Region alignment problems

4.2.1

THM: 2

Hello world

I had a question about the "new column" option when setting up of regions horizontally. I created an example here

1. I am not able to reproduce here, but report 1 and 2 If the application has data with higher values, jumping around, I don't know how to respond, but basically, I tried to fix the width of the two reports as they do not horizontally expand depending on the length of column report. Is this possible? I tried the following in the attributes of the region - style = ' width: 600px; float: center; Clear: none; "While this works, hardcode the origin of the problem in the second point.

2. I want to center align the region 15 of html. However, one thing I noticed is that if I set the width of the report 1 and 2 report of a coded hard and then region html 15 value behaves differently in different resolutions, on 1440, it is centered properly with all the elements in this center aligned, however, on a monitor resolution 1600 or 1910, it is pushed to the right side. When I hit the option to see the grid. I noticed there is another grid or column that is created on a higher resolution screen between report 1 and html region 15. This does not happen on a 1400 resolution screen. So the question is perhaps hardcode.

Basic idea is to have all the three regions of fixed width such that they expand 'horizontal' and html region 15 is centered with everything centered.

Thank you!

ryansun wrote:

I think that the best cases like you said that the two reports extend horizontally based on the resolution of the screen.

Yes, I thought that was the easiest approach, and I set up in a new page in your demo application.

I started by simplifying what was to get rid of everything that touched the spacing or available other than the layout region table. It was to drop or modify models of the region which introduce spacing through CSS margins, borders, or padding.

Then, I created a region containing relatives and made the report and the regions sub-regions of the present button. All models of the region in theme 2 have CSS padding applied, so to avoid this problem, I added a model of area small to use for the container area (Model No. cannot be used because we need a selectable container for use as the target of CSS.)

After that, it is simply to use CSS to develop the container and its content to the width full page and align the Center area, horizontally and vertically:

/*
  All of the tab navigation enabled page templates in this theme include sidebars.
  These are not required here, so suppress them to eliminate unwanted padding
  artifacts from the layout.
*/
td.tbl-sidebar {
  display: none;
}
/*
  Set the width of the parent region...
*/
#container {
  width: 100%;
}
/*
  ...and its region layout to the width of the page, and eliminate table cell spacing
  from the region layout table.
*/
#container .regionlayout {
  width: 100%;
  border-collapse: collapse;
}
/*
  Eliminate table cell padding from the region layout table.
*/
#container .regionlayout>tbody>tr>td {
  padding: 0;
}
/*
  Set the width of the report cells on each side to 45% of the page width.
*/
#container .regionlayout>tbody>tr>td:first-child,
#container .regionlayout>tbody>tr>td:last-child  {
  width: 45%;
}
/*
  Set the width of the center button region to 10% of the page width.
*/
#container .regionlayout>tbody>tr>td:nth-child(2)  {
  width: 10%;
}
/*
  Horizontally and vertically center the button region within the region layout cell.
*/
#container .regionlayout>tbody>tr>td:nth-child(2)>table  {
  margin: 0 auto;
  vertical-align: middle;
}
/*
  Expand the width of the reports to the width of their container cells.
*/
#container .regionlayout div[id$="_catch"]>table,
#container .regionlayout .report-standard {
  width: 100%;
}
.report-standard td {
  vertical-align: top;
}

A number of things may need further work. As the parts of the report are now configured No. Template, no titles are displayed. If the securities are necessary, the best way to display will probably use another custom area template to avoid the fill applied to built-in ones. The white background and content minimum paging at the end of the relationship line affects the Visual Center in the vertical axis, causing the position of the region of middle button seem to be too low. This can be solved by removing the paging if reports don't require it, or style of the paging line to have the same background color as the rest of the report.

Tags: Database

Similar Questions

alignment problem

Hi, I have an alignment problem with my program. I use two verticalfieldmanager in a horizontalfieldmanager to display two columns. The problem is, according to the Simulator tha I use, the text seems aligned or not. In 9000, there is no problem, because the width of the screen is great. But if I use the 8110, which has a narrower screen, this problem occurs. How can I solve this problem for all simulators? Thank you. My code:

SerializableAttribute public class DetallesOfertaScreen extends form {}

GestNearController controller;
Horizontal CustomHorizontalManager;
VerticalFieldManager campos;
VerticalFieldManager labels;
RoundRectVerticalManager contGlobal;
RoundRectContainer contProyecto;



public DetallesOfertaScreen (GestNearController controller) {}

This.Controller = controller;

Cabecera
setTitle ("Datos cabecera");

If (Controller.getOfertaActual ()! = null) {}

Campos = new VerticalFieldManager();
labels = new VerticalFieldManager();
horizontal = new CustomHorizontalManager();
contGlobal = new RoundRectVerticalManager();
contProyecto = new RoundRectContainer();

