Veracity of BotNet filter report?

Similar Questions

• Botnet filter Hits - reliability?

  We just one of our ASAs in a branch under license with license filter botnet and I already see a few shots in the ASDM.  My question is really about the reliability of the results.  I know with IPS sensors, it is quite common to get false positives so I want to be careful about how I treat the results on hits for botnet activity.  We performed some scans different virus on the computers that are supposed to go to malicious sites, but they have not returned anything malicious on the PC.  I don't want to dismiss these, but before you start to spend time really investigate computers and disrupt users, I want to get an idea of the percentage of reliability on botnet filters only.  Any ideas or experiences, everyone can share?

  If cela messages answers your question or is useful, please consider rating it and/or mark as answered.

  Hello Christopher,

  Exactly,.

  Normally a botnet infected host will present the behavior that this feature will prevent (go known malicious sites), but it will prevent the user will now malicious sites even before infected.

  A victory, victory, wherever you see

  You guessed it know,

  Kind regards

  Don't forget to note all the useful messages

• Filter reports

  Hi all
  
  I observed in analytical HR many of reports using filters is grouped for example two are more filters are invited and group and when we switch on the filter condition we can see option change filter group...
  
  Can anyone explain it please and how it affects the way in which we can group the filters and what is the use... I tried the group filter, but I couldn't find the filter group for reports option.
  
  http://i.minus.com/ib0f4094MOyV4M.jpg
  
  
  In the picture above you can see the hierarchy of the employee organization 1 to 12 are grouped.
  
  Thanks in advance...

  To reunification, must be at least 3 filters, once you add 3 filters, click on the first link AND who will consolidate and changed to OR.

  Just in case if you want to add the filter in the group, you can use copy icon square box and paste it into the group.

  According to me, because here, you can explore.

  Appreciate if you score as correct :)

• Update of the page-based filter filter report

  I have a simple report with two facts that shows the sales representative for the customer 1 how our activities will to their client.
  
  Fact #1: All filtered by Customer Service requests = "Customer 1"
  Fact #2: All requests for Service, filtered by customer <>"Client 1"
  
  My question is, anyone know how to make the dynamic customer and remove a page filter selection? I want to put this report on a dashboard equipped with a customer page filter, so if the user selects 8 client, the facts is updated with the appropriate filter.

  Use a session variable and filter it using this session variable.

• Botnet traffic filter

  We just renewed our botnet filter license, but when you try to update the database of dynamic filter, we receive an error. Any ideas?

  Firewall # sho dynamic filters updater-customer
  Client to update dynamic filter is enabled
  The update server URL is https://update-manifests.ironport.com
  Application name: threatcast, version: 1.0
  Encrypted IDU: 0bb93985f42d941e50dc8f022350d1a86b2dd34ec6bd041c06191df7f18f936c729210ac9fe39013f58f3edcdb53a36f
  Last updated tried at 14:31:31 EAT July 18, 2016,
  result: unable to connect to the update server
  Next update is at 00:43:25
  No database file

  Hi, I have a few questions:

  1. is DNS configured on your ASA

  2. you have another firewall or a router that could filter the connection

  3 can you post the output of 'see the activation key -'

  Thank you for evaluating useful messages!

• New feature (filter on reports)

  I just noticed that there was a new feature added in the last patch of OATS v9.10, so that you can filter reports based on a range of time. This is extremely useful, especially if you want to 'ignore' no ramp-up/ramp-down period and just take a sample while the test runs at the desired level.
  
  However, it doesn't seem to be a similar filter for graphics. Anyone know if this is possible? If this isn't the case, I hope that the service can be extended to graphs in a later version?

  Hi Ian,

  Scope time custom graphics is already available. Once a graph is rendered, click on change-> select the axis (x or y). You can change the min and the interval of maximum time for a graph (if any) or any other unit.

  See you soon
  REDA

• How can I delete a filter automatically on an interactive report when I get back

  I have several pages with interactive reports. If the user implements the filters to refine the list in the report, they are still there the user returns to that page later, even if I clear the cache.
  
  How can I make the interactive report raise the base with no additional filter report when the user returns to the page?
  
