vertical alignment problem table

Similar Questions

• Vertical alignment problems HP Photosmart D110a on A5 paper

  Hello, I would like to know if someone could help me with this question:

  I have problems of vertical alignment to print on A5 paper on the photosmart d110a.

  Printing of text will leave 10 cm from edge of paper even though I have no room to set up.

  I use Mac OS X 10.8.3 on a Mac Book Pro with the retina display.

  Clues?

  Thank you very much!

  Leandro

  I recommend you to install the driver of HP, if available for your version of Mac OS X. You will need to install the driver of AirPrint and sometimes the HP driver work better than AirPrint.

• vertical alignment in tables

  I converted a Robohelp 5 project to Robohelp 8. Since then, I've noticed that the HR Center aligns the contents in table cells even if vertical alignment toward the top of the cell is selected. This seems to happen more often if the text drop-down DHTML table. Is there a way to force the vertical alignment upwards in the cells without having to recreate the table?

  A similar question was published in the forum for more than a year for an earlier version of HR but was never answered. Here is the link: http://forums.adobe.com/message/93790#93790.

  There is a bug in RH8. The alignment of your output will be OK.

  See www.grainge.org for creating tips and RoboHelp

• Vertical alignment problem

  Hello.

  I'm really dense or something wrong with the way of working alignments.

  I took the basic HelloWorld application and tried to simply align the text:

  Page {
      Container {
          horizontalAlignment: HorizontalAlignment.Fill
          verticalAlignment: VerticalAlignment.Fill
          Label {
              horizontalAlignment: HorizontalAlignment.Center
              verticalAlignment: VerticalAlignment.Center
              // Localized text with the dynamic translation and locale updates support
              text: qsTr("Hello World") + Retranslate.onLocaleOrLanguageChanged
              textStyle.base: SystemDefaults.TextStyles.BigText
          }
      }
  }
  

  So as far as I understand it, the container must snuggly fill available about heigth (vertical) and width (horizontal) space.

  If the label should be centered in two dimensions as well. But when I run it, the label only centered horizontally, but not vertically.

  I deceive you somewhere? I didn't I'd be able to get something wrong so fundamentally easy.

  Looking forward to your answers.

  Best regards

  Wildcat

  The default layout for a container is a StackLayout fixing things up and down. You can use the DockLayout to center the text like this:

  Page {
      Container {
          layout: DockLayout {}
          horizontalAlignment: HorizontalAlignment.Fill
          verticalAlignment: VerticalAlignment.Fill
          Label {
              horizontalAlignment: HorizontalAlignment.Center
              verticalAlignment: VerticalAlignment.Center
              // Localized text with the dynamic translation and locale updates support
              text: qsTr("Hello World") + Retranslate.onLocaleOrLanguageChanged
                  textStyle.base: SystemDefaults.TextStyles.BigText
          }
      }
  }
  

• Unable to get the elements placed at the top and bottom of the cell of the table with vertical-align

  Hello

  I have a three-day educational courses in the list table. In each cell, I have the title of the presentation at the top with the name of the speaker below. Because some titles are longer than others, the line grows (rightly) as longer securities are covered in Word. So far so good. Now, I want all the titles to always start at the same distance from the surface of the cell (I use padding 2px) and names of speaker all be equidistant from the lower border, (i.e. 2px).

  I tried to place the title elements with < span style = "vertical-align: top" > </span > presentation title

  and the name of the speaker as < span style = "vertical-align: bottom" > name </span > Speaker

  and I tried the same method with < div > and < p > tags. Items don't move. Can someone tell me how to make the names of the speakers will be all aligned at the bottom of each cell?

  Here is an example of the code table I've tried:

  (Thanks!)

  < table style = "text-align: center;" do-family: Arial; background-color: #f7d49c; "border ="2"bordercolor =" #467E9F "cellpadding ="2 ".

