ·        What is the exact error that you receive when you try to connect USB?

  ·        Since when are you facing this problem?

  ·        Which device you are trying to connect via USB?

  ·        This problem occurs only with a USB device or USB devices?

  Method 1:

  You can try to plug the USB key into a different USB port and check if you face the same problem.

  Method 2:

  Also I suggest to Uninstall USB controllersfrom Device Manager and check if it solves the problem. To do so follow the steps below:

  (a) click Start

  (b) the Device Manager type in the search bar and press ENTER

  (c) in device manager, go to the bottom and double click on Bus USB controllers, this will open a list of USB controllers to uninstall all controllers and restart the system this will reinstall all USB controllers again.

   

  Method 3:

  I also suggest to run the difficulty he provide in the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 4:

  You can also try to update the latest drivers for chipset on the motherboard manufacturer's website.

  WARNING:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also check out the link below:

  http://support.Microsoft.com/kb/555375

  Thank you, and in what concerns:
  Naman R - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• my support of modem usb, USB 1.1, but it does not work on windows 7 to the motherboard desktop h61

  my support of modem usb, USB 1.1, but it does not work on windows 7 to the card mother h61 with duel core 2nd computer office prossesor genration

  If your USB modem is provided by your ISP, check for an Ethernet RJ45 port. If the modem doesn't, connect a RJ45 connection between the modem and the computer cable and UNPLUG the USB cable. Your computer should now connect to the Internet without any problem...

• Satego P100-10F: Windows XP Lan, usb slots and the sound does not work

  Hello

  I have problems with windows vista, so I checked the forum to get information on the windows xp installation.

  I downloaded the drivers windows xp since the P100 Satellite (pspa6e), my only problem is that the LAN, usb slots and my sound does not work.

  I hope someone has a good idea for drivers or to install another driver I have sound and LAN on windows xp.

  Ty and Greetz

  See European driver of Toshiba.
  Here, you can try to install several drivers of different portable Satellite P100.
  Try all series.
  Fact is that some units of the Satellite P100 and Satego P100 series were delivered with the same features.
  Therefore, it should be possible to use the unique drivers of these series.
  Check all.

• How to use a USB microphone with voice dictation on MacBook Air?  Machine recognizes the USB device, but the microphone does not work.

  How to turn on a microphone USB bluetooth with voice dictation (Dragon for MAC) on the MacBook Air?  Machine recognizes the USB device, but the microphone does not work.   I don't see no response.   I use OS X 10.10.

  Version OS X?

• I removed the nano-receiver to the USB port & back the mouse did not.

  I have 2.4 GHz Wireless Nano Mouse (model MP2375BLK) optics.  I removed the nano-receiver to the USB port & back the mouse did not.  Batteries are fine, if I remove the battery and put it back in the red light flashes once, but the mouse will not turn on.  I checked the State of the mouse in Control Panel control (devices & printers) and it indicates that the device is functioning!

  I thank God for warranties.  Just bought itOn June 3.  Summer works fine until I removed the nano-receiver of the laptop, did not work again!  Let's get back to the store.

• After hybernation, all usb and wifi mobile devices does not work

  Original title: Hybernation question
  After hybernation, all usb and wifi mobile devices does not work. Similarly, it is not stop as well. I turn off the power to the network option all usb hubs. Problem however still closes. Please suggest. I have Windows XP Sp3 installed. All the drivers and the windows update is up to date.

  Hi Mirza.Shanawazbaig,

  1. what happens when you connect any USB device to the computer, or trying to shut down the computer after hibernation?

  2. do you have security software installed on the computer?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Method 1

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  http://support.Microsoft.com/kb/871233

  Method 2

  I suggest that you download and install the updated driver for the network adapters and display on the computer by visiting the card manufacturer or computer manufacturer website manually.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• External USB 3.0 HARD drive does not work on USB 3.0 port

  Hello guys,.

  I have a problem with my external HARD drive and the problem is that it is USB 3.0 feature does not work in my computer.

  The curious thing is that it works very well in the SATA port or a normal USB 2.0 port.

