VCP6-CMA Blueprint

Similar Questions

• Certification valid VCP6 VTC. What are the prerequisites to go for VCP6 CMA?

  Certification valid VCP6 VTC. What are the prerequisites to go for VCP6 CMA?

  If I wish to go for VCP6-CMA, do I go training and Certification, then drive to the VCP6 Foundation, if I am the owner of VCP6-VTC valid?

  TIA.

  Rgds.

  No, you ' don't. If you have a valid secure Channel, you can take any other examination VCP or VCAP without taking a training course. For more information, see: VCP6-CMA Certification

• VCP6-Cloud vs. VCP6-CMA

  Hello

  Referencing the official VMware certification paths, http://mylearn.vmware.com/portals/certification/

  I see that you reach the VCP-Cloud you will automatically get VCP - CMA

  Are there really two secure Channel for cloud or the CMA is intended to replace the old cloud?

  Looking at the specs it looks like when the cloud one is more general knowledge and the CMA is inspired by vRealize Automation

  If I click on the name of each review, the CMA gives me details of the examination and cloud goes back to 5.5 edition (VCPC550) and loops through itself if I click on one more.

  As a technician starting with vCloud suite I find it very confusing to have two certifications in the new roadmap. There are even two VCAS, but they stand out a little more.

  If you look on the Version 6 Certification certification VMware roadmap you will see VCP6-CMA (VCP6-Cloud).  VCP6-Cloud name is obsolete, replaced by VCP6-CMA.  Paths and exams are the same, the name has changed.

• Renewal of VCP-Cloud

  I wanted to just make sure to review my VCP-cloud I have to take VCPC550 as VCPC510 and VCPC610 retire?

  I thought that VCPC610 is the last for VCP-cloud.   610 refers to VCAC 6.1?

  Thanks for the information,

  Anthony.

  VCPC610 refers to vCAC 6.1, but it's not recent exams VCP-Cloud.

  Last for now is VCP6-CMA (VCP6-Cloud).

• Want to take the certification VCP6-VTC, but I finished the 5.5 ESXi and vCenter Server 5.5

  Hello

  2 years ago I had the training for 5.5 ESXi and vCenter Server 5.5 - I wonder if that would satisfy the requirement and allows me to pass the exam VCP6-VTC?  Or should I stick with the VTC VCDP5 only?

  Have you taken after school.

  5.5 vSphere install, configure and manage.

  If so, please attend vSphere: what's new [5.5 to 6.0]

  It is a 2 day course that will allow you to take the exam VCP6-VTC.

  Otherwise, take VCP550 review and upgrade to VCP6-VTC in taking 2V0 - 621D.

  Pleaes see following URLs too.

  http://myLearn.VMware.com/mgrReg/plan.cfm?plan=12457&UI=www_cert&TRK=profile_certification_title

  VCP6-VTC Certification

• Trying to update vCAC Blueprint entity, gets "java.lang.NullPointerException".

  Hello

  I am trying to create a fairly complex workflow in vRealize Orchestrator.

  The purpose of this workflow is to clone a vRealize current/previous deployment MultiMachine Automation and mark the new clones as models and then update a plan Director multi-machine 'Ad hoc' vRA with these models new vCenter.

  Right now, I figured out how to map prints blueprint only computer individual Ad hoc, to clone new models of vCenter.

  This is done in the "VirtualMachineTemplateProperties" of each single computer model part.

  Thanks to a code borrowed Christiaan Roeleveld createiaasblueprintfortemplate package

  But because the components of the original deployment MultiMachine could were converted to the CPU and memory, I need to update the entity for SingleMachine component plans.

  I have one tries to use the workflow by default to "Update an entity of the vCAC model" for this.

  The code below is just hard code examples.

  I create a set of properties:

  theBlueprintEntityProperties =
  {
    CPUCount : "2",
    MemoryGB : "4096",
    DiskSize0GB : "20"
  };
  

  I then try to run the workflow 'Update an entity of the vCAC model' (inside my workflow of wrapper of cause), with the following entries:

  entity = theBlueprintEntity
  inputProperties = theBlueprintEntityProperties
  links = null
  headers = null
  

  But I get just "java.lang.NullPointerException".