  "cellspacing ="0"width ="900">"

  < tbody >

  < b >

  < td width = "300" > < span style = "" vertical-align: top; "> This is a short title </span > < br / >"

  < span style = "vertical-align: bottom" > name </span > < table > Speaker

  < td width = "300" > < div > is the title of another presentation, which is really long because some of the presentations have titles like that < / div > < br / >

  < div style = "vertical-align: bottom" > Speaker name < / div > < table >

  < td width = "300" > < span style = "vertical-align: top" > This is yet another presentation with a semi-long title </span > < br / >

  < span style = "vertical-align: bottom" > < table > </span > Speaker's name

  < /tr >

  < b >

  < td > < table >

  < td > < table >

  < td > < table >

  < /tr >

  < b >

  < td > < table >

  < td > < table >

  < td > < table >

  < /tr >

  < b >

  < td > < table >

  < td > < table >

  < td > < table >

  < /tr >

  < / tbody >

  < /table >

  By default, the content of the table cell is average aligned.  You need not do anything.

  If you want your cell vertically aligned up or down, you can specify it in your CSS.  These effects all the text inside the cell.   It's all or nothing.

  Some text that is aligned at the top

  Some bottom-aligned text

• Lose the vertical alignment of the table during the conversion of the ditamap to book

  FrameMaker Version: 12.0.4.445 (later part of TCS5)

  1. I have a project structured, where several XML files have been grouped in a ditamap.
  2. For one of the XML files, I have a table, where I need to set the cell Vertical alignment of cells in the MIDDLE.
  3. So using Paragraph Designer > table cell, I have change the entries in the top in the Middle (the default values have been Top).
  4. With the ditamap pane selected, I'll then menu file > > Save Ditamap under
  5. I save ditamap as ' book with fm components 12.0 (* .book) "file type.
  6. In the resulting book, the XML files are now. FM files.

  However, at this point, when I open the. File of FM which has the table, the cell styles back to the TOP.

  I searched high and low for a similar problem. It's look like a bug to me, but can someone confirm?

  Thank you

  No, this is not a bug by itself. I bet that the alignment is lost before you generate the book. After you set the alignment and saving and closing the file... reopen and see if the alignment is still there... I bet it's gone. As a general rule, you cannot apply put in shape or properties to objects (elements) in a DITA file. This applies to font and paragraph properties as well as table set in shape and other types of development in the form. All you can do is create items and set attributes. Any parameter properties will usually be lost on file save.

  You would probably need to have a 'process of publication' (script any) you run your generated book and chapter files that would scan for an attribute that shows some properties must be set on the table. The @outputclass attribute is typically used for this kind of thing. I'm not aware of what anyone in default FrameMaker DITA, who put in place to manage this type of formatting of the tables.

  If this formatting that you try to apply is consistent for the whole table, it is possible that you will be able to do this by creating a new table format that has this set of default formatting. When you insert a table in a subject, the table format is assigned to the tgroup/@outputclass attribute and this is the form that is used when rendering the table. Just create a new table in the structured application model and put in place this format to have the properties you want. Then, when you insert the table, be sure to select this format. It can be hard to set this up, but it * should * work.

  However, if this does not work, or you need more refined formatting applied to the parts of the table, I produce a tool called DITA-FMx, which offers extended DITA creation and publication of the options for FrameMaker. It offers features that allow this type of table set shaped to be applied by setting the attribute @outputclass to a specific value on the line or cell. You can get more information on DITA-FMx here...

  http://leximation.com/DITA-FMX/

  Good luck!

  Scott Prentice

  Leximation, Inc..

  www.leximation.com

• I have a problem with CSS vertical align. Help!

  This could be an easy fix, I don't know... but I've been customized style BC Photo Gallery and lightbox on this site that I'm doing for a photographer and I got a problem with the vertical alignment.

  I created my own .css document to replace styles Viewer by default in British Colombia, and now all I'm left with tries to Center vertically the lightbox image. I googled some methods and tried, but had no luck...

  http://michaellaphotography.BusinessCatalyst.com/Gallery-pages/weddings

  Check out the link, and when you click on any thumbnail, you'll see what I mean.

  I know I can't use filling methods, because I work with pictures in portrait and landscape.

  Thanks for your help!

  The light therapy device you use made for the creation of a larger full size of the image.  As a general rule, if you have a portrait image that is larger that the screen of the user enough scroll a little more.

  If you temporarily remove the CSS for "img #lightbox" on line 20 of myStyles.css you'll see how lightbox works in native mode. This should be good since the user wants to zoom and see a bigger picture when they click on it and it will be as big as possible on their screen.

