Validation error when you try to schedule a backup.

Similar Questions

• Error when you try to run Windows backup under Vista

  I keep getting error messages when I try to run the Windows backup to an external drive. Aired these backups every month for a while with no problems, but now he keeps by default. An old laptop, so I am running vista.

  First of all, I got this message "error 0x8007045D: the request could not be performed because of an i/o device error." After looking on the suggestion of a forum has been a problem with the external hard drive, so I ran check disk but who gave the fire. At the same time, I tried to open a file on a separate external drive to get a similar error message - seems a little by chance...

  Because the disk check gave the fire I tried to climb back again, to get the message ' the shadow copy creation timed out. " Repeat (0 x 81000101).

  Hoping that someone would have an idea of how to fix this?

  Thank you!

  Try this link suggestions

• "Not a widget valid" error when you try to insert the widget

  I am trying to create a widget to display a text box with a scroll bar. I use 5 Captivate and Flash CS5 for Mac. I created the file .swf widget and it works fine when I open it in Flash Player. However, I get the error, 'not a widget valid' when using Insert > Widget.

  So then in Captivate, I tried file > new > Widget in Flash. Then I chose static widget (and AS 3.0 was the only option under Actionscript). I hit 'OK' and then open Flash. If I immediately save the file and publish the .swf and try to insert > Widget of in Captivate, I don't get 'a valid widget' again.

  Maybe I have the publication settings in Flash set correctly? It is hard to believe that I started the widget of in Captivate!

  Hope someone has an idea.

  Thank you

  Hello

  You can create a widget via the captiate, new project > Widget in Flash, workflow and share this fla file, so that we can check the issue?

  You can send to my address [email protected]

  Thank you

  Jean Claude.

• HP envy 5532: message key not valid error when you try to download the software

  I can't download my desire 5532 keep getting error message (key not valid for use in specified state).

  This problem is related to Microsoft Update KB2918614

  The solution is to remove this update.

  How to remove an update for Windows Vista

  If the fix works, I recommend that you 'hide' it so that it not be reinstalled automatically.

  Instructions below:

  If you don't want Windows to install an update, you need to hide.

  1. Open Windows Update by clicking on the button start . In the search box, type Update, and then in the list of results, click Windows Update.

  2. In the left pane, click Find updates.

  3. When Windows finds updates for your computer, do one of the following:

     • Click the link that tells you important updates are available if you have some updates to hide.

     • Click the link that tells you optional updates are available if you have optional updates to hide.

  4. Do right click the update you want to install, and then click Hide update. The next time you check the updates, the update will not be automatically selected or installed. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

• Error no valid identifier when you try to create a trigger

  Hi all
  
  I get this weird error when you try to create a trigger. Basically, it updates a table of different relationship on INSERT or UPDATE.
  
  The error I get is:
  * PL/SQL: ORA-00904: "cid": invalid identifier *.
  

  SET SERVEROUTPUT ON
  CREATE or REPLACE TRIGGER UPDATE_REL_TABLE 
       AFTER INSERT OR UPDATE ON XF_PROJECT_CODE
  FOR EACH ROW 
  DECLARE
       customer_count NUMBER;
       n_cid NUMBER;
  BEGIN 
       -- CHECK if company exist
       SELECT COUNT(*) INTO customer_count FROM XF_CLIENTS WHERE UPPER(client_name) = UPPER(:NEW.company);
       
       CASE 
       WHEN customer_count > 0 THEN
            -- GET CUSTOMER ID
            select t.cid INTO n_cid FROM XF_CLIENTS t WHERE t.CLIENT_NAME = :NEW.company;   // ERROR HERE!!
            
            -- UPDATE relationship table
            INSERT INTO XF_CLIENT_CODE_R (PROJECT_CODE_ID, cid) VALUES (:NEW.project_code_id, n_cid);
       
       ELSE
            -- customer does not exist
            n_cid := XF_CLIENTS_SEQ.NEXTVAL;
            
            -- Create client
            INSERT INTO XF_CLIENTS(cid, client_name) VALUES(n_cid, :NEW.company);
                 
            -- update relationship table
            INSERT INTO XF_CLIENT_CODE_R(project_code_id, XF_cid) VALUES (:NEW.project_code_id, n_cid);
            
       END CASE;
  END; 
  /
  SHOW ERRORS;

  The column exists and matches the data type (number). Any help appreciated. bit at loss where I'm wrong.

  Good fishing! Who'd do all right.

• BlackBerry smartphones, I get an error when you try to connect to my world because of the r...

  I get an error when you try to connect to my world because of verizon replacement phones

  Hello!

  Your request should be sent as follows. Go to this address:

  • https://www.BlackBerry.com/CSOHelp/index.do?ft=generic

  and complete the form. Use, in the "Please select a component:"on the ground, AppWorld billing/payment selection. " Any other setting routera simply anonymously you on these public forums. Don't forget to also include the reason why you have exceeded your maximum eligible PIN associations to AppWorld (for example, several RMA, warranty replacement, etc..). If you do not have an "order number" for that field, just use whatever it is (for example, '123456').

  If the shape responds by telling you that your PIN is not valid, please report this fact back here also there is a path separate resolution for this problem.

  If this does not work, then please come back on these forums (http://supportforums.blackberry.com/rim/) and create an account so that we can provide direct assistance.