  Correctly, this means that I need to include links or headers.

  I tried with a few links, again using package Christiaan Roeleveld createiaasblueprintfortemplate code

  But even if I include the following links:

  var links = {
    "InterfaceType": [ interfaceType ] // The vCAC Entity for the vSphere interface,
    "HostReservationPolicy": [ reservationPolicy ] // The vCAC Entity for my Reservation Policy,
    "ProvisioningGroup": [ provisioningGroup ] // The vCAC Entity for my Procisioning Group / Business Group,
    "WorkflowInfo": [ cloneWorkflow ] // The vCAC Entity for the Clone Workflow,
    "GlobalProfiles": buildProfiles // Array of build profiles, in this case just a array of one build profile,
  }
  

  I still just takes "java.lang.NullPointerException".

  Someone has a few entries on how to upgrade the vCAC entity for a master plan, with regard to the CPU, memory or disk?

  Environmental information:

  vRealize Orchestrator = 6.0.3 Build 3000581

  vCAC/vRA Pluging in vRO = 6.2.2

  vRealize Automation = 6.2.2 Build 2754020

  I found the problem.

  The problem is that the properties in the vRO inventory, for example 'VirtualMachineTemplateDescription' has an envelope has changed compared to the vRA SQL database.

  In the vRO inventory, it is listed as virtualMachineTemplateDescription ("v" in lowercase)

  But in the vRA, database SQL, it is listed as VirtualMachineTemplateDescription (capital ' V')

  And when properties are not what is in the database, the answer back is:

  java.lang.NullPointerException
  

  Here's the corrected code that updates the VirtualMachineTemplateDescription, the CPUCount and the MemoryMB of an entity of Blueprint.

  var entity = theBlueprint.getEntity();
  
  var properties =
  {
    VirtualMachineTemplateDescription : "Testing Description",
    CPUCount : 8,
    MemoryMB : 18432
  };
  
  var hostId = entity.hostId;
  var modelName = entity.modelName;
  var setName = entity.entitySetName;
  var keyString = entity.keyString;
  
  vCACEntityManager.updateModelEntityBySerializedKey(hostId, modelName, setName, keyString, properties, null, null);
  

• VCP5-> VCP6 but I'm overwhelmed?

  So my VCP5-VTC expired 31 Oct.  But I see that the review of the re-cert VCP5-VTC Delta review is available until December 31?  -What for non expired VCP5-DCVs?

  Am I still eligible to apply for permission?  I met the pre - req review VCP5-VTC (VCP510) and obviously spent.

  I could take VCP5 - VTC Delta Exam?

  Path 3 on this page holds the answer: VCP6-VTC Certification

  You are actually square 1 and should start as if you had never taken a class or prior review - pain to allow your VCP expire...

• vRA 6.2.3 - new deployment. No action of published Blueprint?

  Looking for a little help here...

  Had no chance to perform an upgrade of 6.2.1 to 6.2.3 I deployed a new instance.

  This includes a new database on a Cluster SQL 14 AlwaysOn, vRealize identity device 2.2.3.0 (last available OVF.) and the vRealize device Automation (last available OVF.)

  Deploy the 2 devices, a new Windows of 2012 which server is fully patched and running the PowerShell Script to knock out all of the required components. Identity set it up, configure the device Automation, IaaS install on Windows Server all managed.

  I then connect to the tenant default, add a new tenant, storage of identity and directors for the tenant.

  Logout and the new tenant.

  License unit

  Create users with all privileges

  Disconnect you and back in. I now see the Advanced Services (is not serious, but shows that the user has access).

  Create endpoints vRA for vCenter and vRO

  With success, collect data for both.

  Create endpoints vRO to AD and vCenter

  Create a fabric and groups of companies

  Create a network profile, the reservation policy

  Create a reservation, using the reservation policy and the configured network policy, resources are established, including the pool of memory, storage and resources for placement of workloads.

  Create a plan, (7, CentOS), its a plan Clone related to save space in the lab.

  

  

  

  As you can see above what I expect to be able to accomplish on the action plan after you have deployed.

  

  Publish the action plan.

  

  Create a service (IaaS), makes active.

  

  Blueprint is available under the catalog items.