  Once you see what I mean with the changes, I can tell you how to make sure the portrait images do not expand to full height and beyond the viewport. Rather than delete the CSS "img #lightbox" statement like I said before, this time change for:

  #lightbox img {}

  Width: auto;

  height: 100%;

  }

  This will ensure the images in the light therapy device take 100% of the height of the lightbox container and the width dimensionnera automatically to keep the proportion of the image. Landscape photos will be large and landscape photos will not be larger than the viewport.

• table alignment vertical alignment

  Hello

  I have a table and I want to insert a table in one of the cells. I want the new table to align to the top of the cell.  It's a bit shorter that the table I am put in and it's centered.

  Is this possible?

  Here's the code...

  <!-TABLE of the image gallery / width 800/height = 522->

  < table width = "800" height = "522" border = "1" id = "imagegallery" >

  < b >

  < td width = "170" > < table width = "170" border = "1" valign = "top" >

  < b >

  < td > < table >

  < td > < table >

  < /tr >

  < b >

  < td > < table >

  < td > < table >

  < /tr >

  < /table >

  < table >

  < td width = "614" > < img src = "images/desert_cool.jpg" alt = "mainpic" width = "618" height = '516' align = "top" id = "Image1" / > < table > "

  < /tr >

  < /table >

  I have already explained this to you in my previous post:

  Change your line 80 following HTML files:

  style = "" vertical-align: top; " " >

  Note that I deleted valign = top of the new tag table in this line

  Or, you can set this in the CSS like

  {.tdtop}

  vertical-align: top;

  }

  and use it in your HTML code

  class = "tdtop">

  The vertical-align attribute must be applied to the container containing the content, not in the content.

• Vertical alignment of the table cell can be defined via CSS?

  In a table cell (IE, 'td') is it possible to define "valign" via CSS, instead of table cell appropriate?

  In other words, instead of...

  < table >

  < b >

  < td valign = "top" >

  .. is it possible to do:

  < table >

  < b >

  < class td = "top" >

  .. somehow, .and allow the stylesheet to define the vertical alignment?

  I ask because none of the attribute in Dreamweaver CS4 presets seem to provide for vertical alignment. Everything on God's Green Earth seems to be there, but the vertical alignment of the cell table seems to be the ONLY thing THAT forgotten CSS.

  miyeager, I'm sorry, I misread your question. Yes, you can. Use ' vertical-align: top of the text.

• Vertical alignment off the coast in the columns of the table

  I have a table with 3 columns with a line above and below
  To align the text in the column left and right to the top, but in the Central column, the text will not align upwards. It's OK in IE, but in Firefox 1.6 is down by 1 line
  
  How to fix?
  
  David
  
  <! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional / / IN" " http://www.w3c.org/TR/1999/REC-html401-19991224/loose.dtd" >
  < HTML
  xmlns =" http://www.w3.org/1999/xhtml" > < HEAD > < TITLE > BustedComputer < / TITLE > "
  < META http-equiv = Content-Type content = text/html"; charset = iso-8859-1 "/ >"
  < style type = "text/css" >
  <!--
  {body
  do-family: Verdana, Arial, Helvetica, without serif.
  do-size: 11pt;
  Color: #000000;
  left margin: 0px;
  margin-top: 0px;
  
  }
  table, td
  {
  border-color: #000000;
  border-style: solid;
  }
  Table
  {
  border-width: 0 1px 0 1px;
  border-spacing: 0;
  border-collapse: collapse;
  }
  TD
  {
  margin: 0;
  padding: 10px;
  border-width: 1px 1px 0 0;
  vertical-align: top;
  }
  a: link {color: blue; text-decoration: none}
  a: active {color: blue; text-decoration: none}
  a: visited {color: #0000FF; text-decoration: none}
  a: hover {color: blue; background-color: #FFFF9D; text-decoration: underline}
  
