VCAC Orchestrator - runtime error 'add the IaaS from vCAC host host '.

Similar Questions

• A box of error with Visual C ++ Runtime error on the top and the assertion then error line 267 program appears

  Original title:

  How can I get rid of this 'box', he said Visual C ++ Runtime error on the top and the assertion then error line program 267: file_common_npngate blah blah

  Expression pPlugin Shim? I uninstalled Reg Pro and the other antivirus that both are installed on my computer. Someone at - it get this message before? What should I do? I am still able to run normal programs, but this error continues to repeat itself, I continue to close, and then I get again.

  Ali

  Hello

  1. when exactly you get this error message?

  2. what browser do you use?

  3. If Internet Explorer, what version of Internet Explorer is installed on the computer?

  4. are you aware of any changes made to the computer, before the show?

  A runtime error is a software or hardware problem that prevents a program to function properly. Runtime errors could cause you to lose information in the file that you are using, causing errors in the file (corrupt the file) so that you cannot work with it, or prevent you from using a feature.

  If it does not solve the problem, try method and forward them to the following, following.

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Method 2:

  If you get this error in Internet Explorer, try the steps in troubleshooting mentioned in the following link.

  Correct errors in Internet Explorer

  http://support.Microsoft.com/kb/822521

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  
  Method 3:

  Download and install the latest versions of Microsoft Visual C++ and are looking for the issue.

  For the 32-bit version of Windows Vista:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5555

  For the 64 bit version of Windows Vista:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=14632

  I hope this helps.

• When I try to open a PDF in a Web site, I get a runtime error and the site is stopped.

  Hello

  When I try to open a PDF in a Web site, I get a runtime error and the site is stopped. How can I fix this problem? I am running Windows XP Home Edition.

  original title: Run time error

  Hello.

  I guess you are using Acrobat Reader to view the PDF files?

  You can try to download the latest version of Acrobat Reader here:

  http://www.Adobe.com/

• Examples of error performance... ? Difference between the runtime error and the syntax error?

  Hello, I know that an implicit validation occurs before a runtime error.

  What is the difference between a runtime error and the syntax error (syntax error seems pretty obvious).

  Could you give me an example or 2 an error of execution'd. Should not be explained with statements etc. just a small example of first.

  Hello, I know that an implicit validation occurs before a runtime error.

  You do? How do you know that? What is the source of your information?

  What is the difference between a runtime error and the syntax error (syntax error seems pretty obvious).

  The syntax is checked at the time of the analysis/compile. Runtime errors occur to, of course, of execution time. You can NOT run sometimes that there are syntax errors.

  Could you give me an example or 2 an error of execution'd. Should not be explained with statements etc. just a small example of first.

  Ideally, Oracle has created an entire book of them. Make your choice.

  http://docs.Oracle.com/CD/B28359_01/server.111/b28278/TOC.htm

  The doc PL/SQL treats Exceptions language and everything that you always wanted to know about them. It also includes examples

  http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28370/errors.htm

• ATG 10.2 Runtime Error on the revision of the price stopped connecting

  Hello.

  I have a lot of questions when some users try to log on to the application. The problem is that ATG always call repriceOrder() when a connect action is run, then, it reads all the basic commands user and when there is no longer an element it causes a runtime error.

  If anyone seen this before?

  Should not be necessary to substitute LoadCommerceItemObjects.  The pipeline refreshOrder has two other processors, SetProductRefs and SetCatalogRefs, which can be configured to replace the ID product or sku in any element whose original product or sku has disappeared from the catalogue.  There is a third refreshOrder, RemoveExpiredCommerceItems processor, which gives you the ability to remove trade items that have been reported by SetProductRefs or SetCatalogRefs.

• Orchestrator how Automatic Add the computer to the specific ORGANIZATIONAL unit and edit the Description of the computer

  Hello

  We use VMware Orchestrator to clone sysprep VM templates, and join the virtual machine to the domain.

