Vertical alignment problems HP Photosmart D110a on A5 paper

Similar Questions

• vertical alignment problem table

  Hello
  I wonder if someone can take a look at this page www.fitnessworld.ca/corplist.html and tell me what needs to be fixed to make the first column at the beginning of words at the top, aligned with the column next to it.
  If you have a solution, could you give the code in the right place?
  Thank you
  Text

  Vertical alignment is set to "default". This means that the text will start in the middle and work from top to bottom. If there is more text in columns one than the other, this is the result. Set the alignment of verticle at the Top for both and you are ready. You can do it in the property inspector.

  Andy

• Vertical alignment problem

  Hello.

  I'm really dense or something wrong with the way of working alignments.

  I took the basic HelloWorld application and tried to simply align the text:

  Page {
      Container {
          horizontalAlignment: HorizontalAlignment.Fill
          verticalAlignment: VerticalAlignment.Fill
          Label {
              horizontalAlignment: HorizontalAlignment.Center
              verticalAlignment: VerticalAlignment.Center
              // Localized text with the dynamic translation and locale updates support
              text: qsTr("Hello World") + Retranslate.onLocaleOrLanguageChanged
              textStyle.base: SystemDefaults.TextStyles.BigText
          }
      }
  }
  

  So as far as I understand it, the container must snuggly fill available about heigth (vertical) and width (horizontal) space.

  If the label should be centered in two dimensions as well. But when I run it, the label only centered horizontally, but not vertically.

  I deceive you somewhere? I didn't I'd be able to get something wrong so fundamentally easy.

  Looking forward to your answers.

  Best regards

  Wildcat

  The default layout for a container is a StackLayout fixing things up and down. You can use the DockLayout to center the text like this:

  Page {
      Container {
          layout: DockLayout {}
          horizontalAlignment: HorizontalAlignment.Fill
          verticalAlignment: VerticalAlignment.Fill
          Label {
              horizontalAlignment: HorizontalAlignment.Center
              verticalAlignment: VerticalAlignment.Center
              // Localized text with the dynamic translation and locale updates support
              text: qsTr("Hello World") + Retranslate.onLocaleOrLanguageChanged
                  textStyle.base: SystemDefaults.TextStyles.BigText
          }
      }
  }
  

• HP photosmart d110a printer load paper message demo lights after power to the top

  After changing the black cartridge, when I turn on the printer, it always comes up with the message "loading paper".  There are in the paper machine.  I removed, repositioned, tried different papers, etc.  I have the choice to see the demo or "OK to continue".  Whatever it is, it then puts to the top of the screen, which suggests that I run the alignment process.  It is the only choice.  When I press OK, it now says 'print alignment page' and displays the blue bar pulse, the Red 'X' and the power button flashes, but it remains that way forever.   Oddly enough, I can still print, even when paused trying to print the alignment page.

  Hey there. Try following the steps described in this paper: a "undetected alignment page" or "Cannot be alignment" Message displays on the all-in-one

  Even if the title is not correct for your mistake, it goes through the same troubleshooting steps. Let me know if this is not the problem. If she does not show returns with a new details and we will continue from there.

  Good luck

  Sean

• HP photosmart D110a: printer says paper but leaves a black mark on paper in the tray

  Laptop got hit out of the office by CAT when you are connected to the printer when printing. Now the printer says there is no paper in the tray and it leaves a black on the paper mark as the printer attempts to shoot the top sheet of paper in, but he can't.

  I fixed that on my own by giving the top sheet a little bit as he began to print. Hope this helps someone.

• Photosmart D110a driver problems

  Hi all

  I have a HP Photosmart D110a. I came across some printing problems (always said it was looking for printer, never found), but I had not being updated or changed something, it just happen out of the blue.

  I deleted my drivers, thinking I could easily find them online. I don't have the CD. I am running OSX Mavericks. My printer says it is connected to my network wireless, but when I try to add the printer in System--> Printers Scanners preferences &--> + it does not detect. There seems to be no download of driver software available on the HP site, that instructions on how to download updates from the update on Macs, which is not good because it is said that there is no available.

  Does anyone have any suggestions? Desperate here.

  Hi thuffman,

  I've worked with a lot of other help get the HP printers installation and in collaboration with the Mavericks. You are right, for the moment there is no full software features and driver for the D110a, but with a doubt be able to add the printer.

  You said when you try to add the printer "it does not detect", I just want to clarify that. The computer does not detect the printer or the computer does not detect the driver?