  ->
  < / style >
  < / HEAD >
  < BODY >
  < TABLE cellSpacing = 0 cellPadding = 0 width = 800 align = center border = 0 >
  < TBODY >
  < b >
  < TD colSpan = 3 bgcolor = "#6699FF" > Top < table >
  < /TR >
  < b >
  < TD width = "150" bgcolor = "#6699FF" > < a href = "#" > leftside < /a > < table >
  < TD bgcolor = "#FFFFCC" > < p > contrary to popular belief, Lorem Ipsum is not simply
  random text. It has roots in a piece of classical Latin literature
  45 BC, making it over 2000 years. < br >
  < br >
  Lorem Ipsum comes from sections 1.10.32 and 1.10.33 of "of Finibus.
  Bonorum and Malorum"(The extremes of good and evil) by Cicero, written
  in 45 BC. This book is a treatise on the theory of ethics, very popular
  during the Renaissance. The first line of Lorem Ipsum, "Lorem ipsum dolor".
  sit amet... ", comes from a line in section 1.10.32. < /p >
  < Table >
  < TD width = "150" bgcolor = "#FFFFCC" > < table > right
  < /TR >
  < b >
  < TD colSpan = 3 bgcolor = "#6699FF" > bottom < table >
  < /TR > < / TBODY > < / TABLE > < BODY / > < / HTML >
  

  If you see the top margin on the

  Tag?
  

  DOH! DOH! DOH!

  Thanks, removing it solved :)

  David... DOH!

• Problem: The Page with the title bar, Vertical alignment Center does not work BB 10 keyboard (720 x 720)

  Hello

  I want centered vertically align something (for example, a label) on a page with the qml following, but it is not aligned properly on the keyboard BB (720 x 720), it aligns on the contrary always on top. It aligns not centered vertically as expected on BB 10 all touch (1280 x 768).

  import bb.cascades 1.0
  
  Page {
      titleBar: TitleBar {
          title: "Title"
      }
      Container {
          layout: DockLayout {
          }
          background: Color.create("#444444")
          verticalAlignment: VerticalAlignment.Fill
          Label {
              text: "label"
              verticalAlignment: VerticalAlignment.Center
          }
      }
  }
  

  I realize also realize that if I remove the title bar, and then it snaps as I want. Anyone have a solution this? Thank you.

  Try with this:

      titleBar: TitleBar {
          title: "Title"
          scrollBehavior: TitleBarScrollBehavior.Sticky
      }
  

• Table alignment problem

  I have a table of format of CLIENT access licenses that I can't get alignment to work properly.  I have the attributes of the table defined and managed in the R/W rules file (shown below).  I have the code in the EDD to watch the TGROUP label align attribute and apply an initial table format suitable for the attribute (also shown below).  There are 3 conditions of test for the left/Center and right attribute values, then another on the off chance that the attribute is not specified.  The system always selects the condition ELSE regardless of the value of the align attribute.  I tried different case on the value of the attribute, and I tried different quotes on in ESD around the value of the attribute.  Nothing works.  It seems that it should be simple.  No idea what I am doing wrong?

  Thanks for any help...

  Jim

  RULES OF R/W

  / * Rule Container table * /.
  {"table" element
  is part of fm;

  / * Table of the subrules * /.
  the 'ttabstyle' attribute is fm properties table format;
  attribute 'frame '.
  {
  to pronounce fm table property border;
  the 'ALL' value is property of the fm in value;
  the 'TOPBOT' value is fm upper and lower value property;
  'TOP' value is property value top fm;
  'BOTTOM' value is fm property value background;
  value 'COAST' is fm property value ratings;
  the 'NONE' value is fm property set to none.
  }
  attribute "colsep" is fm property column judgment;
  'rowsep' attribute is fm row property judgment;
  attribute 'East' is the attribute of fm;
  attribute 'pgwide' is the wide fm property page;
  }

  / * Rules table Group, array element is container object * /.
  {"tgroup" element
  is fm of table element;

  / * Rules for attribute * /.
  attribute "collar" is fm property columns;
  attribute "colsep" is fm property column judgment;
  'rowsep' attribute is fm row property judgment;
  "align" attribute is the attribute of fm;
  "charoff" attribute is the attribute of fm;
  "tank" attribute is the attribute of fm;
  }

  / * ColSpec treatment * /.
  {"colspec" element
  is fm colspec;
  attribute 'colnum' is the column number of property fm;
  attribute 'column name' is the name of the property column fm;
  "align" attribute is the type of fm property cell alignment;
  the attribute "charoff" is the alignment of the cell of the property compensation fm;
  attribute 'tank' is fm cell alignment character property.
  attribute 'colwidth' is the width of column fm property;
  attribute "colsep" is fm property column judgment;
  'rowsep' attribute is fm row property judgment;
  }