  Thank you

  The doc of the APEX to the http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/app_comp.htm#sthref989

  >
  To restore an interactive report in a link, use the string "RIR" in the section Cache Clear of a URL. This means the user choose the Reset option in the menu interactive report actions on the target page. The report is returned to the default report parameters specified by the developer.
  >

  CITY

• How to allow the user to filter the report data?

  I read a lot of entries on this topic related to interactive reports. From what I can tell, the version we are on... 3.0.1.00.08, does not have the 'classic' vs 'interactive '. So, can someone recommend the best way for me to allow the user to filter report results? Specifically, the user wants to be able to see only active records, but I also want that they want to see all documents (active and inactive).
  
  Thank you
  Kristina

  Kristina,

  You can add a list "select" to your page. Calling it something like P1_LIST and add it to your where clause as...

  select
  col1,
  col2,
  col3
  from table
  where col2 = decode (:P1_LIST, '-1', col2, :P1_LIST)
  

  You can set the LOV to auto-submit or have a 'Send' button so that your report is filtered according to the value of P1_LIST.

  Also, in the properties of your selection list, set the 'Null view' to 'Yes', 'Display Null value' to something like 'ALL' (or whatever text you want) and the "Null return value'-1 (or whatever value you have in decoding).

  I hope this helps.

  -Chris

• How to plan the report filtered by dynamic date based on the date, the Agent is running

  Hello

  I have a question about account using OBIEE agent.

  If I run an agent today to deliver A report, can I me A report based on the date of last Monday or any dynamic dates?

  For example, say is today, December 18, 2013, and my agent is run according to how I put the calendar. Now the content of the delivery report one being delivered. Now A report has a date column, normally this column is filtered by the current date. But if it comes through the agents to different users, the data should be the previous Monday, so in this case, 9 December 2013. When this agent is run once again, declared December 27, 2013, then the report must be filtered by December 16, 2013, which is the previous Monday 27 dec.

  Something like this is possible in OBIEE 11 G?

  Thanks in advance.

  Yala,

  Not in a straightforward way

  (1) let the report through Agent with filter current Date

  (2) after he ran for the first time you can see IBOT name/last execution time (LAST_RUNTIME_TS) in S_NQ_JOB

  Create a variable reference 'last_run_agent' to aid in sql to get max (LAST_RUNTIME_TS)

  SELECT max (LAST_RUNTIME_TS) from s_nq_job, whose name = "AGENT_NAME;

  Change analysis with current date filter report and amend accordingly the condition of filter to filter on repository variable, newly created

  Thank you

  Angelique

• OLIVIER Dashboard and dashboard invites to relax BI Publisher dashboard report

  Hello
  I have some problems with my dashboard prompt to filter reports to BI Publisher (the same dashboard as guests).
  Creating a logical column with a value of sort = ID (int) and a display = text (varchar) value has worked
  fine and I can select the logical column and test it but when I put on my dashboard and click 'apply '.
  nothing happens. The BI Publisher reports do not "load" with the values of the command prompt.
  2 guests are set up to write in a presentation variable named exaclty like settings
  in the BI Publisher report data model.
  Any ideas why it does not work? What I have to say the BI Publisher reports that the entry of the value that they
  Wait comes from a line of dash or so?
  
  PS: When I open the report only (not the dashboard) put in my two settings and press run it works fine.

  I gave up on it, and now the parameter passing everything happens by using the descriptive strings rather than IDs.

• Lint trap fails with the Classes of LV

  LV2013, LVRT 2013, Win7

  I'm working on a large (1600 + screw) of the project, for a few years now.

  Long ago, I created a program of "lint filter.  Here's what it does:

  1... make a list of all the files in all of the LLBs in the project folder and subfolders.

  2... to read a file of EXCLUSION and remove screws specified in the list.

  3 open... all HAND screw for programs (one by one).

  4.. remove this VI from the list.

  5... find out all subVIs called by this main VI. Remove them from the list.

  6... find out all subVIs called by THESE subVIs.  Remove them from the list.

  7... repeat 3-6 until all screws are covered.

