Validation per cent
How can I add a "%" sign to a numeric type fields and put a limit of 100%?
In the event that the user enter more than 100% inform them that they can not enter more than 100 and then focus to the digital field again.
Thanks for your help
Together the model display as below...
{num{zz9.88'%'}
Place the script to the output of the digital field event below.
{if (parseFloat (this.) {(RawValue) > 100)}
xfa.host.messageBox ("The % is not more than 100%", "per cent", 0, 0);
xfa.host.setFocus (this);
}
Thank you
Srini
Tags: Adobe LiveCycle
Similar Questions
-
I tried to download the free trial version for creative cloud, and at about 40 per cent installed it says error ex 20 "unable to extract the files?
This is the temp folder permissions problem usually.
Here are a few solutions, Re: creative cloud hangs at 42%
You can also consult Re: creative cloud hangs at 42% why? WINDOWS help links.
-
Past the 88 per cent VCP. Interested in VCDX.
Hi guys, I spent my Friday with 88 per cent VCP.
I am interested in additional study/certification and reflected on the conditions required for the VCDX, however the costs involved seem pretty high.
Are there other means of preparation for screenings, (Director of business & Design), without having to spend approximately $6 000 on courses? IE, study guides?
All advice appreciated. Thank you
http://www.yellow-bricks.com/2009/03/07/VCDX-design-exam-how-to-prepare/
http://www.yellow-bricks.com/2008/12/09/study-guide-for-VCDX-Enterprise-exam-35/
And congratulations on your VCP.
Keep in mind about certification VCDX it is targeted at the level of the architect. the last piece, the defense is a difficult exam and if you have not any which field experience with the design of environments you will not pass review. It's not a written exam is not something that you can study, experience, that's what counts.
Duncan
VMware communities user moderator | VCP | VCDX
-
-
A3000 battery problem, charges to 99%, reduced to 15 per cent in a few minutes
Hello.
My A3000 ZTE has a battery problem. It charges quickly (in about 10 minutes) to 99%, and then when I unplug it, it would decrease 2% per minute (while the wifi / 3 g/bluetooth/auto rotation is turned off). Then it stops at 15%. It is very annoying because it worked fine yesterday. I bought the Tablet about 2 weeks ago, and the battery life was great until today.
What can I do?
Thanx
Thanks for the reply. I think I might have fixed for now.
I did the following, and now the battery works fine again:
First of all, I drained the battery, it took a few hours because he was stuck on 15%, but after awhile, it's just off. So I guess it was completely empty.
Then I kept away and loaded, it is only loaded up to 99%, but this time it took a lot longer than 10 minutes, which gave me hope. I turned it on, and the battery problem had disappeared. It works perfectly now.
Maybe these steps he has reinstalled the battery or something.
Thank you very much
-
Aurora-R4, last validated Command Center = 3.6.5.0 A04
Hi all
I would like to ask if it is possible to install the new 4.0 on the Aurora-R4, or at least command center if it will be possible. Would be really great. Now I have version 3.5.
Thank you
According to the release notes, no. Although not supported by Dell, you can uninstall the CC35, reboot, install and test new versions. If no go, uninstall them, reboot, then reinstall the CC35.
3.6.5.0 A04
www.Dell.com/.../driverdetails
Aurora-R4
Windows 7/8.14.6.18.0 A00
www.Dell.com/.../driverdetails
Aurora-R5
Windows 104.6.15.0 A00
www.Dell.com/.../driverdetails
Aurora-R5
Windows 104.5.18.0 A01
www.Dell.com/.../driverdetails
R3 - X 51
Windows 8.1/104.0.51.0 A02
www.Dell.com/.../driverdetails
Area 51 - R2 X 51 - R2
Windows 104.0.51.0 A02
www.Dell.com/.../driverdetails
Area 51 - R2 X 51 - R2
Windows 7/8.1 -
Rate of change speed per cent not available for my CC PP clip and Stretch
Hello world
I put in a graphic and loaded on the timeline where a a second term 4plus. I added a Lens Flare effect that I forced around the chart, so the Lens Flare effect would be to only the graphics area of the screen. Now I want the effect to cross the fastest graphics enhance the overall effect. When I right click on the clip and go to the speed / duration option, the percentage of the speed window is grayed out. When you try to use the rate Stretch tool, there is a red line through the icon.
Any ideas about what is happening and what I can change to make the weather changes?
Thank you
M
A graph has no speed. Extends the graph using the adjustment tool.
