Venue Pro 8 - Jack audio input

Similar Questions

• Why can I not get no response from the audio input jack? have you tried 4 different microphones in Final Cut Pro

  I have started working on FInal Cut Pro and have discovered that my audio Jack does not recognize any microphone that I plug.  I tried 4 different microphones up to now.   The input Attenuator is turned up 50% and beyond with no effect.   The entry just says "Audio" preferences pane: "Line input" with no other available device.  Am I missing something here?   He is 4 years old and this is the first time I tried audio input.

  The line-in input on a Mac requires an entry amplified, not a single entry.

  The headphone includes a contact mic. See:

  How to use the Apple earphones with remote and mic with your Mac - Apple Support

  You can also het USB mic input devices

• Audio input on mac (MacBook Pro (retina, 13 inch, mid-2014) which has a single audio port for headphones and number of PORT of ENTRY.

  How to do on my MacBook Pro (retina, 13 inch, mid-2014), which has only a headphone audio input port? Do Garageband, or Preferences/audio, or Audioand MIDI or what?

  Connect an audio interface to a USB port to have an audio input, or insert a divider entry in the headphone port. You need additional hardware to have an audio input.

• 550-215na Pavilion: no sound from the rear audio input jack

  Hello

  I recently bought a new PC and I immediately ran into an audio problem that I can't understand. I get no sound at all from the rear audio input jack. I'm getting sound before making, and the plug rear mic works. When I plug something into the rear socket, a message appears grateful that there is something. When I checked the sound settings while it is plugged into the rear outlet, the equalizer is moving, which indicates that he gets his. But nothing comes out when I plug headphones or speakers in. I can exclude a fault with the speakers and the headphones, because they work very well to come forward. All the drivers are up to date.

  Any help would be greatly appreciated!

  Hi there @PrimoFigs,

  I hope you find your experience of positive Support Forum! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you get no sound from your speakers when connected to the rear audio ports. I'm happy to give you a helping hand with this.

  Have you tried to connect another device to this port, whether it of a different set of speakers or earphones, headphones just to test if one of them works?

  What it is connected to the front port at the same time? If so, then disconnect this device and try again the rear port and let me know if there is a change.

  Also try this: desktop HP-no sound on speakers (Windows 8).

  Please let me know if any of the work of tip for you suggestions and if we don't solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• EliteBook 840 G2: Component line software plug-in to an input jack audio combo?

  my laptop has an input jack audio combo and I want to use my laptop's built-in speakers to listen to any devices playing external music (like the smartphone, player or turntables, cassette etc.)

  the built-in speakers are functioning normally when anything connected to this plug. (the built-in microphone works normally and the built-in speakers are functioning normally.)

  There is no problem as well when I connect headphones combo of my mobile phone + microphone with connector PLUG device (line 3/4 pin 3.5 mm male) to this Jack, and I can use in videoconferencing and. This means that when I connect it to taking combo on my laptop, the audio output only made this listener combo + micro, no built-in speakers, and audio input only comes from this listener combo + mic peripheral, not from the built-in microphone.

  But, when I connect an external audio source to this Jack with a TRS connector (line 2/3 pin 3.5 mm male), it is still detected by the Control Panel audio DTS PHYSICALLY (there is a message in the lower right of the task bar button) but not detected by the recording of the Panel tab

  Hello

  You cannot use it in the form online and in many cases, it does support a microphone stand alone, you can use headsets whose microphone + headphones.

  Kind regards.

• Genesis 4 Apple Tv doesn't have an optical Audio input jack.

  I just replaced my generation 3 Apple Tv with a generation 4 Apple Tv.

  The Genesis 3 has an optical Audio input jack that I used to connect my Bose system.

  The Genesis 4 doesn't have it.  Now I can't audio through my Bose system.

  Any suggestions?

  Use something different? I have read there are some cards, but you are right, that the v4 of the Apple TV doesn't have an optical port.

• get sequential messages on audio input jack

  First a box with the speaker appears with the message "You just plug a device into the audio."

  then he stands up again with
  "You just unplugged a device to the audio input jack.
  He repeats these messages even with disconnected speakers.

  Hello

  1. what operating system is installed on the computer?

  2. What is the brand and model of the computer?

  3. you remember to make changes to the computer before this problem?

  4. you get this Realtek HD Audio Manager error message?

  Follow these steps:

  Method 1: Run the troubleshooter if you are using Windows 7
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: If you get this Realtek HD Audio Manager error message, you can try to disable the notification.

  (a) open Control Panel, select hardware and audio.

  (b) scroll down and select Realtek HD Audio Manager.

  (c) click the little 'I' in the lower right corner.

  (d) turn off the box "Show icon in the notification area.

  (e) double click on 'OK'.

  If this is due to a defective material, I recommend you contact the manufacturer of the computer.

• Now I get a message "you have just disconnected a device to the audio input jack," which causes the music stop and start

  Now I get a message "you have just disconnected a device to the audio input jack" quickly followed a message that 'you have just plugged a device in the audio." He then takes the messages. This translates to stop the music. I checked all the connections.

  Hello

  1. this happens when you plug in the headphones?

  2. this happens to you while streaming music online?

  3. when exactly you get this message?

  Please follow the steps mentioned below.

  Method 1:

  Follow the steps mentioned below.

  a. click the Start button.

  b. in the Start Search , type Device Manager and press ENTER.

  (c) in the Device Manager dialog box, click the Action menu, and then click find the hardware changes.

  Method 2:

  Please run the troubleshooter mentioned in the article below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  See also the below mentioned link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

• Challenges of the audio input jack (seems not work)

  Hello

  I use an HP Envy 15-j030eb, running Windows 8.1 x 64.

