vcsa pumps could start services. Firstboot error

Similar Questions

• The cryptographic services service could start, Windows Update, error

  The basic problem is that I am unable to run Windows Update.
  I get the error,
  "The Windows Update cannot currently check for updates because the service is not running." You may have to restart your computer. »
  The service is running, and I am able to stop it and restart.
  I crossed my event logs and was able to come up with three different mistakes that I think some research are related. I have read several forums including a few on this site that say I need to fix 50202. But I'm unable to locate this hotfix, microsoft has removed all the items that have been linked to him.
  I am running Win 7 64 bit

  ERROR 1

  The Cryptographic Services service failed to initialize the catalog database. The ESENT error is:-583.

  Description:
  The Cryptographic Services service failed to initialize the catalog database. The ESENT error is:-583.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      257
      0

  ERROR 2
  Log name: System
  Source: Service Control Manager
  Date: 07/01/2011 15:26:44

  Event ID: 7023
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: PC-user
  Description:
  The Windows Defender service terminated with the following error:
  % - 1906441657

  ERROR 3
  Log name: System
  Source: Service Control Manager
  Date: 08/01/2011 05:53:11
  Event ID: 7024
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: PC-user
  Description:
  The Windows Search service terminated with service specific error %-2147217025.
  The event XML:

  I tried you to repair the catalog database?

  http://TechNet.Microsoft.com/en-us/library/cc734083 (WS.10) .aspx

  I tried to reinstall my system with Windows 7 64-bit recovery discs from the hidden partition on the HARD drive and receive the same mistakes.

   

  Any help would be greatly appreciated.

  Here is the error I get when I run the command:
  C:\Windows\System32>esentutl/p c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1
  \Catdb - 85E5 - 00C04FC295EE}

  Utilities for Microsoft (r) Windows (r) extensible storage engine
  Version 6.1
  Copyright (C) Microsoft Corporation. All rights reserved.

  Error: access to the database from the source "c:\Windows\System32\catroot2\{F750E6C3-38EE-11
  D1-85E5-00C04FC295EE} \catdb' failed with Jet error 1811.

  Log name: Application
  Source: CAPI2
  Date: 08/01/2011 08:16:19
  Event ID: 257
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: PC-user

  I was finally able to resolve this problem.  I found the answer on another forum and it solved my problem as well.

  The error was caused by Intel Rapid Storage Technology technology program that comes with my Toshiba laptop.

  I guess the old driver did not like the new 640 GB hard drive, I installed.  Maybe it was designed only for up to 500 GB (that's the size of my old hard drive which worked well).

  Technology Intel Rapid Storage Technology program was shown in the notifications of the taskbar with a yellow exclamation point.

  As soon as I put to update this driver at latest on the Intel site, Windows Update and everything worked.

  Hope this helps anyone else having the same problem

  P thanks to Bear for all your help.

  Glenn

• Could not start service windows drivers Foundation-User-Mode Driver Framework on the local computer, error 31: a DVICE attached to the system does not work

  When I go to start the Service for Windows drivers Foundation I get the following error message, cannot start service window drivers Foundation-User-Mode Driver Framework on local computer, error 31: a device attached to the system is not functioning

  I was not able to find an answer in help

  Unless you write your own drivers for XP and using the Windows Driver Foundation Service to help you debug, you can disable the WDF Service.  It will be one less point to start your system and will not not just sitting there working day and night with nothing to do.

  On some systems, if WDF is activated, you can begin to see some errors of svchost.exe like this:

  Application error: the instruction at "0x7c91b21a" referenced memory at "0x00000010". Memory could not be "written".

  The best solution for this problem is: disable the WDF Service.

• Error: "error 1920 Print Spooler Service (spooler) could start" when trying to install the printer

  Original title: print spooler could not be started

  Trying to install a printer. Get "error 1920 Service print spooler (spooler) could start. Can you please help?

  Hi phil195golf,

  1. What is the brand and model of printer?

  Try these steps and check if the problem persists.
  Step 1: Run Microsoft Fix to diagnose the problem
  a. see you can not add a printer and you receive spooler printer in Windows XP error messages
  b. click Microsoft hotfix and run the tool successfully.
  c. restart the computer.
  d. install the printer and check if the problem persists.

  Step 2: If the problem persists, install the printer by turning off all non-Microsoft programs
  see How to configure Windows XP to start in a "clean boot" State .
  b. follow steps 1 and 2.
  c. installing the printer and check the result.

