The gray vertical lines appear on the bottom screen shots

Hello

Vertucal gray lines appear on the few photos that I took to be painted. They appear not in the Photos, but only when they are displayed as background pictures. It happens on every image but some a few, I can't work on any model! Any help would be appreciated!

Photo for example is attached.

See you soon

You see the same problem, if you export the photo (file > export > export original) and then set the photo as the desktop to a folder in the Finder and not directly from your photo library?

Preview shows also the photo with band objects?

If you can see objects only when display as an image of the desktop, try the same from another user account - sign in the guest user account and set the image of the Office here.

If the guest user account shows the same objects, restart your Mac in safe mode.  What is going on?

See this link: Mac OS x: Safe Mode boot

Tags: Mac OS & System Software

Similar Questions

  • Blue vertical line appear on the screen of the series M Satellite

    I had a blue vertical line appear on my screen its about inch thick and is at - it start, can someone tell me if I can get rid of him? Thank you.

    Hello

    If this blue line is present from the first second after turning on the laptop that I presume it's because of the faulty graphics card. To be sure try to connect an external display to see the same thing will happen. If Yes, it is the evidence that this line occurs due to faulty hardware.

  • Satellite P30 - three vertical lines appeared on the screen

    I have a problem with the display on my p30 110 three vertical lines appeared on the screen, the pc has been scanned with three different antivirus programs and seems to be clean any suggestions would be helpful

    Hello

    These problems usually occur due to a malfunction of the equipment.
    But have you tried to update the graphics driver. If this isn't the case, so I recommend to do.
    The update may solve some problems.

    However, if vertical lines persists then you should ask Toshiba service for assistance.
    He must check the laptop.

  • My normal short clip in the timeline panel. When I hit the break, vertical lines appear. The lines are also exported. Why?

    My normal short clip in the timeline panel. When I hit the break, vertical lines appear. The lines are also exported. Why?

    Found an answer online. Here it is:

    I also want to mention that if you disable your GPU acceleration and use the software only mode the question should stop. It seems to affect only when the GPU acceleration is turned on.

    Go to file > project settings > General and only software switch.

  • My phone has a gray spot and he goes but he always comes back and my phone is bulging commandeLorsque I try to push to vertical lines appear so I can't push

    My phone has a gray spot and he goes but he always comes back and my phone is bulging commandeLorsque I try to push to vertical lines appear so I can't push

    Is that an iPhone 5? If so, you may have a battery of swelling which pushes the screen and that may have caused damage to the screen.

  • OfficeJet Pro 8500 has vertical line from top to bottom after a copy or scanning via adf

    Each copy or scan do using the automatic document feeder to my HP Officejet Pro 8500 a shows a vertical line from top to bottom left of each page. I have cleaned the printer at all parts of the feeder, - nothing dirty in fact found. When I copy or scan the glass plate there is no vertical line on paper.

    Anyone have the same experience with this printer?

    Usually if the scanner works on the dish, but product line in the scans from the ADF, it's because of something on the glass.  Have you tried to shine a flashlight down on the surface of the small approximately 1 in. piece of glass on the left side of the bucket?  This is the strip of glass used for the ADF.

    Like trying to clean the white strip, located on the lid above the glass of the ADF, well clean to make sure there is no debris on the support that can cause this line appears.

    * Make sure that the printer is plugged into a direct socket, rather than a surge protector.  The 8500 has protection against overvoltages integrated in the device and an another surge in the circuit protector can sometimes cause lines.  However, usually this causes lines in both ADF and flatbed scans.

    There is also a document provided by HP with the steps to troubleshoot issues when a line is present in the copies/scans.  The document can be accessed here.

    I hope this helps.

  • Yellow vertical line appears on Satellite Pro

    My machine is 18 months old. Last week a thin yellow vertical line appears on the monitor approximately one third of the left side. Tonight a thin purple line appeared about 1 cm to the right of the yellow.

    Any ideas what causes this and how can I get rid of him?