  Recently, I need to use my laptop audio input jack to connect my speakers, but I don't get all the sounds. I tried to connect two different types of headphones, with no audio to come through. I don't remember really when I finally used, but I'm sure it worked at some point.

  Otherwise it is inserted into the Jack, I get his normal good through the internal speakers, connect a TV via HDMI also works very well.

  I tried most of the solutions I could find online (definition of default playback device, change the bass and treble levels, do a hard reset, reinstall the drivers...), but nothing helped. Start Notepad from a live USB Ubuntu USB also translates the same behavior; play music while my works of great internal speakers connection helmet muffles all. This leads me to believe that it is not a Windows/driver issue, but a bios/firmware/hardware one.

  Run HP (from usb boot) and the test of speaker adio also doesn't send audio signal to my helmet and gives a failure code: gll3kv-6nm782-mfgjxg-20ek03. I could not decypher this identifier.

  Any suggestions on how to proceed and get my audio jack working again please?

  Kind regards

  Klmdb

  Hi @klmdb

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I saw your post about the problems with your audio jack. I looked in that identification code of the failure that you have posted and there is an audio hardware failure which could be a couple of different things, but from what you describe, it's the audio jack that has failed.  The audio jack is not a replaceable part, you will need to seek to replace the motherboard or card mother.

• Is it possible to use the audio jack as input?

  I was wondering if any of you know if it is possible to use the audio input jack on the BB10 devices as input source?

  Yes, it is, in fact, that BlackBerry has blogged about it!

  http://devBlog.BlackBerry.com/2013/07/beep-Beeep-beeeeeeep-and-spandex/

  and there code ready for you (from the blog article) on Github!

  https://github.com/BlackBerry/Cascades-community-samples/tree/master/AudioAccessory

• Smartphones connect blackBerry storm to car Audio input jack

  My (new) Volvo has an audio input jack, I connected my storm with a standard stereo cable.  I played several songs on my way into work.  At noon, I plugged the storm back to find the storm no longer plays on the audio jack.  It's like the storm audio Jack does not recongize the connection, the songs through the speakers of the storm.  I ran a few tests.  The stereo headset supplied with Storm still works.  The cable and the plug of the car still work with other MP3 device.

  Why all of a sudden it does not?

  Does anyone else have this problem?

  And, Yes, I jumped the battery and restarted.

  Another point to add to my list, this phone is driving me crazy!

  It was my cable!

  Even if the cable has worked in another device, there be a small difference between the work cable and the non-working.

  How to remove this thread or mark the thread solved?

• Satellite C870 - I damaged the audio input jack - where to get a new?

  It seemed to me have damaged the audio jack on my laptop, does anyone know where I can get a replacement for it and advise me if it is easier to replace, or to find someone to replace it for me

  I don't very well if you want to be able to get these parts separately m.
  To my knowledge, the headphone and microphone are part of the motherboard and are soldered to the motherboard.

  However, all compatible parts can be ordered from the maintainer authorized Toshiba in your country.

  PS: maybe an alternative would be an option for you: a kind of card like USB 2.0 to 3.5 mm Jack Audio / microphone

• Using the headphone jack to the Audio input

  Try to use my 4 GB Fuze to connect to the external audio device.  Using the standard FUZE audio output (headphone) to connect to the audio inputs, Radio BOSE or compatible stereo or home.  When connected to the input on my Bose Compatible radio, apparently not having enough power to perform this task.  "Click, click, etc."  Darn Ipod seems to be fine in this config.  Any thoughts there?  I'm sure that this is relevant for many.  Might does not seem to find a good thread about it.

  Thank you.

  Yes, the sensitivity varies depending on the computer, set of accessories speakers speakers, FM modulator, car audio, and so on.  The variable volume of the headphone level can come handy.

  The 30-pin is also variable output can be very useful, as configured in the "rocket".  The Griffin dock works fine, as long as you have 5v power supplied to the USB cable.  This output is too strong.

  Bob

• Can you stereo audio input in an iPhone and listen in real-time?

  Well, it's rather a strange question, so I will explain briefly the background... I am a user of the hearing and I'm considering the purchase of hearing aids new fantasies that are capable of connecting to an iPhone (wireless via THE Bluetooth); This allows several things, including the ability to listen to the audio from the phone.

  I currently don't own an iPhone but wonder if buying one, as well as these hearing aids (Starkey Halo 2, if you're curious) might be a good option.

  The thing that is currently my attention is: is there a way that I could use this configuration of audio stream of (for example), a TV or a stereo directly to hearing aids? To do this I would need power audio * in * the iPhone and do share the same audio output for hearing aids. The audio input should be high enough quality and (especially!) in stereo, not mono; so we couldn't use the 3.5 mm jack. Ideally, I'd like to audio input via a digital SPDIF (PCM stereo) connection; If this is not possible then via a signal analog stereo level line (preferably via XLR, but failing that would make a jack or RCA). Another important thing is that (except what is inevitable due to the nature of the Bluetooth connection), this should be pretty low latency.

  I guess I would need some kind of accessory for this and perhaps also additional software.

  How possible it seems?

  You might want to repost on in the forum "hearing". There seems to be a number of users of Halo.

  Hearing

• Satellite M40 - 142, stereo audio input

  I can 'stereo' record through the microphone in Satellite M40 - 142?
  It is possible to have a line-input/output stereo or mono only?

  Hello

  As far as I know the line output (headphone jack) allows the connection of stereo headphones (16 Ohm min.) or a different audio output device. When you connect headphones, the internal speaker is automatically disabled. The input line (Jack Microphone) allows to connect a monaural microphone or other audio input device.

  Good bye