TAM int = Controller.gettamanoscreen ();
Fuente1 of police;
Fuente2 of police;

If {(tam > 320)
fuente1 = Util.getNewFont (21, Font.BOLD);
fuente2 = Util.getNewFont (21, Font.PLAIN);
labels.setFont (fuente1);
campos.setFont (fuente2);
}
ElseIf (tam<>
fuente1 = Util.getNewFont (15, Font.BOLD);
fuente2 = Util.getNewFont (15, Font.PLAIN);
labels.setFont (fuente1);
campos.setFont (fuente2);
}
else {}
fuente1 = Util.getNewFont (19, Font.BOLD);
fuente2 = Util.getNewFont (19, Font.PLAIN);
labels.setFont (fuente1);
campos.setFont (fuente2);
}

LabelField labelArea = new LabelField("Área:");
LabelField labelLinea = new LabelField("Línea:");
LabelField labelVO = new LabelField("VO:");
LabelField labelTitulo = new LabelField("Título:");
LabelField labelCliente = new LabelField("Cliente:");
LabelField labelFechaOfer = new LabelField ("date offer :");
LabelField labelFechaCom = new LabelField ("date beginning :");
LabelField labelFechaPrev = new LabelField ("date Aprobacion :");
LabelField labelJProy = new LabelField ("Jefe proyecto :"); ")
LabelField labelMeses = new LabelField("Meses:");
LabelField labelProbabilidad = new LabelField("Probabilidad:");
LabelField labelHorasPrev = new LabelField ("Horas Previstas :");
LabelField labelRevision = new LabelField("Revisión:");
LabelField labelSector = new LabelField("Sector:");

Offer OfertaDTO = controller.getOfertaActual ();

String FechaCom = oferta.getFechaComienzo ();
String months = oferta.getMesesNum ();
String HorasPrev = oferta.getHorasPrev ();
String revision = oferta.getRevision ();
VO string = oferta.getVO ();
String date = oferta.getFechaCreacion ();
String title = oferta.getTitulo ();
String client = oferta.getCliente ();
Sector of strings = oferta.getSector ();
String line = oferta.getLinea ();
String domain = oferta.getArea ();
String JefeProyecto = oferta.getJefeProyecto ();
String FPrevAprob = oferta.getFechaPrevAprob ();
String probability = oferta.getProbabilidad ();

LabelField input1 = new LabelField (Area);
LabelField to input2 = new LabelField (Linea);
Input3 LabelField = new LabelField (VO);
Input4 LabelField = new LabelField (title);
LabelField input5 = new LabelField (client);
LabelField input6 = new LabelField (FechaCom);
LabelField input7 = new LabelField (FPrevAprob);
LabelField input8 = new LabelField (date);
LabelField input9 = new LabelField (JefeProyecto);
LabelField input10 = new LabelField (months);
LabelField input11 = new LabelField (probability);
LabelField input12 = new LabelField (HorasPrev);
LabelField input13 = new LabelField (Revision);
LabelField input14 = new LabelField (Sector);

Añadimos a los contenedores
labels. Add (labelArea);
labels. Add (labelLinea);
labels. Add (labelVO);
labels. Add (labelTitulo);
labels. Add (labelCliente);
Para activar el scroll
labels. Add (new NullField());
labels. Add (labelFechaOfer);
labels. Add (labelFechaCom);
labels. Add (labelFechaPrev);
labels. Add (labelJProy);
labels. Add (labelMeses);
labels. Add (labelProbabilidad);
labels. Add (labelHorasPrev);
labels. Add (labelRevision);
labels. Add (labelSector);

Campos.Add (INPUT1);
Campos.Add (INPUT2);
Campos.Add (INPUT3);
Campos.Add (INPUT4);
Campos.Add (input5);
Campos.Add (input8);
Campos.Add (input6);
Campos.Add (input7);
Campos.Add (INPUT9);
Campos.Add (input10);
Campos.Add (input11);
Campos.Add (input12);
Campos.Add (input13);
Campos.Add (input14);


horizontal. Add-on (labels);
horizontal. Add (Campos);

contProyecto.add (horizontal);
contGlobal.add (contProyecto);
Add (contGlobal);

}
else {}
Dialog.Alert ("invalid offer!");
}

}

...

With 8110:

Thank you!!

Weird alignment problem

I think it might have something to do with my work on a small document - 48 * 48 icon - but maybe not.
I have some strange alignment problems. I have an arrow head, I try to line up on a tree, and no matter what I do, they refuse to align the death. The alignment buttons don't work, dragging manually won't work - it falls right on 1px on each side where I want.
Any ideas what's happening? I have no guides that would have an impact on it.