  / * SpanSpec treatment * /.
  {'spanspec"element
  is fm spanspec;
  attribute 'spanname' is fm property name span.
  attribute 'namest' is fm start column name property;
  "nameend" attribute is the name of the end property of fm column;
  "align" attribute is the type of fm property cell alignment;
  the attribute "charoff" is the alignment of the cell of the property compensation fm;
  attribute 'tank' is fm cell alignment character property.
  attribute "colsep" is fm property column judgment;
  'rowsep' attribute is fm row property judgment;
  }

  / * Table of rules of the head * /.
  element 'thead' {}
  is the fm table header element;
  'valign' attribute is the attribute of fm;
  }

  / * Rules of table footer * /.
  element 'tfoot' {}
  is the element of fm table leg;
  'valign' attribute is the attribute of fm;
  }

  / * Table of the rules of the body * /.
  element 'tbody' {}
  is the fm table body element;
  'valign' attribute is the attribute of fm;
  }

  / * Rank rules * /.
  {'line' element
  is the fm table row element;
  'valign' attribute is the attribute of fm;
  'rowsep' attribute is fm row property judgment;
  }

  / * Entry rules * /.
  {"section" element
  is fm table cell element.
  attribute 'column name' is the name of the property column fm;
  attribute 'namest' is fm start column name property;
  "nameend" attribute is the name of the end property of fm column;
  attribute 'spanname' is fm property name span.
  attribute "morerows" is property of fm more lines;
  attribute "colsep" is fm property column judgment;
  'rowsep' attribute is fm row property judgment;
  "rotation" attribute is the property of fm turn;
  'valign' attribute is the attribute of fm;
  "align" attribute is the attribute of fm;
  "charoff" attribute is the attribute of fm;
  "tank" attribute is the attribute of fm;
  / * "align" attribute is the alignment fm property type cell;
  the attribute "charoff" is the alignment of the cell of the property compensation fm;
  attribute 'tank' is fm cell alignment character property. * /
  }

  Tgroup ESD definition

  Element (table): tgroup
  General rule: thead?, tbody, tfoot?
  List of attributes
  Name: align the optional choices
  Choice: left | good | Center | justify | char
  Name: charoff Optional String
  Default: 50
  Name: char String
  Original table format
  If the context is: [align = "left"]
  Table format: Table w / left in power
  Otherwise, if the context is: [align = 'center']
  Table format: Table w/o decision Center
  Otherwise, if the context is: [align = 'right']
  Table format: Table w / right of decision
  On the other
  Table format: Table w/decision Ctr

  Table tag:

  < framework table = 'NONE' colsep = "1" rowsep = "0" >
  < tgroup cols = '2' colsep = "1" rowsep = "0" align = 'left' charoff = "50" char = "" >
  < colspec colnum = colname '1' = '1' colwidth = in "2,000" / >
  < colspec colnum = colname '2' = '2' colwidth = in "2,000" / >
  < tbody valign = "top" >
  < line rowsep = "1" >
  < input column name = '1' colsep = "0" rowsep = "0" valign = "top" morerows = '0' turn '0' = >
  MD80 < para > < / para >
  < / Entry >
  < input column name = "2" rowsep = "0" valign = "top" morerows = '0' turn '0' = >
  918/292-3080 < para > < / para >
  < / Entry >
  < / row >
  < line rowsep = "1" >
  < input column name = '1' colsep = "0" rowsep = "0" valign = "top" morerows = '0' turn '0' = >
  < para >
  < revst / > 737 < resells / >
  < / para >
  < / Entry >
  < input column name = "2" rowsep = "0" valign = "top" morerows = '0' turn '0' = >
  918/292-3737 < para > / 3757 < / para >
  < / Entry >
  < / row >
  < line rowsep = "1" >
  < input column name = '1' colsep = "0" rowsep = "0" valign = "top" morerows = '0' turn '0' = >
  < para >
  < revst / > A300 < resells / >
  < / para >
  < / Entry >
  < input column name = "2" rowsep = "0" valign = "top" morerows = '0' turn '0' = >
  918/292-3300 < para > < / para >
  < / Entry >
  < / row >
  < line rowsep = "0" >
  < input column name = '1' colsep = "0" valign = "top" morerows = '0' turn '0' = >
  < para >
  < revst / > 767/777 < resells / >
  < / para >
  < / Entry >
  < input column name = "2" valign = "top" morerows = '0' turn '0' = >
  817/224-0767 < para > / 0777 < / para >
  < / Entry >
  < / row >
  < / tbody >
  < / tgroup >
  < /table >

  Jim,

  jim_monaco wrote:

  It's a bit tedious because you have to close the file and reopen it to see the effect of the changing attribute, but I can live with that.

