VCS 'OLD' device and device New VCS cluster "(CE500)" ""
Hello.
An easy question, can you do a VCS cluster between the 'old' and the 'new' device? is there a limitation?
In the prerequisites, I saw some VM 8 hearts, but do not understand a lot.
Thancks! An optimal day
Hello Alex.
As long as the VCS platform is the same (physical or virtual) and running the same versions of software and complete you the prerequisites. See Maintenance and creation of VCS Cluster Deployment Guide for more information.
The part on the cores is related to your virtual deployments, so if you use virtual VCS, he wants to make sure that you use the same size of deployment noticed on pg 4 of the installation Guide for the VCS VM. You don't have to worry about this with the hardware appliance.
Tags: Cisco Support
Similar Questions
-
Firefox 8 ads make it look good with all the possibilities. But when installed it's like the old Firefox and the news is simply not there. Why bother to install the most recent?
Right-click the menu bar and uncheck the option menu bar.
-
I have photoshop on my old computer and my new computer. How to transfer photo files / scanned so that my links to albums and individuals will be kept?
Duplicate the file system tree that you have on your old computer to your new computer. Use your home network to access your old computer to your new computer drive and just copy the files required for your new computer and disks that are the same driver on the new machine you letter.
-
Get the old value and the new value based on the date
Hello
I have a table called list created below with the rest of the insert statements.
CREATE TABLE ROSTER
(
NUMBER OF ROSTER_EMPLOYEE_DEF_ID
NUMBER OF EMPLOYE_ID
NUMBER OF DEFINITION_REGION_CODE
NUMBER OF DEFINITION_DISTRICT_CODE
NUMBER OF DEFINITION_TERRITORY_CODE
START_DATE DATE,
END_DATE DATE
)
INSERT IN THE LIST
(ROSTER_EMPLOYEE_DEF_ID, EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE)
VALUES
(1,299,222,333,444, 'JUNE 1, 2011', 30 JUNE 2011 "")
INSERT IN THE LIST
(ROSTER_EMPLOYEE_DEF_ID, EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE)
VALUES
(2,299,223,334,445, "1 JULY 2011', JULY 20, 2011" "")
INSERT IN THE LIST
(ROSTER_EMPLOYEE_DEF_ID, EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE)
VALUES
(3,299,224,335,446, 'AUGUST 1, 2011', AUGUST 30, 2011 "")
INSERT IN THE LIST
(ROSTER_EMPLOYEE_DEF_ID, EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE)
VALUES
(4,300,500,400,300, 'JUNE 1, 2011', JUNE 20, 2011 "")
INSERT IN THE LIST
(ROSTER_EMPLOYEE_DEF_ID, EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE)
VALUES
(5,300,501,401,301, "1 JULY 2011', JULY 20, 2011" "")
In the table above we have columns like
EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE
The result I'm looking for the table above is based on the employe_id OF start_date AND end_date
I need to get the OLD_DEFINITION_REGION_CODE and the NEW_DEFINITION_CODE
Similarly, OLD_DEFINITION_REGION_CODE and the NEW_DEFINITION_REGION_CODE
and OLD_DEFINITION_TERRITORY_CODE and the NEW_DEFINITION_TERRITORY_CODE
I need to get a row of data for each employee saying old value and the new value
for the employee 299 there are 3 records he puts the new record which is the latest date is to say beginning August 1, 2011 and end date of recordings old 30 August 2011
beginning July 1, 2011 and July 20, 2011
For the data in the table above, I need to get the data as below
EMPLOYE_ID OLD_DEFINITION_REGION_CODE NEW_DEFINITION_CODE OLD_DEFINITION_REGION_CODE NEW_DEFINITION_REGION_CODE START_DATE END_DATE
299 223 224 334 335 20 JULY 11 30 AUG 11
300 500 501 400 401 20 JUNE 11 JULY 20, 11
Please suggest me to get the result above, based on the data. Please let me know if my messages are not clear
Thank you
