VDR, VDP, VCB - demystifying the Backup Options

Similar Questions

• find the backup option icloud now on the iphone 6

  Where can I find the icloud backup now option? It is no less "find my phone ' (settings > icloud) as the Apple tutorials indicates however on my iphone 6 it is only an 'Advanced' below the"find my phone"option.» When I type my legacy, it indicates the last backup was about 6 weeks ago. I'm signed in., even responds to security issues, and has been verified. Any ideas how to start back up without the back up option now?

  In settings, click iCloud, and then select backup. Backup is located just below the portfolio and above keychain. ICloud backup lights up and after it starts you will be have the backup now option.

• Re-enable the backup automated in iCloud

  To save the size, I deleted a backup of my camera.  From:

  iCloud: delete a backup device iOS to iCloud

  If you delete your backup for your iOS device, iCloud will stop automatically backup of the device.

  Instead of backup of your iCloud iOS device, you can back up your device via iTunes.

  I can manually save to iCloud, but how to re-enable automatic backups to iCloud?

  You just need to go to settings > iCloud and scroll down to the backup option and make sure it is turned on. When your device is locked, attached to a power source (not a computer) and attached to Wifi, it will back up once within a period of 24 hours each time that these criteria are met.

  See you soon,.

  GB

• How to pause / stop the backup of Windows 7

  I'm 250 GB of mainly files mp3 and jpeg on a 500 G USB backup hard drive. The backup has been ongoing for 48 hours now and is (according to the progress bar) 5% full. The option to display details do not display anything. I want to cancel the backup and reduce the scope of the directories backed up, but the Setup option is grayed out and I can't figure out how to cancel the backup. Can anyone help?

  in the bar of windows startup, "backup" in the search box, open "Backup and Restore" and in the new window, you will have a button that will allow you to cancel the backup, but also where you can adjust the backup options

  Jonathan Matthis aka "7test" on MSN QnA
  Chief Administrator of the Site
  Windows 7 QnA
  http://Windows 7qna.ning.com

• How do I stop the "backup in progress"? It is in the lower taskbar and will not close.

  The message says to use the center of the Action.  I tried changing the settings, but I have nothing has removed or stopped the backup.  Automatically, he comes back after that I connect to my computer and continues until I stopped him.

  Hi KarenDopita,

  in the bar of windows startup, "backup" in the search box, open "Backup and Restore" and in the new window, you will have a button that will allow you to cancel the backup, but also where you can adjust the backup options

  refer to this link.

  http://www.SevenForums.com/tutorials/618-backup-files-schedule-turn-off.html

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/disable-Windows-backup-utility/09ee09de-5ce7-4BF6-B3E9-9ddb0c2785c3

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/disable-backup-in-Windows-7-Home-Premium/b9f7a02f-38c2-4699-BF64-a5fe00550be2

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/disable-backup-in-Windows-7-Home-Premium/b9f7a02f-38c2-4699-BF64-a5fe00550be2

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-backup-wont-stop/66729bb8-978D-40BD-Afae-f545acf5ba78

• How do the backup off-Lan with VCB

  VMware dear Experts,

  We currently have a VCB backup physical server, with the help that we are taking the backup virtual environment, we manage the following scripts

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  CD \program files\vmware\vmware consolidated backup infrastructure

  echo ' # VM1 BACKUP STARTED # "> > C:\Backuplogs\VM1.txt".
  echo "started at % date: ~ 7, 2% date: ~ 4, 2% date: ~ 12, 2%" > > C:\Backuplogs\VM1.txt "
  echo "Start time % time %" > > C:\Backuplogs\VM1.txt

  vcbMounter h 192.16.4.11 u bkp Pei beta@123 - an ipaddr:20.200.20.55 - r o:\mnt\BIN\VM1 t m nbd fullvm > > C:\Backuplogs\VM1.txt

  ECHO "ended at % date: ~ 7, 2% date: ~ 4, 2% date: ~ 12, 2%" > > C:\Backuplogs\VM1.txt
  echo "end time time viral%" > > C:\Backuplogs\VM1.txt
  echo ' # VM1 BACKUP COMPLETED # "> > C:\Backuplogs\VM1.txt".

  Ren o:\mnt\BIN\VM1 VM1_ % date: ~ 7, 2% date: ~ 4, 2% date: ~ 12, 2%
  pause

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  192.16.4.11: is a vCenter server ip address

  20.200.20.55: is a VM IP

  o:\mnt\BIN\VM1 is a Destination SAN LUN

  Once we run that batch file backup that happens on the network, now we want the backup must be done at the level of SAN with the help of the VCB server.

