VDP file level restore gives only a blue screen in the browser

Similar Questions

• I tried to connect wifi with my laptop, including wireless I use for a month now, but shows only 2 blue screens without the world down on the right, and he said "unidentified network".

  "Unidentified network".

  Hello, today I tried to connect to my friends wifi with my laptop, including wireless I use it for a month now and its impossible! Down right it shows only 2 blue screens without the World Cup, and he said "unidentified network"! I tried several solutions, I found online as 'install the protocols Internet 4 and 6', make sure that I have the ip auto get same restore point system and safe mode with network! Nothing works... my friend connects with his laptop and I can connect with my smartphone, except my laptop! I have windows vista... Please help me thanks

  Go to: Control Panel, Manager of Devic, adapters to extend your network, click with the right button on your wireless network and click on uninstall.

  Do not put a check in the box: remove the software driver for this device.

  Restart your computer and Windows will install your wireless network.

  If the problem persists, see if your computer manufacturer has an updated driver.

  These articles may help:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://support.Microsoft.com/kb/313242

• Just install lightroom cc, when put a picture to develop a module to be only a blue screen when the preview go but everything's ok

  Just install lightroom cc, when put a picture to develop a module to be only a blue screen when the preview go but everything's ok

  

  Try to edit > Preferences > Performance and uncheck "use graphics processor.

• vDP file level restore limitations

  We test POS and file-level restore feature. We have a file server that is not part of the vCenter with WTP installed so I can't test on it. It has two 2 TB vmdk files that are grouped into a single 4 TB drive in Windows. Documentation of POS said "two or more virtual disks mapped to a single partition" are not supported. Is that what we have going on here?

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2053871

  Is that what we have going on here?

  Yes, and even if used you a single virtual drive to a partition, you will always be on a scenario that is not supported, because you use dynamic disks.

• When I try to develop my photos I get a blue screen, but the browser will display my image?

  I am running the latest version of lightroom, but I don't see my image in the pane to the point, it shows only a blank blue screen, however you can see the image on the part of the browser on the left?

  Anyone know what I am doing wrong?

  Hi andrewa.

  It seems to be a problem because of the graphics processor.

  Go to the Lightroom preferences > performance > uncheck 'use graphics processor' and then check.

  Kind regards

  Claes

• Windows XP does not start at the top and gives only a blue screen on Qosmio F20

  I'm having a problem similar to this:
  http://www.TechSpot.com/VB/topic26409.html

  The only solution for this is to reinstall/repair Windows XP Edition Media Center:
  http://www.TechSpot.com/VB/showthread.php?t=8356&highlight=Windows+repair

  It is to reinstall Windows ONLY (without formatting) the recovery came with my computer CD can not do this. Really, I don't want to format my computer, and being a sealed unit I won't remove the laptop HARD drive.

  How can I perform the procedure above with my current copy of Windows XP Media Center provided with the computer on the recovery disk?

  Thanks in advance.

  [Edited by: admin]

  You can try to repair the operating system using the XP repair console.
  But isn't the Toshiba Recovery CD contains such console because it s not an original CD of Microsoft, but it contains only an image of the files.

  So if you want, you can remove the HARD drive and connect it to another computer via external USB HDD controller.
  Then you could get access to HARD drive and could save all important files.

• POS 6.0 - file-level restore

  Hey guys,.

  I have tried the new VDP 6.0 to see if it can replace our backup solution existing and well except for file-level restores.

  I managed to get the virtual machine is saved and I know that to make a "level of restoration of files" or FLR, I have to connect to https:// < IP_of_your_VDP_appliance >: 8543/flr of the virtual machine itself.  I would like to know if I can do a restore from another machine as my own workstation?  That would make it a little easier for me or helpdesk guys perform restorations, but I can't figure out how to do this.

  Anyone?

  Nick

  Your workstation is a physical machine? Therefore, it is not part of a backup of VDP job. You can use a virtual machine that is included in a backup of VDP job to perform a restore of file regardless level login to basic or advanced. Try to add another virtual machine to the backup job, and then open a session guest virtual machine OS second and try to restore a file from the first saved VM. Keep in mind the guest OS types should be similar (Windows or Linux).

• Bose AE2w gives blue screen at the time of the twinning

  Hello Experts,

  When I try to add the bluetooth headset from Bose AE2w on my laptop (Fujitsu S760 windows 7-32 bit) it gives me a blue screen. The problem is that when pairing the headset via bluetooth, the laptop will be begins searching for updates and it ends with a blue screen. I also tried to install the latest driver for the headset but the end upward with the same question. Any idea, and advises on how to solve this problem?

  Hello samira.

  Thanks for posting your query in Microsoft Community Forum.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. Are you able to connect other Bluetooth devices?
  3. That you get a blue screen often or is that when you try to connect your Bluetooth headset?

  I suggest you try to plug the Bose AE2W headphones on another computer to rule out the possibility of a bad headphone. The steps I mean generally help diagnose the problem with the help of the automated troubleshooters and move you in the right direction to solve the problem.

  Method 1:

  Run the tool material and devices and check.

