VCA mode disabled / vmotion work?

Similar Questions

• VCA mode - vm vmotion level lower than the level when turned on?

  Hi all, trying to get a definitive answer on this one there...

  Assuming that ESXi 5.1 u2, if you have two clusters, a set to VCA = Westmere and a game to Haswell, could you vmotion a powered on virtual machine cluster (Westmere) at a lower level to the upper level (Haswell) cluster, or must it be turned off?  I realize that, to take advantage of the latest processor have together, the virtual machine power cycle is required, but I didn't understand if you can vmotion it when turned on?

  Thank you! ~

  Assuming that ESXi 5.1 u2, if you have two clusters, a set to VCA = Westmere and a game to Haswell, could you vmotion a powered on virtual machine cluster (Westmere) at a lower level to the upper level (Haswell) cluster, or must it be turned off?  I realize that, to take advantage of the latest processor have together, the virtual machine power cycle is required, but I didn't understand if you can vmotion it when turned on?

  Yes, you can vMotion as a virtual computer to a host of generation more recent CPU very well provided that it contains of identical CPU instructions sets that older CPU's (the host has them enabled in BIOS too). You can vMotion that their return to guests because as long as you do not have virtual machines powered bike, they will continue to work with the old base EVC.

  I also vMotioned VMs hosts generation Nehalem to new hosts of Sandy Bridge earlier without problem.

• generation modes feature vMotion

  Hi all

  We want to buy the new server to our cluster with Intel Xeon E5-2600-v3 series CPU 'Haswell génération', I wonder if the family generation haswell supports "Nehalem ' and 'Sandy Bridge' generation for vMotion and and vice versa...

  According to VMware compatibility matrix guide 'Haswell génération' is not compatible with the Intel Xeon "Nehalem génération" 55xx series or intel Xeon 2600 E5 Sandy Bridge family...

  Just want to be sure if vmotion works or does not work with the new generation of cpu...

  

  Thanks for you answers!

  As usual, vMotion between different generations of CPU of a seller is only supported, and works with VCA. See:

  • Enhanced VMotion compatibility processor support (CTS)
  • FAQ of EVC and CPU compatibility

  So, you'll need the level of reference VCA in the cluster to the generation of the older Intel processor to a host in the cluster.

  If you are mixing Sandy Bridge and Haswell CPU, set the mode of the VCA on Sandy Bridge.

  If you are mixing Nehalem, Sandy Bridge and Haswell, choose CVS Nehalem mode.

• VCA mode

  I try to enable CVS mode on a cluster, but get the message "host is not allowed in the compatibility mode of the current cluster Enhanced vMotion.". Under voltage or suspension of the virtual machines on the host can use CPU features hidden by fashion. ».

  The Group had initially 2 servers Dell PowerEdge R810 with dual cpu Intel Xeon E7540. I am trying to add 2 older servers Dell PowerEdge R900 with quad cpu Intel Xeon E7320. I'm guessing it wont let me enable it because virtual machines under tension using the more recent servers (R810) and their cpu. My guess is correct? I need to power all of my virtual machine to enable CVS or y at - it another way to activate?

  Hello

  Yes your proposal was correct. You can disable all your virtual machines to the VCA mode.

  More information about the activation of the CVS: VMware KB: VCA allowing on a cluster when vCenter runs in a virtual machine

  Kind regards

  Julien

• Private browsing mode does not work

  I've been without a pc for a while, now have a new with Windows 10. Just downloaded latest Firefox. I put it to always open in private browsing mode. But it does not work. When I close the browser, and then re - opening, my start page is not display the mask or indicate private browsing. I can get it in the usual way, just right-click on the icon that gives you options to open the new window or a private.
  I tried to turn on/off the navigation mode private the several times, still no luck.

  Probably, you won't see the purple mask of private browsing mode when you are in permanent PB mode because all windows are automatically in PB mode.
  You will see the mask when Firefox is started in normal mode and you open a new private window.

  You can use an extension for private browsing mode support tab.

  • Private tab: https://addons.mozilla.org/firefox/addon/private-tab/
  • Private browsing mode tabs get a dotted underline
  • You can enable or disable private browsing mode / disable via the context menu of a tab

• FF to crash immediately. Updated FF, authorized administrator, disabled hardware acceleration, Add - ons mode disabled

  FF to crash immediately in normal mode - ID: 132f75b1-9f3e-46b7-9b43-74e4b2121121. FF, put up-to-date, authorized, administrator mode disabled hardware acceleration, disabled add-ons.

  FF opens in Mode safe, but otherwise crashes repeatedly at the opening. FF worked for time, up to half, but today (especially since the update of FF v.17) crashes immediately. As well as repeated ff crashes, Win 7 crashes (less frequently) with a variety of notes for each accident.

  (email removed by mod)

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

• VCA mode in settings of the cluster

  I was wondering what an experience everyone was with the VCA mode settings.  Usually allow you it?  What mode for processors Intel you choose usually?

  the only time you need to activate the VCA is when you have vMotion compatibility issues.  And when allowing it, CVS will choose what mode is the best

• HP 27 1200 Omni: Game Mode does not work on Windows 10

  Hello

  I just installed Windows on my Omni 10.

  Unfortunately, the game (and TV) mode no longer works!

  In other words, when pushing the nutton game mode, the screen Windows and sound/app continues to operate and on the screen, while there is no mouse or keyboard or remote control possible entry!

  When you press the button mode of the game again, the system returns to windows 10.

  I would not go back to windows 8.1, so hopefully this is a known issue with the right solution!

