Venue 8 Audio Pro problems

Similar Questions

• Dell Tablet wireless keyboard does not not with the venue of Dell Pro 8

  All,

  I bought my wife a venue of Dell Pro 8 for Christmas and the Tablet Dell Wireless Keyboard.   The keyboard has been delayed until after Christmas and just arrived, but we will have problems to run.  We paired up it and controls volume and brightness keys work fine but if none of the keys work.  The Tablet click on w I also nothen you hit but no letters don't appear in the word or the IE address bar.

  We have a defective keyboard?

  Scott

  Hi Lou,

  Thank you for taking the time to answer, but as I said, we had no problem of this pairing and some of the keys worked (volume and brightness controls).

  I found the solution to the problem which has been updated from the BIOS.  It seems that the aircraft delivered in December with the original BIOS A01.  We ran a Dell utility provided with the tablet that he upgrade A03, whereupon the wireless keyboard worked fine.

  Thanks for trying to help!

  Scott

• HP Pavilion HauppaugeWinTV HVR 1290 and Windows 7 - Audio stuttering problem

  Hi all

  I have the WinTV HVR 1290 card installed in a new building.  Window7 Media Center does a great job, support the DVR functions.

  I searched for the latest drivers that HP has on Windows7/64 Bit support.  The current problem is that the recovery of a sleep almost always ends with an Audio stuttering problem.  A reboot clears the stuttering.

  HP probably has some drivers of Windows7 pre-release for sold third party hardware integrated into the Media Center PC.

  Any help would be appreciated.

  Thank you

  Roy

  Open Device Manager and look under sound, video and game controllers to see what sound card you have.

  If you have X-Fi Xtreme Audio choose your template from here.

  Scroll down.

  http://support.creative.com/kb/showarticle.aspx?SID=61105

  If you have Realtek use this driver.

  check accept and next. install the updated Vista driver.

  http://www.Realtek.com.tw/downloads/downloadsCheck.aspx?langid=1 & PNid = 14 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

• Sony XBR-55X850D audio sync problem with Xbox One S

  Recently bought a new Sony X850D 55 '' TV, it's my 3rd Sony TV the past 10 years, and the first I had a problem with.

  I use the TV mostly for games on my Xbox One S, but have found that there is some dramatic audio synchronization problems. The sound coming out behind what is displayed on the screen (IE. Close door, sound audible is later). Xbox is connected to the TV via HDMI to input 1. I also have a bar of his (CT380) connected via HDMI output HDMI-4 ARC.

  I tried with and without the Soundbar without result. 3 different cords HDMI do nothing. Using my old Xbox One compared to the new One S has no difference. Question was not present on my old Sony TV. Tried with ClearAudio on and out, no change. I can't find all the parameters of sound synchronization in both of the TV, bar, or Xbox.

  Running Version 5.1.1

  Thank you

  Jerome,

  I could solve my problem using HDMI from the Xbox to the sound bar HDMI then another sound to the TV bar.

  Thanks for the good help!

• Satellite L300 17L - audio driver problems

  Audio driver problems, I use Windows XP SP2, I installed the MS patches, but still there is no sound.

  And in the control panel in the sound section says that there is no audio driver installed.

  I need help please!

  Hello!

  It s a known issue and when you search a bit in the forum you will find a large number of publications on this subject.

  Remove the sound card from the Device Manager and the high definition Audio Controller from Device Manager.
  And then update Windows with KB835221 & KB888111 patch, reboot several times, and then you can install the driver from Realtek but download and install Realtek driver directly.

  Good bye

• (Redirected) Waves maxx audio pro does not work

  Hello

  recently my windows has been corrupted, so installed a new but the waves maxx audio pro does not work in my inspiron 7548. When I open audio dell there is no options there is empty

  need help...

  Better for this post in the Forum Audio Desktop, here:

  http://en.community.Dell.com/support-forums/desktop/f/3513

  Bev.