SudhirSELECT EMPLOYEE_ID, OLD_DEFINITION_REGION_CODE, NEW_DEFINITION_REGION_CODE, OLD_DEFINITION_DISTRICT_CODE, NEW_DEFINITION_DISTRICT_CODE, OLD_DEFINITION_TERRITORY_CODE, NEW_DEFINITION_TERRITORY_CODE, START_DATE, END_DATE FROM ( SELECT EMPLOYEE_ID, ROW_NUMBER() OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE DESC) RN, LAG(DEFINITION_REGION_CODE) OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE) OLD_DEFINITION_REGION_CODE, DEFINITION_REGION_CODE NEW_DEFINITION_REGION_CODE, LAG(DEFINITION_DISTRICT_CODE) OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE) OLD_DEFINITION_DISTRICT_CODE, DEFINITION_DISTRICT_CODE NEW_DEFINITION_DISTRICT_CODE, LAG(DEFINITION_TERRITORY_CODE) OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE) OLD_DEFINITION_TERRITORY_CODE, DEFINITION_TERRITORY_CODE NEW_DEFINITION_TERRITORY_CODE, LAG(END_DATE) OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE) START_DATE, END_DATE FROM ROSTER ) WHERE RN = 1 / EMPLOYEE_ID OLD_DEFINITION_REGION_CODE NEW_DEFINITION_REGION_CODE OLD_DEFINITION_DISTRICT_CODE NEW_DEFINITION_DISTRICT_CODE OLD_DEFINITION_TERRITORY_CODE NEW_DEFINITION_TERRITORY_CODE START_DAT END_DATE ----------- -------------------------- -------------------------- ---------------------------- ---------------------------- ----------------------------- ----------------------------- --------- --------- 299 223 224 334 335 445 446 20-JUL-11 30-AUG-11 300 500 501 400 401 300 301 20-JUN-11 20-JUL-11 SQL>
SY.
-
Keep old links and add new links to the title page of the document
I was given an interactive pdf to update. The work on the title page insrtucts the Viewer to click on a highlighted product to a product page in the document... The revised document that ancient works of art and the links will remain in the same place, but other products have been added that will be tied to additional product pages. So I have to change the basic art, is it possible in Acrobat to replace the old work base with new art without distrubing the former basic links?
Links are a form of markup. Create the page PDF of the work. Open the old PDF (or better a copy), then replace pages allows you to replace the basic document page. The markup should not be affected.
-
To get the old value and the new value
create table test (ID NUMBER,
Number of REV,
Number FIELD_ID,
FieldName varchar2 (200),
ACTION varchar2 (50).
Field_value varchar2 (200),
MODIFIED_BY varchar2 (50).
Date MODIFIED_DATE);
Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1007,283,12,'status','UPDATE','Started','2002',to_date('13-DEC-13','DD-MON-RR'));
Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1007,224,12,'status','UPDATE','preview','2002',to_date('12-DEC-13','DD-MON-RR'));
Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1007,290,12,'status','UPDATE','revision','2002',to_date('14-DEC-13','DD-MON-RR'));
Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1008,283,12,'status','UPDATE','Started','2002',to_date('13-DEC-13','DD-MON-RR'));
Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1008,224,12,'status','UPDATE','preview','2002',to_date('12-DEC-13','DD-MON-RR'));
Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1008,290,12,'status','UPDATE','teststat','2002',to_date('14-DEC-13','DD-MON-RR'));1007 283 12 status of started the UPDATE 2002 13 December 13
1007 224 12 status update overview 2002 12 December 13
12 290 1007 State review UPDATED 2002 December 14, 13
1008 283 12 status of started the UPDATE 2002 13 December 13
1008 224 12 status update overview 2002 12 December 13
1008 290 12 intensified status 2002 Update December 14, 13I need to Get for each id for each field Ineed to get the old value and new_value.
Planned result for the simulacrum of the data is:ID FIELD_NAME ACTION OLD_FIELD_VALUE NEW_FIELD_VALUE MODIFIED_BY MODIFIED_DATE
1007 status UPDATE started review 2002 December 14, 13
1008 State updated started intensified 2002 December 14, 13
Thank you
AnnHello
9728f65c-CE79-4c28-9efb-9e76dc6eaf8b wrote:
Yes I need a production line for all id.the the last rows should be the one with the highest rev.