For stray light to move faster, you must adjust the keyframes from the center of flare.
-
What creation customer I get this ERROR "To provide a positive integer for the customer minimum balance amount or percent when the balance amount overdue type is amount or percentage respectively."
I tried troubleshooting when I saw the other post and created a new class of customer profile, but still get an error, even if I created another profile as below and existing it attached to another customer that has worked, but when I tried to create a new customer it still gives me the error. I use Oracle Applications R12.1.1
Steps I followed to create a new customer profile= Make sure that the new class of customer profile that allows you to create is in the active state. Cross check the steps below when you define a class Profile of the client... e.g. name: by DEFAULT (and active)
(* 1) profile of class tab :*
) a FWD billing balance: not enabled
(b) billing-> tax print (summary by name of tax), consolidation of rule (DEFAULT)
(c) define the conditions according to your requirement, allow the delivery & terms of substitution
(d) Dunning set according to your requirement,
(e) filled in info collectors according to your requirement of credit check enabled...
(f) reception-> auto cash rule defined as 'Standard '...
*2) Load profile * ended it according to requirement
*3) Amounts class profile* for example say currency defined as 'USD '.
(a) credit limit: 100000
(b) limits of credit order: 100000
(c) minimum amount: 1.00
(d) statement amount min: 1.00
(e) do not put any value in the type of exchange rate (for example, monthly, Plan etc...)
(f) minimum customer balance: Amount-> value: 5.00
(g) minimum balance Bill: Amount-> value: 5.00
(h) right to minimum per invoice: 1, the maximum charge per invoice: 100 under the interest Charge
(i) Reference Type as a set rate, value: 10
(j) you can avoid using the penalties for now...
Step - 2_ one) open a customer... * go to Bill the site details *-> click on the profile tab-> under class profile field please include new profile class that is created by you (for example, by DEFAULT). (b) go in the sizes tab profile-> Click (Show) on currencies USD-> check the establishment here as well, I could see it.
When I tried to create a new customer using the new profile, it's repeating the same mistake. Help, please.
Thank you for your reply Emmanuel.
Sorry could not inform earlier, I tried at first with my amount of class XX profile newly created for all currencies. But he has not solved.
When I changed the default profile for all the currencies class. It is resolved.
-
Manager tasks indicates resumes my idle process 99 per cent of the capacity of the processor
When I try to connect to my blackberry Desktop Manager to back up my phone or synchronize my media, that it connects not - so I went to Task Manager - and he says that the 'inactive' process is at 99 - which, I believe, means it takes 99% CPU, but at the bottom of the box, it does not say it is taking a lot of CPU it jumps around 0% - 2%-18%...?
the 'inactive' process is at 99 - which, I believe, means it takes up 99% CPU
It's a good thing.
tragic DLE
Adjective: (especially of a machine or plant) not active or in use: "standing idle assembly lines.The problem with the synchronization of your BlackBerry is something else - request assistance BlackBerry.
-
Y at - it anyway to know the PERCENTAGE of ink in a cartridge at a given time.
Thank you for your help.
Hello
No, you can't see the riddle of other inks with a "beautiful" picture.
Kind regards.
-
Edit per cent in the scoring of results slides.
Captivate 8, how can I add a nonbreaking space between the autogenerated number and the percentage symbol in the performance rating slide?
I use the word text container because you can choose either a legend or a
form to insert text. When using text edit mode the X button in the format
accordion (if you are on the version before 8) or the X button in the Style tab
for 8 to insert the variable in the drop-down list. Placeholder will be
$$cpInfoPercentage$ $ and will be replaced by its value over time.
-
I think I'm wrong, but don't know what the problem, please let know us, thanks.
(* to the person who has always responded with docs: do not ask me to check the docs, the metric is the number of blocks and the dba_free_space is bytes, but the are used must be the same, they must? *)
When select * from dba_tablespace_usage_metrics by used_percent desc
NOM_TABLESPACE USED_SPACE TABLESPACE_SIZE USED_PERCENT
XYZ 6973302 12386302 * 56.2984981*
If I use
SELECT / * + RULE * / df.tablespace_name "Tablespace"
DF.bytes 2 / (1024 * 1024) "size (MB)",.
"" SUM (fs.bytes) 3 / (1024 * 1024) "free (MB).
NVL (Round (SUM (fs.bytes) 4 * 100 / df.bytes), 1) "% free"
5 round ((df.bytes - SUM (fs.bytes)) * 100/df.bytes) "% used (s)".