• Audio sync problems

  I am a wedding videographer who has a few months ago, from FCP to the PrPro CS5. I am currently working on a wedding ceremony where I have some audio synchronization problems. I filmed the wedding with 3 cameras high definition. The video was filmed all HDV 29.97, with 32-bit audio 48000khz. In addition, I used microphones tie for the spouse and the officer, each record to a device in the WMA format. I used "free mp3 wma converter" (which may be part of the problem!) to convert the WMA in 480000khz 32-bit WAV files. After using HDV Split to ensure that there are no breaks, I have imported/captured everything in first CS5. Once I dropped everything in the timeline panel, I find the part in every audio layer where the officate said thank you, "you can be sitting." I created markers not numbered to the exact frame that starts and all the video layers 3 and 5 audio layers becomes synchronized. However, when I scroll further down the timeline, something badly screwed up and I don't know if it's the video w / audio layers, or if this is WMA files that I have converted to WAV. Any help would be great!

  There are several discussions on the use of a separate Audio recorder and the OOS issues. Much discussion was provided by a few of us "old-timers," who bemoaned how things were to be, when the movie camera was attached to the Nagra, and could be configured to provide synchronization of Crystal, but that does not seem possible today with our great digital equipment. Should be easy, but it is a difference in "clocks".

  Hope just to get this straight, as I blew it away last wire - one single user with Zoom Audio recorder has found that the Audio derived from 100.3%, used if just the Stretch tool w / maintain Pitch to address that. It took experimentation, but when he found the % correct, it fixed everything.

  For questions of a general nature OOS, this ARTICLE could offer some advice, but in the end, I think finding the % of drift, will fix everything for you and with this same equipment, will still work. Test now will be dividend in the future.

  For some additional information, I search on this forum for 'sync' and maybe filter the_wine_snob (me), or Jim Simon and read. Jim is the user who found the exact % that was disabled, as well as sound equipment made of marriages.

  Good luck

  Hunt

  PS - just ignore the elders moaning in our drool cups.

• Venue 8 5830 Pro upgraded to win 10 Bluetooth keyboard problem

  I could put my 5830-10 Windows using Microsoft 'MediaCreationTool '. I, unfortunately, had no room for the update and had to go to the wipe everything and then install Win 10 option. It worked.

  Unfortunately, many of the drivers had to be updated and I have been busy doing that, but I have a big problem. When I bought the first of all the coming 8 Pro, I also bought a case with a Bluetooth keyboard. The keyboard worked fine with 8.1. To help to win 10, I've matched both the keyboard and a Bluetooth mouse. The mouse works fine, but even if the keyboard is paired, its strikes are not registered and that I have to use the on-screen keyboard.

  I found a post on another site that offers to go into the settings of "accessibility" and disable FilterKeys. Unfortunately, this setting is for the keyboard on the screen and not the Bluetooth keyboard, if it does not work. There seems to be no help in the Bluetooth settings. It shows that the keyboard is paired, but not much else.

  I guess I could try another keyboard, but it worked beautifully with 8.1.

  Any ideas?

  cooverr

  Yes, absolutely... and does not work.

  What I understand, Microsoft has changed their Bluetooth Driver in Windows 10 for safety reasons and it's much older BT keyboards with sloppy software does not work in win 10.

  In case it helps someone, I finally found the solution to my old Bluetooth keyboard work with Windows 10 on the venue Pro 8.

  In the device under Bluetooth-Bluetooth car radio-> properties > Manager there is a tab named 'Power Management'.

  The option "allow the computer to turn off this device to save power" is checked by default. I unchecked it and my old Bluetooth keyboard that worked with Windows 8.1 works on Windows 10 once again.

• Satellite A100-920 - Audio driver problem - Win XP Pro

  Hi all

  I'm having a problem with audio driver. I can't seem to find one that works anywhere, I looked at several forums and the Toshiba site for drivers without success. I basically hit a wall, so I hope someone can provide a working solution. :)

  Audio device:
  Feature: 82801G (ICH7 Family) High Definition Audio Controller
  Manufacturer: Intel

  (Information retrieved using a Ubuntu 9.04 Live CD)

  Although a windows system it labels as "Realtek High Definition Audio Controller"? (I'm not an expert with the drivers, so maybe this is a stupid question...) :)

  The computer is a Toshiba Satellite A100-920 (PSAA9E) Windows XP Professional.

