VCS followed Analyzer?
Greetings,
Is it possible within the VCS C or E, call records for billing and calls for performance analysis. I work in the health field and I want to keep track of the devices registered to the guards and how long it was a call if everything was done. Is there a way to retreat this type of information on the VCS logs somehow to push to a .csv file?
VCS is not a way to generate reports, you must use something like TMS for this. To keep track of what endpoints are registered in the VCS, there is no report to do this, so you will need to check active listings and history of the markings on the VCS itself. For CDR data, as long as the VCS or endpoints are added to the MSD, you can generate a report > Call Detail Record.
Tags: Cisco Support
Similar Questions
-
Cannot stop a USB device due to some unknown program running.
If I can't stop a device USB due to some unknown program running (like a virus), how can I find the program, so that I can stop it with the Task Manager?
Hello
The message (this device is currently in use. Close any programs or windows that might be using the device, and then try again) is usually the result of an application, file, open the document, audio or video, or any other application is being used (ranging from the USB key) when you try to remove it by clicking Remove the device safely in the notification area.
The error can also be caused if your anti-virus is actively followed / analyze the USB drive. Normally, where the withdrawal of a USB flash drive, Windows must stop all operations of reading / writing on the disk so that it can be removed safely. If this is not the case, the flash player may be damaged or lost or corrupted data. However, if Windows determines that a file is in use, it can then provide a message that indicates the volume cannot be stopped now.
So, before to eject or unplug a mass storage device, make sure that none of these activities are performed on the mass storage device before ejecting.
A cut-off device
Most USB devices can be removed and unplugged. When the fact of unplugging storage devices, such as USB flash drives, make sure that the computer has finished saving all the information on the device before removing it. If the device has an activity light, wait a few seconds after the light has finished flashing before unplugging.
If you see the icon remove the device safely
in the tray on the side right of the bar tasks, you can use it as an indication that devices have finished all operations in progress and are ready to be removed. Click the icon and you will see a list of devices. Click the device you want to remove. Windows will display a notification to tell you that it is safe to remove the device.I also suggest you make a system full scan just to be sure.Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss. -
I have pod problem of ejecting disc
This is a new generation nano 7. I'm running Vista Home Edition. I continue to get the error messages after I have sync files. Once the synchronization is complete, I try to eject the nano and I get an error message. cannott eject because the device is sharing files with other applications. Is not a happy Christmas gift. Help, please
Hi,
Welcome to the Microsoft Community and thanks for posting the question.
The message (this device is currently in use. Close any programs or windows that might be using the device, and then try again) is usually the result of an application, file, open the document, audio or video, or any other application is being used (ranging from the USB key) when you try to remove it by clicking Remove the device safely in the notification area.
The error can also be caused if your anti-virus is actively followed / analyze the USB drive. Normally, where the withdrawal of a USB flash drive, Windows must stop all operations of reading / writing on the disk so that it can be removed safely. If this is not the case, the flash player may be damaged or lost or corrupted data. However, if Windows determines that a file is in use, it can then provide a message that indicates the volume cannot be stopped now.
So, before to eject or unplug a mass storage device, make sure that none of these activities are performed on the mass storage device before ejecting.
I suggest you check in Manager tasks, if there are any processes running related to iPod.
What is the Task Manager? http://Windows.Microsoft.com/en-in/Windows-Vista/what-is-Task-Manager
If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
-
USB & external hard drive impossible security remove
Help ~ ~!
don't know what I will pass safety o cannot remove my usb or disk external hard... the pop-up message says "this device is currently in use. Close any programs or windows that might be using the device, and then try again. "
but I have already close all applications and that message still pop up
Hi lei_john,
The message (this device is currently in use. Close any programs or windows that might be using the device, and then try again) is usually the result of an application, file, open the document, audio or video, or any other application is being used (ranging from the USB key) when you try to remove it by clicking Remove the device safely in the notification area.
The error can also be caused if your anti-virus is actively followed / analyze the USB drive. Normally, where the withdrawal of a USB flash drive, Windows must stop all operations of reading / writing on the disk so that it can be removed safely. If this is not the case, the flash player may be damaged or lost or corrupted data. However, if Windows determines that a file is in use, it can then provide a message that indicates the volume cannot be stopped now.