  What file do you need to close and reopen? You use another application to apply the XSLT? You can create a structured FrameMaker application and specify the location of XSLT in the structured application. When you open the XML of the chassis, chassis will apply the XSLT transformation and then open the file as an image file. The tgroupstyle attribute will be visible in the display of the structure if it is defined in the EDD.

  Van

• Manual table view - Vertical Align Textarea top and text fields

  I have a manual tabular presentation with insert, update, delete.
  
  The form has a check box, text fields followed by a textarea and followed by 2 other text fields.
  The text box has 4 lines x 25 characters.
  The checkbox and textfield are centered vertically in their cells.
  
  I want that all fields must be aligned at the top, in order to align the upper edge all fields. I don't want the check box and text fields to centered.
  
  I tried setting the 'atrtibutes factor' of the text fields to
  
  style = "" vertical-align: top; ""
  
  but it did not work.
  
  Please help.
  
  I put the application on the APEX. ORACLE.COM
  
  Workspace: RGWORK
  Username: TESTER
  Password; Temp123
  Application: OCA debugging (19173)
  
  Run the 46 Affiliations Page
  
  
  Robert
  http://apexjscss.blogger.com

  Hello

  Try header HTML of the page

  BR, Jari

• Region alignment problems

  4.2.1

  THM: 2

  Hello world

  I had a question about the "new column" option when setting up of regions horizontally. I created an example here

  1. I am not able to reproduce here, but report 1 and 2 If the application has data with higher values, jumping around, I don't know how to respond, but basically, I tried to fix the width of the two reports as they do not horizontally expand depending on the length of column report. Is this possible?  I tried the following in the attributes of the region - style = ' width: 600px; float: center; Clear: none; "While this works, hardcode the origin of the problem in the second point.

  2. I want to center align the region 15 of html.  However, one thing I noticed is that if I set the width of the report 1 and 2 report of a coded hard and then region html 15 value behaves differently in different resolutions, on 1440, it is centered properly with all the elements in this center aligned, however, on a monitor resolution 1600 or 1910, it is pushed to the right side. When I hit the option to see the grid. I noticed there is another grid or column that is created on a higher resolution screen between report 1 and html region 15. This does not happen on a 1400 resolution screen. So the question is perhaps hardcode.

  Basic idea is to have all the three regions of fixed width such that they expand 'horizontal' and html region 15 is centered with everything centered.

  Thank you!

  ryansun wrote:

  I think that the best cases like you said that the two reports extend horizontally based on the resolution of the screen.

  Yes, I thought that was the easiest approach, and I set up in a new page in your demo application.

  I started by simplifying what was to get rid of everything that touched the spacing or available other than the layout region table. It was to drop or modify models of the region which introduce spacing through CSS margins, borders, or padding.

  Then, I created a region containing relatives and made the report and the regions sub-regions of the present button. All models of the region in theme 2 have CSS padding applied, so to avoid this problem, I added a model of area small to use for the container area (Model No. cannot be used because we need a selectable container for use as the target of CSS.)

  After that, it is simply to use CSS to develop the container and its content to the width full page and align the Center area, horizontally and vertically:

  /*
    All of the tab navigation enabled page templates in this theme include sidebars.
    These are not required here, so suppress them to eliminate unwanted padding
    artifacts from the layout.
  */
  td.tbl-sidebar {
    display: none;
  }
  /*
    Set the width of the parent region...
  */
  #container {
    width: 100%;
  }
  /*
    ...and its region layout to the width of the page, and eliminate table cell spacing
    from the region layout table.
  */
  #container .regionlayout {
    width: 100%;
    border-collapse: collapse;
  }
  /*
    Eliminate table cell padding from the region layout table.
  */
  #container .regionlayout>tbody>tr>td {
    padding: 0;
  }
  /*
    Set the width of the report cells on each side to 45% of the page width.
  */
  #container .regionlayout>tbody>tr>td:first-child,
  #container .regionlayout>tbody>tr>td:last-child  {
    width: 45%;
  }
  /*
    Set the width of the center button region to 10% of the page width.
  */
  #container .regionlayout>tbody>tr>td:nth-child(2)  {
    width: 10%;
  }
  /*
    Horizontally and vertically center the button region within the region layout cell.
  */
  #container .regionlayout>tbody>tr>td:nth-child(2)>table  {
    margin: 0 auto;
    vertical-align: middle;
  }
  /*
    Expand the width of the reports to the width of their container cells.
  */
  #container .regionlayout div[id$="_catch"]>table,
  #container .regionlayout .report-standard {
    width: 100%;
  }
  .report-standard td {
    vertical-align: top;
  }
  

