vCenter and its guests Managed Firewall

Similar Questions

• vCenter and Site Recovery Manager install question

  Hello

  I want to install SRM for the first time and I just wanted to get the views of all for an implementation of SRM.  I of course have my Server Virtual Center 2

  It is the location of the respective sites.  Is there a problem with SRM installed on the servers to Virtual Center or it is recommended to have

  The SRM is installed on a dedicated server?  Also is it best practices related to MRS?

  Thank you all...

  No, you don't have problems with SRM being installed with VirtualCenter (now vCenter Server) (it can also be protected with the new VMware solution: ;)) [) | http://www.VMware.com/Products/vCenter-Server-Heartbeat/]

  But it is recommended that you separate the database for VirtualCenter database SRM

  concerning

  Jose

• Is there a way to get the list of hosts and its groups of belonging to the vCenter folder level in 5.5 web vsphere client plugin development?

  Hello

  I need to get the list of all hosts and its groups of belonging to the vcenter folder level.

  1. I created a view giving the extension point: vsphere.core.folder.monitorViews.

  2. After this step, I wrote the constraint as in my class of mediator,

  var ListConstraint:Constraint =

  QuerySpecUtil.createConstraintForRelationship ( _contextObject, 'childEntity');

  I was expecting a list of all child entities such as hosts, dc, cluster... But I have only the immediate child object which is only the Datacenter as my result.

  Is it possible to get all hosts and vCenter folder level Clusters because I need the entire list to vCenter (highest level).

  Other info:
  

  Object file has only two properties:

  1 childEntity - list of entities

  2 childType in-kind folder ('Virtual Machine', 'Data center'...)

  Is it possible to write a constraint specifying which list of childEntities I need using childType in.

  Example: Make Me childEntities that has a 'Host' and 'Cluster' childType but childType in doesn't have these two types.

  In addition, at this level, I could see the 'Associated objects' tab which has all the information I need, such as Clusters and Cluster tab hosts and host tab respectively.

  So, I think its possible to get this list to vCenter folder level.

  I have attached a screenshot representing the need. Kindly ignore the Conventions of naming in there since I edited the example comes with the sdk program.

  
  

  Query:

  1. How can I get the host and Cluster (table of relationship) list to vCenter folder level or even at the level of the vise.global.view?

  2. once I get this list, is it possible for me to manipulate that list and send the new list to IU?

  3. is there another way to do the same thing without the help of model classes and mediator?
  

  
  

  Pointers to this will be very useful.
  

  It is not possible to obtain all hosts a folder specific vCenter from a single query Data Manager.  You need to get the list of centers of data first and then get a list of data center hosts.

  It is best to make these repeated requests to the java level and return only the list that you want to the user interface.

  You can get all the objects in the host of the system with a simple query using a constraint with targetType = 'HostSystem', but you will need to eliminate those from other vCenter servers.  See how this chassis example queries all hosts the Java later in the getHosts() method: samples/chassis-app/chassisRackVSphere-service/src/main/java/com/vmware/samples/chassisRackVSphere/ChassisRackVSphereDataAdapter.java

  Another option is to use the vSphere Web Services SDK to browse vCenter. See the vSphere management forum for help on these APIs.  See this plugin of the sample using this SDK

  samples/vsphereviews/vsphere-wssdk-provider/src/main/java/com/vmware/samples/wssdkprovider/VmDataProviderImpl.java

• VMWare Virtual Center 2.5 update 3 management ESX v3.5 Update 4 and 5 guests

  I'm doing an audit of versions of VMWare and it seems that our cluster hosts are running a later update version as the virtual center server. Virtual Center 2.5 update 3 management ESX v3.5 Update 4 and 5 guests.

  Does anyone know if this causes problems. This has been the case since before I started and there seems to be no negative effect I see.

  Don't want to update virtual center update 5 as we plan to upgrade to vSphere, shortly.

  you are in a supported configuration, so you should be fine

  http://www.VMware.com/PDF/vSphere4/R40/vsp_compatibility_matrix.PDF

  However, with more agents on new hosts, you can see some are disconnects/no response errors for your hosts in vCenter.  In general, I would like to have my instance of vCenter to or superior to the latest version of ESX.

