Various / various: Windows 7 Installation Issues

Similar Questions

• Windows 7 installation issues (0 x 8007005)

  I recently added an SSD with a view to the Bay of my macbook pro unibody and am trying to install a new copy of Windows 7 Ultimate x 64 on it.

  If I go to run the installer of my installation of Windows 7 on my hard drive via the optical drive connected via usb, I get an error 0 x 8007005 Windows could not create an installation folder.  The same problem occurs when I try to run the installation ISO loaded on a usb key. I tried browsing the /tempdrive:d setup.exe installer where d is the ssd without success.  I uninstalled bootcamp as suggested also.

  As alternative, if I throw every OSX bootcamp assistant installer or try to boot from the cd, the screen goes black and it never does to all guests.

  Thanks for the help

  Hello

  See the link below:

  Boot Camp: Windows 7 Installation, frequently asked questions

  http://support.Apple.com/kb/HT3986

  If the problem persists then please contact apple for assistance support.

  www.Apple.com/support/

• Windows Update installation issues

  I just bought a new laptop from HP HDX16 last Monday and I've seen a few problems with the installation of the updates. The ball of the small window appeared on my computer Saturday saying "new updates are available" I clicked on it, looked at 33 updates and 5 of those optional, agreed terms and began to download. After that, they started to install. It is said 'Installation successful' click to restart. When I restart my computer, it displays a blue "Update Configuration" page and gives a percentage... It is 100% and restarts and this black page comes with a number of a number (e.g. today was 0/117000 and when he arrives at 117000 TI clicks away) it then goes to a another blue page goes right to say "step 3 of 3-0% complete". He will be sitting on this page from 20 minutes to an hour, then to a page that talks updates could not be installed. Then go to my home page. After a few minutes the ToolTip appears again on the updates and it's the same 38 updates. He made 6 or 7 times and I can't understand it. What should I do to get these important updates installed?

  Hi slash25rc,

  Thank you for using the Microsoft Windows Vista Forums.

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.

  http://support.Microsoft.com/kb/971058

  If this does not work, we perform the clean boot procedure to update your Windows.

  To perform the clean boot procedure, follow the instructions in the link below.

  http://support.Microsoft.com/kb/929135

  After you install updates to Windows, put the computer back in the Normal mode.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Windows 7 Installation Issues

  I recently installed Windows 7 Professional on my computer that was running Windows 7 Home Premium. There is not a big problem, I wanted to just update and potentially gain some speed with all old and unnecessary of past files/programs. However, after the installation, I found that virtually all drivers are no longer except for the most basic versions, and I'm completely unable to connect to the Internet. The network icon appears 'No available connections' and when I open the network and sharing Center, I am unable to see the map (and unable to change its settings). It's as if the network card has disappeared. I can't even connect with a wired connection to our router, so I can't try to find the drivers to replace all those missing. If someone could help, that would be greatly appreciated, because school is starting soon.

  P.S. When I run the WIndows Network Diagnostics, it says: "Windows did not detect a network card is installed correctly. If you have a network card, you will need to re - install the driver. "However, when I try to do, he states that he is unable to comlete, due to their status as no adapter.

  HP ProBook 4530 s

  Windows 7 Professional

  4 GB OF RAM

  2.10 GHz

  You need the driver for the Atheros WLAN card...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_108905_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Printer with Windows Vista installation issues?

  I recently had the hard drive on my Compaq CQ50 replaced.  I am running Vista Home Premium.  I went to the respective websites of the manufacturers of my printers and downloaded the drivers for them.  Printers have been installed according to the "Assistant", but I'm unable to print using them.  I get the message to install the drivers for the respective printers whenever I get on the computer, but he does not see the printer drivers which I downloaded earlier.  I have installed and uninstalled printers, deleted the printer and re downloaded drivers without success.

  try restarting in safe mode (with networking) to do the installation/activation.

  Win7 start in safe mode - http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode - please let us know if works or not.