Then use id where I guessed a group of columns starting with id and rev in most of the places where I used modifed_date:
WITH got_analytics AS
(
SELECT id, field_name, action
LAG (field_value) over (PARTITION BY ID.
ORDER BY rev
) AS old_field_value
field_value AS new_field_value
modified_by
modified_date
rev
MAX (rev) over (PARTITION BY id)
AS max_rev
OF the test
)
SELECT id, field_name, old_field_value, new_field_value, modified_by, modified_date
OF got_analytics
WHERE rev = max_rev
ORDER BY id
;
-
Having been invited to update I clicked Yes. Update failed. I tried to update manually on the site but had to close Firefox before you start - Firefox was closed. I tried to uninstall the old version so that I could install the new le neuf-- once again asked me to close Firefox before it could be uninstalled and again, it was already closed. Stuck now - no idea what it takes to get the new version. O.
Hi Jean Claude,
Firefox can always run in the background. This happens sometimes. I suggest that you try to restart your computer, and then try to uninstall the old version. Alternatively, you can try to right click on the task bar, then opening the Task Manager. This will show you the list of processes currently running on your computer. If Firefox is running, you can manually kill the process.
There is also an article in the Knowledge Base containing information on what to do if the How to resolve the failure of the update of Firefox update error message. There is lots of useful information here.
Hope this helps!
-
After the password reset. Able to connect with the old and the new OAM password.
Hi all
I have it here's the installation program.
OAM - 10.1.4.2.0 (BP08)
OVD - User store
Advertising - Store configuration and policy.
Here's the scenario.
I have a user (spokuri) OAM with the password (Oracle123) and im able to connect with these credentials.
But it's when I reset the password for Oracle1234 for spokuri using the administrator credentials.
Next time, when I try to connect with these credentials(spokuri/Oracle123) should not allow me to open a session to the User Manager since I changed the password to Oracle1234. Am I rite?
But, it allows to connect to the User Manager with the old password and the new password.
Please let me know your comments.
Thank you and best regards,
Siva NAKI.Hi Siva,
If the announcement is you user store (even through OVD) then this could be a function of Microsoft:
http://support.Microsoft.com/kb/906305/en-us
Kind regards
Colin -
How can I change mobile devices (new phone) - remove old and new sync?
I have a new mobile phone, so there is a new unit i.d. number. How can I replace the ID old number with a new one in LR 6 (CC), desktop application? And I have to re - sync all collections? Have not been able to find info on this in the help files, but not for lack of trying.
Phone is Android; computer is running Win 7.
Thank you.
Gail
Could you please delete the folder of Photos imported from the dashboard folder from the old phone.
Please put paused since Lightroom desktop synchronization then sign out of Lightroom Mobile.
And close Lightroom on your computer.
Also, please trash the Sync.lrdata file from the following location: / Users / / Library/Caches/Adobe/Lightroom/Sync Data / Sync.lrdata
Once this is done, please open Lightroom, start synchronization Lightroom of office and re connect to Mobile with Lightroom and then try to sync the collections.
-
Hello
I have created a DNS SRV to configure in the FULL of the VCS Cluster domain name.
The problem is when devices try to enroll in the VCS Cluster; I put in the endpoints, in Gatekeeper registration DNS or IP address of the DNS SRV but the always end points will never reach the cluster of VCS.
I check the logs in DNS SRV and I don't see any request from devices.
I think I need to create a virtual IP address with DNS with load balancing, I mean: IP/DNS (FQDN) for the Cluster with load and balance when devices trying to connect to the cluster's IP/DNS it transmits the request to an IP or host name of a host in the cluster.
DNS cLuster
23.1.0.201 (vcs.xxx)
The peer of the cluster:
23.1.0.32 (vcscontroltc.xxx) Master
23.1.0.33 (vcscontrolvag.xxx) slave
XXX--> field
Is this right?
Thanks in advance.
Best regards.
Hello
then 23.1.0.201 is the IP address of your DNS server?