• I get the error "on the volume C: default transaction resource manager encountered an error during startup and its metadata has been reset. The data contains the error code. »

  original title: NTFS problem
  Every 5 seconds, I get a warning (event ID 136) that says: "on the volume C: default transaction resource manager encountered an error during startup and its metadata has been reset. The data contains the error code. »

  Immediately followed by an error (event ID 137) that says "on the C: volume default transaction resource manager encountered a one-time error and could not start. The data contains the error code. »

  I am running windows 7 ultimate in any way to solve this problem?
  

  Hello

  This problem occurs if the Windows file system transaction log is damaged. The Windows file system uses the transaction log to retrieve the system transactions when a file error occurs. The system of common log (CLFS) transaction logs may be left in an inconsistent state. When the CLFS transaction logs are in an inconsistent state.
  To resolve this problem, delete the files .blf and .regtrans-ms in the folder % Windir%\System32\SMI\Store\Machine.
  After you restart the computer, the registry regenerates the deleted files. These regenerated files are in a consistent state.
  1. click on Start , type cmd in the Search box, and then click cmd in the list of programs .

  2. click on run as administratorand then click continue.
  If you are prompted for an administrator password or for confirmation, type the password, or click allow.

  3. at a command prompt, type the following command and press ENTER:
  fsutil resource setautoreset true c:\
  Note these steps assume that Windows is installed in the default location, drive C. If this is not the case, adjust the drive letter of the path of the folder to match your configuration.

  4 restart the computer.

  I hope this helps.

• vCenter and View Manager running together?

  The following questions ask about vCenter and View Manager...

  -& gt; Can I install vCenter in one of my virtual servers?

  -& gt; Their problems using vCenter within a virtual server?

  -& gt; Can vCenter and View Manager be installed on the same system and run together?

  -& gt; View Manager can be installed on one of my virtual servers, once again all the problems?

  Thank you

  Marc

  Yes

  No, it is fully supported by VM

  Yes, but I do not recommend

  Yes. No problems.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• After update to 5.0.15 server, can not activate the OD service and the Profile Manager

  Hi, I have recently updated my Server 5.0.15 under El capitan 10.11.3.

  After that, Service OD and the Profile Manager can be activated server GUI.

  Of course, all users on my network are missing from the list of users; just local users remain.

  Reason: cannot be connected to the node 127.0.0.1

  How can I recreate an OD without use of app server?

  Thank you.

  P. S.

  Of course, even in the local server translates users preferences pane not connected.

  Many Open Directory problems can be solved by taking the following measures. Please test after each of them that you have not already taken it and back up the data before making any changes.

  1. the OD captain must have a static IP address on the local network, not a dynamic address. It must not be connected to the same network with more than one interface; for example, Ethernet and Wi - Fi.

  2. you must have a working DNS serviceand the host name of the server must match the FQDN name. To confirm, select the server by its name in the sidebar of the window of the server application, and then select the Preview tab click the button change on the host name line. The access that your sheet of server, the domain name must be selected. Change the host name, if necessary. The server must have at least three levels (for example, "server.yourdomain.com") name, and the name must not be in the top-level ".local" domain, which is reserved for Hello.

  3. the main DNS server used by the server must be itself, unless you use another internal DNS server. The only DNS server on the clients should be internal, they should get from the DHCP server, as appropriate.

  4. If you have accounts with basic network directories, make sure that the URLS are correct in the user settings. A return status of 45 from the demon authorizationhost in the newspaper may mean that the URL for the installation directory was not being updated after a change in the host name or the file sharing protocol (AFP, SMB, or vice versa.) If the server and the clients run all OS X 10.10 or later, directories should be shared using SMB instead of AFP.

  5. follow these instructions to recreate the Kerberos configuration on the server.

  6. If you use authenticated connection, check the validity of the certificate of the master. The common name must match the host name and domain name. Unselection and then reselect the certificate in.app was reported to have an effect in some cases. Otherwise, delete all certificates and create new ones.

  In the case of a self-signed certificate, create a trust profile in the Profile Manager and deploy it to the customers. On the server, you may need to create the folder

  /etc/openldap/certs

  and place a copy of the certificate of the server, for example:

  /etc/openldap/certs/server-name

  Also add a directive to the file

  /etc/openldap/ldap.conf

  of the form

  TLS_CACERT /etc/openldap/certs/server-name

  7 remove the link, then to connect customers in the preferences users and groups window. Use the FQDN of the master name.