  

  Items in the catalogue is set up, created icon, the Service and the active value selected.

  Create a right

  

  Configuration of payment is standard.

  

  Creating the service, each item in the catalog and select all Actions? Where are they all?

  

  As you can see there is no more to choose from, but miss me all the actions that have been identified in the action plan.

  '

  Action research there is nothing here?

  Can I deploy the item from the catalog successfully

  But the item selection and actions, I have nothing to do with it?

  

  Can someone please help with what after installation always something got screwed up on the original installation to experience again the same behavior by thinking baffled me.

  Thanks in advance!

  Bill

  Kumarankpl,

  First thank you for answering!

  "Call me ignorant, but saying this was a known problem with the previous version of the vCAC always ' don't would not it have been fixed in the most recent?

  I like Chan were not only to run the command but also to modify the web.config file to get the shares are available.

  Quick and dirty of it are:

  • In a high privilege command window (RunAs Administrator) replace directory C:\Program Files (x 86) \VMware\vCAC\Web API
  • Copy the Web.Config file to ensure that you have a version of failback.
  • With the help of your Web.Config Editor open choice
  • Discover it commented line:
  • Change to:
  • Save the changes
  • Perform an IISReset

  You now have access to all the missing shares.

  Thank you, Kumarankpl and Chan!

• vcp6-dtm

  Hi all

  I currently hold VCP6-VTC, VCP5-DT (valid until September 2017). so, I am eligible for the review VCP6-DTM (2V0-651) without taking any training. Please suggest

  The answer is here: Certification VCP6-DTM

  Look 2 way of tab "requirements existing candidate.

• With the help of ASD Blueprints call blue IaaS on behalf of the user

  We currently have a mixture of ASD and IaaS blueprints. I want to spend all our plans of IaaS be blue ASD that call the underlying IaaS plans. Right now my plugin vRO vRA uses a service account to connect to AVP. I have ASD plans that use the action of "requestCatalogItemOnBehalfOf". It does not work very well because the IaaS point catalogue im running on behalf of the user needs to have right at the same time the I present on behalf of the user and the service account making the request. This means that the user will see IaaS as ASD plans in the catalog. We want users to only see the plans of the ASD.

  My thought was to entitle the IaaS just the service account and plans of ASD for users. I would then just run the "requestCatalogItem" action that would provide the element of IaaS in the service business group account was in and owned by the service account. During the "stocked" stage, I would like to change the Group and the owner of the item for applicants. I see how to change the owner and group quite easily, but I do not see the link for the part storage.

  Did he do that? Any suggestions on how to approach this or just the method for updating the associated storage of the im group pass ownership of the item put into service to?

  In the event that someone comes looking, here's what I ended up doing.

  I added a service account for each of my business (the same service account for all groups) groups and he the right to all my plans of IaaS. I deleted the IaaS customers model rights so that they are entitled to the ASD plans calling plans IaaS. I configured a workflow from vRO to every IaaS model which has just one custom script to fill in the data form and the workflow "ask for a catalog item. The entries for workflows are mosly compared to your situation, however remember to ask the user name of the owner and ensure that its formatted USER@DOMAIN.

  The sauce only secret (which is not really a secret) had to pass the user name as the value of the property 'supplier - VirtualMachine.Admin.Owner '.

  It is done:

  1. The user submits an ASD plan
     1. ASD EHR Architecture has a hidden text field that has the default value field > application Info > Business Group > name
  2. The vRO workflow looks up all the catalog items that are entitled to the service named something account and checks each game to see if his right to the business of the issuer of the Group and ask for at this point in the specific catalogue. It then compiles a table of properties by using the contributions of the shape of the DSA
  3. The vRO workflow then submits a request to run the appropriate element of the IaaS catalog as service account.

  When the machine is built, it will be built in the appropriate group and the user specified in the owner field will be set as the owner. This user will have all of their normal rights.

  Its interesting that I tried to use the service account as a member of a unique group that runs the workflow "ask an article to catalogue the username". I wasn't able to get that to properly move the object in the correct business group. There may be a way to do it, but I wasn't able to find it. If you have a bit of luck with that, please feel free to comment on your success!