  As I understand it, I suspect that the computer does not see the printer at all which means that the computer cannot be on the right side of the network. You said that you have confirmed that the printer is on the correct network, have you checked the computer network? If the computer is located on the right of the network may try to turn off the router, the device from Apple and HP printer.

  Follow these steps to turn off the router, Apple and the printer device.

• Photosmart D110a problems accessing print apps? Look here.

  If you have installed your Photosmart D110a wireless printer on your home network and enabled web services using the or before June 16, 2010 print applications, you can encounter difficulties of launching applications print on or after June 16.

  A firmware update has been published which will be offered to customers who have enabled web services, if your D110a offers a FW update, please accept.   If you continue to experience problems using Print Apps after the FW update, follow the steps below to remove and add web services.

  1. Remove web services (configuration > Wireless > Web Services settings > delete Web Services)
  2. Add web services (configuration > Wireless > Web Services settings > enable Web Services).  (If you have not accepted the FW update prior to removal/re-adding web services, you will be offered the FW update when you reactivate web services... accept the update to continue.)
  3. Confirm that the sheet of info web services with your ID printers prints correctly after that you re - enable web services.  If the information document does not print, delete and re - enable web services again.
  4. If you had already created an account on www.hpePrintCenter.com and your printer has been added to your account of ePC, to return to the EPC and add use the new ID of your web services info sheet printer to add the printer back to your account

  Sorry you're still stuck, Andrew.

  Try this:

  If you have enabled web services, remove web services before performing the steps below.

  1. Select the installation program (key)

  2. Select Preferences

  3. scroll down and select Product Updates

  The unit will check the available product updates - if some are available by applying them should solve your problem.  You should then be able to activate the web services and prints the Backgrounder web services.

  Please let us know how it goes.

• Photosmart D110a. Error message: at least one of the cartridges has a problem.

  Photosmart D110a, Windows 7 32-bit, error message: at least one of the cartridges has a problem. Will print black if the deleted color cartridge. New cartridges does not solve the problem. Everything suggests not tried twice, cleaning, disconnect, etc..

  There is a document with the right information on how to help solve this problem located here.

  It seems that you have already made certain steps to help with this. If the printer is under warranty, then you may want to contact the HP Support on this device.

  Let me know if it helps.

• I have a problem with CSS vertical align. Help!

  This could be an easy fix, I don't know... but I've been customized style BC Photo Gallery and lightbox on this site that I'm doing for a photographer and I got a problem with the vertical alignment.

  I created my own .css document to replace styles Viewer by default in British Colombia, and now all I'm left with tries to Center vertically the lightbox image. I googled some methods and tried, but had no luck...

  http://michaellaphotography.BusinessCatalyst.com/Gallery-pages/weddings

  Check out the link, and when you click on any thumbnail, you'll see what I mean.

  I know I can't use filling methods, because I work with pictures in portrait and landscape.

  Thanks for your help!

  The light therapy device you use made for the creation of a larger full size of the image.  As a general rule, if you have a portrait image that is larger that the screen of the user enough scroll a little more.

  If you temporarily remove the CSS for "img #lightbox" on line 20 of myStyles.css you'll see how lightbox works in native mode. This should be good since the user wants to zoom and see a bigger picture when they click on it and it will be as big as possible on their screen.

  Once you see what I mean with the changes, I can tell you how to make sure the portrait images do not expand to full height and beyond the viewport. Rather than delete the CSS "img #lightbox" statement like I said before, this time change for:

  #lightbox img {}

  Width: auto;

  height: 100%;

  }

  This will ensure the images in the light therapy device take 100% of the height of the lightbox container and the width dimensionnera automatically to keep the proportion of the image. Landscape photos will be large and landscape photos will not be larger than the viewport.

• Problem: The Page with the title bar, Vertical alignment Center does not work BB 10 keyboard (720 x 720)

  Hello

  I want centered vertically align something (for example, a label) on a page with the qml following, but it is not aligned properly on the keyboard BB (720 x 720), it aligns on the contrary always on top. It aligns not centered vertically as expected on BB 10 all touch (1280 x 768).

  import bb.cascades 1.0
  
  Page {
      titleBar: TitleBar {
          title: "Title"
      }
      Container {
          layout: DockLayout {
          }
          background: Color.create("#444444")
          verticalAlignment: VerticalAlignment.Fill
          Label {
              text: "label"
              verticalAlignment: VerticalAlignment.Center
          }
      }
  }
  

  I realize also realize that if I remove the title bar, and then it snaps as I want. Anyone have a solution this? Thank you.