  8 restart the master and clients.

  9. do not connect you to the server with the account of the user of a network.

  10 turn off the internal firewall in use, including third-party "security" software

  11. If you have created replica servers, remove them.

  12. If OD has recently stopped working while it was working before, you can be able to restore automatic backup in/var/db/backups, or a snapshot of the time of this backup Machine.

  13. If there is slapd errors in the log, try the following steps.

  Disable the Open Directory in the server application.

  Enter in a shell:

  cd /var/db/openldap

  sudo -s

  db_recover -c -h authdata

  db_recover -c -h openldap-data

  Turn on Open Directory.

  14 reset database password strategy:

  sudo pwpolicy -clearaccountpolicies

  15. as a last resort, export all users od. In the Open Directory of the server pane, delete the OD server. In some cases, you may need to use the shell to remove the server. Then recreate it and import the users. Make sure that the UID is in the range 1001 +.

• Two servers vCenter and shared storage

  Hi all

  Is it possible to have two vCenter environment, vCenter 5.1 and 5.5 vCenter and each vcenter has two esxi hosts to vCenter 5.1 a 5.1 host esxi and vCenter 5.5 has esxi hosts.

  All four hosts to access the same shared storage (SAN).

  VCenter hosts different access to the shared storage will damage the virtual machines on storage?

  Thank you...

  Essentially access a data store from multiple hosts that are running different versions. However, in the case of these hosts are not managed by the same server vCenter Server, it is your responsibility to ensure that guests will not access the same VMs (records) system and maximum supported are not outdated storage vMotion tasks, for example simultaneous for a data store...

  Also don't forget that functions like the control of storage i/o may not work as expected.

  André

• I tried to open a bookmark and its opening in an active window, such as an image, not a separate tab or window. What is going on?

  I had problems with Firefox hanging (seems related to Flash on a particular Web site). During his last hours of troubleshooting, including on the phone with the assistance of my ISP, it was recommended I "Refresh" of Firefox. I've done it before, and I did it yesterday again. This morning I opened Firefox to my homepage (my ISP Portal), checked my email, disconnected from the email, this tab closed, open two other forums and Photobucket - three tabs open in the window - to post pictures and contribute to the discussions in the forums. Once completed, I've disconnected from forums and Photobucket, each firm separately tab, and then quit Firefox. (While in Photobucket, Flash has crashed several times... but this is not unusual with Photobucket in my experience. It's a different problem, I always deal with... but he immediately forgets...) As part of "Refresh" yesterday, I set Firefox to clear the cache and cookies and other files to quit.

  Later in the day today, I opened Firefox, portal of my ISP opened as usual and expected (my "Home page"). Sometimes, instead of close the window/tab, I just open a bookmark and it will open in the same window, but by replacing the previous window and its contents. I.e. the procedure normal functioning for me. You know, rather than having two windows open where I have to close one, I have just the bookmark opens instead of the original content of the window.

  Today (and it happened before today, but rarely), open the bookmark page as if it was a picture in the active window... otherwise said, my ISP Portal occupies about 3/4 of the window, but more on the left side of the window (not another tab or a window, but in the same window) is a thin view bookmark page. This new web page - quite foreign to the original page - has a scroll down bar, but can be made to fill the window... the previously opened web page acts as a barrier to the pleasure of the 'new' image/web page. While I can understand the right border of the "new framework" and drag it to the right, he still cannot push the 'old' web page of origin of the road... the old page reached a minimum limit and I get a split screen of two completely different websites mode contained in exactly the same active window.

  The 'new' frame has an 'x' at the top right, so I could close... but my question is, why it is opened in web page/window...how from a completely different company can two web pages from completely different organizations/companies/websites are the same active window in Firefox? I have... attached screenshots. And, oh yes, not to mention that the HOW and WHY, how can you prevent (or is the best thing to just right click and open in a new tab or window...?) Which is not always convince me... I am someone who needs to know WHY something happened that should not have happened. It drives me crazy when something strange happens and the 'solution' is to change MY behavior. (You know, like if YOU were the problem, but I need to change MY behavior Instead of correct what's wrong with YOU... When YOU could make all of the obsolete situation.)