• Photoshop Elements & first Elements 14 on Windows 10 Installation Issues

  I bought Photoshop Elements & first 14 elements (student and teacher added) and try to install it on my PC for Windows 10. When I try to run the set - up.exe it tells me there is an error during initialization, possibly because of a missing file. I just started the process and only downloaded. I was not very far, oops.

  Hi dhazan29,

  Please use the downloaded file or download a new from here: Download Photoshop Elements | 14, 13, 12, 11, 10

  After you download the .7z file, you must first extract and then run installation, if you go directly launch the setup that it will not be installed.

  You can use WIN RAR to extract the 7z file:

  WINDOWS: http://www.rarlab.com/rar/winrar-x64-531.exe

• Windows vista installation issue

  Serial number in my cell phone will work with any language version of windows vista?

  Hello

  Normally windows language versions must be purchased from Microsoft.

  If the operating system that you are trying to put on your computer is not the same that the one supplied with the machine, then it won't work.

• Portable Photoshop CS4 on Windows 8 installation issue

  I tried to install Photoshop CS4 on my new computer laptop under Windows 8, using my drive. I received the message: "we have looked into the default locations of qualification of the products installed on this computer, but none have been found."

  Know that CS4 is not totally compatible with Windows 8 - in particular, the 64-bit version.

• Windows XP Installer does not not for updates or MS Office 2010. Error says Safe Mode, but I'm not in it.

  Windows XP Installer doesn't work is not for the automatic updates or MS Office 2010. Error says Safe Mode, but my machine is not in Mode without failure.

  When I try to run MS Office 2010, it starts a dialog box "preparing to install...." "even if I had used it for a few years. In the end, it fails and tells me whether I'm in Mode safe or I need to reinstall Windows Installer, I have done several times.

  I can automatically download updates and they seem to be installed, but all fail at the end.

  Any ideas on how to address this problem? Yes, I know that it is probably recommended to buy a new PC, but I need this machine operate fully for the next months. Then by reloading the operating system does not, either. He told me that my XP disc is the wrong version.

  Thanks in advance for any ideas.

  Hello

  1. What is the exact error message that you receive?
  2 have you made changes on the computer before this problem?
  3. all of the updates fail to install?
  Method 1: Make sure that the Windows Installer service is not set to disabled.

  (a) click Start, click run and type services.msc and press Enter to open Services.
  (b) click the Windows Installer service, and then click Properties.
  (c) if the startup type box is set to Disabled, change it to Manual.
  (d) click on OK to close the Properties window.
  (e) right click on the Windows Installer service and then click Start. The service should start without errors.
  (f) click on the file menu, and then click exit.

  Method 2: Error message "Could access the Windows Installer Service" when you install a program in Windows XP
  http://support.Microsoft.com/kb/315353
  Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756
  Also note: Please, do not KB315341 (how to perform an upgrade on the spot (reinstallation) of Windows XP)
  Method 3: You can also download the latest version of Windows Installer from the link below:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
   
  Reference: troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation issues
  http://support.Microsoft.com/kb/906602
   
   
  
   
   

• hard drive is seen in bios but not in windows vista installation

  Hello, I have a hp ze2315us pavilion which is also a hp pavilion ze2000 cto, I have 1 GB of ram, a disc 60 hard IC25N040ATMR04 Go-0-(PM) and it is part of the bios and I had vista installed previously, but there was a corrupt file so I formatted and deleted the partition so there is all the space unallocated, then I restarted the computer and the disk still appears in the bios , but when he said where would you like to install the operating system it says theres no HDD found please help! Also, I try to install vista home basic 32-bit edition

  Hi hp pavilion ze2000 cto.

  Thanks for posting in the Microsoft Community.

  I understand that you are facing the issue with the hard drive in the bios but not appear in the windows vista installation.

  Given that the problem is related to the BIOS and a hardware malfunction as possible, I suggest you to contact the manufacturer of the computer for further assistance regarding this issue.