  Try with this:

      titleBar: TitleBar {
          title: "Title"
          scrollBehavior: TitleBarScrollBehavior.Sticky
      }
  

• HP Photosmart D110a

  The case is that I lost my software for my HP Photosmart D110a CD, on the other hand, when I try the software downloaded from the internet it says "file not found". Can someone send me their CD sotware or helping me understand how my printer please

  Hello

  To help you with downloadable software... Please let me know the operating system, your computer has so I can you gave the link for the same...

  Concerning
  Aneesh

  ***********
  I represent HP
  You can say thank YOU by clicking on the STAR of CONGRATULATIONS. If my suggestion solves your problem Mark as a 'SOLUTION' in this way, others can benefit thanks in advance!...

• Change page scaling Photosmart D110A

  Printer: Photosmart D110A

  OS: Windows 7

  I have a software which requires me to set 'page scaling' to 'none '.  I searched preferences and properties and cannot determine how to do this.  Can anyone help?  Thank you.

  No problem, glad I could be of help. If you would like you can say 'Thank you' by clicking the star under my user name on one of my posts, and or chose to select this position as the Solution for the thread so that others will know what it is!

  Have a great day and a wonderful weekend!

• Photosmart D110a: installed the new HP black ink cartridge and now the black ink does not print

  Just installed a new print 60xl cartridge to replace the one that was being ink. Now the black ink basically does not print. I cleaned the cartridges 4 times and run all Diagnostics pages. The black prints just a small piece of the upper part of the letters on the pages of diagnostics and in grayscale on the test pages.

  Hello!
  Welcome to the HP Forums, I hope that you are @janmacwill,

  I saw your post on the black ink does not print your Photosmart D110a and I wanted to stop making you share my suggestions. See the link below to solve the problem and if the black still does not print, contact HP (below) to see about a replacement unit.

  Printer prints a blank Page or doesn't print black or color ink for the printer series HP Photosmart e-All-in-One (D110a and D110b)

  If you have trouble, let me know and I'll do my best to help.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up".

  to say thank you for my help.

  Have a wonderful day

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once will open the support page please select the country in which you are

  located. Then enter your model of HP on the right number.

  (2) then choose the 'Contact Support' tab at the top and scroll down to the

  bottom of the page "HP Support - Contact" to fill in the form provided

  your contact information.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select ' Get phone

  number. "A file number and telephone number will now fill for you.

• export photos scans into iphoto. HP Photosmart D110a. Latest version of mac.

  I am a user of MAC OS x-7-5.  Recently updated software HP HP download Photosmart D110a fm all in one.  Download went well past that all functions work using wireless for Mac under roof using Verizon MIFI.

  With the previous software, I could export the digitized photographs directly into Iphoto.  Now, not so much.  Cumbersome to go to a place is and then import them into Iphoto.  Is there a HP or third-party solution that will restore this function?

  Appreciate the help.

  Hi Wanderboy, I was just wondering if you still have the original disc supplied with your printer?  When the software and updated on the web page of HP drivers, some changes could take effect with the over all performance of the software.  If you still have the original disk, I suggest that do you a complete uninstall and then reinstall using the disc that came with the printer and see if that solves your problem.

  If this proves unsuccessful, please write back and I'll be more than happy to provide assistance in this regard more far.

  Thank you

  Waterboy71

• HP photosmart d110a: printing using ipad

  Hello

  I've been printing from my ipad using airport express on my HP Photosmart D110A with no problems (since we do not have a modem at the cottage). Recently, the ipad has asked a password to print. We have never set up a password before since we initially the printer to work by setting up an ad hoc network. The printer is the name of the network SSID and display for the password is "undefined".

  I recently had a software upddate and now, whenever I want to print something, the notice to enter the password rises and does not print because it will not accept a password on the ipad.

  I don't understand why I now need a password when I never needed before, and how to set a password for the ad hoc network so that I can print from my ipad?

  Thanks in advance.

  Hi @JMPLB,

  Thank you for joining the Forums of HP, I can certainly help you to print from your iPad.

  I saw a need for a password with the type of connection you use, so you may need to re-establish the ad hoc connection.

  Simply tap the dashboard bit next to the key on the front panel of the printer, to access the Setup menu, then click on wireless. In the wireless Menu, select wireless settings, then select default network. If the blue wireless turns off, restore wireless settings and choose activate wireless. Once this is done, your printer will be broadcasting the AdHoc network, and you can join the network with your iPad again.

  Please let me know the results of your efforts, and if you need help, I'll gladly do everything I can to help!