  A number of things may need further work. As the parts of the report are now configured No. Template, no titles are displayed. If the securities are necessary, the best way to display will probably use another custom area template to avoid the fill applied to built-in ones. The white background and content minimum paging at the end of the relationship line affects the Visual Center in the vertical axis, causing the position of the region of middle button seem to be too low. This can be solved by removing the paging if reports don't require it, or style of the paging line to have the same background color as the rest of the report.

• Can someone Vertical align this (and perhaps fix the blocking)?

  Here's my problem:

  For the life of me I can not set the 'Add to Cart' button from Paypal.  I want it in the middle.  In Firefox, it looks perfect (well, almost perfect), but in IE it is not in the middle.  I tried to add ' vertical align: middle "in every possible position and adjust the padding and margin everywhere too... nothing works.  (Not to mention, it seems, slightly to the left as well horizontally, but I can live with that).  In addition, blocking worked perfect in Firefox and IE until I added the "add to cart".  Now, the 'blocking' is not quite right in Internet Explorer.  I would like to only it where when someone scrolls anywhere in the cell, the region becomes a darker gray.  I had this problem with the line-height of 250% until the "add to cart" button came and which becomes in Internet Explorer.  Now, I can increase this, but then the menu bar just keep getting bigger and bigger until it seems too big/too high.

  Can anyone help?

  Thank you very much.

  Here is the code:

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
  " < html xmlns =" http://www.w3.org/1999/xhtml ">
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
  < title > Untitled Document < /title >

  
  < style type = "text/css" >

  {.horizontalmenubar}
  make-weight: bolder;
  text-align: center;
  border: 2px solid #000;
  
  }

  .horizontalmenubar td {}
  border-right: 2px solid #000;
  text-decoration: underline;
  background-color: #E5E5E5;
  color: #CA0000;
  line-height: 250%;
  }

  .horizontalmenubar a {}
  color: #CA0000;
  display: block;
  }

  .horizontalmenubar a: hover {}
  color: #CA0000;
  background-color: #B3B3B3
  }

  
  < / style >
  < / head >

  < body >

  
  < table width = "100%" border = "0" cellspacing = "0" cellpadding = "0" class = "horizontalmenubar" >
  < b >
  "< td width ="20% "> < a href ="... / index.html "> home < /a > < table >"
  "< td width ="20% "> < a href ="... / prod.html "> Products < /a > < table >"
  "< td width ="20% "> < a href ="... / faqs.html "> FAQS < /a > < table >"
  "< td width ="20% "> < a href ="... / contact_us.html "> contact us < /a > < /a > < table >"
  " < td width ="20% "> < target form = 'paypal' action = ' https://www.PayPal.com/cgi-bin/webscr "method ="post"> "
  < input type = "hidden" name = "cmd" value = "xxx" >
  < input type = "hidden" name = "hosted_button_id" value = "xxx" >
  " < input type ="image"src =" https://www.PayPal.com/en_US/i/BTN/btn_cart_SM.gif "border ="0"name ="submit"alt ="PayPal - the safer, easier way to pay online how!"> "
  < img alt = "" border = "0" src =" " https://www.PayPal.com/en_US/i/SCR/pixel.gif "width ="1"height ="1"> "
  < / make >

  < / make >

  < table >
  < /tr >
  < /table >

  
  < / body >
  < / html >

  The best idea is to post the page code in its entirety, or post a link to the live Webcam page - exactly to avoid such things.

  In any case, change this-

  method https://www.paypal.com/cgi-bin/webscr"="post">

  on this subject.

  method https://www.paypal.com/cgi-bin/webscr"="post"style =" "margin-top: 0;" > "