  Here's the scenario

  ESX:172.10.10.10

  On this esx, we have a san lun is mapped by a VM1 is stored on the same, we will map the same LUN to VCB server and now the LUN source and destination that is (o:\drive which is already connected to the vcb server) are mapped to the VCB server. Now with the help of the VCB script, we need to take backup of VM1, please help me how to do the same.

  Concerning

  Mr. VMware.

  In a few words, you will need to only present the VMFS LUNS to the server VCB as you said and change the "-m ndb' option '-san m. This should work if the logic unit number is presented correctly.

• When I try to print a PDF file it does not print and goes directly to a backup of the file option.

  When I try to print a PDF file it does not print and goes directly to a backup of the file option

  original title: pdf print
  Hello

  1. don't you make changes on the computer before the show?
  2. don't get any error message?
  3. what version of the operating system is installed on the computer?
  4 is the issue limited exclusively with printing PDF files?
  5. where are you printing from PDF files?
  6. What is the brand and model of the printer?

  
  Method 1:
  Run the fix it and check.
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
  
  Method 2:
  Perform the steps from the link and check.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  
  Method 3:
  You can perform the steps from the link and check if you are able to print.
  Resolve PDF printing problems. Acrobat, Reader
  http://kb2.Adobe.com/CPS/873/cpsid_87346.html
  
  Reference link:
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

• trying to set up my backup files will be stored on copy c drive: but the only option is the dvd player

  try to set up my backup files will be stored on my drive c: internal, but the only option available is the dvd/cd drive how can I store on my drive c an option?

  Windows cannot save the C: partition (which is where Windows is installed) on the C: partition.

  You must be

  (1) shrink the C: partition and create and partition drive (not the best of solutions)

  (2) install another hard drive (better, but always sensitive to corruption in car during power failres or other problems)

  (3) external USB key. This is the safest option, because the external drive has to know alternative, the only attached USB cable when you need to access the data, create or recover Image backups).

  How to create and save multiple image backups:
  How you can use Windows 7 backup and restore to create and store more than one backup image to a USB drive which has limited free space. This article is based on a user of Windows 7 which asked why backup and restore does not maintain several versions as advertised system image.
  http://www.PAGESTART.com/win7bckuprstr06281001.html

  How to restore the documents from a Windows 7 System Image using Disk Management
  http://www.PAGESTART.com/win7bckprstvhd10131001.html

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows7/restore-files-from-a-backup

  How to use Backup and Restore in Windows 7
  http://www.howtogeek.com/HOWTO/1838/using-backup-and-restore-in-Windows-7/

  J W Stuart: http://www.pagestart.com

• Lightroom does not? I have "the files could not be copied to the backup location" notice appearing as I download from the camera. I ignore and click OK. I then edit my photos and try to export. Water is no longer an option and the exported wor

  5.7 Lightroom does not. I have 'some import options was made' - "files could not be copied to the backup location" notice appearing as I download the device. I ignore and click OK. I then edit my photos and try to export. Water is no longer an option and exported labor is the original and not the published work? What do I need to fix this?

  As Chetna asked, you export original?  Yes, you are. It is asking to export a copy of your original file, that is, of course, not changed. So, Yes, you won't see any of your changes. That's why you can not apply a watermark. Adding a watermark in the image he'd a file not original.

  Choose another value for the Format of Image under settings in the file.

  HAL

• Is it possible to exclude some discs of the VCB image-level backups?

  I have VCB with Backup Exec 12 running successfully.  Image and at the level of the backup files work as expected.  However, I have a server with a large data volume (more than one terabyte) that I would be able to exclude at the Image level backups, using only at the level of the files or any other means to back it up.  It's possible?  A thought I had was to configure the volume in physical rather than virtual compatibility mode.  Thoughts?  Recommendations?

  Thanks in advance.

  A RAW device in mode physikal will not be saved in the VCB. I do it with our databases that reside on the RAW devices in the SAN, and I don't want that they are backed up with VCB. So, it is definitely possible.

  Paul

• VCB on the same servers as backup software

  Is it possible to run VCB on the same server as your backup server? I don't want suppliers to backup VMware plugin/remote agent, but the support of backup real server software?

  I would like to use an existing backup server which backup servers via the traditional agent installed on the server/vm and use VCB just to copy VM images on the local storage of backup server. I won't go on the virtual computer images using the backup of backup software.

  You can... I believe that you use vcbmount to take a snapshot and mount the virtual drive, then its another comand to export data

  VMware has a paper on VCB commands.  I'm not sure of the exact commands... I use the framework vcb on my server (running BE12.5) backup... BE using the vcb to create the snapshot, mount the drive, throw on local storage and then unmount the virtual disk, remove the snapshot, and then save the disk exported to bands...

