Vcenter came to Enterprise and standard hosts?

Similar Questions

• While add ESXi 6 existing hosts, vcenter server 5 std and esxi host 6 cann't add to AD

  Hello

  Greetings. !

  We have seen vCloude 5 Enterprise edition and vCenter Server Standard 5.5

  at the moment all my existing hosts ESXi 5.1 are managing through vCenter Server Standard 5, now recently we buy vCloude 6 Enterprise edition

  (1) I found the following problems all add ESXi 6 hosts (VMware ESXi - 6.0.0 - Update1-3380124- HPE) to AD sales thru of sphere, it is read error.

  

  I have already set up network, DNS, make sure firewall ports, Ping - are all OK.

  (2) Moreover, while trying to create new CD, add the cluster, then add hosts, is giving following error.

  

  I can add new Hosts 06 ESXi Existing vCenter Server 5.5 Standard or I have to buy updated additional license for vcenter server 5 std vcenter 6 standard / enterprise.

  Thanks in advance.

  ESXi 6 cannot be managed by vCenter 5.5 or earlier.

  He needs a same version or higher of vCenter server.

• Best practices for backup of vCenter device and ESXi hosts?

  Hello

  I have a new VMware environment based on 5.5 ESXi and vCenter Server Appliance. A few questions:

  • What is the best practice to perform the backup of the vCenter Server Appliance? I set up the camera with the embedded SQL Express database.
  • It's recommended to backup the ESXi host or is it easier to any re - install failure?

  Best regards
  ,

  Thor-Egil

  Hello

  You can use VMware VDP to backup your device of vCenter. It is included in essentials, standard, enterprise, and enterprise as well as licenses.

  I won't have backups of ESXi servers. Restore the backup would take more time that the deployment of a new ESXi.Only thing, you may want to consider is to enable logging remotely, so you can see why the hosts failed.

  Concerning

  Tim

• Isolate the vCenter and management host ESXi5.1 of LAN traffic

  I would add two Dell switches to an existing installation, create a private management network (192.168.x.x subnet) containing the hosts and vCenter server, so that the management traffic is isolated and in no way dependent on connectivity LAN... for now that the vCenter server and the hosts are on the local network using public IP addresses.

  Is this possible with vCenter as vCenter that one IP can be configured and how should we switch be configured to allow access to vCenter from the local network via the web and customer management interface vSphere.

  Thank you very much

  Gary

  Facing your audience of LAN?  I think it depends a little bit of what looks like your LAN.  I don't think - you need not NAT your management network.  If you simply use public IPs rather than private to your internal LAN, the answer is no.  I have a client who does this same thing using 191.x.x.x for its internal network.  You try to access your network over the Internet?  It would be a different matter, and I recommend that to consult a competent network engineer.

  In short, just because you go to a public IP address range a private range of IP addresses does not mean you need to NAT.  You see NAT several times when these IP address ranges are used because they are intended.  For example, a company has a single public IP address assigned.  It uses private in its local network IP addresses.  For devices that must leave the LAN and access the Internet, you would NAT because everyone has to share this single public IP.

  Without knowing a little more, I think you'd be fine with the standard range or switching (inter - VLAN routing layer 3).

  All the best,

  Mike

  -----------------------------------------

  Remember to mark this reply 'proper' or 'useful', if you found it useful.

  Mike Brown

  NetApp, VMware and Cisco data center guy

  Consultant engineer

  [email protected]

  Twitter: @VirtuallyMikeB

  Blog: http://VirtuallyMikeBrown.com

  LinkedIn: http://LinkedIn.com/in/michaelbbrown

• Need a powercli script to create a new account a local administrator on all ESX and ESXi hosts in the vcenter

  Hi all

  If someone can help me with a powercli script to create a new account a local administrator on all ESX and ESXi hosts in the vcenter, create a role called admin and give all access except the root. This shoulb be past by a virtual centre.

  Very much appreciated to help him.

  Kind regards

  MelLvin

  I suspect that you posted your question to the wrong thread

  This requires only a minor change to the script above actually.

  Something like that

  $groupName = "group"$accountName = "user"$accountPswd = "password"$accountDescription = "A user"
  
  $esxlist = Get-VMHostforeach($esx in $esxlist){    Connect-VIServer -Server $esx -User root -Password "password"
  
      Try {      Get-VMHostAccount -Id $groupName -Group -ErrorAction Stop | Out-Null    }    Catch {      New-VMHostAccount -Id $groupName -GroupAccount | Out-Null    }
  
      $rootFolder = Get-Folder -Name ha-folder-root    Try{        $account = Get-VMHostAccount -Id $accountName -ErrorAction Stop |        Set-VMHostAccount -Password $accountPswd -Description $accountDescription -AssignGroups $groupName    }    Catch{        $account = New-VMHostAccount -Id $accountName -Password $accountPswd -Description $accountDescription -UserAccount -GrantShellAccess -AssignGroups $groupName    }
  
      $rootFolder = Get-Folder -Name ha-folder-root    New-VIPermission -Entity $rootFolder -Principal $account -Role admin
  
      Disconnect-VIServer -Confirm:$false}
  

• I just bought a ScanSnap scanner and it came with Adobe Acrobat Standard for Windows - but I have a Mac - can I get the Mac version?