  Open the hardware and devices Troubleshooter:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  To control how your computer with Bluetooth devices pairs follow the steps.

  1. Open Control Panel by clicking the Start button, then Control Panel.
  2. In the control panel search box, type Bluetooth, and then click change Bluetooth settings.
  3. In the Bluetooth settings dialog box, click the Options tab and do one of the following:
     Pour rendre make your computer discoverable to Bluetooth devices, select the check box for Allow Bluetooth devices to find this computer.
  4. When a computer active Bluetooth device is in discoverable mode, it broadcasts a wireless signal that allows it to be detected by other Bluetooth compatible computers or devices. This is sometimes called pairing mode.
  5. To allow Bluetooth devices to connect to your computer, select the check box for Allow Bluetooth to connect to this computer devices.

  To be notified when a Bluetooth device is trying to connect to your computer, select the check box for alert me when a new Bluetooth device wants to connect.

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  Try to change the settings for the Bluetooth compatible device and check.

  Change settings for a Bluetooth compatible device device:
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  You can also check out the link below for troubleshooting

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Method 3:

  In addition to the above methods, I suggest you follow the steps in the section: Bluetooth® troubleshooting in the following link:

  http://worldwide.Bose.com/ProductSupport/en_US/Web/ae2w/page.html

  In addition, if the blue screens are common, please see the following link:

  Resolve stop (blue screen) error in Windows 7

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
  Note: Make sure that you back up the data before proceeding with the disk check.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• With server 2012 POS file level restore

  When I run a backup on a virtual machine running Server 2012 and then try to navigate this image to the file level using the Data Protection restore vSphere Client, I can't do it. I can ride with success and can see the image, but when I try to extend down to the level of the file I can't do. When I get the images running Server 2008 R2 however, I can browse to the level of the files without a problem. I was wondering if there is a problem of compatibility between the Data Protection of restoration of Client and server 2012? Also, as a quick add, I can restore a server running VM 2012 using the full image, so backups work fine on the 2012 VM server. It would just be nice to be able to navigate and file level restore. Any help with this would be greatly appreciated!

  This is probably a limitation around file systems THAT VDP currently support for FLR. Please see page 74 of the VDP Admin guide:

  http://www.VMware.com/files/PDF/products/vSphere/VMware-vSphere-data-protection-Administration-Guide.PDF

• Blue screen errors the problem points to the files Volsnap.sys or Classpnp.sys.

  Last month, I had a series of blue screens.  The problem points to the files Volsnap.sys or Classpnp.sys.

  I have a Dell Precision T3500, running 64-bit Windows 7 Prof.  The system is configured with RAID.

  Sometimes rebooting the system in the middle of the night and sometimes it freezes while I work on that.  It is during the night to safeguard and Virus scanning using Trend Micro, which is the only type of trainer of spam on the system.

  No idea on how to stop this would be really appreciated!  Thank you

  Hello

  Results verified BlueScreenView WinDBG / DumpCHK.

  TrendMicro is most likely part of this question, as it is known to have caused or
  make these problems worse. Uninstall it and run the removal tool to prevent
  remains of troublecausing. The following recommendations to use during the test,
  even better all the time.

  TrendMicro removal tool
  http://eSupport.trendmicro.com/pages/how-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  ------------------------------------------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 6.x and 4.8 x

  Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  ==========================================================

  The Bug_Checks were D1 (19 long happened if he should really
  do not be in the mix) and CAUSE volsnap.sys classpnp.sys which are
  Components of Windows, which means something else led in error.

  1. Uninstall TrendMicro as it has a role - is not enough to just disable
  such that it will still load chunks of itself in memory.

  2 Volsnap.sys is the Windows volume shadow copy driver and disk problems
  or other corruption could be at stake. Classpnp.sys is the SCSI class system
  dll checking and disk problems will affect the it. Run SFC/scannow, and then
  Checkdisk (chkdsk /f r).

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =========================================================

  Other troubleshooting methods:

  BCCode: D1 0x000000D1

  Check these KB

  Stop error when you resume a computer that is running Windows 7 or Windows Server 2008 R2
  from sleep or standby extended: "STOP: 0x000000D1".
  http://support.Microsoft.com/kb/978982

  Stop error on a computer based on Windows Server 2008 R2 or Windows 7 during operation
  system uses a storport virtual miniport driver to save a dump file or a file of hibernation: "0x000000D1.
  http://support.Microsoft.com/kb/2320550

  Those 7 other KB Articles are available
  http://support.Microsoft.com/search/default.aspx?mode=a&query=0x000000D1&SPID=14019&catalog=LCID%3D1033&1033comm=1&Res=10

  --------------------------------------------------

  Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
  methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
  programs may also cause this. Check the resolution of the problems and when you get to the pilot and sections tests memory refer to the generic methods in the next message and then returns to the resolution of problems
  If necessary.

  Cause

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

  This bug check is usually caused by drivers who used a wrong address.

  If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

  • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
  • The function call was made to a function in another pilot, and that this driver has been unloaded.
  • The function was called by using a function pointer that was an invalid pointer.

