With server 2012 POS file level restore

Similar Questions

• POS 6.0 - file-level restore

  Hey guys,.

  I have tried the new VDP 6.0 to see if it can replace our backup solution existing and well except for file-level restores.

  I managed to get the virtual machine is saved and I know that to make a "level of restoration of files" or FLR, I have to connect to https:// < IP_of_your_VDP_appliance >: 8543/flr of the virtual machine itself.  I would like to know if I can do a restore from another machine as my own workstation?  That would make it a little easier for me or helpdesk guys perform restorations, but I can't figure out how to do this.

  Anyone?

  Nick

  Your workstation is a physical machine? Therefore, it is not part of a backup of VDP job. You can use a virtual machine that is included in a backup of VDP job to perform a restore of file regardless level login to basic or advanced. Try to add another virtual machine to the backup job, and then open a session guest virtual machine OS second and try to restore a file from the first saved VM. Keep in mind the guest OS types should be similar (Windows or Linux).

• vDP file level restore limitations

  We test POS and file-level restore feature. We have a file server that is not part of the vCenter with WTP installed so I can't test on it. It has two 2 TB vmdk files that are grouped into a single 4 TB drive in Windows. Documentation of POS said "two or more virtual disks mapped to a single partition" are not supported. Is that what we have going on here?

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2053871

  Is that what we have going on here?

  Yes, and even if used you a single virtual drive to a partition, you will always be on a scenario that is not supported, because you use dynamic disks.

• MD3200 with server 2012

  People, everyone tested connection MD3200 with Windows Server 2012? I checked the matrix platform support on the dell website [ftp://ftp.dell.com/Manuals/Common/powervault-md3200_Concept%20Guide_en-us.pdf] to MD3200 in which nothing is mentioned about the W12. Can someone tell if they tested and I have seen performance problems.

  Hello Bhushan8805,

  Here is a link to the last matrix of support which was released on September 18,2013. FTP://FTP.Dell.com/manuals/common/PowerVault-md3200_Concept%20Guide_en-us.PDF as long as you are on the latest firmware for the MD3200 controllers which is 07.84.47.60 he is supported for windows 2012.

  Please let us know if you have any other questions.

• VDR 2.0 does not not with file-level restore Client

  I've recently upgraded to vsphere 5 and vdr 2.0. VDR works well, but the file restore client does not connect to the vdr unit. It indicates that the data recovery service is not running on the device that you connect to. If someone has experienced the same problem or there at - it a new version, if the level of restoration of customer for vdr 2.0 files?

  Thank you!

  Yes, there is a new version of the restoration at the level of the Client files in the ISO Image. You can find it in the directory: WinFLR for Windows and LinuxFLR for Linux.

  Paul

• VDP file level restore gives only a blue screen in the browser

  We have deployed the POS device a few weeks ago and except some problems it seems to do it's job base that is place backup and restore of virtual machines. But when Itried to use the level of the customer restore file web it don't work for us. On a Server Windows 2008 R2 and a virtual Windows 7 machine saved upward by the VDP, both with the latest VM tools installed, I open a browser and point it to https://VDP_IP:8543 / flr , it shows a certificate waring that I choose to accept (using the cert standard vCenter for now) and it loads a blue screen , but nothing more, and I have no connection box. I tried to restart the POS and the virtual machine, but it still doesn't work. I've attached a screenshot of what it looks like.

  We use assessment and had no assistance to open a SR.

  Anyone has any ideas or might have seen the same problem?

  I think the problem is arround the Microsoft IE. Maybe you can try with another browser, firefox seems to work.

  Hope that soon, there is a solution for this problem.

• Windows Server 2012 Standard File Sharing - access denied?

  So I have a simple Pentium Dual core server here, and I'm putting in place local file sharing. For some reason any however I can't write files on the disk, even when you sign in as administrator of any computer in the network.

  I've been Googling the problem for hours and I found something on the deactivation of the audit, I did in secpol.msc, but I tried to disable it, and it will not always grant access.

  Is something directly above my head, or is it a problem in the file sharing himself?

  Sorry if I'm not providing a lot of details here, but I'm really frustrated about that. If you need any further information I'll post fortunately.

  Thank you for your time for reading.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Need help with Server installation of files open in my computer

  Hi all

  Give it IM new to open. I would like to install openfiler where I can configure my SAN. I found that there is some software that I have to download openfiler as openfiler - 2.3 - x 86 .iso, openfiler-2.3-x86.esx.tar.gz,group-openfiler-2.3-x86.ccs,openfiler-2.3-x86.vmware.tar.gz.

  My question is what do I have to download all these software for installation and after installation iso file which use it. tar.gz files.  It would be useful if someone advise me or someone send me a useful link to this.

  Openfiler / password is the default password

  try to connect with that and let us know.

  I was able to create the installation disk.  Install and while openfiler rose add a 50 GB disc and had openfiler detect it.

• PC running XP cannot access shared Windows Server 2012 Essentials

  Hello, I'm having a problem with access to files shared on my Windows Server 2012 Essentials on my Dell Inspiron 1100 running XP Pro SP3 I changed all my computers in the workgroup of names to match NetBios servers and all my other computers have access to stocks with the exception of the Inspiron 1100 trying to access in the sharing I am told that I do not have access, I am not offered a prompt to enter a user name and password I am simply denied access. Does anyone know how to get around this problem or fix the issue fact XP and issue with Server 2012 or vice versa. I can access the server to office assistance remotely, but not shared folders which seems strange to me. I've already posted the same question on the TechNet site too since it's a server issue but I find that you can easily post there and receive no help, so that never but I find that almost every subject I posted here, someone has at least made an effort to help with your problem.

