Using the headphone jack to the Audio input

Try to use my 4 GB Fuze to connect to the external audio device.  Using the standard FUZE audio output (headphone) to connect to the audio inputs, Radio BOSE or compatible stereo or home.  When connected to the input on my Bose Compatible radio, apparently not having enough power to perform this task.  "Click, click, etc."  Darn Ipod seems to be fine in this config.  Any thoughts there?  I'm sure that this is relevant for many.  Might does not seem to find a good thread about it.

Thank you.

Yes, the sensitivity varies depending on the computer, set of accessories speakers speakers, FM modulator, car audio, and so on.  The variable volume of the headphone level can come handy.

The 30-pin is also variable output can be very useful, as configured in the "rocket".  The Griffin dock works fine, as long as you have 5v power supplied to the USB cable.  This output is too strong.

Bob

Tags: SanDisk Sansa

Similar Questions

  • Is it possible to use the audio jack as input?

    I was wondering if any of you know if it is possible to use the audio input jack on the BB10 devices as input source?

    Yes, it is, in fact, that BlackBerry has blogged about it!

    http://devBlog.BlackBerry.com/2013/07/beep-Beeep-beeeeeeep-and-spandex/

    and there code ready for you (from the blog article) on Github!

    https://github.com/BlackBerry/Cascades-community-samples/tree/master/AudioAccessory

  • Now I get a message "you have just disconnected a device to the audio input jack," which causes the music stop and start

    Now I get a message "you have just disconnected a device to the audio input jack" quickly followed a message that 'you have just plugged a device in the audio." He then takes the messages. This translates to stop the music. I checked all the connections.

    Hello

    1. this happens when you plug in the headphones?

    2. this happens to you while streaming music online?

    3. when exactly you get this message?

    Please follow the steps mentioned below.

    Method 1:

    Follow the steps mentioned below.

    a. click the Start button.

    b. in the Start Search , type Device Manager and press ENTER.

    (c) in the Device Manager dialog box, click the Action menu, and then click find the hardware changes.

    Method 2:

    Please run the troubleshooter mentioned in the article below.

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

    See also the below mentioned link.

    http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  • Activate the audio input

    I recently had a problem with my M - Audio Delta 66 sound card. After the firmware update, I get the sound using playbacks such as winamp, but no recording or reading in to THE 3.0.1.

    The message I get is: 'the audio input is not activated. Audio recording is not possible. Please check your configuration of the entry. »

    Where can I find the configuration of Windows 10 entering?

    Thanks, but the process you suggest is exactly where I was getting the message. I went to the view of M-Audio and discovered that there are no firmware updates or software for Windows 10. In a fit of desperation, I downloaded and installed the firmware for Windows 7 (64 bit) Sr1. things work very well now.

  • Streaming mp3 using the Audio tag does not work in the app, while working in the browser

    Hello

    I fight with this problem on the second day and still can not get it to work.

    I'm on Soundcloud mp3 streaming and all works in Wellington and the browser on the device, he refuses to work in the application.

    -Do you have someone at - it had the similar problem?

    -Have you had a chance to make the streaming solution work in app?

    -It could be cause by the fact that Soundcloud uses a 302 redirect to a temporary URL?

    Thanks in advance

    I think that the redirect can be a problem. It works if you choose a url that links directly to a stream for example

    http://AUDIO1.ideastream.org/wcpn64

    Have you tried? I used the audio tag to read feeds with success on OS6 and OS7. On OS6 was a problem of the CBC, but the original CBC played yet.

  • You can use a headphone jack as a Mic In on iPhone

    Hello!

    You can use a headphone jack as a Mic In on iPhone? I need an external MIC for video production...

    Thank you!

    N ° however, headphones with microphone and the proper plug on the headphones provided with it, then you can use this microphone. You might associate your own plug, taking care to use tape appropriate to connect the microphone during the deactivation of one for the headphones. Don't forget the microphone you are using matches the impedance of the microphone of the device.

  • my headphones (or headsets) does more work when plugged into the audio input jack

    I have a 2010 27-in. iMAC.   I am running Yosemite 10.10.5.   Recently I can't get audio on the audio jack that I always used with my helmet.  Have tried the other sons of contact as well as the apple earbuds.  Audio is great internal speakers.

    When you plug your earphones sound still come through the internal speakers?

    When you plug in your headphones, you see those as an option in preferences-> sound-> release system?

  • Inspiron 15 do not detect the headphones into the audio input jack

    Yes, I checked to make sure it wasn't the atria. I used 2 different pairs, each of the works fine on my other computer.