  All that is left is "Lint" - live have any appellants.  If it's a dynamically called VI, I put in the EXCLUSION list and run again.

  The point is the discovery of false starts and screws I created, but not a not end up using.  I can then delete those and keep the code free of lint.

  Everything works beautifully for years, until I started to use objects (LV).  For the last month, I was including a descendants of class and severel parent in the project.

  The project works.

  However, it has generated a lot of fluff.  Some of the old code has been replaced, and I made a few false starts, he didn't screw is not used.

  The problem is - the lint filter reports now over 200 lint screws, some of them I know are really. (If I remove one, the main VI is broken).

  I traced the problem to the fact that the Classes appear to be invisible.

  Here's some code that continues the screw and subVIs, etc.. :

  

  The problem is - the exit CALLED this property node does not list all the LVCLASS elements, or any screws that take an entry CLASS.

  Even a simple test cases, and with a constant of CLASS and a CLASS VI, will not be displayed.

  Any normally called VI is in the list, but if it is related to a class, it is forgotten.

  Anyone have any ideas on how to make lint filter works in this case?

  Technical support comes through (thanks, Chris!) with a response:

  Given a reference of VI, there is a method (call the node) called GET VI RELATIONSHIPS that can be used.

  There are all sorts of options, which must INCLUDE all OVERRIDES THEM.

  I guess that will always leave a substitution that I wrote, but never actually call.

  Yet, this is a great step in the right direction, and it is MUCH faster than through the chain myself.

  

• Facebook is blocked... page protection antivirus... takes you to a page where you purchase protection... I have norton already... don't let me use facebook

  Facebook is blocked... page which wants to buy me a virus... says my computer protection is attacked... norton is woking and said everything is fine... but can not use facebook... page continues to block the appp

  update your Norton and a full system scan. The latest version of Norton 2010 version (currently), you have updated free option to that, contact technical support for Symantec and help for the update and also helps it remove malware.
  The support link is:

  http://www.Symantec.com/support/index.jsp

  Also, I recommend you to log on to the suite of site Web and full scan and remove risk: http://onecare.live.com/site/en-us/center/whatsnew.htm

  It's probably a fake anti-virus that try to convince you to buy it.
  If you are using Internet Explorer 8, it should be block but if not, try to go to the security-> SmartScreen filter-> reported as unsafe

• screen freezes during the game, flashing white, go to the desktop, then flashes back to the game

  I need help to yall! So I had this problem when I play games, once from time to time the screen freezes, flashes white, go to the desktop and then back to the game. Seems to happen more frequently when a lot is happening at the same time during the game. I ran the windows performance test and return these errors

  Error

  Symptom: Device drivers are not installed. Cause: A driver has not been installed for this device to operate properly. Details: The device for Universal Serial Bus (USB) driver Controller has not been installed. This device won't be available until the appropriate device driver is installed. Resolution: 1. try to install the drivers using Windows Update. 2 install the drivers located on the installation media that came with the unit. 3. check with the manufacturer for an update pilot. Partners: Explanation of Error codes generated by Device Manager Symptom: Device is not present, not working not properly. or does not all its drivers installed. Cause: A device has a configuration problem that It prevents from functioning correctly. Details: The device, light WinpkFilter filter, report "tv_ConfigMgrErr24". This device won't be available before the question is resolved. The Plug and Play ID for this device is ROOT\LEGACY_NDISRD\0000. Resolution: 1. check that the correct driver is installed. 2. try updating the drivers using Windows Update. 3. check with the manufacturer for an update pilot. 4. try uninstalling and reinstalling the device by using Device Manager. Partners: Explanation of Error codes generated by Device Manager Manage devices in Windows

  I tried their update and uninstall the universal periodic publication of bus drivers. I don't know what to do about the other error. He also told me I need to more memory, but would not fix these errors.  If anyone can help I would really appreciate it!

