Verify Signature XML - Signature status UNKNOWN

Similar Questions

• When I start the listener, I get the following "status UNKNOWN"...

  Oracle 11g R1 on Oracle Enterprise Linux
  
  
  Here is the configuration of my listner
  **********************************************************************
  [oracle@oracle-test admin] $ cat listener.ora
  listener.ora # Network Configuration file: /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
  # Generated by Oracle configuration tools.
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME=/u01/app/oracle/product/11.1.0/db_1)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (GLOBAL_DBNAME = orcl.o - test.mydomain.name)
  (ORACLE_HOME = u01/app/oracle/product/11.1.0/db_1)
  (SID_NAME = orcl)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xx.xx.xx) (PORT = 1521))
  )
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  )
  )
  )
  
  *************************************************************************
  
  
  
  
  When I start the listener, I get the following messages of "Status UNKNOWN".
  
  
  Why?
  
  
  
  [oracle@oracle-test bin] $. / lsnrctl start
  
  LSNRCTL for Linux: Version 11.1.0.6.0 - Production on February 19, 2010 11:22:04
  
  Copyright (c) 1991, 2007, Oracle. All rights reserved.
  
  From /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr: Please wait...
  
  TNSLSNR for Linux: Version 11.1.0.6.0 - Production
  System settings file is /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
  Log messages written to /u01/app/oracle/product/11.1.0/db_1/log/diag/tnslsnr/oracle-test/listener/alert/log.xml
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=xxx.xx.xx.xx) (PORT = 1521)))
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=xxx.xx.xx.xx) (PORT = 1521)))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for Linux: Version 11.1.0.6.0 - Production
  Start date February 19, 2010 11:22:04
  Uptime 0 days 0 h 0 min 0 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora file
  The listener log file /U01/app/Oracle/product/11.1.0/Db_1/log/diag/tnslsnr/Oracle-test/listener/alert/log.XML
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=xxx.xx.xx.xx) (PORT = 1521)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
  Summary of services...
  Service 'PLSExtProc' has 1 instance (s).
  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
  Service "orcl.o - test.mydomain.name" has 1 match (s).
  Instance "orcl", status UNKNOWN, has 1 operation for this service...
  The command completed successfully

  There is nothing to worry about it. UNKNOWN means, the listener knows the orcl SID because of the list of SIDS. This is called static record. If your instance orcl's up, PMON dynamically registers the listener (if you are using port 1521 without additional configuration), which leads to a READY State.

  Kind regards
  Uwe

  http://uhesse.WordPress.com

• Connection status: unknown, the dependency service or group could not start

  When I point the cursor on the network connection icon in the task bar is showing the message "Connection status: unknown, the dependency service or group could be started. But I always try to connect to the internet, if show a popup message 'The Wizard Error Message' with an error

  Component GUID: {7071ECA3-663B-4BC1-A1FA-B97F3B917C55}

  Component file: [C:\Windows\system32\connect.dll]

  Error: (0x8007277B)

  Additional information:

  Could not detect Internet connectivity
  If I always neglect the error and try to connect to the internet then system shows a message "The wizard cannot create the connection"...
  I would be grateful if someone could suggest the solution other than restart the system...
  I use windows vista as operating system...

  Hi Gattu,

  Please contact Microsoft Community.

  It would be great if you can answer the following question:

  Were there any changes made on the computer before the show?

  Follow these methods to solve the problem:

  Method 1:

  See the article and check if that helps:

  Network connection problems

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-network-connection-problems

  Method 2:

  I suggest you check out the link to use the System File Checker tool (sfc) to troubleshoot missing or corrupted system files in Windows:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  I would also refer to article to reset the Internet Protocol (TCP/IP)and check if it helps.

  Method 4:

  I suggest to disable the antivirus software and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  If you are still experiencing a problem, please reply and we will be happy to help you.

• Connection status: unknown. The dependency service or group was able to start.

  Greetings!  I have a year old Dell Inspiron.  Everything worked fine last night, but when I woke today I couldn't connect to the internet.  When I put the cursor on the network icon, it says "connection status: unknown."  The dependency service or group was able to start. "My Windows Firewall is also disabled and I can't activate it automatically or manually.  In addition, the Windows Diagnostic tool cannot be turned on, and whenever I try to activate the Diagnostic Policy Service it also can not be done. It says "error 5: access is denied" when I try to turn it on manually.