  @Atripple

  HP has not all W10 drivers for this model.

  Read here.

  http://support.HP.com/us-en/product/HP-Omni-27-desktop-PC-series/5304895/model/5317996/document/c04763435/

  REO

• We see disable my working group in the properties of my computer, we cannot run network in my office

  We see disable my working group in the properties of my computer, we cannot run network in my office

  Some things that can cause this:

  1. you are not logged in as administrator.

  2 - the Client for Microsoft Network is not installed Properties Control Panel/Network Connections/Local Area Network)

  3 - the workstation service is not running.

  John

• When we turn the or after mode 'sleep' my motherboard will load but then nothing else... White screen. If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  When I turn on my PC or after mode 'sleep' my motherboard will load but then nothing else... White screen.  If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  I have this pc for 3 years.  My system was full of unused and unwanted programs, so I rebooted to Vista, deletted all my old files that Vista had moved into the "old." This is when I started having this disorder.

  (I made this process more yet to see if it would help with no luck)

  My first thoughts were video driver... downloaded the new drivers 3 times.  scanned all the other drivers for updates ect. nothing seems to help...

  Anyone have any ideas?

  Thank you

  Dave

  I have

  I was able to download these files.  Rthl64.sys point - one component of your network cable in pictures device driver memory.  Interestingly, the dates of the 2006 pilot (Rtlh64.sys my Sep 26 07:20:23 2006 (45190CF7)), so it's most likely your problem.  Follow these steps:

  -Download a new copy of the software/drivers on the website of Realtek here: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=7&PFid=10&Level=3&Conn=2

  -Uninstall the current software/drivers on your system

  -Install the newly downloaded drivers

  -Monitor for more BSOD

  Here is a summary of the BSOD:

  BSOD BUGCHECK SUMMARY

  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 16:23:07.947 Sun 31 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 13:18:38.380
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03de3a30 fffffa80 '05bf1050 fffffa80' 072dc010
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 22:49:49.007 sat 30 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 5:12:31.440
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03def060 fffffa80 '05bdf050 fffffa80' 04aeb2d0
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6001.18000.amd64fre.longhorn_rtm.080118 - 1840
  The debugging session: 21:48:58.144 Wed Oct 27 2010 (UTC - 05:00)
  System Uptime: 0 days 9:49:32.487
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03a1ca30 fffffa80 '05-99050 fffffa80' 039c8c60
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

  -John ( http://www.carrona.org/index.html )

• Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own.

  Original title: "sleep" mode

  Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own

  Hello

  See if this information helps you, Vista and 7 work the same:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• The vlan vmotion should join him vlan management for vmotion work?

  Host 1

  Management network is a vswitch. IP VLAN 350 172.31.250.201

  vMotion network is on an another vswitch. VLAN 500 IP 192.168.1.1

  Host 2

  Management network is a vswitch. IP VLAN 350 172.31.250.202

  vMotion network is on an another vswitch. VLAN 500 IP 192.168.1.2

  Running Cisco UCS, the vNIC for vmotion are the vlan 500 but vmotion works only when they have access to the vlan 350 the management vlan.

  Sorry for the question noob but not vmotion need access to the vlan management in order to work?

  Thank you

  No, what you're doing - vMotion running in a dedicated subnet - is actually recommended to do this. Ensure that the UCS switch ports are configured correctly, allowing the VLANS required.

  André

• can I disable drive work?

  Hello

  I have 32 GB on a single machine, 64 GB of RAM on another machine

  can I disable drive work?

  I run photoshop cc (and I have installed too many cs6) under w10 pro 64-bit and windows 7 64 bit

  seems that disable any disk in preferences is not the case...

  Thank you

  Hi Giovannivolonte

  Photoshop requires zero disk to store temporary data. N ' matter how much RAM you have Photoshop will write the data of Temp.

  You can change the location of the disk scrarch on an external hard drive if you have limited the amount of space on the main drive.

  Or you can use regular disk cleanup utilities to free up the space occupied by the data of temperature for all programs

  See Photoshop help | Memory and performance\

  Hope this helps

  Concerning

  ~ Assani

• How to pass the album Live view mode Design while working on a fluid page? The drop down option isn't there as if it was on other pages.

  How to pass the album Live view mode Design while working on a fluid page? The drop down option isn't there as if it was on other pages.

  You can not.  If you want to work with FGLayouts, I recommend drop back to the Release of June 2014 CC before they took the Design of FGLayouts mode.

  You can get the version of June 2014 DW direct links below:

  Win: http://download.adobe.com/pub/Adobe/Dreamweaver/WIN/CC/Dreamweaver_14_LS20.exe

  Mac: http://download.Adobe.com/pub/Adobe/Dreamweaver/Mac/CC/Dreamweaver_14_LS20.dmg

  Solution #2: Modify your CSS FGLayout file by adding an X to the code as shown below.  This trick DW into thinking that it is a normal page, so you can use the new Design view.   NOTE: Do not change the CSS in design Panel.  Do it in Code view.  Record.  Close DW.  New launch DW.

  /*

  Properties Grid Dreamweaver fluid

  ----------------------------------

  DW-num-CLO-mobile: X4;

  DW-num-CLO-Tablet: 8;

  DW-num-OCOL-Office: 12;

  DW-gutter-percentage: 25;

  =====================================

  Nancy O.

• Dremweaver CS6. Design mode does not work.

  

  Hello.

  Design mode does not work.

  I got this instead of the normal display mode.

  What's wrong with it?

  Kind regards

  NATA

  Go to the main toolbar and choose View > happy head and turn it off.