  Manufacturer	BIOSTAR Group
  	Model	TA970
  	Total amount of system memory	8.00 GB OF RAM
  	Type of system	64-bit operating system
  	Number of processor carrots	4

  Type of view map NVIDIA GeForce GTX 750 Ti Total available graphics memory 5884 MB Dedicated graphics card memory 2048 MB Dedicated system memory 0 MB Shared system memory 3836 MB Graphics card driver Version 21.21.13.7270 Main monitor

  
  resolution 1920 x 1080 Version of DirectX DirectX

  Network card Realtek PCIe GBE Family Controller

  Thank you for coming back to us.

  It could be two or three reasons why you experience the problem regarding the World of Warcraft online game. Windows might need to install all important updates, there could be corrupted in the system, outdated driver files or the size of the memory.

  We suggest you to check and install all important Windows Update.

  If the problem persists you can update graphics cards via the Device Manager.

  • Press Windows key + R, type devmgmt.msc , and then click OK.
  • Double-click display adapters.
  • Double-click graphics card.
  • Click driver , and then select set to update driver.
  • You can select the following:
    • Automatically search for an updated driver.
    • Browse my computer for driver software.

  Let us know how it goes.

  Kind regards.

• jQuery ui datepicker inconsistency

  I'm trying to influence the behavior of a popup datepicker in a region of interactive report and getting inconsistent results. I use v4.2.4.00.08 Apex

  I created a SORT on a table with a date column. Once created, I use Actions = > filter, then select the date column. I use generally between the operator and select the date picker icon to select dates. (I intend to make a saved filter report).

  I need to change the datepicker popup to allow the user to see more than one month at a time. With a few tries, I added this code in the Page = > Javascript = > function and Global Variable declaration:

  {$(document) .ready (function ()}

  change to display 3 months at a time and a sign of button to select today

  $. datepicker.setDefaults({)

  ({'numberOfMonths': 3, 'dateFormat': 'JJ-M-AA', 'showButtonPanel': true});

  });

  I go back to datepicker and successfully get 3 months in the context menu and the Panel down with close buttons and today. However, I really want that month and year like select from drop-down menus. I now make this change to the Javascript:

  {$(document) .ready (function ()}

  change to display the month and year as select in the drop-down menus

  $. datepicker.setDefaults({)

  ({'changeMonth': true, 'changeYear': true, 'dateFormat': 'JJ-M-AA', 'showButtonPanel': true});

  });

  DatePicker returned to the single month pop-up window, select no menus, but the Panel remains. My question is why is the datepicker editable with a default value, but not another? I tried the sandbox sand Apex v5 adopteur early and had the same results.

  Thank you

  Kelly

  This is because as the bodies to initialize some of the options, that are not replaced by setting global values by default. It is that changeMonth and changeYear are two of them. Same behavior for an ordinary page element, incidentally, where the selection lists are an attribute for the element and false as a default value.

  When the filter Panel is open certain HTML is retrieved on the server, and this includes the initialization of date picker:

  (function(){apex.widget.datepicker("#apexir_BETWEEN_FROM",{"buttonImage":"\u002Fi\u002Fasfdcldr.gif","buttonImageOnly":true,"buttonText":"Popup Calendar: ","showTime":false,"defaultDate":new Date(2014,9,14,07,15,52),"showOn":"button","showOtherMonths":false,"changeMonth":false,"changeYear":false},"dd-M-y","en");})();
  (function(){apex.widget.datepicker("#apexir_BETWEEN_TO",{"buttonImage":"\u002Fi\u002Fasfdcldr.gif","buttonImageOnly":true,"buttonText":"Popup Calendar: ","showTime":false,"defaultDate":new Date(2014,9,14,07,15,52),"showOn":"button","showOtherMonths":false,"changeMonth":false,"changeYear":false},"dd-M-y","en");})();
  

  As you can see, the changeMonth and changeYear set to false. Change the overall default values so will not influence these options. To do this, you need to change the option in the instance itself. Challenge with that though is that there is no check mark to know when the Panel has loaded... There are only the means hacky.

• Guest cascade

  Hi all
  Write custom SQL, then select list of values from different tables and how to pass values to the State to manage the waterfall guests
  
  Thank you

  Just make use of variables of presentation here to set up guests... and filter reports based on variable presentation. It shud work well