  My antivirus (Avira) software is fully up to date from last night.  I even took it into Best Buy and they did a diagnostic test to ensure that a virus is not the cause.  The guy there said it was a software problem.  I tried resetting TCP/IP (netsh winsock reset) without success.  I also tried sfc/scannow in safe mode and windows without success.  Are there other options?

  Thanks in advance.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• Connection status: unknown, the dependency service or group could be started. __Windows could not start the DHCP Client service on Local computer. Error 5:Access is denied.

  Good evening!

  About 2 days ago my laptop not able to connect to the internet with wireless on, a brand of red x on the computer icon in the bottom right. When I hover the mouse over this icon, it shows ' connection status: unknown, the dependency service or group could be started. " I check services and found DHCP stopped running, I tried to start it manually, it shows "Windows didn't start the DHCP Client service on Local computer." Error 5:Access is denied. "I did ' sfc/scannow' and found no errors.
  I use a laptop from my friend and it works great! So there is nothing wrong with the router but my own laptop. My laptop runs windows Vista editions Home Premium with Service Pack 2.

  Need help! Please, need to connect to the internet to go to school online. Thanks in advance for any help!

  Very respectfully,.
  Jay2010

  Hello
  Failed to start the Service on the local computer's DHCP Client (applies as well to Vista)
  http://WindowsXP.MVPs.org/DHCP.htm

  ----------------------------------------

  Start - type in the search box-> find CMD top - right on - click RUN AS ADMIN

  You can copy and paste this command, and then press enter

  netsh winsock reset catalog

  ======================

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ----------------------------------------

  Try setting all Windows services on their default values.

  Start - type in the search box-> find Services at top - right click - RUN AS ADMIN

  Vista default services
  http://www.blackviper.com/WinVista/servicecfg.htm

  ---------------------------------------

  Actually try updating your driver: (use a wire or download on another computer and transfer via)
  removable media)

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------

  You can get more help in these forums.
  http://social.technet.Microsoft.com/forums/en/category/windowsvistaitpro

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• HP Battery Check status: unknown (90)

  HP dv4-2165dx running Windows 7 64 bit with Support Assistant 5.2.9.2 and battery check 4.0.16.0

  Battery status says 'unknown', with the 100% battery charge.  Battery seems to work very well, but not checking the battery does not seem to be able to connect to it.

  When you run the battery check, it returns

  Status: Unknown (90)

  The long description is:

  Main battery

  An error occurred trying to access the battery.  Please re-insert the battery and the power adapter for a new test of the battery.

  The suggestion is to turn it off, replace the battery and AC power, I did several times.  I also followed the procedures outlined in another post about a battery check status unknown (94)... but no change.

  How can I correct this condition such that I can get a battery status check valid, like 'OK', 'Calibrate', 'Replace', etc.

  Is there a * easy * way to clean the battery contacts?

  Note: Diagnostics of HP you can run before Windows (tube exhaust when starting) indicate that the battery is "defective", perhaps because the diagnosis can also access chip smart battery.

  There is no other assignments by mentioning the battery... check (90) advanced status code just to code (94) elsewhere.

  Thanks for your help.

  db808

  Found the solution!

  There is a new version of firmware, version F.0F (appears as 'F' to the poster information) which is available in the download section software.  Version F.0F is documented as the resolution of a problem with checking Service Advisor 5.x and battery.

  I downloaded the firmware update, installed and then re-directed to battery check.  Now I have a proper status, with detailed battery status is displayed.  In my case, the battery is about 2 years old and needs to be calibrated.  But I now have a status legitimate and can go through the calibration process.

  Note: I use Advisior of Service 5.2.9.2 and says there is no update additional software that apply... .but Advisior Service missing update of Firmware and will not download and install it.

  According to the notice of Release Firmware, this firmware version applies to several laptop models.

  After I calibrate my battery, I'll try running battery check and start diagnostics.  Diagnostics boot time also scored as battery being defective in the past... with the older firmware.

  I'll post my results once completed.