So, before to eject or unplug a mass storage device, make sure that none of these activities are performed on the mass storage device before ejecting.
A cut-off device
Most USB devices can be removed and unplugged. When the fact of unplugging storage devices, such as USB flash drives, make sure that the computer has finished saving all the information on the device before removing it. If the device has an activity light, wait a few seconds after the light has finished flashing before unplugging.
If you see the icon remove the device safely
in the tray on the side right of the bar tasks, you can use it as an indication that devices have finished all operations in progress and are ready to be removed. Click the icon and you will see a list of devices. Click the device you want to remove. Windows will display a notification to tell you that it is safe to remove the device.I hope this helps!
Gokul - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
When I delete a flash drive, I click on the icon and select eject the disc. I get a message that t indicates that I need to close open files, but there are no open files. In the past, I just got a message that it was ok to remove the drive. What caused this display and how can I solve this problem?
Hello
Thanks for posting your query in the Microsoft Community Forums.
As described in the question, I understand that you can not remove the flash drive safely on the Windows 7 computer. I will certainly help you in this regard.
The message (this device is currently in use. Close any programs or windows that might be using the device, and then try again) is usually the result of an application, file, open the document, audio or video, or any other application is being used (ranging from the USB key) when you try to remove it by clicking Remove the device safely in the notification area.
The error can also be caused if your anti-virus is actively followed / analyze the USB drive. Normally, where the withdrawal of a USB flash drive, Windows must stop all operations of reading / writing on the disk so that it can be removed safely. If this is not the case, the flash player may be damaged or lost or corrupted data. However, if Windows determines that a file is in use, it can then provide a message that indicates the volume cannot be stopped now.
So, before to eject or unplug a mass storage device, make sure that none of these activities are performed on the mass storage device before ejecting.
A cut-off device
Most USB devices can be removed and unplugged. When the fact of unplugging storage devices, such as USB flash drives, make sure that the computer has finished saving all the information on the device before removing it. If the device has an activity light, wait a few seconds after the light has finished flashing before unplugging.
If you see the icon remove the device safely in the tray on the right side of the taskbar, you can use it as an indication that devices have finished all operations in progress and are ready to be removed. Click the icon and you will see a list of devices. Click the device you want to remove. Windows will display a notification to tell you that it is safe to remove the device.
Back to us for any problem related to Windows. We will be happy to help you. We at Microsoft try to provide our customers the best experience.
-
Hello I am trying to download an episode of my Podcast podcast connect and get this error?
Impossible to analyze your diet. Invalid XML: error on line 190: name of the "disabled" attribute associated with an element type "button" should be followed by the "=" character.
my diet is validated? http://beprovidedhealthradio.libsyn.com/RSS
It worked for my first episode? I don't know why it doesn't work for the second episode. I also use Libsyn if that helps.
Your show is already in iTunes.
https://iTunes.Apple.com/podcast/id1151562400?MT=2 & ls = 1
And everything seems fine with it and your diet. You ONLY SUBMIT YOUR FEED ONCE.
That's it - better to stay outside of your podcast connect account - only bad things happen to go there and play with things. Once again, your show is very well and is in iTunes and your flow is good with it.
Both episodes show when you subscribe - and your most recent episode appears on the page of the iTunes, general store with in 24 hours from when you posted it.
Rob W
https://iTunes.Apple.com/us/podcast/beprovided-health-radio/id1151562400?MT=2 https://iTunes.Apple.com/us/podcast/beprovided-health-radio/id1151562400?MT=2
-
Impossible to analyze the xml.aspx contained in the main.js.Iam get the following error"could not obtain XML document, and the connection has failed: status 500
My main.js resembles
xmlDataSource var = {}
URL: 'dcds. - symbianxml.aspx", etc. (sample).