• Mobile Windows device installation

  To the right,.

  I try to install Windows Mobilde 6.1 device 32-bit for Windows Vista in the next edition of windows, but the software didn't install it. Edition of Windows: Windows 7 Professional, Service Pack 1 (32-bit).

  When I run the executable file. I see the bar that appear and disappear, but after searching for the sw. I see that it was not installed.

  It would be great if you could help me with this facility,

  Kind regards

  David please chk these links

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-Mobile-Device-Center-61-installation-issue/6f11b31b-4f48-4CCE-BFBD-76c1c2d80266

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-Mobile-Device-Center-installation-issue/97ae5162-72a4-4467-9e5d-e1c7ce2d0afa

• Works Suite 2003 will not install on windows 7. compatibility issue?

  Original title: Works Suite 2003 will not install on windows 7. compatibility issue? If so how to solve it.

  I tried to install Works Suite 2003 on my laptop using Windows 7, 64 bit. He has a problem loading and wants to perform a clean boot. The boot minimal instructions do not apply to windows 7, so how can I get this Microsoft program on this computer running a Microsoft OS?

  Hello

  ·        Which edition of Windows 7 you are using?

  Works Suite 2003 is not compatible with Windows 7. Click on the link below.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=works%20Suite%202003%20&OS=64-bit

  You can try the byAndre.Ziegler suggested in his previous post suggestions, but note that XP mode will only work if you have Windows 7 Professional / Enterprise / ultimate.

  Apart from this, you can install the program in compatibility mode and check if it works or not.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  See the article mentioned below for the minimum system requirements for the continuation of the work 2003.

  Works Suite 2003: Minimum system requirements for the Installation of Works Suite 2003

  http://support.Microsoft.com/kb/331105

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 installs using Bootcamp in the Sierra of the BONE

  Windows 7 installs using Bootcamp in the Sierra of the OS?

  The system requirements for installing Windows 7 is provided here: install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support

• Problems with the windows 10 installation partitions

  So I try to install windows 10 via bootcamp on my macbook pro 2012.

  However, I still have problems when I get to the screen of partition on windows 10 installation.

  So I opened the USB BOOT EFI and install from there.

  I enter my product key, accept the license, and I'm greeted by the partitioning. I select the bootcamp partition, but it will not format, gives me an error message, or it will allow me to format, but no real format. If I try to delete the partition I can't create a new one, because it gives me an error message. If I try to solve this problem by making the partition EXFAT / FAT always displays the problem. If I format it under OS X EXTENDED it allows me to move forward, but after installation, it simply gives me the blue screen of death trying to boot from the BOOT EFI of SSD.

  No idea how to solve this problem, I am getting very frustrated and frankly upset against apple to give instructions so little.

  Thank you.

  Is there a particular reason to interrupt the normal process flow using the Alt/Option key? Is your USB, USB2 flash drive Installer?

• Satellite M30X windows 2000 installation problem

  I noticed ribooth has also posted a message with the same problem... but I haven't seen a real answer. The problem: if I try to install Windows 2000 Professional (including SP2) on my satellite M30X-130. The windows 2000 Setup program crashes with a "page in a no fault paged area" in acpi.sys just at the moment where the status in the status bar has been changed from windows 2000. If I press F7 during startup, acpi support is disabled and no page error occurs but the windows 2000 installation hangs on "the first screen" where you should be able to start, stop and? installation. There is no additional hardware installed and I'm unable to partition and format the HD with W2k. If I do it with win98 and create a FAT32 partition and try to install w2k on it I get the same ' page in a no fault paged area "acpi.sys error. Any suggestions to fix this?

  Hello
  Make sure that the system BIOS and other hardware is compatible with Windows 2000.
  This article may also help.

  HOW to: Specify a specific HAL or a third party during the installation of Windows
  http://support.Microsoft.com/?ID=216251

  Good bye