  Note: Article, remember to follow 'steps to configure Windows to use a Normal startup state. "

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Windows failed to start the service on Local computer print spooler. Error 1068: the dependency service or group could start. »

  I fiddle with my startup programs and now I have this error message: "Windows could not start service on Local computer print spooler.  Error 1068: the dependency service or group could start. "There is no printer listed everywhere and nothing works.

  Hi Jkoryzna,

  Thank you for choosing the Microsoft Answers forum.

  To solve the problem, fix the dependency for the spooler service information.

  Click Start, run and type the following text:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

  Alternatively, to achieve this by using the Registry Editor:

  Click Start, run and type Regedit.exe

  Navigate to the following branch

  HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler

  In the right pane, double-click the DependOnService value

  Delete existing data and then type RPCSS

  Close Regedit.exe.

  
  REGISTRY WARNING

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Navigate through the steps mentioned in the article below.
  Solve printing problems by resetting the print spooler.

  http://support.Microsoft.com/kb/2000007

  Let us know if this helps

  Concerning
  Anthony.

• No firewall or Internet, Windows Firewall errors: "0x8007042c" and "error 1068: the dependency service or group could start.

  Problem started when the McAfee Firewall shuts off and I could not turn it back on.  Also I can't activate Windows error 0x8007042c firewall.  Also no Internet access due to firewall restrictions.  Tried to manually turn the Windows Firewall service (as an administrator), but now get error 1068: the dependency service or group could start.  Strangely, the McAfee Firewall seems to be OK again?

  McAfee and click OK in the same sentence? Hmmm... Take a look at this site for some good information and instructions for the removal of malicious software.

  http://www.selectrealsecurity.com/malware-removal-Guide/

  I hope this helps.

• Cannot start service on local computer print spooler. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Ould does not start on local print spooler service. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Hello

  I suggest you try to launch the fixit of this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  It will be useful.

• Windows could not start the print on local computer service. Error 1068: The dependency service or group could start.

  I can't add a printer.  I constantly receive the associated printer spooler error messages and specifically "Windows failed to start printing on local computer service. Error 1068: the dependency service or group could start. "I tried to restart, tried"FixIt"MicroSoft application... all to nothing does not.  Help?

  Thank you!

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your printer issue in Vista Hardware and drivers Forum above.

  See you soon

  Mick Murphy - Microsoft partner

• Unable to connect to networks wireless on laptop Windows 7 Enterprise. Cannot start the autoconfiguration WLAN service. "Error 1068: the dependency service or group could start."

  original title: cannot start service autoconfiguration WLAN and EAP services

  I am not able to connect to my wireless network. When tried to connect, it shows just "unable to connect."

  I have the Intel WiFiLink 5100 adapter with the latest driver for Windows 7 Enterprise 32-bit installed. The laptop is not a wireless connection manager and I am trying to connect using the Windows wireless connection manager.

  I checked in the Services and found that service autoconfiguration WLAN and Extensible Authentication Protocol services are not running.

  When I tried to start the WLAN auto configuration service, I get the following error...
       Windows could not start the service WLAN autoconfiguration on Local computer.
       Error 1068: The dependency service or group could start.

  When I tried to start the service of Extensible Authentication Protocol, I get this error...
       Windows could not start the service on Local computer Extensible Authentication Protocol.
       Error 1053: The service did not demand launch or timely control.

  I found that all dependent services for the EAP are running. And all dependent services for autoconfiguration WLAN service are running except the EAP service.

  I searched the internet for the solution madly before posting here. Any help is greatly appreciated!

  Take a look at this > http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/f9b835f2-c2da-43b9-883f-2b2a157c3921

  This link has the solution that worked for me.

• Windows spooler printer 8 error 1068: the dependency service or group could start.

  Just upgraded to Win 8 ENT x 64 Win 7 ENT x 64.

  I thought, maybe I need to restart the service. Go in Services, look to the top of print spooler and select restart.
  But I get an error:

  "Windows failed to start the Service on local computer print spooler.
  Error 1068: The dependency service or group could start.

  "Okay, so I go into properties and see what are the dependencies.
  Attached image:
  

  RPC is running, however, no FAX.
  Go to Fax and just getting started. I get the error 1068
  Focus on dependencies here.
  Attached image:
  

  IM lost at the moment.
  Any help would be greatly appreciated.

  I ran sfc/scannow and found no problem.