Make sure you have not align on the pixel grid is activated in the transformation Panel.

Although, if you prepare the content that will eventually be pixel based, leave this setting on ensures things seem to be crunchy in pixels.

Cartridge alignment problem Officejet 6110xi

Installed the new cartridge. Printer wants to align. Get the message 'paper too narrow. " Using same paper I used forever. Help, please.

Hi DenBon,

I see that you have a problem with an error "the paper is too narrow" on the printer.

Please make sure you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

I have also found a document that deals with one "Paper Mismatch", or "Paper Size Mismatch" Error Message displays when printing.

If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

Thanks for your time.

SCORM alignment problem

I tried to force a Captivate 3 flash file to run in the upper left corner of the browser window.
For those who had a go at my previous question...
Aligning Captivate 3 Flash files in the browser
I still have no solution, but I discovered today that if I generate a SCORM rather than the same content Captivate version, I don't have the problem of alignment.
This is the file runs only Center screen if I generate a SCORM version.
Any other suggestions?
I'm starting to think that it is a SCORM related bug in Captivate 3?
Thank you

Hello

Try adding the following code somewhere in your region of the head of the HTML page:
See you soon... Rick

Useful and practical links

Captivate wish form/Bug report form

Certified Adobe Captivate training

SorcerStone blog

Captivate eBooks

Inkjet e: 5740 5740 printer does not print color cyan & alignment problem

Hello

Recently, I replaced my lights on my P 5740 printer ink cartridge while trying once photograpgh print [6 x 4] & have had nothing more than headaches since.

The cyan color does not print ink levels indicate that it is used. I cleaned the heads of ink at level 3. I have replaced the ink cartridge & still have the same problem and now the alignment is unsuccessful.

I'm challenged to begin with technology & this challenge is both frustrating and disappointing that I do not understand what I did right.

Any suggestions before I have packing the printer & return to Staples?

Thank you

HI @RC23,

Because the printer is only a couple of months I suggest to HP customer care and ask about a replacement printer. Most likely, it is a matter of ink system, since you've already tried another cartridge with the same results. Check the model number and the form to receive a file number for faster assistance.

Thank you!

Parameters of DVD/CD region change problem

I have a laptop HP with a master CD/DVD Toshiba MK 8025GAS player with the slave TSST Corp CD/DVD TS-L532M
I can't change the region settings, as says I have 1 change left, but when I try to change the region setting 1 to 4 in the region, I get the response "unable to update region setting. Make sure the drive contains a region 4 media and you have administrator privileges.
Can you please advise me what can I do about it? Thank you.

At first, I must say that the notebook manufacturer is responsible for all of your problems laptop and no manufacturer for each component material.
I have Toshiba laptop and inside is Samsung HDD. If I have problems with it I n t Samsung but Toshiba contact.
You know what I mean?

Back to your question: do you have (your account) of administrator privileges?

HP D4360 printer - alignment problem?

My watch of the half cut letters (upper half), Headline is not yet printed on the page, a clear text than the rest of the text,

white line crosses SOME of the lines of text, page #s top (right) not printed.

Note: I have a new cartridge it works fine.

Note: I had a paper jam the other day, out of paper on the other side (did not know that I should open a backdoor to do). But, I

think I got an OK impression after that happened. Today, printing problems. Help please!

It's sunshyn2005 - thank you for your information. In fact, it is not a matter of color. It was really the alignment. I received instruction from someone on the spot - to go to start/printers-devices/preferences/services/then click the ALIGNMENT tab, which produced a sheet printed diagnostic, I then completed in the screen. Had to re - align 3 times to get it perfect, but it worked.

Thanks for your suggestion, the page that came on the colors and other things I have bookmark for playback if/when other problems arise.

Thanks for your comments.

TriciaJoy

Boolean text alignment problem

Hello

I use "propertyosition:Left" to line up my file names. Unfortunately, file names do not align vertically to the first "Choose file" button, especially when the length of the file names is different. If you press "Esc" in the menu "Select a file" and then "select a file" is pressed in the 'main Menu', file names are aligned now. I don't know why? Any help will be appreciated.

First, run 'Main Menu' then 'Create a file' and then ' Select a File. " Please create files in the folder "C:\Test". Six files can be displayed.

Steve

John wrote:

Hello

Have you tried to delete a single file and add another file with different length of the file name? I'm sorry, what is your way on 'text version' on the properties?

Thank you

Steve

Your problem is that you have locked the text and the default justification is out in all your buttons. Correction is attached.

(Just try this in "Select a File_Test.vi"):

1. make all your buttons visible

2. "text version" (as someone said - just right-click on the text and select "Text Version" - this to all buttons)

3. Select all text, and set the left justification

4. make all the invisible buttons

It's everything he needed...