init: function() {}
URL, successful reminder, the reminder of failure
This.Connect (this.) (URL, this.responseHandler, this.failureHandler);
},
/**
* Analyzes the XML document in an array of JS objects
@param xmlDoc XML Document
* @returns {table} array of objects of the device
*/
parseResponse: {function (xmlDoc)}
var chElements = xmlDoc.getElementsByTagName ("channel");
channels of var = [];
Console.log (chElements.Length);
for (var i = 0; i)< chelements.length;="">
var channel = {};
for (var j = 0; j)< chelements[i].childnodes.length;="">
var node = Sublst.ChildNodes(1).ChildNodes(0) chElements [i] [j];
If (node.nodeType! = 1) {//not an element node}
continue;
}
Channel [node. TagName] = node.textContent;
}
Channels.push (Channel);
}
Console.log (Channels.Length);
return the strings;
},
/**
Manages the response and displays the data from device web app
@param xmlDoc
*/
responseHandler: {function (xmlDoc)}
var channel = this.parseResponse (xmlDoc);
var markup = "";
for (i = 0; i< channels.length;="">
markup += this.generateHTMLMarkup (i, channels [i]);
}
document.getElementById("accordian").innerHTML = mark-up;
},
/**
Generates HTML tags to insert in to the DOM Web App.
* @index i, index of the device
@param device, device object
*/
/*
generateHTMLMarkup: function (i, channel) {}
var str ="";
"Str += '.
' onclick =-"mwl.setGroupTarget ('#accordian ',' #items_" + i + "', 'ui-show ',' ui - hide');" + ".
"mwl.setGroupTarget ('#accordian ',' item_title_ #" + i + "', 'ui-open', 'ui-farm'); Returns false; \ » > » ;
"" Str += "" + channel ['name'] + ' ";
"Str += '.";";
"Str += '.";
"Str += '."+" id: "+ channel ['id'] +" ' "";
"Str += '."+" type: "+ channel ['type'] +" ' "";
"Str += '."+" language: "+ channel ['language'] +" ' "";
"Str += '.«+ "bandwidth:" + "fast" channel + "»»";
"Str += '."+" cellnapid: "+ channel ["cellnapid"] +". "";
"Str += '.«+ ' link: '+'start the video »»";
"Str += '.
return str;
},*/
generateHTMLMarkup: function (i, channel) {}
var str ="";
"Str += '.";
"Str += '.«+ ' link: '+'start the video »»";
return str;},
failureHandler: {function (reason)}
document.getElementById("accordian").innerHTML = "could not get XML document.
'+ reason;
},
/**
Retrieves a resource XML in the given URL using XMLHttpRequest.
@param url URL of the XML resource to retrieve
@param called successCb, in the XML resourece is recovered successfully. Retrieved XML document is passed as an argument.
@param failCb called, if something goes wrong. Reasons, in text format, is passed as an argument.
*/Connect: {function (url, successCb, failCb)
var XMLHTTP = new XMLHttpRequest();
XMLHTTP. Open ("GET", url, true);xmlhttp.setRequestHeader("Accept","text/xml,application/xml");
xmlhttp.setRequestHeader ("Cache-Control", "non-cache");
xmlhttp.setRequestHeader ("Pragma", "non-cache" "");
var that = this;
XMLHTTP.onreadystatechange = function() {}
If (xmlhttp.readyState == 4) {}
If (XMLHTTP. Status == 200) {}
{if (!) XMLHTTP.responseXML)}
try {}
If server has not responded with good an XML MIME type.
var domParser = new DOMParser();
var xmlDoc = domParser.parseFromString(xmlhttp.responseText,"text/xml");
successCb.call (that, xmlDoc);
} catch (e) {}
failCb.call (, "answer was not in an XML format.");
}
} else {}
successCb.call (that, xmlhttp.responseXML);
}
} else {}
failCb.call (this, "connection failed: status"+ xmlhttp.status ");
}
}
};
XMLHTTP. Send();
}
};Please see the content in main.js is fully analyzed.
Forward for the solution to my request all members of the community...
-
How to restore or at least analyze emails from account deleted when the server no longer exists
I have emails from an email address @domain.com that are saved in my Local folder. I would like to follow the instructions to restore this account here: _ http://kb.mozillazine.org/Thunderbird: _FAQs_:_Recover_Deleted_Account
The problem is that the server that hosted email no longer exists, so I can't add it back again. Is it possible to import in Thunderbird yet, so I can always analyze them? Or someone has a suggestion on how I can access these emails in a simple way? I need to be able to search through them, as I already do in Thunderbird.
In general, in IMAP, all your messages are stored on the server and Thunderbird downloads the temporary copies in order to accelerate the search and navigation. Since there are parameters for the amount of content in the message to download, or only the headers, there is no guarantee that you will have messages in their entirety.