  The problem is that we cannot find a function in Orchestrator to join VM to the specific ORGANIZATIONAL unit and edit the description of the computer.

  Our workflow built sysprep on the fly so that we can not add a command in sysprep to join the specific ORGANIZATIONAL unit

  Plugin installed:

  • VIX
    
  • Active Directory
    

  Example workflow:

  Any ideas how to set up our requirements in the workflow

  Hello

  Over the past two months, I learned Orchestrator and built a large workflow highly customized for the automation of windows and linux deployments of models.  We are also in two different datacenters which each have their own ORGANIZATIONAL unit in AD.  The solution I use is "dsadd computer" (http://technet.microsoft.com/en-us/library/cc754539 (WS.10) .aspx) and then then I execute 'netdom' on Windows OS which adds the server to the domain and reboot.

  I use sysprep for the IP configuration, etc., but don't not to join the server to the domain.  Once sysprep is finished I execute the following code to add the computer object to the specific ORGANIZATIONAL unit:

  var cmdText = "cmd/c";
  "var = cmdLine" dsadd computer------"" + att_AD_OUPath + "------"-desc------"" + arg_in_AD_ComputerDescription + "\" - u "+ att_domainUser + '-p' + att_domainPass;

  order = new order (cmdText + cmdLine);
  returnCode = command.execute (true);

  If (returnCode == 0)
  {
  System.log ("computer" "+ arg_in_serverName +" has been added to the domain");
  }
  on the other
  {
  throw "error adding computer '" + arg_in_serverName + "' to the field."
  System.Error ("error adding computer '" + arg_in_serverName + "' field.");
  }

  Installation program:

  • Standalone Orchestrator installed on Server 2008
  • Active Directory Domain Services role installed on the server Orchestrator

  I hope this helps!

  Post edited by: robrtb12

• Tagsrv.exe C++ Runtime error during the shutdown of the PC

  Hello

  When we close an error appear with the message:

  Visual C++ runtime error!

  C:\Programme\National Instruments\Shared\Tagger\tagsrv.exe

  No address or other information.

  I have not found

  http://digital.NI.com/public.nsf/allkb/27A007940341705B8625716500723B97?OpenDocument

  But we don't use LabView.

  Can someone help me? Thank you!

  Environment:

  I use Visual Studio 2008 SP1 installed

  Measurement Studio 2003 v7.1.0.306

  NOR-DAQ v8.8

  NOR-488. 2 v2.60

  NI-VISA v4.4.1

  Traditional OR-DAQ v7.3

  List of the application of the system error says:

  Die description der Ereigniskennung (0) (NI Variable Engine) wurde nicht found. Der local Computer has nicht über die zum show der von einem sRemoteComputer erforderlichen Registrierungsinformationen oder DLL-Meldungsdateien messages. You must flag/auxsource das Sie einen is zum Ermitteln der description use. More information are Hilfe und Support. Ereignisinformationen:

  NEITHER Variable engine started.
  Executable: C:\Programme\National Instruments\Shared\Tagger\tagsrv.exe
  Plug in the path: C:\Programme\National Instruments\Shared\Tagger\
  Plug-Ins: LogosRTServer, NI OPC Server Plugin., MXS, LogosRTClient.

  Hello NI_addict,

  first the bad news: Measurement Studio 7.1 is developed for Visual Studio .NET 2003 and it is not supported in Visual Studio 2008, Visual Studio 2005 No.

  (I think you know who...)

  Maybe I can help you in any case.

  I think the message has to do with the shared Variable engine. (Shared variables are an easy to use way, sharing data between computers of a network).

  First step, you must perform the actions described in this document: http://digital.ni.com/public.nsf/allkb/27A007940341705B8625716500723B97?OpenDocument

  "" You will find the Variable manager programs as"National Instruments" Variable Manager ' Manager of Variable.