-DP

Alignment problem Date 6i Oracle report in Arabic Windows 7 (Professional)

Hello

6i Oracle form and report work very well under windows 7, but we are facing problems with Arabic alignment (Date of the Hijra). like his appear 21/11/1431 and we would like to show 21/11/1431.

Report 6i, we can change the format, but we have hundreds of reports. and same report another excellent work up to version 5.3

Pleae help

Thank you

Contact the Oracle Support for assistance. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Alignment problem page & ink cartridge

I have a HP Officejet Pro 8000 Wireless printer. Recently I have had several problems with it - from flashing lights saying there is a paper jam, but nothing was ever found. That seemed to fix and now I have problems with the printer will print an alignment page after EACH print job. I have cleaned the print heads, installed new cartridges, print diagnostic pages, etc. The only "issue" on the reports seems to say that the health of the printhead to the status of magenta/cyan is monitor vs a good status on the yellow/black. After that I cleaned the printheads (for the second time) I went through the steps intermediate and advanced also. After the intermediary seems to show the magenta printing, but after the Advanced setting, she showed no magenta. I tried to verify that there is no break in the tubes... Has anyone else had this / these problems and how to correct you? Thanks for any help!

I am betting that it could be a problem with the Magenta/Cyan Printhead. Follow the steps outlined in the document below to try a clear problem. You can ignore the Solution 2, since it's just cleaning and which does not appear to have contributed. If the steps in the document do not resolve the problem, replace the printhead of problem.

Alignment printed before each print job page

IP 7220 alignment problem

I'm running with windows and an ip7220 printer. This printer was sent, by cannon, 2 years ago (part of which is quoted below - last paragraph), as a replacement for another printer Canon (ip4920) that had gone wrong. This printer don't work never really at the height but, now its going to be replaced. The problem is quite simple. When you print the thing checkprinthead the top black vertical lines are not strong but are two teeny black lines. This effects all feel so photo eventually stained.

I took the print head and cleaned nothing doesn't. I cleaned it by washing it and then put it in a bath ultrasonic until the cleaner media (hot water) ran clear. This is usually the case but, in this case, it made absolutely no difference and nothing has changed. I ran all programs maintenance several times without success. This thing will be all simply do not align properly and the black parts of the alignment process are all stained and never reach any type of solution regardless of the parameters bar none.
```
(Mod Note: serial number removed as directed by forum), has been shipped via UPS. This is a replacement for your Canon  (Mod Note: serial number deleted according to the forum).
```
Thoughts?

I did everything I could, but just simply omitted. I bought another printer that continue. Thanks for the reply!

Photosmart 7510 alignment problem

Hello

I'm having a problem with my photosmart 7510.

The screen an error alignment and the alignment and cleaning do not work.

Is there something else to do? or should I buy a new printer?

Thank you

I called HP support 1-800-474-6836 and spent a few hours with their support to the execution of diagnostic tests.

They recommended a replacement of the printer because basic troubleshooting has not helped.

We power off of the pritner (power disconnected) and held the power button for 30 seconds.

power turned back and removed printer cartridges and printerhead. Clean any electronic contact with a cloth and put back them.

Also replace photo cartridge that was less than 30%.

The alignment is still not.

HP Color LaserJet CP1518ni - color alignment problem

I'm having a problem with the alignment of different colors with my HP CP1518ni printer. Essentially colors don't print really in the same place, as the impression of Red (Magenta) is never aligned with black / yellow / Blue (Cyan) (so I can have the text in red with a black text shadow 0.5 to 1 mm below or blue with a red shadow of 0.5 to 1 mm at the top for example).

Troubleshooting always just irritates me to calibrate, but I have many, many times over many months, calibrated and it does not help.

Does anyone know of other solutions? Or should I buy a new Magenta cartridge and see what happens?

My cartridges are:

Magenta - CB543a

Cyan - CB541a

Yellow - CB542a

Black - CB540a

Make sure that you update to the latest Firmware. HP recently released a newer version which helped with a more concise calibration with the alignment of color plan. Many people have reported these problems solved after running the update.

Update XP (English) can be found here:

http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=3422472#N841

Paper alignment problem 710e HP Officejet 6500 has

Having a problem where the printer is to cut the top 1/8 "out of all the copies and printed pages. Does anyone have a solution for this problem?

You could try to do a print head alignment, but I don't know if that will fix it. You can find it by going to the printer settings. Then, look under Tools, and you should see align the print heads. In case this doesn't work, I'll send you a few steps to try via private message. Let me know what happens.

Region alignment problems

Similar Questions

Aligning Captivate 3 Flash files in the browser

Maybe you are looking for