  I just bought a ScanSnap scanner and it came with Adobe Acrobat Standard for Windows - but I have a Mac - can I get the Mac version?

  Hi Dcee3,

  Acrobat Standard was developed for the platform Mac Mac version is not available. It can run on a windows machine.

  Kind regards

  Anand

• Difference between Enterprise Edition and Standard Edition for Oracle RAC

  Hello
  
  In our current configuration we have CARS on standard edition and customer is now considering to go to Enterprise Edition, but not yet to decide because of the cost.
  
  Is there a difference between the Infrastructure of grid 11gR 3 Enterprise edition and Standard Edition?
  
  They told me first install Enterprise Edition and then will move to Standard Edition if they can not get the EA license, so in this case do I have to re - install standard edition network infrastructure?
  
  
  
  Kind regards
  Chirag

  994551 wrote:
  Hello

  In our current configuration we have CARS on standard edition and customer is now considering to go to Enterprise Edition, but not yet to decide because of the cost.

  Is there a difference between the Infrastructure of grid 11gR 3 Enterprise edition and Standard Edition?

  They told me first install Enterprise Edition and then will move to Standard Edition if they can not get the EA license, so in this case do I have to re - install standard edition network infrastructure?

  Hello

  There is no "grid Infrastructure 11gR 3 Enterprise edition and Standard Edition", is the only Infrastructure of grid 11 GR 2.

  On the Oracle Clusterware licenses (grid Infrastructure).
  At least one of the servers in the cluster is allowed for the Oracle database (SE1, SE or EE)
  A cluster is defined to include all machines that share the same Oracle Cluster Registry (OCR) and the drive to vote.
  http://docs.Oracle.com/CD/E11882_01/license.112/e10594/editions.htm#CJAHFHBJ

  On the licensing database.
  http://www.Oracle.com/us/products/database/Enterprise-Edition/comparisons/index.html

  Note: Oracle Real Application Clusters (Oracle RAC), is an option to Oracle Database 11 g Enterprise Edition and included with Oracle Database 11 g Standard Edition (on clusters with a maximum of 4 Sockets).
  If you move to EA Oracle, you must purchase a separate license to use the RAC option

  Regarding the Installation:
  Nothing changes on your current installation of Grid Infrastructure 11.2
  Just install a new fresh install to choose EF of the Oracle (the current clusterware) database during installation. Configure services database from this new HOME of ORACLE. Change anything on the database of all the previous backup and used functionality remains unchanged. With the help of this new House Oracle new features are enabled to be used by your databases.

  On the Downgrade:
  Step by step procedure to perform the conversion from Enterprise Edition to edition Standard [ID 465189.1]

• Oracle database Enterprise edition and standard edition one

  Hello
  is it possible to install on the same server, separate oracle database Enterprise edition and standard edition, once 11 GR 2?
  
  Best regards
  Jean-Marc
  
  Published by: jmniard on March 12, 2011 05:19

  NO.

  Listener is a specific node resource, so you should have 1 single earphone (ranging from the upper version of DB House) on a server and it will be.

• 4.1 - > 4.1 U1: vCenter update first and ESXi hosts later?

  Hello

  About the update 4.1 4.1 U1, y at - it order to follow?

  1 vSphere client

  2 vCenter & update manager

  3 ESXi hosts

  Thank you.

  It is always advisable to update vCenter Server before upgrading anything else.

  1 vCenter Server

  2. Update Manager

  3. the Client vSphere + new Update Manager Plugin

  4. the host ESX (i)

  André

• Extremely slow camera in MAX and the software response

  I am in the process of upgrading from a piece of test equipment that uses two firewire cameras.

  Currently, the software is written in LabVIEW 7.1, it uses NEITHER IMAQ and is quite catchy, with little perceptible delay in the passage between the cameras in the software. Same MAX opens up the cameras relatively quickly and you can turn on or take a few seconds of clicking cameras and quickly change between cameras.

  Without changing the external hardware to the computer, but with a new windows 7 PC in place and update the software to use OR-IMAQdx simply by replacing the IMAQ works with IMAQdx in 2014 of LabVIEW and install the latest version of MAX led the software becomes unusually slow in the passage of the cameras. When I say exceptional, I mean that it takes up to 30 years to set up and run each camera. Bearing in mind that the vision process takes 0.5 seconds or less is unacceptable. It is just as painful changing between cameras in MAX.

  I noticed that on another system that uses a camera USB 3, simply by clicking on the camera icon in MAX takes a LOT of time answering to allow you to do anything.

  On the old windows PC with MAX 5 and IMAQ clicking a camera brings the dialog boxes fairly quickly.

  Someone has an idea, what happens? Is it something IMAQdx? Of course, this is not normal?