  Thanks for everything you can suss out...

  You can check this bookmark in bookmarks (library) Manager and expand the details pane by clicking the button more.

  • https://support.Mozilla.org/KB/how-do-i-use-bookmarks

• Backup and HP Recovery Manager General Questions

  I made a series of restore DVD using backup and HP Recovery Manager hear are several questions I have.

  If the restore on my hard drive partition is deleted can always restore from the DVD I made?

  I am upgrading to Windows 7 will soon be the Recovery Manager always be available for use?

  Thanks, Rich614

  richie614 wrote:
  

  I made a series of restore DVD using backup and HP Recovery Manager hear are several questions I have.

  If the restore on my hard drive partition is deleted can always restore from the DVD I made?

  I am upgrading to Windows 7 will soon be the Recovery Manager always be available for use?

  Thanks, Rich614

  Rich, Yes, the DVD can take the place of the partition.  However, I would test to ensure that they work properly before you delete the partition of the DVD.

  Yes, however, it will restore your computer to its original state.  This means that you will no longer Win 7, but programs and original OS.

• What is an application error, wmiprvse.exe? It keeps popping up all the time and its quite annoyinng. Can I get rid of him?

  What is an application error, wmiprvse.exe? It keeps popping up all the time and its pretty boring. Can I get rid of him?

  What this has to do with Windows Media?

  Rwillet,

  Thank you for visiting the Microsoft answers community.

  The wmiprvse.exe file is otherwise known as Windows Management Instrumentation.

  In research, I found a few articles that might help you:

  Windows wmiprvse.exe related errors

  Wmiprvse - wmiprvse.exe

  You can run your scan virus and if necessary, perform a System Restore to a point prior to the error occurring.

  I hope this helps.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My cd/dvd drive won't read any cd and its lack of not my computer.

  When I insert a cd it will read her, I checked whether its lack on my computer and it isn't and in Device Manager it says the drive works properly.

  Hello, Ines Alteir,.

  Thank you for your message.  Firstly, have you tried using different CD?  If Yes, are you encounter problems will be all the CDs?  If this is the case with all CD, try the following, otherwise, it could just be a damaged or scratched disc.
  Click HERE to run the Microsoft Fix It!
  If you're still having problems, you may need to go to the web site of the manufacturer of your computer and download/install the latest drivers from your computer's CD/DVD.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I get a run dll error message and its saying that something is not found

  When I restart my computer, an error message appears and it says this: C:\users\appdata\local\iboromazizofero.dll

  In addition, the computer has bad to restart

  Hello

  Cannot find this file on Google so you probably dodged some software malware and you should do a
  very thorough control. Message on how to remove the error message if still it y
  After the audits of malware.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often
  easy to detect malicious software often comes with a much harder to detect and remove the
  payload. So its best to be now too thorough than paying the high price later. Check
  with an extreme overdose point and then run the cleaning only when you are very
  that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap you start, however, you should
  also run in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• For Windows 7 and Server 2008 Windows Firewall

  Hello

  I have a Server 2008 R2 as a DC and four workstations to Windows 7 (32).  I have a requirement to have the windows firewall on the computers of Windows7 desktop and Server 2008 R2 domain controller.

  At the level of the Windows 7 Desktop, I can GPEDIT. MSC and manually add a firewall

  On the DC 2008 Server, I can add to

  1. Group Policy Management, default domain policy, firewall
  2. Group Policy Management, default domain controller policy, firewall

  But I can't get Windows 7 and Server 2008 Firewall work, 'Domain' under the network profile retains by default "Public" or "not identified."

  Any Suggestions?

  Thank you

  B

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• I bought a Xbox 350 PC wireless gaming receiver and its does not work!

  OK, so I bought it on amazon and its third party I called s DGmaxx I went to my computer and Device Manager properties and the alll such good things. I tried to connect after that then turn on remote sync by clicking on the receiver and then the controller and just keep blinking for what seem forever and then turns off ive seen on youtube people connect in as literally 2 seconds and my computer says this product IS digitally signed. I'm almost certain that it is a legit microsoft product. If it does not and no one can help me then im done with microsoft, because it is not the first question ive had with microsoft products. Help, please.

  Try Xbox support:
  http://support.Xbox.com/en-us/