  Number code 2 (entries: vCACCAFE:VCACHost, everything else is only the channels)

  var items = vCACCAFEEntitiesFinder.getCatalogItems(host);
  for each (var item in items) {
    if (item.name == "Custom Template") {
    if (item.organization.getSubtenantLabel().indexOf(group) > -1) {
    System.log("Found catalog item named Custom Template entitled for " + group + ": " + item);
    break;
    }
    }
  }
  
  cpu = cpu.toString();
  memory = memory.toString();
  
  inputs = new Array();
  var jsObj = {name: "provider-custom.hostname", value: machineName};
  inputs.push(jsObj);
  var jsObj = {name: "provider-Infoblox.IPAM.defaultDnsSuffix", value: domainName};
  inputs.push(jsObj);
  var jsObj = {name: "provider-VirtualMachine.Memory.Size", value: memory};
  inputs.push(jsObj);
  var jsObj = {name: "provider-VirtualMachine.CPU.Count", value: cpu};
  inputs.push(jsObj);
  var jsObj = {name: "provider-VirtualMachine.Disk0.StorageReservationPolicy", value: storage};
  inputs.push(jsObj);
  var jsObj = {name: "provider-VirtualMachine.Network0.Name", value: network};
  inputs.push(jsObj);
  var jsObj = {name: "provider-Vrm.DataCenter.Location", value: location};
  inputs.push(jsObj);
  var jsObj = {name: "provider-custom.template", value: vm};
  inputs.push(jsObj);
  var jsObj = {name: "provider-VMware.VirtualCenter.Folder", value: folder};
  inputs.push(jsObj);
  var jsObj = {name: "provider-VirtualMachine.Admin.Owner", value: user};
  inputs.push(jsObj);
  

• VCP6 class

  Hi all

  I would like to ask, is training via vmware mandatory site or can I get training through any training centre in my country? agrees that the Center or the trainer may be accredited vmware or do?

  VCP6(vcp6-dcv) is now ready for courses and exams or even 5.5? What is the immediate cost?

  Thank you in advance.

  Go to the VCP6 review - VTC. https://myLearn.VMware.com/mgrReg/plan.cfm?plan=64178&UI=www_cert

  Go to the requirement and the slect "see the list of courses.

  and check the boot camp and choose your country it will list all the.

• Upgrade VCP510-VTC at VCP6 VTC certification

  Hello

  I got my certification VCP 510 on 14 may 2014. (expires May 14, 2016)

  What I have to reach 550 VCP Delta review first, or I can directly take the consideration of delta/beta VCP6.

  VCP550D is necessary for you to keep your current VCP5 VTC to take one of the VCP6-VTC exams without also having to be trained, so as long as you plan to upgrade to VCP6-VTC by may 2016 you can ignore VCP550D.

  Take the direction in the post above mine and look at the tab Migration paths for confirmation of your options.

• VCP5-VTC and VCP6-DT

  Hello

  I have a valid certificate of VCP5-VTC, which is admissible as 'level vcp certification valid' VCP6-DT review?

  Yes, provided that it remains current (I refer to the date limit for renewal of certification that many meet March 10)

• Why the Total cost in vCAC is Blueprint cost + cost of profile?

  one thing I noticed in end-user vCAC, it shows (Blueprint cost + profile of cost) everything by asking the service to the service catalog. Why is it so? why he is planning costs for the calculation of the daily cost?

  Cost of resources (don't) take in things account as an operating system and software licenses. These you configure at the level of the action plan, and then they are combined to provide an indicative cost for the user at the time of the request.

  Grant

• VCP - NV - NSX Blueprint tested version vs Version

  Hey people,

  All resources in the plan point to the version 6.0 of NSX and the older virtual network design guide.

  I also noticed that a lot of the community of bloggers who talk about their experience of exam VCP - NV and other resources as study guides seem to either specific 6.1, or mix and match the two (has as 6.1 only relay DHCP and Edge AREA being popular examples).   Obviously, this makes for a confusing learning experience when there are specific circumstances where a reply can be good or bad depending on version.

  So, my question is, which is just to focus on the review?  Is zero'ing of Blueprint in version 6.0 of NSX always the Gospel for which is currently being tested on the exam?

  The plan of action.