  Hope this helps someone.

  db808

• 5.1 ESXI health status: unknown

  Hello

  I have a HP PL DL380p G8 and ESXI 5.1 with essential kit. Everything was ok, but after months, I got in the health configuration tab: unknown.

  Bit is all ok, server is running, and I don't find any hw problem.

  Why is-status unknown health?

  Thank you.

  Hello

  Restart management agents.

  How? Look here:

  Management for the restart ESXi (ESX 3i) agents

• ORA-12514 & listener State Instance status unknown issue

  Dear all,
  
  Version of database - 10.2.0.5.0
  Operating system - Windows XP
  
  I'm using the version of Oracle 10 g, who has two services (bit10g and ora10g) is installed.
  Ora10g service was operating prior to upgradation of database at 10.2.0.5.0 and it was fine.
  On upgradation I was unable to start and connect using ora10g so I created another which is bit10g.
  
  Bit10g service worked fine for quite a long time. The last I have worked and connected was the game and it connected no problem.
  
  Now, when I'm trying to connect to the database today I am unable to connect because I'm
  ORA12514 - TNS:listener is not currently in service.
  
  Second, I tried to search the forums which led me to check the status of the listener.
  

  Microsoft Windows XP [Version 5.1.2600]
  (C) Copyright 1985-2001 Microsoft Corp.
  
  C:\Documents and Settings\Admin>lsnrctl status
  
  LSNRCTL for 32-bit Windows: Version 10.2.0.5.0 - Production on 12-JAN-2013 11:42
  :54
  
  Copyright (c) 1991, 2010, Oracle.  All rights reserved.
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=toshiba-arif)(PORT=1521)
  ))
  STATUS of the LISTENER
  ------------------------
  Alias                     LISTENER
  Version                   TNSLSNR for 32-bit Windows: Version 10.2.0.5.0 - Produ
  ction
  Start Date                12-JAN-2013 11:18:12
  Uptime                    0 days 0 hr. 24 min. 43 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Listener Parameter File   C:\ora10g\product\10.2.0\db_1\network\admin\listener.o
  ra
  Listener Log File         C:\ora10g\product\10.2.0\db_1\network\log\listener.log
  
  Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=toshiba-arif)(PORT=1521)))
  Services Summary...
  Service "Oracle8" has 1 instance(s).
    Instance "bit10g", status UNKNOWN, has 1 handler(s) for this service...
  The command completed successfully

  Here is my listener.ora file
  

  # listener.ora Network Configuration File: C:\ora10g\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
    (SID_LIST =
      (SID_DESC =
        (GLOBAL_DBNAME = Oracle8)
        (SID_NAME = bit10g)
      )
    )
  
  LISTENER =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = toshiba-arif)(PORT = 1521))
    )

  Please note that I am a developer without exhibition s/n.
  So please guide me so that I will be able to solve my problem.
  
  Thanks and greetings
  
  Arif Khadas

  S/O-error: (OS 1502) the event log file is full.

  That's your problem...

• Replication status UNKNOWN?

  I have a suffix of data using the configuration information of Solaris and the DSCC suffix that both configured for multimaster replication over SSL ports. I tried in every way that I've been able to think of this day, and they seem to work. What confuses me is the output of the status command (the two suffixes show similar output):
  
  $ dsconf see the repl-agmt-registered - p 3998 w/var/opt/SUNWdsee7/dcc/ads/config/dsadmpwd cn = dscc host1.company.com:3999
  Cannot bind firmly on 'host1.company.com:3999' with the specified credentials.
  
  Configuration status: UNKNOWN
  Authentication status: UNKNOWN
  Initialization status: UNKNOWN
  
  Status: enabled
  Date of last update: October 20, 2010 14:00:26
  
  There are two things that bother me:
  
  First of all, the "Unable to bind solidly" line. If she cannot bind firmly, then how replicates data?
  Second, how should I interpret the status "UNKNOWN"? Is this normal with SSL? If this is not the case, what should I watch?
  
  Thank you
  Chris

  Don't worry about the UNKNOWN status, etc... This is shown on a system that works as well.
  With regard to the SSL protocol, if you want to connect using the Protocol ssl no, add e option

• Windows Live Mail - error verifying signature of emails cause multiple entries rfc822

  Is this a known bug, Windows Live Mail displays an error in the verification of signatures, if the signing certificate has multiple rfc822 entries in the subject alternative name extension and not the "first" is used to sign email? Is there a solution?