  See you soon!

• Error when you try to run an application that worked when built with 8.6

  I have a simple program that I wrote in the 8.6 version that I've never had a problem generation and execution of applications built with it to 8.6.  Two weeks ago, I got 2009 by mail because we had very recently purchased 8.6 and I get errors when you try to run an application built with the same code using 2009.  The error relates to the Mean.vi.  He claims that he can't find it.  The error I get is as follows:

  Error loading VI 'NI_AALBase.lvlib:Mean.vi '.  LabVIEW support 3 error code: could not load façade.  I don't have access to the front panel of this vi, so I wonder if there is a problem with the runtime and not my code.  Please answer as soon as possible because it will quickly start to the impact of my calendar.  Thank you.

  Hello!

  The same problem ?

  I talked with my local OR technical support team. The application now works without any problem.

  Rule of thumb: when creating a Setup program do not forget that the option "Run Time Engine xxxx" in the category "Other installers" is selected despite the fact that the runtime is already installed.

  Best regards.

• get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  This forum is for Microsoft Security Essentials.

  You question is with Oracle Java.

  It is recommended to go to www.oracle.com to get help.

• HTTP 503 error when you try to deploy the project in Visual Studio

  I get a http 503 error when you try to deploy a project in Visual Studio-SQL Server 2005. What this mean and how can I solve this problem?

  Hello

  I suggest you refer to the following msdn link for the fix for the problem.

  http://msdn.Microsoft.com/en-us/vstudio/aa718325

• Windows7 64 I get C646 error when you try to install KB982331

  In Windows7 64 I get C646 error when you try to install the update of security KB982331.  I tried Windows update and download it directly.

  Hello

  Here's what I recommend you do:

  1. Tower of AUC. Down comes the restrictions - turn it off completely.
  2 restart your computer for the change to take effect.
  3 re - download the update of security for Microsoft Office System 2007 (KB982331) from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en
  4. install. It should work fine.
  5. If it still does not work, try to open all or part of your MS Office applications (such as MS Word, MS Excel, etc.).
  6. follow step 3.

  Let me know your results.

• code 80070017 error when you try to downland microsoft office service pack 2 on vista

  code 80070017 error when you try to download microsoft office service pack 2 for vista

  0 X 80070017-2147024873 - ERROR_CRC
  Data error (cyclic redundancy check).

  This problem may occur if there is a failure of control of cyclic redundancy (CRC) check during the update process. This failure can occur if the received file is not the file that is expected by Windows Update

  Run the Chkdsk.exe tool to check the drive for errors

  If this does not help, then manually download the update you need and see if that fixes the problem.

  Description of 2007 Microsoft Office Suite Service Pack 2 (SP2) and of Microsoft Office Language Pack 2007 SP2
  http://support.Microsoft.com/kb/953195 TaurArian [MVP] 2005-2010 - Update Services

• Windows XP SP3: Access denied error when you try to change the beginning upward in MS CONFIG. Director of applications but I am the administrator.

  original title: access denied errors when you try to change the beginning upward in xp sr CIP 3 msconfig. I am the administrator, please the administrator

  I am a user with privileges under windows xp pro service PAC 3. I recently received an access denied error message acusing me of not being the administrator when I tried to limit the start up programs in msconfig. What should I do these changes in safe mode?

  You have scanned your system for malware? It seems its infected with something. Download ccleaner install / run. Then go to tools / startup. Delete the entries that you want here

• Error when you try to install the software update of tax

  It is for the HR Block Tax software,

  Update installs successfully on the XP machine, but on windows 7, I get this

  "Windows Installer does not allow patching of managed advertised products. At least one characteristic of the product must be installed before applying the patch.

  I made sure that it is running as an administrator. Tried to use the previous version of windows. Still lost.

  Google and seems that it may occur with other programs as well. Have not found a solution very clear.

  Hello Joslinm,

  1. do you get this error when you try to install any other application?

  I suggest that you contact the H & R support and check if the application is compatible with Windows 7. Here is a link you can follow to contact support:

  http://www.hrblock.com/support/index.html

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• msncon.dll Outlook 2010 error when you try to open outlook

  msncon.dll Outlook 2010 error when you try to open outlook

  Outlook:

   

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861097.aspx

  Outlook Help Forums at the link above.

  They will help you with your Outlook questions when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• Network error when you try to read from C:\Windows\Installer\iTunes.msi

  Original title: error when you try to install iTunes on Windows Vista
  I am trying to install the latest version of iTunes available in South Africa. I use Vista to the Windows Welcome page.

  I downloaded the itTunessetup.exe file, but when I try to run the installation, I get the same message "network error when you try to read from C:\Windows\Installer\iTunes.msi.
  I am at a loss to understand this - I'm not much of a PC expert either.
  Any suggestions? Thank you

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. I suggest you follow the troubleshooting steps to check if this may help.

  Method 1:
  Run the fix it and check.
  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  You can completely uninstall older versions of iTunes installed on the computer, then I suggest you to install the latest version and check.
  Download link

  http://www.Apple.com/iTunes/download/
  
  Method 3:
  You can try the form as follows article knowledge base and check if you are able to install iTunes.
  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/HT1926

  Reference link:
  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  If the problem persists then you can contact iTunes support: http://www.apple.com/support/itunes/
  Just reply with the results. I'd be happy to help you more