6 OF dba_free_space fs,
7 (SELECT tablespace_name, SUM (bytes) bytes
8 FROM dba_data_files
9 GROUP BY nom_tablespace) df
10. WHERE fs.tablespace_name (+) = df.tablespace_name
11 GROUP BY df.tablespace_name, df.bytes
I get
Tablespace size (MB) free (MB) % free used
XYZ 56293.9844 1815,0625 3 * 97 *.I think I'm wrong, but don't know what the problem, please let know us, thanks.
(* to the person who has always responded with docs: do not ask me to check the docs, the metric is the number of blocks and the dba_free_space is bytes, but the are used)It's data files are CANGROW ?
Select file_name, bytes/1024/1024, maxbytes/1024/1024, user_bytes/1024/1024 CanGrow form dba_data_files where nom_tablespace ='&TBS';
-
How to put a preloader showing loading per cent to this flash Gallery?
I am loading all thumbs and images in a container on a single image using script of action... but the size of the SWF becomes 1.2 MB if I want to add a top... charger the charger I am adding account executives, but my file has a single framework so that doesnot charger...
Here's the script of my Gallery... and the timeline has a single framework...
Import mx.transitions.Tween;
Import mx.transitions.easing. *;this.createEmptyMovieClip ("container", 1);
var imagesNumber:Number = 18;
var scrolling: Boolean = true;for (i = 1; I < = imagesNumber; i++) {
container.attachMovie ("thumb" + i, "thumb" + i + "_mc", i);
myThumb_mc = container ['thumb' + i + "_mc"];
If (I == 1)
{
myThumb_mc._x = (0,0) * myThumb_mc._width;}
on the other
{
myThumb_mc._x = ((1.2*i) - 1.2) * myThumb_mc._width;
}myThumb_mc._y = (Stage.height-myThumb_mc._height)/2;
myThumb_mc._alpha = 100;
myThumb_mc.largerImage = i;
myThumb_mc.onRollOver = function() {}
This ._alpha = 60;
};
myThumb_mc.onRollOut = function() {}
This ._alpha = 100;
};
myThumb_mc.onRelease = function() {}
This ._alpha = 100;
for (i = 1; i < = imagesNumber; i ++) {}
myClip var = container ['thumb' + i + "_mc"];
myClip.enabled = false;
}
scrolling = false;
_root.attachMovie ("image" + This.largerImage, "large_mc", 2);
large_mc._x = (Stage.width-large_mc._width)/2;
large_mc._y = (Stage.height-large_mc._height)/2;
new Tween (large_mc, "_alpha", Strong.easeOut, 0, 100, 0.5, true ");
new Tween(container,"_alpha",Strong.easeOut,100,50,0.5,true);
large_mc.onRelease = function() {}
scrolling = true;
var myFadeOut = new Tween (large_mc, "_alpha", Strong.easeOut, 100, 0, 0.5, true ");
new Tween(container,"_alpha",Strong.easeOut,50,100,0.5,true);
myFadeOut.onMotionFinished = function() {}
for (i = 1; i < = imagesNumber; i ++) {}
myClip var = container ['thumb' + i + "_mc"];
myClip.enabled = true;
}
large_mc.removeMovieClip ();
};
};
};
}container.onEnterFrame = function() {}
If {(scrolling)
This ._x += Math.cos (* Math.PI (-_root._xmouse/Stage.width)) * 20;
If (this ._x > 0) {}
This ._x = 0;
}
If (-cet._x >(this._width-Stage.width)) {}
This ._x =-(this ._width - Stage.width);
}
}
};Anyone know how to add a loadre to this...?
Thank you...
put a textfield on stage, assign an instance name, yourtextfield by your textfield instance name and use:
loadMovieNum("yourcurrentmainswf.swf",1);
this.onEnterFrame = preloadF;
function preloadF() {}
{if (_level1.getBytesLoaded () > 0)}
_level1._alpha = 0;
yourtextfield. Text=100*_level1.getBytesLoaded()/_level1.getBytesTotal () + "% Loaded";
{if (_level1.getBytesLoaded () > = _level1.getBytesTotal ())}
delete this.onEnterFrame;
_level1._alpha = 100;
}
}
}
-
Action/Script Photoshop to place the vertical line at the center of the Image
How to create an action (or a script) in Photoshop that creates a vertical line in the center of the page?
Here is an example of what I'm looking for.
First go to view > rulers, then right-click on the rule, and the percent change units.