    Hello

    You you connected the laptop external monitor to check if the lines appear also on an external display? If this is not the case, check it.
    If the lines appear on the second screen, so I suspect it s a malfunction of the motherboard (graphics card).

    In this case, you do not have many ways to solve. For the most part a replacement is necessary.
    According to your message, sure the laptop is 18 months, so usually the guarantee should be valid if you have registered on the page of Toshiba notebook.
    The standard warranty covers the laptop for 12 months and after registration, you have a 24 months warranty coverage.

  • a pink vertical line appeared on my screen

    A thin pink vertical line appeared on my screen. How can I get rid of him. I tried the obvious bases.

    You probably have a line of dead or stuck pixels on your LCD screen. There are programs that carry out the display of this bike through various display models and some people recommend massaging where the pixel stuck watch manually.

    Video exercise programs show some real promise, but I'm not sure a lot of the other supposed fixed. Personally, I think that many of these patches are as a cure for sneezing that they are no longer for the laugh of the person who provided the remedy in the interest of the person in arrears by sneezing. In addition, if the pixel has become unstuck, you can always ask success.

    Use Bing or Google to find dead pixel and you will get a multitude of solutions thrown your way. Exercise video display may be worth trying.

  • HP envy smart-touch j 15: display vertical line appeared in the Middle

    How can I solve vertical line has appeared in the middle and color of windows seems also dimmed

    Dear customer,

    Welcome and thanks for posting your question on the Forum of Support HP

    It seems that you are having problems with your laptop display. We will surely help you with this problem

    1. Please check if the display screen / laptop showing lines even in BIOS or not

    Note: Turn on the computer laptop and typing on the F10 key to access the BIOS

    2. Please tilt the laptop display slowly to the back and the front, check and check

    If the lines are visible to all the corners of the screen

    3 Please connect an external monitor to your laptop and check if the lines appear even on the

    external monitor

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on Thumbs Up white on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    GBL84

    I'm not an employee of HP

  • White vertical line appeared on the screen.

    A vertical white line appeared about 3 inches from the left hand side on my Dell Studio 1749.  It started about 1 mm wide, but increases in width and is now about 4 mm wide.  There is no problem on an external monitor when connected.

    Is this likely to be a problem with the Panel or a chip problem?

    Thank you.

    Yes, probably would have worked, but I just replaced the screen in the end.

    Thank you

    Ian

  • Tecra M2: Vertical lines appeared and cannot go beyond the Toshiba screen

    I was watching a movie on DVD WIN and froze my TECRA M2 I restarted, I noticed blue vertical lines on the windows on the screen, then the loading screen went white, I restarted the pc and it Gauthier go beyond screen black screen of toshiba. Some people told me that it is the other HDD VGA. What do you think?

    Hello

    For me, it certainly looks like the graphics card failure!
    It's really bad, because for the most part to the whole motherboard must be replaced! :(
    But to be 100% sure the diagnostic test is necessary.

    I think you should contact the ASP in your country. Guys to explain the situation and ask for clarification.

    Maybe your warranty is valid? In this case all replacements would be FRO free!
    Usually the guarantee must be valid for 24 months if you have saved this notebook on the Toshiba page.

    concerning

  • WINDOWS XP STARTS TO LOAD. STOPS LOADING AND VERTICAL LINES APPEAR ON THE MONITOR. LAST DAYS ONLY. CAN NOT USE COMPUTER.

    WHEN STARTING MESSAGE BED WINDOWS HAS STOPPED UNEXPECTEDLY. GIVES A LIST OF POSSIBLE CAUSES AND IF APPLICATION WINDOWS TO START NORMALLY. THEN IT STARTS AND LINES APPEAR ON THE SCREEN. HELP PLEASE... ALSO WORKS WITH SP2

    WHEN STARTING MESSAGE BED WINDOWS HAS STOPPED UNEXPECTEDLY. GIVES A LIST OF POSSIBLE CAUSES AND IF APPLICATION WINDOWS TO START NORMALLY. THEN IT STARTS AND LINES APPEAR ON THE SCREEN. HELP PLEASE... ALSO WORKS WITH SP2

    =================================
    Looks like you may have a type of material
    failure, but the following article may be worth a visit:

    (307852) how to start your computer using the
    the last known good Configuration feature
    Windows XP
    http://support.Microsoft.com/kb/307852/en-us

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • vertical line appears on the right side of the monitor

    When I hit the menu button, that nothing comes up that I can't make changes in this way. I know it must be something simple, but if I can't go on the menu screen to show how else can I set the monitor so that the line on the right side goes?