  I spent hours trying to solve this problem, so I hope this is the last mile. :) Thanks to anyone with suggestions.

  Best regards
  Alan

  You use Windows XP Home with SP2 or SP3?

• Satellite Pro M30 - audio output problem

  Hello

  Audio output level is lower when I bought this laptop... All of a sudden without any reason. I almost don't hear all the sounds... What is the problem? Software is ok. I reinstall the audio drivers. Once when it was portable sound back to a normal level and after restart, it was still very quiet...

  I thank the of for any advice

  Hello

  He s strange question you described, but first, you must verify the volume control settings in the sounds and Audio devices.
  Check if controls are set to max.
  Also check the application audio sigmaTel. There you can disable power management.

• Tecra 9100: Yamaha audio driver problem

  H

  I've just formatted my hard drive and installed Windows XP Pro.

  I ve installed all the latest drivers but I m in trouble with one. audio driver for the yamaha ac device.
  I get the yellow mark next to him.
  So I tried to uninstall, but when I reinstall I cannot start code 10.
  It s the latest driver so I put t know what s causing the problem.

  Can anyone shed any light on the subject, thanks rob

  Hello

  The outcome is known for me.
  The audio driver is simply not compatible with Win XP SP2

  Yamaha AC - XG driver used the PortCls function to check the version of the operating system. XP Service Pack 1, PortCls function is changed, while the Yamaha rider cannot get operatingsystem version correctly. This problem also happens to Windows XP SP2.

  Yamaha already provides the fixed driver. The fixed driver version is the following;
  yacxg.sys 6.13.10.2152 with software synthesizer
  yacxgc.sys 6.13.10.3152 free software synthesizer

  Welcome them

• Audio beats problem on model 3007-tx dm4

  My laptop model is HP Pavilion dm4 3007-tx running on windows 8.1 Pro and windows 7 (Dual boot)
  My problem is that the Beats audio isn't always activate when you are running windows 8.1 pro (although I turn it on)

  but works perfectly on my windows 7
  The audio driver is version 6.10.6418.0 on 24/7/2555 (not later)
  
  If I open a program that plays BEFORE its plug into the headphone jack, the sound will not be processed by Beats audio (I have to reopen the program to redo the work of Beats)
  But if I plug headphones first, then open the same program, Beats will work
  
  I'm trying to update to the latest version of the driver, but what I get, is that the Panel is all gray (I can't turn same beats on or off)
  So, I drop the latest driver and he revert to the same version
  
  Now if I want to listen to music, that I have to plug before opening an iTunes
  
  It's also boring!

  Hello:

  Have you tried the driver IDT Beats Audio W8.1 of the 15 t-j100?

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124012-1 & CC = US & DLC = in & LC = on & os = 4158 & Product = 6521374 & sw_lang =

• Audio visual problems with Windows XP

  I hope someone can help me - I have a problem that's driving me crazy! I have a Satellite Pro A120, running Windows XP.

  It began during the last week, ever since I got an update. Computer starts fine, but when I open some software (Word or Outlook), the screen seems to jump and my familiar taskbar going green/blue grey - not the same as the taskbar Windows classic because the Start button is displayed in a big.

  Added to that I lose sound so I can not play videos - I opened to the top of sounds and Audio devices, and nothing is selected with the shaded volume bar and the pointer to the left. Also, I have my Office 2003 programs put in place to open in a nice shade of blue... but now they open in gray. More depressing!

  I have a round work is to "let it happen", back on the desktop, select the Windows Classic theme, then the XP theme, then go to the run menu, type services.msc and 'start' Windows Audio and then everything seems OK... until I start it again!

  Have tried setting a Restore Point earlier - this has not solved the problem.

  Have you tried the patch XP KB 935448 from the Microsoft support site - this has not solved the problem.

  Phoned A Tosh and speaks at a high-level technician (sweet girl) who really can't help me... have forced me to re - install the latest version of the sound driver she thought it might be a hardware problem - can not see it is a hardware problem myself.

  Grateful for any help. Thank you very much.