(so the action registers per cent and will work on different size documents)
Then drag a vertical guide at the Center, drag one to the top of the image and the other down.
(the goal is so the online tool is aligned with the top and down and you know where is the center of the document)
For action, you can use the online tool and just save lines from the top of the image down along the center guide.
-
Location Exadata machine in a data center
Hello
Oracle is recommended to keep a free space of 90 cm behind the machine.
Unfortunately, we have only 60 cm of free space behind the machine.
Questions: The 90 per cent is mandatory? There will be problem to get out of the exadata machine a server problems?
Thank youWith this amount of space, you can barely open the door in the back, so it could be problematic. In addition, the air flow will from before backward, so you will have less room for hot air dissipates in the back. How much space you have in the front of the machine? The owner's manual says you need 152 cm at the front. This is essential, because the servers out front. If you have enough space in front of the machine, you can always move the grid to the front to give ample space in the back.
-
Hi-
We have connected tunnel / VPN configuration between an ASA 5505 - worm = 8.4 (7) and 5512 - worm = 9.2 (3).
We can only ping in a sense - 5505 to the 5512, but not of vice-versa(5512 to 5505).Networks:
Local: 192.168.1.0 (answering machine)
Distance: 192.168.54.0 (initiator)See details below on our config:
SH run card cry
card crypto outside_map 2 match address outside_cryptomap_ibfw
card crypto outside_map 2 pfs set group5
outside_map 2 peer XX crypto card game. XX.XXX.XXX
card crypto outside_map 2 set transform-set ESP-AES-256-SHA ikev1
crypto map outside_map 2 set ikev2 AES256 ipsec-proposaloutside_map interface card crypto outside
Note:
Getting to hit numbers below on rules/ACL...SH-access list. I have 54.0
permit for access list 6 outside_access_out line scope ip 192.168.1.0 255.255.255.0 192.168.54.0 255.255.255.0 (hitcnt = 15931) 0x01aecbcc
permit for access list 1 outside_cryptomap_ibfw line extended ip object NETWORK_OBJ_192.168.1.0_24 object NETWORK_OBJ_192.168.54.0_24 (hitcnt = 3) 0xa75f0671
access-list 1 permit line outside_cryptomap_ibfw extended ip 192.168.1.0 255.255.255.0 192.168.54.0 255.255.255.0 (hitcnt = 3) 0xa75f0671SH run | I have access-group
Access-group outside_access_out outside interfaceNOTE:
WE have another working on the 5512 - VPN tunnel we use IKE peer #2 below (in BOLD)...HS cry his ikev1
IKEv1 SAs:
HIS active: 2
Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
Total SA IKE: 21 peer IKE: XX. XX.XXX.XXX
Type: L2L role: answering machine
Generate a new key: no State: MM_ACTIVE
2 IKE peers: XXX.XXX.XXX.XXX
Type: L2L role: answering machine
Generate a new key: no State: MM_ACTIVESH run tunnel-group XX. XX.XXX.XXX
tunnel-group XX. XX.XXX.XXX type ipsec-l2l
tunnel-group XX. XX.XXX.XXX General-attributes
Group - default policy - GroupPolicy_XX.XXX.XXX.XXX
tunnel-group XX. XX.XXX.XXX ipsec-attributes
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.SH run | I have political ikev1
ikev1 160 crypto policy
preshared authentication
aes-256 encryption
Group 5
life 86400SH run | I Dynamics
NAT interface dynamic obj - 0.0.0.0 source (indoor, outdoor)
NAT source auto after (indoor, outdoor) dynamic one interfaceNOTE:
To from 5512 at 5505-, we can ping a host on the remote network of ASA local# ping inside the 192.168.54.20
Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.54.20, wait time is 2 seconds:
!!!!!
Success rate is 100 per cent (5/5), round-trip min/avg/max = 30/32/40 msDetermination of 192.168.1.79 - local host route to 192.168.54.20 - remote host - derivation tunnel?
The IPSEC tunnel check - seems OK?