  Y at - it a failure with the HARD drive or is there something wrong with my motherboard (M5A99 fx pro r2.0)?

  Thanks in advance.

  From my point of view of the few is not HARD drive problem because the HARD drive operates in a USB 2.0 port.

  I m wondering if you tried to update the USB 3.0 driver.
  Have you tried this HARD disk in another computer / USB 3.0 ports?
  I think that its worth a check.

  Also, I read on some problems of USB 3.0 controller from different manufacturers.
  Sometimes, it might be possible that some problems of compatibility between different devices may arise.

• HP 15-g013dx: ports USB 2.0 and devices does not downgrade from Windows 7

  Hi all

  I'm trying to downgrade a 15-g013dx (J5T33UA) computer laptop HP Windows 8.1 to Windows 7. It is a four-core AMD A8 APU system.

  I have problems with the devices USB 2.0 not supported by the hardware.  I have all devices in Device Manager, but the computer does not detect the USB 2.0 devices.

  He will recognize USB 3.0 devices very well when they are plugged into the USB 3.0, but no USB 2.0 ports. Peripheral USB 2.0 do not work in any port.  I can't confirm the devices USB 1.1 at this time.

  CMOS configuration is set in Legacy mode: disable.

  Is there an additional driver or configuration that I am missing, or is there something else going on?

  Thanks in advance!

  @OtakuN3rd ,

  Hello and thanks for the display on the HP support forums.  If you want to downgrade your system to Windows 7, you'll want to download the drivers and software supported first.

  Here is the link to your drivers and support systems.

  Drivers for laptop PC HP 15-g013dx

  To make sure you material works you want to install your drivers starting with the chipset driver before all others.

  For windows 7, you'll want to check out this link as well.

  UEFI boot or legacy - tips

  If you follow that you should have no problem.

  If your USB 2.0 ports are still have a problem then contact support phone for repair options.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thanks again for posting and have a nice day

• How I fixed my USB ports not working not problem. Two ports left side previously does not... HP Dv7

  So I do not know what is not "where it will honestly, but put there just to try to help someone else who has struggled with this as long as I did it...» I ended up having my two USB ports on the left side (turned out to be my 3.0 ports) working again when they recognize nothing. I could use the USB 2 on right 2.0 ports, but the transfer rate was terrible.

  My answer on another question where someone had a similar problem... good luck!

  'Hi. '

  Not sure if this will help, but I had the same problem, the two ports on the left did not work on my Dv7. All this time I thought that the USB on the right were my 3.0 ports so I thought that would be nice, but it's been over a year that I initially had this problem and made a bunch of maintenance of the system meant that I would look through it again. In any case, I went to the Device Manager through the computer management tool. I know that you can go straight to the Device Manager, but just give you exactly how I did it. You can search just to start computer management.

  So I chose Device Manager in the menu on the left side and it looked like ordinary Device Manager. Went down to Universal Serial bus controllers... at this stage, I watched the action menu on the right and select more actions, opinions and you click Show hidden devices. After that I went through my USB controllers one by one as I had done many times before and checked them, tried the update of drivers, etc... Under the USB controllers Section, I noticed something like xHCI Host controller of compliance Test... I right click it and went into its details, I tried the driver updated and installed the new driver. 2 new USB controllers immediately arises: Renesas Electronics USB 3.0 Host Controller and root hub.

  Switched on a test drive from the right thumb to the left and the computer instantly recognized and installed the driver for the stick.

  And that was all... hope it helps even if this is later. "

  Hi @klark1kent,.

  Thank you for visiting the Forums Support HP's, welcome and thank you for the important information.

  Have a good week.

  Thank you.

• help left my ports of the laptop does not

  Hey guys,.

  my left side all of my laptop usb ports does not work, but my right side are

  It happened when I had again to download windows 7 and I checked the internet about this and he said that my bus series universal

  driver is not downloaded and I do not know what to do please help

  and I want to just my usb ports to work on my left side

  my product is:

  Product name: HP Pavilion Notebook PC g7 - 2373CA g7

  Product number: D1D30UAR #ABL

  Windows 7 Ultimate 32 bit

  Go to this link and download the driver

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=21129