How you need to configure is:
FULL of the cluster domain name: vcscluster.domain.local
VCS counterpart A: vcscontroltc.domain.local
VCS counterpart B: vcscontrolvag.domain.local
With the above assumptions, that's what you create in DNS:
-For the FULL domain name cluster, create two A records for vcscluster.domain.local one pointing to 23.1.0.32 and the other pointing to 23.1.0.33. With that, I recommend that you enable alternate on your DNS server.
-For each peer, create a record, so vcscontroltc.domain.local points to the points 23.1.0.32 and vcscontrolvag.domain.local to 23.0.1.33.
-Create SRV H323 and SIP records for vcscluster.domain.local. With that, I recommend that you create two SRV records for each service, pointing A Exchange and showing a B counterpart, with a weight and priority. For example:
_sips._tcp.vcscluster.domain.local-> vcscontroltc.domain.local, priority 1, weight 50
_sips._tcp.vcscluster.domain.local-> vcscontrolvag.domain.local, priority 1, weight 50
If you follow the advice above, you should be able to configure all of your interior SIP and H323 endpoints with a h.323 gatekeeper address/SIP proxy address, of vcscluster.domain.local and endpoints must enroll in one of the peers, regardless of whether endpoints supports DNS SRV.
If the domain that you use is public, you also want to add the SRV records for that domain name. These SRV records must point to your VCS Expressway, to ensure that incoming calls from URI function as it should. For example:
_sips._tcp.domain.local-> vcse.domain.local, priority 1, weight 100
If you have several VCS-E you can adjust the SRV records accordingly.
Hope this helps,
Andreas
-
I had a linear new extreme connection (connected to the wireless model Cat5) related to the old extreme then Express (newish).
I would have put in place using airport Utility (for example) 4 years ago and has worked well.
I changed my wireless modem (formerly broken) but cannot now reconnect the old extreme and express to the extreme again.
The extreme new connects to internet just fine as long as it is in Bridge mode (does not work in DHCP/NAT mode).
My real question is the utility software Airport now seems not to recognize the Express extreme or old old to get re-connected.
The manual of Apple still shows configurations using the old utilitarian approach Airport (with each unit sitting on LHS page)
If you're still using OS X (10.5.8)... as, you enter in your profile information... then the AirPort Utility in this operating system must be able to recognize the old AirPort Extreme and Express.
However, if you have updated to a new operating system such as the Mountain Lion (10.8.x), Mavericks (10.9.x), Yosemite (10.10.x) or El Capitan (10.11.x)... and... you have more "round" or version 'dome' in the form of AirPort Extreme, and an old version of the AirPort Express A1084... so, the new version of AirPort Utility is not compatible with older airports.
So, this would help a lot if we could get clarification from your part...
(1) what operating system you're using now? If you are not sure about this, click on the Apple icon in the upper left corner of the screen, then click on about this Mac and post back with the Version of OS X number that you see there.
(2) what version of the AirPort Extreme you may have. Is it a 'rounder', or 'dome' in the form of version... or... The "flat" or "square" version? If you have flat or square version, the number of model of the device is required. It is on the lower part of the airport, probably integrated in the base of carpet of MOSS. The model number starts with an 'A' follow-up of four digits. Please post back this information.
(3) what version of AirPort Express you have? Please look for the model number on the side of the Express. It is difficult to see, with grey lettering in a certain context, so you need to perhaps good lighting and glasses to discern the number of reading. As extreme, the Express, model number starts with an 'A' followed by four digits. Please post back this information.
Once we have the information we need, we know more about how to proceed from this point.
-
Merging 2 iTunes - an old pc and the other on a new iMac libraries
HHello everyone,
hope led someone can help with this one.
I'm trying to transfer iTunes library to an old windows to a new iMac pc.
It's difficult because the pc has been and is still the host for an iPad, while the new iMac has already been connected to an iPhone. The two devices have the same account, which means that the backup of the iPhone to the imac has already led to a library which is very similar to that of the old pc. But of course the iMac does not accept the full connection with the iPad.
So, I have to merge two libraries, but am afraid to loose critical data.