SH crypto ipsec his
Interface: outside
Tag crypto map: outside_map, seq num: 2, local addr: XX.XXX.XXX.XXXoutside_cryptomap_ibfw to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.54.0 255.255.255.0
local ident (addr, mask, prot, port): (192.168.1.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.54.0/255.255.255.0/0/0)
current_peer: XX. XX.XXX.XXX#pkts program: 4609, #pkts encrypt: 4609, #pkts digest: 4609
#pkts decaps: 3851, #pkts decrypt: 3851, #pkts check: 3851
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 4609, model of #pkts failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#TFC rcvd: 0, #TFC sent: 0
#Valid errors ICMP rcvd: 0, #Invalid ICMP errors received: 0
#send errors: 0, #recv errors: 0local crypto endpt. : XX.XXX.XXX.XXX/0, remote Start crypto. : XX. XX.XXX.XXX/0
Path mtu 1500, ipsec 74 (44) generals, media, mtu 1500
PMTU time remaining: 0, political of DF: copy / df
Validation of ICMP error: disabled, TFC packets: disabled
current outbound SPI: CDC99C9F
current inbound SPI: 06821CBBSAS of the esp on arrival:
SPI: 0x06821CBB (109190331)
transform: aes-256-esp esp-sha-hmac no compression
running parameters = {L2L, Tunnel, group 5 PFS, IKEv1}
slot: 0, id_conn: 339968, crypto-card: outside_map
calendar of his: service life remaining (KB/s) key: (3914789/25743)
Size IV: 16 bytes
support for replay detection: Y
Anti-replay bitmap:
0xFFFFFFFF to 0xFFFFFFFF
outgoing esp sas:
SPI: 0xCDC99C9F (3452542111)
transform: aes-256-esp esp-sha-hmac no compression
running parameters = {L2L, Tunnel, group 5 PFS, IKEv1}
slot: 0, id_conn: 339968, crypto-card: outside_map
calendar of his: service life remaining (KB/s) key: (3913553/25743)
Size IV: 16 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001--> The local ASA 5512 - where we have questions - tried Packet Tracer... seems we receive requests/responses...
SH cap CAP
34 packets captured
1: 16:41:08.120477 192.168.1.79 > 192.168.54.20: icmp: echo request
2: 16:41:08.278138 192.168.54.20 > 192.168.1.79: icmp: echo request
3: 16:41:08.278427 192.168.1.79 > 192.168.54.20: icmp: echo reply
4: 16:41:09.291992 192.168.54.20 > 192.168.1.79: icmp: echo request
5: 16:41:09.292282 192.168.1.79 > 192.168.54.20: icmp: echo reply--> On the ASA 5505 distance - we can ping through the 5512 to the local host (192.168.1.79)
SH cap A2
42 packets captured
1: 16:56:16.136559 802. 1 q vlan P0 192.168.54.20 #1 > 192.168.1.79: icmp: echo request
2: 16:56:16.168860 802. 1 q vlan P0 192.168.1.79 #1 > 192.168.54.20: icmp: echo reply
3: 16:56:17.140434 802. 1 q vlan P0 192.168.54.20 #1 > 192.168.1.79: icmp: echo request
4: 16:56:17.171652 802. 1 q vlan P0 192.168.1.79 #1 > 192.168.54.20: icmp: echo reply
5: 16:56:18.154426 802. 1 q vlan P0 192.168.54.20 #1 > 192.168.1.79: icmp: echo request
6: 16:56:18.186178 802. 1 q vlan P0 192.168.1.79 #1 > 192.168.54.20: icmp: echo reply
7: 16:56:19.168417 802. 1 q vlan P0 192.168.54.20 #1 > 192.168.1.79: icmp: echo request--> Package trace on 5512 does no problem... but we cannot ping from host to host?
entry Packet-trace within the icmp 192.168.1.79 8 0 detailed 192.168.54.20
Phase: 4
Type: CONN-SETTINGS
Subtype:
Result: ALLOW
Config:
class-map default class
match any
Policy-map global_policy
class class by default
Decrement-ttl connection set
global service-policy global_policy
Additional information:
Direct flow from returns search rule:
ID = 0x7fffa2d0ba90, priority = 7, area = conn-set, deny = false
hits = 4417526, user_data = 0x7fffa2d09040, cs_id = 0 x 0, use_real_addr, flags = 0 x 0 = 0 protocol
IP/ID=0.0.0.0 SRC, mask = 0.0.0.0, port = 0, = 0 tag
IP/ID=0.0.0.0 DST, mask is 0.0.0.0, port = 0, tag = 0, dscp = 0 x 0
input_ifc = output_ifc = any to inside,Phase: 5
Type: NAT
Subtype:
Result: ALLOW
Config:
NAT interface dynamic obj - 0.0.0.0 source (indoor, outdoor)
Additional information:
Definition of dynamic 192.168.1.79/0 to XX.XXX.XXX.XXX/43904
Direct flow from returns search rule:
ID = 0x7fffa222d130, priority = 6, area = nat, deny = false
hits = 4341877, user_data = 0x7fffa222b970, cs_id = 0 x 0, flags = 0 x 0 = 0 protocol
IP/ID=0.0.0.0 SRC, mask = 0.0.0.0, port = 0, = 0 tag
IP/ID=0.0.0.0 DST, mask is 0.0.0.0, port = 0, tag = 0, dscp = 0 x 0
input_ifc = inside, outside = output_ifc...