• Windows 7 backup and restore shows no internal hard disk and the backup location option

  Windows 7 backup and restore is only the possibility to go back to D drive which is a burner DVD C and F is both internal and external hard drives C is the system drive and F is a newly formatted 1 TB drive free. I access F in Explorer windows without any problems and I would use it for backup.

  Hi dairy Tech 2000,

  Welcome to the Microsoft answers site.

  Drive/C: would not be shown to the backup files since this is the system drive. You cannot save files to C:/drive to C:/drive.

  However, when you change the backup settings to another drive on the computer, follow the steps below:
  1. click on start.
  2. backup and restore type of search.
  3. click on change settings.
  4. This will show the drives internal i.e. your F: drive / on the computer.
  Now you can set the location of drive F:.

  Learn more about the backup from the links below: back up and restore: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Back-up-and-restore-frequently-asked-questions
  Backup your files: http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files
  Set or change automatic backup settings: http://Windows.Microsoft.com/en-us/Windows7/set-up-or-change-automatic-backup-settings

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• find the right backup of cloning using up the time option

  Hello
  
  I'm trying to create a script to find out what files to backup (backup rman, rman backup control file and archivelogs) are needed to create a clone of production data base lets say for 1 month ago or two weeks ago.
  
  My backups are marked, performed on the disk, but a night job takes the disk backup files and moves them to tape.
  So, before I can restore correct correct tape files, I need to know what files to backup should I restore a band.
  
  I could start the clone and she'll tell me it cannot find the files of backup that is named xxx, yyy and it will eventually error and output, but I find the files.
  The idea is to find the files before the script (script clone) could not find the right files.
  
  I tried to use the v$ element_sauvegarde, v$ backup_files equivalent rc_ view (s) and tried to join them, but I couldn't find the join columns. I tried stamp column. This gives me some information so I can find the files, but I need to know the approximate duration of the backup.
  
  So my question is: how RMAN queries it sees? (v$ backup %) I couldn't find a link to foreign key between tables.
  Here is the result of what I managed to find, but I have to give the approximation of 1 hour (1 hour before NMR files have been generated and 1 h after) so I could find the controlfile files and the archivelogs rman backup files.
  
  
  'BACKUP' 'BS_TYPE' 'PKEY' 'STAMP' 'RMNFILE' 'STATUS' 'TAG.
  "BACKUP SET" "ARCHIVED LOG" 2568 751143608 ' / bckploc/514_2576.rmn "'AVAILABLE'"ARCH_DAILY_BACKUP_14052011_1900 ".
  "BACKUP SET" "ARCHIVED LOG" 2566 751143608 ' / bckploc/514_2575.rmn "'AVAILABLE'"ARCH_DAILY_BACKUP_14052011_1900 ".
  "BACKUP SET" "ARCHIVED LOG" 2567 751143607 ' / bckploc/514_2574.rmn "'AVAILABLE'"ARCH_DAILY_BACKUP_14052011_1900 ".
  "BACKUP SET" "ARCHIVED LOG" 2569 751143607 ' / bckploc/514_2573.rmn "'AVAILABLE'"ARCH_DAILY_BACKUP_14052011_1900 ".
  "BACKUP SET" "ARCHIVED LOG" 2570 751143633 ' / bckploc/514_2577.rmn "'AVAILABLE'"ARCH_DAILY_BACKUP_14052011_1900 ".
  "BACKUP SET" "DATA file" 2571 751143635 ' / bckploc/514_2581.rmn "'AVAILABLE'"DB_DAILY_BACKUP_14052011_1900 ".
  "BACKUP SET" "DATA file" 2572 751143635 ' / bckploc/514_2580.rmn "'AVAILABLE'"DB_DAILY_BACKUP_14052011_1900 ".
  "BACKUP SET" "DATA file" 2573 751143635 ' / bckploc/514_2579.rmn "'AVAILABLE'"DB_DAILY_BACKUP_14052011_1900 ".
  "BACKUP SET" "DATA file" 2574 751143635 ' / bckploc/514_2578.rmn "'AVAILABLE'"DB_DAILY_BACKUP_14052011_1900 ".
  "BACKUP SET" "ARCHIVED LOG" 2575 751143711 ' / bckploc/514_2582.rmn "'AVAILABLE'"ARCH_DAILY_BACKUP_14052011_1900 ".
  "BACKUP SET" "DATA file" 2576 751143715 ' / bckploc/c-3567074004-20110514-00 '"AVAILABLE" ' TAG20110514T190155' ".
  
  Any suggestions are appreciated.
  Thank you
  Daniel

  Hello

  I tried to use the v$ element_sauvegarde, v$ backup_files equivalent rc_ view (s) and tried to join them, but I couldn't find the join columns. I tried stamp column. This gives me some information so I can find the files, but I need to know the approximate duration of the backup.
  So my question is: how RMAN queries it sees? (v$ backup %) I couldn't find a link to foreign key between tables.