For future use, if you have an IMAP account that is connected and the desire to preserve the independent messages from the server, you must copy them to a place outside of the IMAP account folders connected, such as local folders.
-
Google Cloud Print setup - impossible to analyze the capabilities of the printer
I am trying to add my CP1525nw to Google Cloud Print as a Cloud, and not as a LOCAL printer printer, however every time that I add my eprint email I get the following message. "Impossible to analyze the capabilities of the printer" - I tried for public and private use for eprint settings with no luck.
Any help would be greatly appreciated. I tried the reset email with no luck...
EDIT - 01/04/11:
I chatted with HP support, and although the representative was extremely courteous, they could not help me. The support agent assured me that the matter would be taken at a higher level and looked so I hope that we can have a resolution here shortly.
EDIT - 04/04/11:
Received a response from the original HP rep that I chatted with online. In short, it was not able to find a solution and States, that the question will be sent upwards to the highest level of technical support from HP... We shall see.
EDIT - 05/25/11:
After 2 months of waiting, HP has corrected the problem. Don't forget to upgrade to the latest firmware and check all the settings before continuing.
The fix came from the side server - this defiinitely had nothing to do with the firmware. I've updated on Monday for the latest on the HP website and it was still not working. The gentlemen of tech support that helped me sent me an email a few hours after we talked, saying the sea a fix was to come.
Nevertheless, I am happy without worrying how the fix is here!
It took only 2 months to fix, but I'm glad it is.
-
Trying to submit a new podcast, I get the error "unable to analyze your diet." What does that mean?
Trying to submit a new podcast, I get the error "unable to analyze your diet." What does that mean?
There is nothing else with the error (I see references to problems with the exact lines of the RSS, but I don't get everything). RSS feed works fine in a different podcast player.
Here's the .xml file:
http://www.iTunes.com/DTDs/Podcast-1.0.DTD"version ="2.0"> Podcast of Mo http://psychicreform.com/mosports/
en - us ℗ & © 2016 MB Podcast This podcast addresses all kinds of sports, but especially of college sports with a focus on the United Kingdom and uofl's of baseball and basketball, Arizona Cardinals football and baseball for the St. Louis Cardinals. Did I mention Mr. Overbey do not use notes or have a computer to access the internet? MO Episode 6 http://psychicreform.com/mosports/160208-006-MoSports.MP3' length = "4540370" type = "audio/mpeg" / > http://psychicreform.com/mosports/160208-006-MoSports.MP3 Saturday, January 9, 2016 17:00:01 CEST MO Episode 5 http://psychicreform.com/mosports/160205-005-MoSports.MP3' length = "32525946" type = "audio/mpeg" / > http://psychicreform.com/mosports/160205-005-MoSports.MP3 Saturday, February 6, 2016 17:00:01 CEST MO Episode 4 http://psychicreform.com/mosports/160112-004-MoSports.MP3' length = "57652357" type = "audio/mpeg" / > http://psychicreform.com/mosports/160112-004-MoSports.MP3 Wednesday, January 13, 2016 17:00:01 CEST MO Episode 3 http://psychicreform.com/mosports/160104-003-MoSports.MP3' length = "46250012" type = "audio/mpeg" / > http://psychicreform.com/mosports/160104-003-MoSports.MP3 Sunday, January 10, 2016 17:00:01 CEST MO Episode 2 http://psychicreform.com/mosports/151230-002-MOSports.MP3' length = "62485146" type = "audio/mpeg" / > http://psychicreform.com/mosports/151230-002-MOSports.MP3 Sunday, January 10, 2016 17:00:01 CEST MO Episode 1 http://psychicreform.com/mosports/151225-001-MOSports.MP3' length = "35638537" type = "audio/mpeg" / > http://psychicreform.com/mosports/151225-001-MOSports.MP3 Wednesday, December 30, 2015 17:00:01 CEST Please always post the URL of your feed, not its content. I'm assuming that your workflow is the one mentioned in the tag "atom: link".