Phase: 14
Type: CREATING STREAMS
Subtype:
Result: ALLOW
Config:
Additional information:
New workflow created with the 7422689 id, package sent to the next module
Information module for forward flow...
snp_fp_tracer_drop
snp_fp_inspect_ip_options
snp_fp_inspect_icmp
snp_fp_translate
snp_fp_adjacency
snp_fp_fragment
snp_ifc_statInformation for reverse flow...
snp_fp_tracer_drop
snp_fp_inspect_ip_options
snp_fp_translate
snp_fp_inspect_icmp
snp_fp_adjacency
snp_fp_fragment
snp_ifc_statResult:
input interface: inside
entry status: to the top
entry-line-status: to the top
output interface: outside
the status of the output: to the top
output-line-status: to the top
Action: allow--> On remote ASA 5505 - Packet track is good and we can ping remote host very well... dunno why he "of Nations United-NAT?
Destination - initiator:
entry Packet-trace within the icmp 192.168.54.20 8 0 detailed 192.168.1.79
...
Phase: 4
Type: UN - NAT
Subtype: static
Result: ALLOW
Config:
NAT (inside, outside) static source NETWORK_OBJ_192.168.54.0_24 NETWORK_OBJ_192.168.54.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination
Additional information:
NAT divert on exit to the outside interface
Untranslate 192.168.1.79/0 to 192.168.1.79/0
...Summary:
We "don't" ping from a host (192,168.1.79) on 5512 - within the network of the 5505 - inside the network host (192.168.54.20).
But we can ping the 5505 - inside the network host (192.168.54.20) 5512 - inside the network host (192.168.1.79).Please let us know what other details we can provide to help solve, thanks for any help in advance.
-SP
Well, I think it is a NAT ordering the issue.
Basically as static and this NAT rule-
NAT interface dynamic obj - 0.0.0.0 source (indoor, outdoor)
are both in article 1 and in this article, it is done on the order of the rules so it does match the dynamic NAT rule rather than static because that seems to be higher in the order.
To check just run a 'sh nat"and this will show you what order everthing is in.
The ASA is working its way through the sections.
You also have this-
NAT source auto after (indoor, outdoor) dynamic one interface
which does the same thing as first statement but is in section 3, it is never used.
If you do one of two things-
(1) configure the static NAT statement is above the dynamic NAT in section 1 that is to say. You can specify the command line
or
(2) remove the dynamic NAT of section 1 and then your ASA will use the entry in section 3.
There is a very good document on this site for NAT and it is recommended to use section 3 for your general purpose NAT dynamic due precisely these questions.
It is interesting on your ASA 5505 you duplicated your instructions of dynamic NAT again but this time with article 2 and the instructions in section 3 that is why your static NAT works because he's put in correspondence before all your dynamic rules.
The only thing I'm not sure of is you remove the dynamic NAT statement in article 1 and rely on the statement in section 3, if she tears the current connections (sorry can't remember).
Then you can simply try to rearrange so your static NAT is above it just to see if it works.
Just in case you want to see the document here is the link-
Jon
Maybe you are looking for
-
My smtp has been changed to smtpa and I can send is no longer. The port is 2225. Help
Bell Aliant has changed to smtpa port 2225, I'm set up correctly but can't send. They do not support Thunderbird. I can receive.
-
Print screen button does not work
I have a Lenovo R61i Notebook. Print screen button does nothing. How can I print screen on this computer?
-
Windows Vista will not accept my passowrd even if I put the password in. What should I do? I can't get into what it is.
-
Factory restore Dell Inspiron 1525
Go to restore my Dell Inspiron 1525 to its Restore Original factory by inserting the DVD provided with resettlement the machine, I'm wrong delited ogical C drive and installed comeletely new Vesta Home top with the same DVD. This process does not res
-
A virus / malware (not sure one) called gvo6 has loaded on my computer and is the default home page regardless of any setting I change. I've upgraded Microsoft essentials and protection against malware and makes multiple scans with no result. I tried