  If your question is only to reach the point of view.
  Then a tip: you should always join columns (STAMP and COUNTY)

  for example

  bs_stamp
  bs_count 
  
  SET_STAMP
  SET_COUNT
  

  SELECT BP.RECID,
    BP.STAMP,
    BP.RECID,
    BS.RECID,
    BP.SET_STAMP,
    BP.SET_COUNT,
    PIECE#,
    COPY#,
    STATUS,
    BP.COMPLETION_TIME,
    HANDLE,
    BS.CONTROLFILE_INCLUDED,
    BS.BACKUP_TYPE,
    TAG,
    DEVICE_TYPE,
    MEDIA,
    BYTES,
    COMPRESSED
  FROM V$BACKUP_PIECE BP,
    V$BACKUP_SET BS
  WHERE HANDLE IS NOT NULL
  AND BS.SET_STAMP   = BP.SET_STAMP
  AND BS.SET_COUNT   = BP.SET_COUNT;
  
  SET_STAMP  SET_COUNT  COMPLETION_TIME           HANDLE                                                                            CONTROLFILE_INCLUDED TAG
  ---------  ------     ------------------------- --------------------------------------------------------------------------------- --------------------  -------------------
  751030325  109        13/05/11                  +FRA/db10g/backupset/2011_05_13/annnf0_backup_full_0.379.751030327                NO                   BACKUP_FULL         
  
  SELECT FILE_TYPE, FILE_TYPE, STATUS, F_NAME
  FROM V$BACKUP_FILES
  WHERE BS_STAMP = 751030325  AND BS_COUNT= 109;
  
  FILE_TYPE                        STATUS           FNAME
  -------------------------------- ---------------- ------------------------------------------------------------------
  ARCHIVED LOG
  ARCHIVED LOG
  ARCHIVED LOG
  ARCHIVED LOG
  PIECE                            AVAILABLE        +FRA/db10g/backupset/2011_05_13/annnf0_backup_full_0.379.751030327   
  

  In this example, I have 4 archivelogs in the backuppiece.

  I hope this can help you

  See you soon,.
  Levi Pereira

• Time Capsule - problem with the backup

  Hej!

  I get the message "an error occurred during the file copying. The problem may be temporary. If the problem persists, use disk utility to repair the backup drive. "A bit of research on Google, it seems that to restart the time capsule actually perform a repair disk. So I did it. The problem comes back, and sometimes she disappears, if I restart the backup, which confuses me. Is it possible to view the error logs and check what is the problem? I'm afraid that the backup drive may have hardware problems. I bought time capsule airport little for more than a year (in Sweden).

  Someone else has encountered this, and what was your solution?

  Johannes

  Most of the questions is network... and the error messages may not clearly identify between a network and disk problem problem.

  I bought time capsule airport little for more than a year (in Sweden).

  How long this problem has been going since then?

  In Europe the warranty period may be 2 or 3 years by law.

  Certainly if you have AppleCare on a supported product... computer, ipad, or apple TV the TC will be replaced by Apple under warranty. Just explain your problem to them.

  If you do not have access to the warranty or replacement.

  I highly recommend that you check your drive TC if there is nothing on what you need... then do a single pass low level format. It's utilitarian airport disk tab Archive is here... then the clear operation.

  

  Erase use the single-pass option.

  

  It is a low level disk format. (Don't bother with 7 and never even dream of using 35).

  If the problem persists when you restart the backup I suspect network problems... or the TC is a failure... mine (a 3rd in 3 years) comes from the same way... I pulled the drive and replaced it with a better brand than the basic model known problem seagate used Apple.

• How can I download the backup on Mac and then restore it via iTunes?

  The STRP to restore stuck on "remaining time: estimation...» "So I would like to download the backup on my Mac and then restore it via iTunes.

  This can be caused by a corrupt existing backup that should be deleted, or data on the device that causes the backup fails.  To resolve these issues, try to clear your last backup (if you a) by disabling the iCloud backup in settings > iCloud > storage and backup, and then press on managing storage, type on your device under the backups, and then click Delete backup.  Then go back and turn iCloud backup and try to save again.

  If it don't always make a backup, you may have an app or something in your camera roll which causes the backup fails.  To find one, go to settings > iCloud > storage and backup > manage storage, tap the name of your device under backups under tap Backup Options show all Apps, turn them all off (including film) and then try to save again.  If the backup was successful, then the camera or one of your applications is originally the backup fails and you must located by the process of elimination. Turn on the film and retry backup.  If it succeeds, some of your applications to turn on and try saving again.  If it succeeds once again, turn it back on a few apps more then try; Repeat this process until it fails.  Finally, you will be able to locate the app problem and exclude from your backup.