    My laptop has been recently upgraded to Windows 8.1. Since then, the audio Jack was my ear has been detected. This has not happened before.

    Also, I know there are a lot of laptops with 'Inspiron 15', but I don't know exactly which one it is. If you could tell me how to find it, I'll do.

    If you want to try the native audio driver, the instructions are through this link above. If you want to see if it is better to have a driver directly from Realtek:

    Go to the selection of downloads Realtek page. http://www.Realtek.com.tw/downloads/
    On the page, click on 'High Definition Audio Codecs.
    Check "I accept", and then click "next".
    In the column named "Description" you can find the file named README. Who has the instructions for the installation or update.
    In the column named "Download", click one of the server names to download the Readme.
    Return to the column named "Description" and select your operating system (and if it is 32 bit or 64 bit) at the top of page 2 choice in the list.
    In the column named "Download", click one of the server names to download the driver.

    The current version on the Realtek site is R2.75. Don't know how that one differs from Dell.

  • Why can I not get no response from the audio input jack? have you tried 4 different microphones in Final Cut Pro

    I have started working on FInal Cut Pro and have discovered that my audio Jack does not recognize any microphone that I plug.  I tried 4 different microphones up to now.   The input Attenuator is turned up 50% and beyond with no effect.   The entry just says "Audio" preferences pane: "Line input" with no other available device.  Am I missing something here?   He is 4 years old and this is the first time I tried audio input.

    The line-in input on a Mac requires an entry amplified, not a single entry.

    The headphone includes a contact mic. See:

    How to use the Apple earphones with remote and mic with your Mac - Apple Support

    You can also het USB mic input devices

  • Challenges of the audio input jack (seems not work)

    Hello

    I use an HP Envy 15-j030eb, running Windows 8.1 x 64.

    Recently, I need to use my laptop audio input jack to connect my speakers, but I don't get all the sounds. I tried to connect two different types of headphones, with no audio to come through. I don't remember really when I finally used, but I'm sure it worked at some point.

    Otherwise it is inserted into the Jack, I get his normal good through the internal speakers, connect a TV via HDMI also works very well.

    I tried most of the solutions I could find online (definition of default playback device, change the bass and treble levels, do a hard reset, reinstall the drivers...), but nothing helped. Start Notepad from a live USB Ubuntu USB also translates the same behavior; play music while my works of great internal speakers connection helmet muffles all. This leads me to believe that it is not a Windows/driver issue, but a bios/firmware/hardware one.

    Run HP (from usb boot) and the test of speaker adio also doesn't send audio signal to my helmet and gives a failure code: gll3kv-6nm782-mfgjxg-20ek03. I could not decypher this identifier.

    Any suggestions on how to proceed and get my audio jack working again please?

    Kind regards

    Klmdb

    Hi @klmdb

    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I saw your post about the problems with your audio jack. I looked in that identification code of the failure that you have posted and there is an audio hardware failure which could be a couple of different things, but from what you describe, it's the audio jack that has failed.  The audio jack is not a replaceable part, you will need to seek to replace the motherboard or card mother.

  • How to get a popup when the device is plugged into the audio input jack?

    Original title - card Audio HELP

    I have a small problem that should be pretty easy to answer. A quick response would be nice. I'm new on Windows 8, and when you plug a device into the audio jack, a box used for poster asking which device is connected. Now that the box appears when I plug in a device. How do I get it to appear again? I have Windows 8, with player realtek HD audio. More info can be provided.

    Hello

    This problem can occur because of incorrect audio settings. Let's try a few steps to solve this problem.

    Method 1:
    As you use Realtek HD Audio, I would suggest trying the following steps and check if it helps.

    Enable auto-popup
    a. press the Windows key + X, choose Control Panel, select hardware and audio.
    b. scroll and select Realtek HD Audio Manager.
    c. click the icon for folder just above and to the right where it says analog panel back and just below the device's advanced settings.
    d. click Activate dialog popup automatically when the unit is plugged in.
    e. click OK twice.

    f. now, restart the computer and check the issue.

    Method 2:
    If the problem persists, I suggest you to set the headphone or speaker that you connect as a default value, and check if it helps.

    (a) right click on the volume icon in the system tray and then click on "recording devices".

    (b) right click on the space empty in the window pop up and then select "Show disabled devices" and "Show disconnected devices".

    (c) right click on the headset and then click on 'Activate'.

    (d) (d) mettre put out the microphone, then choose "set as default device".

    (e) click apply and Ok.