  In fact, I created a user account on the server and the XP client gave them both the same user name and password and now I have full access to server shares. I have often continue to try while you wait for answers and find my own solution.

• File level VMWare ESXi VM for Linux on the RDM partition.

  Hi all

  I'm looking and I was wondering if it

  is a VM backup solution that is able to make the backup of my iSCSI SAN

  in the ESXi local data store, which can be automated with the support of

  file-level restore?

  the virtual machine is having a RDM LUN then I may be able to restore a single file where the virtual machine failed or the RDM LUN has been corrupted.

  Any idea or suggestion on how to do it please?

  Thank you.

  AWT

  The RDM LUN must be in virtual mode to use the program to backup to a virtual environment (requiring a snapshot of VMware to work).

  VCB, Veeam Backup, vRanger connection,... can make backup image and image, you may also file level restore.

  Or you can try a solution based on instant storage.

  André

• File server 2003 compatibility with server r2 2012

  I have a file server that is running Storage server 2003 r2, and I just added an application server running server 2012 r2. I am unable to connect to shared printers or folders on the storage server. So, when running against the server 20012 group policies it takes forever for group policy to complete (and sometimes a day) because the GPO installs printer that are shared on the storage server

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Server 2012 - storage server repair file error volume system

  Hey guys,.

  I'm up late panic hoping someone might have an answer.

  We have a file server, 2012 running storage server. One of the volumes reported an error so I have planned some time tonight to perform a repair on it.

  After reading good things about 2012 chkdsk I thought it would be a quick process, however after some further reading, it seems you need to run chkdsk from the command line by specifying the option spotfix for the quickest fix.

  I stupidly he run from Server Manager by clicking with the right button on the volume and selecting the option "repair the file system error.

  It is on a volume of 5.5 to data that is accessed by a large number of users that will start to connect to 6 hours time.

  Managed server showed the repair had obtained 13% after about an hour, but has not changed for some time, so I guess that Server Manager had frozen, so I closed and opened again. I can see the process is still ongoing, but the Server Manager no longer shows a progress bar (just a red bar to show the volume is locked.

  Anyone has an idea how I can get up again the progress bar, or know any way to show the status of the repair running?

  Thank you

  Dave

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows server 2012 file server slow speed

  Dear all,

  I use Windows server 2012 as a server file only with 64 GB RAM and 16-core intel Xeon and size of shared file is only 800 GB. problem is that after a few rate of file transfer from client to server got time slowing down as below.

  copy data between client to server transfer rate are ok (60 MB/s)

  copy data between transfer of client server are low (200 Kb/s)

  whenever I rebooted the file server, it worked super fast, but after a few hours I get this question with transfer rate.

  can someone help me with this regard.

  Noor Uz Zaman

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Remote access Windows Server 2012 through internet with desktop connection

  Summer messing about with it for days and don't get no love.

  Try to connect with Windows 7 Ultimate edition to Windows Server 2012 Data Center version from outside my home network, Starbucks or McDonald's or my server at home.

  Tried all these steps found in this promising and useful article:

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  1. Allow connections to the computer you want to access remotely. DONE - ADDED to THE SERVER AND NON-ADMIN ACCOUNT to RDP GROUP of ROLES, using network level authentication. Connection of Win 7, so this method of authentication should not be a problem, I assume.

  2. Make sure that remote desktop is able to communicate through your firewall. DONE - FOR BOTH PUBLIC AND PRIVATE RULE.

  3. Find the IP address of the computer on your home network you want to connect. MADE - by using the ipconfig/all command

  4. Open your router configuration screen and worms forward port 3389 for TCP IP address of the destination computer. DONE - NOT TCP/UDP but TCP only, internal and external port goes. Note: The use of a booster signal wifi at the end of the House, it is a problem that requires additional configuration? I don't think he has an ip address or acts as a router. But in desperation I can try unplugging then again head the local Starbucks to try to connect.

  5. Find the IP address of the router so that the remote desktop can be found on the Internet. DONE - using "what is my ip", pretty easy.

  6. Open Remote Desktop connection, and connect. ACTUALLY, I think THAT, IN ENTERING [ip router]: 3389.

  But the result of the message is always the typical:

  (1) remote access to the server is not enabled.

  > But this is not true, that I am capable of the DRC at home on the server machine.

  (2) computer remote is not off.

  > But this is not true, as I just left home 30 minutes and sometimes it's rarely, only restarted.

  (3) the remote computer is not available on the network.

  > Don't know what that means. Of course the remote computer is not on the network, I am on right now. It's on my home network. But I can ping my router ip via cmd, then coming to the outside can be done; through my router, I should be able to access inside my home network port forwarding w. But no love.

  So... what to do, what to do...

  The wifi booster is a problem?

  Connects to the Data Center edition a problem?

  What happens if I uncheck the option ' use authentication NLA, is that the passage of the security risk?

  Any ideas about the configuration I could be missing before giving up and go for VPN or TeamViewer. I would really like to see materialized during all the time that I put in trying to run the DRC.

  Thanks for any input.

  / Markus

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Shared drive file Windows Server 2012 r2 access VERY slow

  Every time I open a file that is located in a shared folder on a drive with r2 Windows Server 2012 (videos and PDF with graphics, in particular), says file takes forever to load, videos often stutter, etc.. This affects all computers connected to the field with access to these shared folders/drive. Is there any solution for this? I couldn't find one so far.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home