  See: A question of Hotmail or Windows Live Mail?
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/have-a-Windows-Live-Mail-or-Hotmail-question/8bd31c48-d1a7-49D6-a08c-9069aaeba2e5

• When I digitally sign my document is valid, but when I send it to others they see digital signature as unknown

  I need to digitally sign documents. When I sign in my pc all the signatures appear as VALID. Then, I send them by e-mail, but when they open these documents, they are presented with signatures STRANGERS. It seems that they are only valid in my pc.

  In this case, create a trusted certificate.

• Acrobat XI unlock verified signatures

  We use an external signature (Signature Gem) buffer to have patients sign documents that exist in their electronic cards. Once the signature buffer has been used, the diagram is locked.  We are no longer able to add, modify or delete any element of the array.  We are using Acrobat Standard XI.  How can I change this setting so that we can use the external signature stamp and continue editing the graph?  Thank you!

  A digital signature can be locked. It seems that your signature. Do you get the dialogue of 'Sign' of the standard Acrobat, like this (this one is from Acrobat DC, but in Acrobat XI is similar):

  

  If you do, then look at the box "lock after signing the Document. If it is checked, then the created signature will be locked. Clear this check box. If you do not get this dialog box when the signature, dialogue which, if any, get you? It is possible that the software behind your created signature signature buffer forces must be blocked. In this case, you should ask the provider signature stamp for instructions.

  The other possibility is that your PDF estcertifie and certification authorities do not permit the actions you want to apply. But in this case you would not be able to perform these actions before you sign, which is not the case according to your description.

• The document "will be sent for signature" status

  I'm the second person to sign a document. I sent for signature and the other person has said that they have signed. When I check the history on the document, it is said: "will be sent for signature Chad Stewart (my email)" "

  It is in this State since a day or two. How long until I get actually a request to sign? Is there a way to log in and sign it immediately?

  I ask him to sign and sign in again, and he says it will even let him see it.

  Hello

  Contact our support team that we can examine the real deal for you.

  Please provide the name of the document, e-mail address and the transaction date for the document in question.

  Thank you

  Jat

• CSCuj81593 - failover interface ASA tracking status unknown after active reload

  Hello

  We use the software Version 9.1 (4) on ASA 5545.

  When you switch to show, we get the following result:

  This host: primary: enabled

  Activity time: 10847 (s)

  slot 0: ASA5545 hw/sw rev (status 1.0/9.1(4)) (upward (Sys)

  Interface to the outside (83.236.222.116): unknown (pending)

  Interface inside (172.17.220.130): Normal (pending)

  Management interface (0.0.0.0): link down (not guarded)

  Another host: secondary - ready Standby

  Activity time: 448 (s)

  slot 0: ASA5545 hw/sw rev (status 1.0/9.1(4)) (upward (Sys)

  Interface (0.0.0.0) outdoors: unknown (pending)

  Interface (0.0.0.0) inside: unknown (pending)

  Management interface (0.0.0.0): link down (not guarded)

  The problem is that the interface tracking does not work.  If the ethernet on the inside (or outside) interface cable is removed, we do not get a failover.

  Can anyone make a suggestion please?

  Donald

  Hi Donald,.

  'Re missing you the "Standby" IPs on each interface.  This is necessary for the failover interface followed.  Once you assign day before IPs, the output of "show failover" display these files directly on the device in standby, and interfaces will be from 'pending' to 'Normal '.

  Sincerely,

  David.

• DBaaS monitor: status unknown, but fine DB

  On a new DBaaS, the DBaaS Monitor Console display unknown state.

  

  
  

  The EM Console shows that the DB is in good health. No errors in the log of alerts. With the DB connectivity is very good. The listener is in place.

  Restart the DB and the recipient has not solved the problem.

  
  

  How can we solve console DBaaS Analyzer?
  

  This is a known bug that is fixed on the operating system, u01, there is a file defaults.xml. The SID of the DB got hardcoded for ORCL... so just change the SID to your DBs SID.