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • iPhone 7 lightning to the questions of the audio input jack

    I often connect my phone to listen to music on stereo systems for listening to music out loud. When I used to do with my 6s, I had no problem with the sound output. Since switching to the iPhone 7 that I need to use the adapter to play music, but when I do this the sound is very distorted and sometimes if you put the volume a bit higher up the music stops. Even with a lower volume, it is still quite distorted. When I use a headset with the adapter and plug the phone into my car is fine no problem and sounds. It is only when I play music on the radio.

    I talked to Apple support and they were not really able to diagnose the problem or give me a solution.

    I was wondering if anyone else has problems with the lightning to the audio jack connector or something similar? and everyone is aware of any other superior quality adapters, you can buy or if there is a fix by apple to do deal with this?

    I don't have the problems you describe at all.

    To the extent where a 'solution' by Apple, not sure there is any 'broken' to fix.  Anyway, we are users here on this forum, we would have no idea what Apple would do.  Speculation is prohibited by the terms of use of this forum.

    Best,

    GDG

  • Satellite C870 - I damaged the audio input jack - where to get a new?

    It seemed to me have damaged the audio jack on my laptop, does anyone know where I can get a replacement for it and advise me if it is easier to replace, or to find someone to replace it for me

    I don't very well if you want to be able to get these parts separately m.
    To my knowledge, the headphone and microphone are part of the motherboard and are soldered to the motherboard.

    However, all compatible parts can be ordered from the maintainer authorized Toshiba in your country.

    PS: maybe an alternative would be an option for you: a kind of card like USB 2.0 to 3.5 mm Jack Audio / microphone

  • No sound when the headset is plugged into the audio input jack

    When I plugged headphones into the audio jack, there is no sound.  The noise comes from the internal speakers.  I just installed System Mechanic and ran a system of analysis.  I don't know if the registry has been changed or what.  It is not a problem with the headphones; I tried another helmet and have the same problem.  The phone detects the headset, an icon in the Notifications area saying that a device has been connected.

    Inspiron 15 series 3543

    Realtek HD Audio Device

    Hello. See if it will work when you switch the driver Realtel native audio driver in Windows.

    1. open Device Manager (found in the Control Panel, or type devmgmt.msc in the search box).
    2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
    3 Select this option to "Update driver software".
    4. click on "Browse my computer for driver software".
    5. click on "Let Me pick from a list of drivers on my computer".
    6. put the "Show compatible hardware" check box if not already checked.
    7. in the list of devices, click on 'High Definition Audio"(native driver).
    8. click on "next".
    9. in the update driver warning box, click 'Yes' (the driver).
    10 restart the portable computer if you are prompted. If not invited, so no need to restart.

    [To return to the Realtek driver, do it again but reverse steps 2-7 names].

  • Color of the sheets of the audio input jack

    My records of the audio jack are colored yellow, black and green. The jacks on the new computer are orange. Green and blue. Please who is going where?

    Hi Gerald,

    -What is the brand and model of the computer?

    By default you will have Orange, green and blue color taken on a typical desktop computer. You can try to connect to different plugs and check who comes in and works.

    Microphone: Color Orange

     

    Line-in: Blue

     

    Line out: Green

    For more information, see the link.

    http://Windows.Microsoft.com/en-us/Windows/connect-audio-device#1TC=Windows-7 (Applies to Windows 8)

    Hope this information helps. If you have any questions, please let us know.

Maybe you are looking for

  • I erased my iPad 2 with the intention of him giving suite.  Now it does not open with the old password.  What can I do

    I erased my IPad 2 with the intention to follow him or to sell.  I found a job for her and decided to keep it.  Now, it will not accept the old password that I used for years...  4 figures

  • Satellite C855 - speakers suddenly stopped working

    I have a Satellite C855-1J2 running Windows 7 Edition Home Premium SP1. I turned on December 21, 2012 and installed five applications - the latest versions of Firefox, CeltX, Notepad ++, Open Office and Microsoft Security Essentials (I removed McAfee

  • Prefiltering before sampling?

    Can you please tell me if it is possible to do a lot of processing prior to sampling in LabView? Here's what I would do: Let's say I have a cRIO sampling of the many measures to 10 Hz, which is sufficient to solve the variability. Now, I want to add

  • Vista Windows slow after update

    I recently installed all new updates for windows vista (Home premium 32) and after that, my computer got real slow (for example start-up took about an hour)... Is it possible to fix this without reinstalling windows?Thanx Gabriela

  • Driver primary IDE channel necessary to install Vista

    System Card mother Intel D850EMV2 HD IDE 120 g I can do a clean install with no problems.  However, I want to dual boot with Windows 2000.  Install Vista wants me to the floppy with the driver for the primary IDE channel.  I tried the motherboard cd