    Hello ufonda,

    When you press the menu button you say lock OSD?

    If Yes
    Press and hold the button of menu during about 10 seconds unlock the menu button

    If no
    Unplug the monitor from the wall and the computer completely. Then reconnect it back and try again the menu button.

  • Gray vertical lines on external monitor

    I have a hp compaq nx6330 (ex856av) using windows xp. last may, the screen is black (I was told I need to replace the lcd screen), so I decided to use a generic external monitor. a few months ago, I had to repair and the repair guy said it will upgrade the operating system to windows 7. things worked fine for about a month then the screen (external monitor, the screen of the laptop is dead) begins to have lines vertical gey (the entire screen). I played with the resolution and I was able to get rid of the lines a couple of times. are the lines related to the use of windows7? This particular model supports any OS in addition to that (windows xp) it came with?

    If a laptop screen and external monitor of office/display also shows the lines is a problem with the hardware with the laptop and the motherboard needs replacement. We cannot solve this problem, because it is not a software issue related and just to tell you it has nothing to do with the operating system

    You can also check your warranty here to check the status of the guarantee

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    Although I am an employee of HP, I speak for myself and not for HP

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    Although I am an employee of HP, I speak for myself and not for HP

  • Junk address bar in the bottom screen

    If I point with the mouse on the blue as links change and change
    the text as:
    https://support.Mozilla.com/NL/questions/new?product=beta
    or
    https://support.Mozilla.com/NL/questions/new?category=B5 & ShowForm = 1 & Product = beta & Search = unwanted + addressbar + in + Bottom + Screen & edit_title = 1 #question - Form
    or
    https://support.Mozilla.com/NL/questions/new

    and so, is displayed in the lower left corner of the screen.
    It's on many sites the same

    It's Preview URL of score. The best way to hide this is to use the module Status-4-Evar. With it, you can choose to not display the messages of State or the stationary URL previews, or rather display them in the bar modules or the address bar.

    https://addons.Mozilla.org/firefox/addon/status-4-EVAR

Maybe you are looking for

  • My online discount number - appears not

    I signed up for the service from month to month for North America. The site said I should get a discount of 50% off an online number. I'm trying to reactivate one of my previous issues online. It's showing a price of $60 for the year instead of $30 (

  • battery always at 99%

    HP Pavilion 13 - r010dx x 2 removable PC product nameA brief description of the problem: the battery will not display the correct amount of powerProduct name: HP Pavilion 13 - r010dx x 2 removable PCOperating system: Microsoft Windows 8.1 (64-bit)Des

  • Help install its driver

    Hello world! I have a HP desktop computer I bought in 2007. I tried to install the latest Realtek High Definition Audio Driver, but I am still unable to receive sound. My computer is: Operating system: Windows 7 Home Premium 64-bit System manufacture

  • Problem with CanoScan Scanner

    Recently, I replaced a defective scanner with a scanner CanoScan LiDE 220. I use this with Dell desktop PC running VIsta 32 bit. The scanner is connected through a USB cable. I can scan pictures to my Adobe software, no problem, but am unable to scan

  • Paradox 4.5 for DOS under Windows 7 64-bit.

    We run Paradox 4.5 for DOS on XP without any problem. We got a new 64-bit Windows 7 machine. It will not run in compatibility because of the 64-bit mode? C:\Documents and Settings\XPMUse'PARADOX.exe' is not recognizedoperable program or batch file.