  Hello Lindsay

  First of all, I must say that it is really not easy to deal with such problems, especially for the technical support agents. They must define if there is some hardware or software problem designed Toshiba. It's really not easy to be able to relate to this suddenly or after update problems.

  If system restore didn't help something serious. Maybe you should really backup your data and do some clean OS install.

• Audio Glitch problem when the playback/record on Satellite A100

  Hello world

  I have an audio glitch issue with my Toshiba laptop.

  When you play any audio file off the coast of the HD I mean glitches.

  I play audio with the media player through the integrated sound card and...
  A Firewire Interface Audio FF400 RME. (which works fine on other computers).
  A USB Alesis Photon x 25 USB 1.1 Audio Interface. (which works fine on other computers).

  but all still produce this annoying glitch.

  Other forums (see below) seem to think it's the fan.

  But what anything what is the solution to solve this?

  Someone on one of the other forums (see below)

  Said that they could not fix it and sold their laptop, I hope I don't have to do that too.

  A reply as soon as possible to support Toshiba or anyone with ideas please give your contribution.

  concerning

  A.

  Satellite A100-998
  Main features
  -Numtxpackets® Centrinoa® Duo Mobile technology Numtxpackets® Corea? ¢ 2 duo Processor T5500
  -Windows® genuine XP Media Center Edition
  -Hard drive 200 GB
  -2 048 (1, 024 + 1, 024) MB of RAM DDR2 (533 MHz)
  -15.4 "screen Toshiba Trubritea® WXGA TFT display
  -Drive DVD Super Multi (Double Layer)

  Hello

  I had the same problem with my Satellite Pro A100 - basically whenever the fan kicks inside or outside, there was a glitch in the audio that pretty much unusable laptop for music.

  At the end of the day, I followed the advice of Nelucard and changed to MPS Multiprocessor PC ACPI processor/computer on Device Manager driver. I then had to reinstall most of my drivers, but once this is done, the fan has been all the time, so there are no glitches more - at least not once the laptop has heated up to... at the beginning, the fan still comes in and out, but after 3-4 minutes, that's all the time. I can live with that.

  It's far from ideal, but in my case it worked and I can now use Reaper, audio streaming and use a load of plug-ins with no problems. I hope Toshiba will come back with a better solution via a BIOS update in the future, but I think that this problem has been known for 7-8 months and nothing has been done so far...

  In any case, good luck and I hope this is of some use.

  See you soon.

• Material RANE/Serato SL2 SL3 SL4 Core Audio Port problem with El Capitan

  Hi Apple,

  I and many others have had problems when using devices with Rane Serato DJ software where the breaks down of software, nor will we get audio drop-outs and crashes.
  (Audio Interface) device that I use is RANE SL3.

  MacBook Pro (retina, 13 inches, end of 2013)

  Version: 10.11.2 (15 c 50)

  Intel Core i7 2.8 GHz

  16 GB 1600 MHz DDR3

  Iris 1536 MB Intel

  1 TB SSD

  Serato have updated their software (1.8.1) to take in charge the last OX El Capitan (10.11.2) and announced that the problem is with the drivers of RANE and Serato not.

  See Site for more information: https://support.serato.com/hc/en-us/articles/213821528

  RANE said its now a problem with Apple and is a Port Audio problem. Please see their announcement about the update of BEEF: http://dj.rane.com/support/knowledge-base/el-capitan-update

  This is the Forum for discussion with RANE, saying they are awaiting your response on fixing this problem.

  here: http://dj.rane.com/support/knowledge-base/el-capitan-update

  Rane suggested only that downgrade us our BONES to the Mavericks or Yosemite. This should not be the case!

  We need answers, and for not having spent somebody else as everyone pushes the blame.

  Please you can find what the solution is rather then downgraded to a previous operating system. It's a very frustrating with all the people who spent loads of money on a Macbook and RANE hardware especially this time of the year where we DJs play every weekend like our jobs.

  Hope this gets sorted soon
  Concerning
  Anthony

  This is a user forum. While we, users can sympathize, is not in our power to resolve this issue if it's a bug.

  To allow Apple to know of this problem, you must use the appropriate feedback chanel.

  http://www.Apple.com/feedback/