  "If this does not work you can try to turn off the shared variable engine: open the Control Panel start ' Control Panel. Select Administrative Tools' Services. Right-click on the Variable of National Instruments engine and stop the engine Variable. (Disable the Variable engine will not affect your other programs or Measurement Studio unless you use shared Variables.)

  When shut down you your computer, do you still get the error? We will have you uninstall and then reinstall the engine Variable.

  I hope it will solve the problem.

  Good day.

  N. Ralf

  Engineering applications

  Germany

• Microsoft Visual C ++ Runtime Error with the Dell 962 printer

  The operating system is Windows XP on startup, I get an error message, to load the driver on the Dell 962 printer.

  The printer prints, however other features like scan do not work.

  I have re-charge the driver with the same problems.

  Also, if I try to open the Dell 962 All-in-One-Center, the error reads Mircosoft Visual C ++ Run Time Error.

  Hello 1946mike,

  Thank you for your message.  Try to remove the software from the Dell printer and the driver, reboot and reinstall.  After you remove the software, click HERE to download and install the driver from the last and utility.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Runtime error 1009 after conversion from Flex 3.6 to 4.5.1

  I am trying to convert my SDK 3.6 application 4.5.1.  Process goes smoothly through many resources out there including Greg Lafrance http://www.adobe.com/devnet/flex/articles/migrating-flex-apps-part1.html series

  Now, I get an error while the application is loading in the browser.  The error text is:

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  hand / initApp ()...

  The error occurs in the code AS where I'm looking to get the URL of the player using the mx.utils.URLUtil library.  In particular, I'll put a global variable in my application to the URL of the visitor.  The specific code for this is:

  this.stServerName = URLUtil.getServerName (mainApp.url);

  URLUtil is still in use in Flex 4.5.1?  If not, is there another way to get the name of the server on the host?

  Thank you!

  Lee

  URLUtil still exists.  I would check that's null.

• Cannot add the ESX 6.0 host to vCenter Server 6.0

  OK, I'm testing laboratory a vsan 6.0 cluster.

  I have my running 6.0.0 esx hosts and vcenter server is 6.0.0 also.

  I have the services platform on a virtual machine and vcenter on another. I was able to create a data center, then a cluster below.

  Then I went to try to add a host to my group and I get this error...

  Failed to contact the specified host (hostname\IP). The host may not be available on the network, may have a network configuration problem, or that the management on this host services may not respond.

  
  

  Per this KB: KB VMware: Add a host VMware ESXi/ESX from VMware vCenter Server fails

  
  

  I confirmed that my vcenter server and platform services server can see all esx hosts. From the vcenter server, it can ping the host esx and PuTTY can access all of them. I even installed the client and it can connect to all esx hosts. I used the netbios name, IP and FULL domain name and they all work.

  I have only a single subnet, so this isn't a problem. DNS resolution works in all areas of both sides, vcenter esx hosts and host esx to vcenter.

  
  

  I am quite puzzled.
  

  
  

  
  

  OK, after working with VMware on this issue, I think that I thought about it.

  All my hosts are DL360 G6 servers.

  My hosts are run the same build «VMware-ESXi-6.0.0-2494585-HP-600.9.2.38-Mar2015.iso» ESX Downloaded from HP.

  All buildings are in trial mode.

  After placing a call to VMware, they had me build some ESX VM, the services of the platform and the vcenter VM on an ESX host. We suspended because it took all day to go upward.

  Once I woke up all the parts (sql server, esx vm, server platform & vcenter) in virtualization nested, I created my data center, then Cluster then added the ESX host.

  The hosts added properly, no error. Then I remembered when I installed ESX inside a virtual machine, I am angry that the iso, I had the habit of HP does not work in my VM nested due to virtualized hardware.

  Then a fire came into my head. We will rebuild all of the physical cluster but NOT use the CV provided the iso file but use VMware provided iso file "VMware-VMvisor-Installer - 6.0.0 - 2159203.x86_64.iso".

  I did it today. I have rebuilt all hosts with the provided iso file VMware ESX...