So far I have consolidated the library on the pc and copied to a disk external usb. What do you think that the next?
iTunes has been updated to the latest version on both systems before the consolidation.
Thanks for your help!
Hey, Keywan Bayegan.
Please visit Apple support communities.
I understand that you want to move your iTunes library from your old computer to your new iMac. There are two ways that this is possible. Here is the step by step guide that covers all the different options to move your iTunes library. You just choose the best method that suits you.
How to move your iTunes library to a new computer
I hope this helps.
See you soon
-
BlackBerry smartphone data to the PC without old device recovery
My new BB 9900 developed a fault. I have saved on my laptop computer and brought it to the O2, where he was sent for repair. It seems that my old camera is wrong me back, but replaced by a new one. I bought a new 9900 BB until I couldn't do without a phone. Can someone please tell me how do I get my information from my laptop, because I don't have the old device in order to use the function of switch-on device. Is it possible to load the data on my present 9900 without the old appliance? I'm desperate!
You should be able to.restore the backup in Desktop Manager help - don't be a swap of the device.
-
Old device restarts when you receive an order
Hey,.
I have connected 4 devices on a GPIB to USB adapter. I can see all 4 of them to the interface and 3 of them work as it should (can send commands and obtain the expected answers).
The 4th one "Programmable Pulse current Source P4000 ' society 'faster' to restart every time that it get´s a command and therefore causes a connection delay. (Also it does not remotely due to recovery).
It shows the same problem, when it is the only device connected.
The current Source is about 20 years and the company no longer exists, as we do not have a manual for this source.
There are a few old devices, which require a special order to get remotely instead of restart? Or maybe this old damaged on the gpib interface device?
Thanks for your time and help,
Tarrant
Hi Anna,.
I solved the problem. It happens with every incorrect order and for this device also * IDN? is a wrong command, because she is older that these commands has been standardized. I had the chance of finding an old program that has been forgotten by members of the Institute, where some commands when used to talk to the device and with them it works fine.
Thanks for your help anyway
Best regards
Tarrant
-
MAX does not recognize NOR-DAQ traditional (old) devices * HELP
I have a card PCIe-6259. I want to use blocks of input-output in my program .vi (read Port DIO-DIO Port writing reading Digital Line), so I installed the version of NOR-DAQ traditional (old) devices 7.4.4. But when I got to MAX (measures & Automation) and look on the left side under devices and Interfaces, I do not see the Tradional-NOR-DAQ tab; I see only the devices NOR-DAQ-mx, PXI, series and parallel system.
Then when I go to run my program I get the error: error-10401 took place in a DIO Port Config Possible reason (s): NOR-DAQ LV: the specified device is not a product of National Instruments, the driver does not support the device (for example, the pilot exited until the device has been supported), or the device has not been configured using the Explorer Measurement & Automation.
So, how do MAX to recognize that I have installed NOR-DAQ traditional (old) 7.4.4?
Thanks for the reply! I realized this too after going through the files for example... but thanks for the confirmation.
Maybe you are looking for
-
How to calculate energy consumption?
Hello I am of MMU. I have try several ways to calculate energy consumption. What is the most accurate way to calculate the power and energy. ?
-
Voltage conversion for the Module e/s-OR-5751
The only place where I can see an example of this is the example 'NOR 5751 finished several acquisition channels'. The conversion to the VI is illustrated below: It is a 14-bit digitizer, so I'm not the "16" for the resolution. The text in the examp
-
Installation Windows XP sp1 pack where to find offline?
I downloaded windows XP SP1a to update my old computer that comes from windows xp. Installation failed because it could not access server. However a message suggested that I get a version that doesn't have an online connection; where can I find this
-
So yes this message after my Win Vista Monte startsand of course I can't listen to anything on my computerwhich is a Compaq Presario V3617LA I tried to update my software to the most recent HP available as I sawthat solved the problem on two other Qu
-
Error during device driver software installation blue screen
Original title: 'Install the driver software for device' => BSOD 'Install the driver software for device' => BSOD (WD My Book World Edition II network storage) Hello I have WD My Book World edition II network storage and it worked fine with my Vista