  BCCode: d1 0x000000d1<-- read="" this="">
  * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

• 2 errors cannot start the file missing PSHED.dll and a blue screen error 0x0000C1F5

  Hello

  A few moments ago I had to do a restore of the system for some reason forgotten but restoring interrupted when the power off when I tried to restart it gave me a chioce of such boot options that start normally start SafeMode etc... but when I choose one of them it is said that the PSHED.dll file is missing or currput so I put in my drive repair/install and reboot, but after the white bar has loaded and the green bar loads, it gives me a blue screen error with the info tech being 0x0000C1F5 and the rest are zero

  I have a gateway with windows Home premium 32-bit model and more recent material I instaled a grapics card xfx 9800gt nvidia and a new mouse, any help would be appreciated thanks

  -Renton

  Hello

  This error is somehow a special case:

  Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/946084

  How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer
  http://support.Microsoft.com/kb/970101/en-us

  Stop error when you start a Windows Vista-based computer, even though hotfix 946084 is installed on
  computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/958069/en-us

  Other methods:

  Workaround for STOP 0x0000C1F5 / 0xC1F5 / C1F5 / BSOD / CLFS. SYS / KB946084
  http://www.delmartian.com/nullpointers/workaround-for-stop-0x0000C1F5-0xC1F5-C1F5-BSOD-CLFS.sys-KB946084.html

  Easier to read same message
  http://BSODs.com/content/Windows-Vista-and-stop-0x0000C1F5-Linux-anyone

  SystemRescueCd
  http://SysRescCd.org/Main_Page

  Video fix
  http://www.YouTube.com/watch?v=Y_OjCkbZyTw

  Video Fix - Linux
  http://www.YouTube.com/watch?v=SwSvIhyZRVc

  ================================================

  For the most part, the BlueScreens (the above is a special case as noted)

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I stop my new laptop with Windows 7, install new updates. But now my laptop won't charge. There only dark blue screen. He won't even have to sign on the screen. Someone at - it happen?

  I stop my new laptop with Windows 7, install new updates.  But now my laptop won't charge.  There only dark blue screen.  He won't even have to sign on the screen.  Someone at - it happen?

  Hi ctgreen

  Welcome to the Microsoft Answers site!

  You can try the following and link methods under each method for more information on the same and see if one of them solve the problem.

  Method 1: Start the computer in last good known Configuration

   

  1. Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the button start , click the arrow next to the button lock , then click on restart.

  1. Do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start, and then press F8.

  1. In the Advanced Boot Options screen, use the arrow keys to select last good known Configuration and press ENTER.
  2. If your computer has multiple operating systems installed, use the arrow keys to select the operating system that you want to start using the last good known Configuration, and then press ENTER. Windows will then resume starting normally.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2: Start your computer in Mode safe

   

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click on the Start button , click the arrow next to the lock button , and then click restart.

  2. do one of the following:

  o If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  o If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode and press F8.

  3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  When your computer is in safe mode, you'll see the words Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you are able to access the desktop in SafeMode I suggest you read the article in the link below for instructions on restoring the system.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Concerning

  Varun j: MICROSOFT SUPPORT

  Visit our Microsoft answers feedback Forum

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

• Windows gives me a blue screen when I try to upgrade my Dell 650 Intel Xeon cpu (2) a 4.2 GHz to a 3.6 GHz

  Windows gives me a blue screen when I try to upgrade my Dell 650 Intel Xeon cpu (2) a 4.2 GHz to a 3.6 GHz

  Hi, I was wondering if I need different software or?   Tent for upgrade achieve performance more than one old computer.   When I turn on the computer, it starts to initialize, then turns on the blue screen, all new material that was added.   3.6 GHz was also used in the 650's.  Just by looking at the cpu they look the same to me.  Any ideas is better than what I have now.   Dell number is 4QXB451

  This isn't the site for these answers... Try intel.com/support/cpu

  Youre pc requirments are based on the chipset boards, chips intel only run with

  the default CPU.

• After backup files and restoring Windows XP, I can't open the files backed up.

  After backup files and restoring Windows XP, I can't open the files backed up. The files are password on a user account. I know the password. But the message received when you try to open them is: access is denied. Drag / drop the files in 'Shared files' result in the same message. I know that the files exist, because when I open backup and browse for them, they are displayed. Is there a method to open? I have Windows XP Media Center Edition, Version 2002, Service Pack 3 update. I tried to back up the files with backup of backup, but it does not work.

  Hi error,.

  I suggest you follow the article in the Microsoft Knowledge Base and check.

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  I hope this helps.

• I have new Dell Inspiron 15 7000 2-in-1 graphics card = Intel HD Graphics 520 only see a blue screen in the develop module is the graphics card not supported?

  I just new Dell Inspiron 15 7000 for Lightroom on road.

  Graphics Intel HD Graphics 520 =

  Only get blue screen to develop the module

  This card is not supported?

  It works as Lightroom uses is no longer your GPU for rendering of image in the develop module.

  Please see the FAQ and the troubleshooting of Adobe Lightroom GPU

  ~ Assani