http://psychicreform.com/mosports/mosports.XML
Feed validators are complaining that this line contains a prefix of "independent". I think it's probably because in the second line, "rss.xlmns" it does not mention "atom", only "itunes" - the URL in this line indicates the feed reader RSS how to interpret the tags for this application. Without link for 'atom', the tag is meaningless to readers, and it is marked as an XML error, which is enough to cause the feed unreadable. There is no need to have this line (Atom is a very old RSS reader which I doubt anyone uses now) and you'd better remove that line altogether, either that or somehow insert the URL of the atom, which seems to be "xmlns:atom ="http://www.w3.org/2005/Atom"" so that the second line would read as follows: "
http://www.iTunes.com/DTDs/Podcast-1.0.DTD"xmlns:atom ="http://www.w3.org/2005/Atom"version ="2.0">" You will need to take one or the other or the feed will continue to be unreadable.
-
Power (WT3000) on Ethernet Analyzer
I am currently looking to 2014 SignalExpress allows to acquire a power Analyzer Yokogawa WT3000 data. I found the IVI drivers for this instrument here, but it includes only the pilots of series and GPIB. I'm trying to communicate by Ethernet.
I could add the instrument to MAX (network devices-> create new VISA TCP/IP resource-> manual entry of Raw Socket with the IP and port 10001), and the device can be seen. However, when I try to acquire data in SignalExpress (acquire signals-IVI > acquire-> IVI brought acquire-> Create new sessions with device driver TCP MAX and niScope) I get the following error:
"Configuration error: information about the inadequate location or the device or resource is not present in the system."
Any thoughts? I am fairly new SignalExpress and have never used the front IVI drivers, so it is possible, that I'm missing something. Or maybe it's just the fact that only GPIB and series are supported? Is it possible for me to convert the pilot as well as Ethernet is supported?
For anyone who is struggling with this problem, I found a temporary solution. SignalExpress supports the IVI (and non-plug-and-play drivers) drivers only because I wrote a LabVIEW VI that uses the provided Yokogowa plug-and-play driver to query the WT3000 data and then publishes these data to shared variables. SignalExpress can then read these shared variables instead of directly read data from the instrument.
-
HP ENVY 700-330qe CTO desktop: HP has encountered an error when trying to analyze your product
When I connect to HP support, correctly identifies my PC (HP Envy 700-330qe CTO Desktop), but trying to find the recommendations of the exceptional software, I get a message "HP has encountered an error when trying to analyze your product".
It was working before and I used it to identify and install a number of revisions of software in circulation.
Subsequently, he developed the above error. Is this just an artifact because I have all of the pending software elements recommended to install?
Hi there @Scotsman101,
Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are having problems with a sweep to get recommendations for the software HP Support site. I'm happy to help you with this.It is possible that it was a small problem because there are updates on the forums and other parts of the website last week. It still happens?
An alternative to this method is the HP Support Assistant, which includes several other tools. Please see the following pages where you can find the software and instructions on how to use it.
HP Support Assistant
HP computers - using HP Support Assistant (Windows 10, 8, 7)
HP PC - troubleshooting HP Support Assistant (Windows, 10, 8)Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.
-
VI Analyzer: reentrancy and USR test
I am developing a test of custom parser VI, following the steps given here: design a VI Analyzer Test custom, that will check the status of reentrancy a VI. If it is reentrant - I then want to check for all while loops with uninitialized records the SHIFT (USR) or feedback on the block diagram nodes and compare that with the type of reentrancy (share clones and allocated in advance). If there is the USR or feedback nodes and type of reentrancy is clones part I want to point out that as a failure. It is easy check the reentrancy and type using VI server, shown VI extracts below, but I did not understand how to test for nodes of the USR/Feedback. Maybe there's a GObject property.
If a returning VI manages the data of the State between calls and share the clones then there is no guarantee that the State will be kept appropriately between subsequent calls when a first level VI calls in several places. Excellent article by Brian Powell on LabVIEW log field found here: http://labviewjournal.com/2012/02/maintaining-state-1/.
Any help would be greatly appreciated since it comes from a customer who wants to use this criterion of thousands of VI s rather than opening each one and control... Thank you.
Instead of writing your own essay, can you use the test environment VI questions (in the block diagram > category warnings) of the VI Analyzer Toolkit to verify this?