  Spun SQL Server vCenter, service platform, all VM VM VM you need. My AD & DNS VM are on another server, so he has been upwards all the time.

  Connected to the web interface (yuck!).

  Created my data center...

  Created my Cluster...

  Add all my Cluster hosts.

  All of this worked!

  Therefore, if you encounter the same problem, I'm plan to generate your with the provided iso file VMware ESX hosts and try it. In my case, the provided HP iso file didn't work properly for me.

  I also downloaded the iso file of HP 2 other times to make sure and do a validation test and it did the same thing.

• How to add the existing farm RDS host

  Hello

  I am very new to just skyline view installed a connection to the server and a host RDS and get Desktop + applications works very well. Now, I want to add another RDS server farm from the view I created, but I can't seem to figure out how to do this. In the Horizon view administrator GUI doesn't offer this?

  
  It is 6.1.

  It's very simple.

  First you prepare the new RDSH agent by installing the agent on the servers needed<-- now="" you="" will="" have="" rdsh="" agents="" ready="" for="">

  Now the connection to view administrator, stock left, click farms

  Select the form in which you want to add an another RDSH servers

  Click on the tab "RDS Hosts" the click Add

  See screenshot below:

  

• vCenter server from unit 5.5 after the migration from one host to another host

  Hello

  
  

  I had to migrate our VCenter Server Appliance VM (5.5 x) that uses the database into another ESXi host.

  Once the VM has moved successfully from one host to another, after the virtual machine restarts, I'm not able to connect to it.

  I get the following error: Client is not authenticated to the Service of the inventory of VMware - https://web-vcenter1:10443

  I searched and followed many articles KB including KB 2037952 with no luck. I refreshed the

  SSL certificates, etc. and ideas.

  
  

  Thank you

  Shiva
  

  Hi Ryan,

  I fixed all my issues in upgrading the VCSA to the latest version. Version 5.5.0 Build 2414847

  Other treatments VCSA had already been upgraded to this version and it worked very well.

  Thanks for help with ideas.

  PS: You were right - I log in as root and not as an administrator and this is why I did not see the SSO pages.

  -Shiva

• Runtime error on the desktop - no error of birdthrowing comes from the video card software

  Original title: graphics card error I guess that

  computer is turned on after 15 minutes, run-time error is an error right when I say he sometimes makes the desktop icons does not reset, no birdthrowing error is from the video card software
  How can I solve this problem

  name: Toraman Uygar

  Hello

  • What is the full error message that you receive?
  • How long have you been faced with this problem?
  • What were the changes made before the issue occur?

  You can check this link:

  Windows XP restarts unexpectedly or restarts when you shut down the computer

  http://support.Microsoft.com/kb/320299

• Runtime error in the model of process and sequence still happening

  I do initialization custom in the process template (in the recall of ProcessSetup). I call a .NET module which can throw an exception in certain error conditions. This causes him the process model to access the cleaning section of the process model (not the client sequence files cleaning) and that's okay. The problem I have is that I'm in my UI of the event AxAppMgr_ExecutionEnded and e. ResultStatus property argument exec indicates "success." I want that it says 'Error' or 'Incomplete' or something other than the past. The sequence of client never ran at all. While she had no failures, he could spend.

  How can I force the State to 'Error' or something other than "success"?

  Before check Execution.ResultStatus, you can check Execution.ErrorObject to see if an error has occurred and to obtain if necessary error information.

  Do something like:

  ErrorObject PropertyObjectPtr = run-> GetErrorObject();

  If (errorObject-> Exists ("occurred", 0) & errorObject-> GetValBoolean ("occurred", 0))

  {

  _bstr_t msg = errorObject-> GetValString ("Msg", 0);

  Add some other code you want here.

  }

  Hope this helps,

  -Doug

• Get a Visual C++ runtime error in the Pogo games

  When I connect to aol games pogo, a message says n micraosoftvisualc ++ runtime library error, is there a way I can fix this?

  Turns out AOL?  You can also try to download and install...

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.