  Please notify.

  I found this somewhere else and this fixed my problem

  I had the same problem and I have created a batch file that I have run as Administrator:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

• VCSA 6.0 was not able to start services

  Hello world

  I just installed VCSA 6.0 on my environment after the first start, I got this error on the home screen «"" cannot start service.» Firstboot error. »

  and I can ping but I can not connect via web browser, I thought that some early dosent services but I don't know how I can check it out?

  which tool is most useful? PuTTY or PowerCLI?

  You can use putty to go through the logs of firstboot. If possible, please provide the firstboot logs...

• Why is my computer is giving me an error message that says: "cannot start service on Local computer print spooler?

  Why is my computer is giving me an error message that says: "cannot start service on Local computer print spooler?

  When I tried to install my printer, I got an error 1068: the dependency service or group could start. I tried to go into my computer management to enable the print spooler service, but it gave me the same error message each time. What is the dependency service or group and how I put in place?

  Hi SimoneJ,

  Try to replace spoolsv.exe is located in C:\windows\system32 in C:\WINDOWS\ServicePackFiles\i386.

  Starting from printer spooler services (start-> Run-> services.msc-> printer spooler).

  I hope this helps.

• "Error 1068 - the device of dependence or the group could start" _

  "Error 1068 - the device of dependence or the group could start" Windows could not start the service Acquisition of Image Windows (WIA) on the local computer.

  Problem: Cannot parse documents!

  In the type of search: services

  Click on the services that is present at the top of the list of programs.

  Scroll down to purchase picture Windows (WIA).

  Double-click it, and then click the Dependencies tab

  Make sure that all services Windows Image Acquisition depends, are running

  Switch to the "Recovery" tab and replace all drop-down lists 3 "Restart the Service".

  Make sure the 2 boxes of Reset below say '1' to them.

  Click Ok.

  S.Sengupta Media Center MVP

• IaaS Service could start after update vCAC 6.0.1

  Hello

  I've updated our Infrastructure 6.0 to 6.0.1 vCAC.

  Device update IDM worked well and also vCAC device update completed without error.

  After the restart of the IaaS Service could start.

  I continued to upgrade the server IaaS components because I thought that different versions could cause problems.

  Update of components IaaS completed without errors as well.

  Then I rebooted vCAC device once more but the defective still service to start.

  

  Connected to the portal, DEM status shows the following errors:

  

  Anyone know how to fix this?

  Thank you!

  I think that the newspaper seems ok (errors are more like warnings that some notifications are not received until the services are started). According to the newspaper, it looks like that at least part of the IaaS is configured (integration of SSO works and so on). Thus, the IaaS service shows as being down because of DEMS (as you pointed out in the original post). You can also check this by going to: https://vcacVA-ip/component-registry/services/status/current and find the part "iaas-service" of the xml. It will be an error message. So, it might be that the DEM is not started. I don't remember the exact windows service name of the service DEM, but if you go to the list of windows services, you might find some vCAC services that are not started it. If this is the case, begins just services will change the status (after 2-4 minutes).

• PCMCIA wireless network card is not detected: 1058 error: cannot start service

  Help, please!

  I'm under WXP Pro for over 2 years and I've been connecting to the internet via a pc wireless card in my laptop with no problems PCMCIA slot. Suddenly last week, he started randomly disconnect and reconnect, and now it is gone completely.

  I bought a new WiFi card and still does not work. I checked the Device Manager and driver of cardbus PCMCIA works well as all other devices. The driver for the wireless card and another bound network drivers not start little matter what I try and how many times I try. I tried another laptop and my old card and once again work very well.

  The device driver I try to start have the error

  "Error 1058: the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him."

  The card driver is installed, but not from, it is as if the laptop cannot detect or see the card in the slot

  Please help; I have difficulties to find someone with the same problem after a week of searching the Web.

  Hello

  This problem may occur if the service is disabled or if the service is disabled for the hardware profile you are currently using.
  To activate the service follow these steps:

  1. click on start, point to programs, point to administrative tools and then click Services.
  2. double-click on the service that is not started.
  3. click on the tab to open a session.
  4. check that the service has not been disabled for the hardware profile that you are using. If so, click Activate.
  5. click on the general tab, verify that the service has not been disabled in the Startup Type box. If Yes, click Automatic to have it start when you start the computer.

  What is described here in the article MS knowledge base
  http://support.Microsoft.com/kb/241584