If for any reason any test of the expedition is not what you need, you can view its source code here:
\project\_VI Analyzer\_tests\Block Diagram\Warnings\Reentrant VI Issues. llb\Reentrant VI Issues.vi None of the screws for this test is protected by password (in LabVIEW 2011), so you can see the script code I used to find the shift uninitialized registers and not initialized comment nodes. Let me know if you have any other questions.
-
Where is the VI Analyzer Config to get examples of LabVIEW?
Hey all the world, nor week 2016, Fabiola Delacor mentions that somewhere an example that Darren post the .cfg file OR uses for VI Analyzer for their own examples they create. I've searched and cannot find, anyone know where it is?
Hello ChrisK88,
The following link can help you find some resources more to use VI Analyzer.
https://decibel.NI.com/content/groups/VI-Analyzer-enthusiasts
Darren is the owner of this group and probably has other useful information on this page. You can transfer your question here, and engineers followed this page would be more familiar with this application.
-
Sequence Analyzer rules: Expressions must evaluate to a value of the expected type
Sequence Analyzer reports all sorts of errors because I'm indexing of the results list.
- For example: error in argument 2, 'Locals.ResultList [Locals.idx] .status is 'Error',' in the call to the function of the expression "AnyOf. Name of variable or unknown property 'Locals.ResultList [Locals.idx].status'.
This is perfectly valid at run time but the parser recognizes that, probably because the list starts with the vacuum.
Is it possible that I have clean code to reduce these error reports?
I tried to create a "Result" element in a Foreach loop, but could not find a type of 'Result' anywhere.
- In addition, under the same article, array off limits. index is given as a problem when I define a table instead of 0.1 1.2 terminals so that I can use buttons hit on the index in the array.
It's also quite correct but marked as an error.
- Another rule that makes me crazy is all sequences of escapement used in expressions must be valid, for example:the expression "StationGlobals.RootPath & ' Configuration\VP Automated Test parts and limit Config.txt" ' is meant to be a path. "Use '-' instead of"."
I don't know what, if anything, I should fix in the string because this file get opened correctly.
Can someone suggest ways to "fix" or "clean" these errors? I would prefer not to have to justify why I do nothing on errors reported by the parser to my QA group.
You can avoid the error of the Analyzer by something similar to the following:
Locals.AnyErrors = PropertyExists ("Locals.ResultList [" + Str (Locals.idx) + "] .status")? (Locals.ResultList [Locals.idx]. GetValString("status", 0) == "Error"): false
To create a copy of the item as a local variable, you can do the following:
Locals.SetPropertyObject ("myelementVar", PropOption_InsertIfMissing, Locals.ResultList [Locals.idx]. Clone ("", PropOption_CopyAllFlags |) PropOption_DoNotShareProperties))
Note that this property will exist only at run time, if you create a placeholder variable in it to change time and it will get replaced by this expression during execution.
Hope this helps,
-Doug
- For example: error in argument 2, 'Locals.ResultList [Locals.idx] .status is 'Error',' in the call to the function of the expression "AnyOf. Name of variable or unknown property 'Locals.ResultList [Locals.idx].status'.
Maybe you are looking for
-
I have a MacBook Pro about 5 years, and I just installed El Capitan.
-
Drive necessary recovery for Tecra M4 (PTM40E-OFG0287K)
Hello I need a restore disk for my * TECRA M4-PTM40E *.It is no longer available for sale of Toshiba, so I hope that someone here has a copy I can buy. I look forward to your responses. eX
-
Formatting of your desktop with windows 8 oem
I have a Hp Envy H8 1559 http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03668430-9 I recently put to the power supply and the video card but also added a PCI Wireless (ac) the id of the card WiFi mini pci low profile for a portable c
-
Bad BIOS for m7667c Desktop Update
Background:I have an HP Pavilion m7667c a Media Center Pc, Prod/system #: RC643AAI was trying to update the BIOS by HP before orientationtry an upgrade to VISTA from Windows XP Media Center Edition 2005.The update of the BIOS was not good and now the
-
Remove the key only to eject the dvd, they will not delete
I have a Samsung 700 PC series laptop with a Matshita UJ8A7AS drive. I have informed keyboard option, it has Win7 home premium 64 bit. The DELETE key was 2 options, DELETE the key worked to remove items highlighted or selected. In the text, he would