  Can anyone offer advice please?

  Thank you

  Your post, I shared with my colleague FireWire camera (which is out of town, but regularly check the email), and here's his reply:

  Three cameras at 25 frames per second, with RGB channel separated because of the bandwidth.  We take avi and pngs simultaneously on several channels.  My suspicion is that their former Council might not be fully compliant with the standards. Not all the work of commissions, I tried a little on-site, then chose the one that is recommended by the seller.  In addition, no hubs as they can also stifle bandwidth.

  Hope it will be useful.

  Bob Schor

• I have lost my Windows XP Professionsla installation disc that came with computer and I see the message asking me to insert disk 3 to reinstall the files. What should I do?

  I lost the Windows Professional disc that came with the computer. I get a pop up requires me to insert the disc 3 of which I don't have the installation disc. Even if I try to do a system restore I need the disk. I can't lose information that is on the computer and do not have an external drive. What should I do?

  There is no disc 3 of Windows XP Professional.  Windows XP (other Media Center if I remember well) was a CD.

  Please copy the message down verbatim - including the title bar - and who post here.

  You can move this pop-up window on the side and also do all the following - in the order given anything of it periodically, you're already doing...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• recovery from RMAN Enterprise Edition 12 to Enterprise Edition, Standard Edition One 12 c

  I want to restore database of 12 c Enterprise Edition, Standard Edition One 12 c or RMAN works correctly with the version of ORACLE 12 c or you must have the same versions of the license?

  has managed to make a backup of database versions are standard 12 c and 12 c restore database Enterprice Edition using RMAN can there be problems with databases?

• How to get a virtual camera to work? the host is Lenovo W550s running CentOS 7.1, guest is Windows 7 Professional

  With VMware Workstation Pro 11 and now 12 never got 'virtual camera' to work.  Do not find documentation, only advice, this should work, exist.

  Active host computer is Lenovo W550s running CentOS 7.1.  Camera works very well in host in CentOS in the cheese.  As a removable device, it appears as "Chicony Camera integrated".  But appears later in the guest PC Window 7 Professional.  VMware Tools in the comments are the latest version, now for VMware Workstation Pro 12.

  Any chance install USB driver for camera (not found), so not excited to get 'virtual camera' to work.

  Intended use is GoToMeeting.

  What happens when you connect the device to the prompt?

  I did a test with my laptop HP - Win7 host - player 12.0

  Guest - VMware Tools Win7 updated at the latest.

  Built-in laptop webcam shows as a "Webcam Chicony HP HD"

  First image - tooltip for the player as I hover.

  Right-click the menu actions.

  After selecting the connection (unplug the host)

  When the guest saw the unit it is passed to Windows Update to search for a driver... and he did take a few minutes... but he was installing finally successfully.

  Windows features in the comments.

  And finally a picture taken with the webcam works inside the guest.

  Rob

• Solo upgrade VCenter 5.5 e non esxi host

  Ciao a tutti!

  Al momento e uso VCenter 4.1 host esxi 4.1

  I like to do solo upgrade Vcenter del went 5.5 (Gli nei mesi as host)

  Ho aperto one ticket per sapere is era possibile e mi hanno detto:

  Yes, you can upgrade your server vCenter to 5.5 and you can manage your ESXi host with version 4.1.

  Ho aperto a ticket by the licenza altro e mi hanno risposto ncosi:

  If I understand correctly, you want to upgrade the server vCenter Server to version 5.5 and want to know if the ESXi must be upgraded too.

  If you upgrade the server vCenter Server to version 5.5, then the server ESXi also need to be updated to the same version.

  Morale della favola? posso procedere con is it vcenter?

  Grazie!

  the che cerchi e risposta whichproduces VMware interoperability matrices

  MI pare che sia compatibile con he vcenter 5.5u2 ESXi fino alla 4.0.

  Perched non upgradare gli host good?

  Dai talk anche uno who VMware Compatibility Guide: search system

• VCenter, update 4.0 and 5.1 query

  We have 2 cluster esx 4.0 and upgrade to ESXi 5.1 + a physical server running Vcenter

  I have to add a new host ESXi 5.1 to this cluster, then move the computer virtual and upgrade other hosts 2 as well

  How should I start?

  1. I know my host servers and ISCSI SAN is in the compatibility list

  2 upgrade V-Center to 5.1, however more forums said some questions:

  http://communities.VMware.com/thread/428382

  3 Add the new 5.1 ESXI host and go...

  So should I I first upgraded V-Center to a more recent version, further improvements will be another weekend 2-3

  New v-Center will work with host new and old simultaneouly?

  or can there be a better plan.

  Thank you

  Here you can check the supported upgrade paths:

  http://PartnerWeb.VMware.com/comp_guide2/SIM/interop_matrix.php

  If your vCenter 4.0 is running on a 64-bit server, just put it in the ISO vCenter 5.1 installation and run the installation programs, they're going to do an upgrade. As always, read the guidelines of upgrade and to make a backup of the database before you perform the upgrade are a good idea