Vertical stripes on the side of yellow on Satellite M30

Similar Questions

• large yellow vertical stripes at the start

  At the start of my IMac (OS el Capitan), I got today large yellowish vertical stripes in small blue strips. After that the computer seeks initially to the top once again without my intervention.

  Now it is werking correctly again.

  At anybodt an idea of what's going on?

  Hi phiillip1,

  Thank you for using communities Support from Apple. I'm sorry to hear that you have had this problem with your iMac, but am glad to hear that it seems to work fine for the moment. If this graphic distortion problem returns or happens again, you can find some of the troubleshooting steps described in the following article useful, up to and including contact Apple Support if necessary:

  (Note: article is for external displays, a number of steps should be applied for integrated display as well)

  Get help with graphical problems on the external displays connected to your Mac - Apple Support

  Concerning

• Reference Dell 5130 has 3 light vertical stripes in the print area.

  The printer has three light vertical stripes which seem to affect all the colors too.  Place the solid blocks for each of the colors (red, yellow, blue and black) k each color block exihbits light strips on the left of the printed area, one near the Center and the other near the right side when printing with a margin of 1 ".  Changing the margins does not affect the position of the light areas, only if they fall within the print area or not.  When the background is white no line or band appears in this area.   Any thought as to the cause and the cure.  All consumables are reporting that they have at least 15% life left or more.

  I tried the 32-bit version of Windows XP and the 64 bit version of Windows 7, even documents printing same results.

  Problem solved, we can't assume that all users perform basic maintenance when you change toner cartridges.  Run the cleaning pad in each of the slots for each color, as shown in the normal maintenance and cleaning information.  This should have been made at least after every change toner because was not not like these residue accumulated on surfaces resulting scratches.

• There is a roll as a stripe on the side of the page.

  I had a paper jam until I changed the ink and after a successful installation, a strip of 3/4 "running on the side of the page. Looks like there's a roll by dragging on the paper. My printer is a HP LaserJet CP1025nw relatively new color. I'm a graphic designer, so I use lots printer - and it's only the second time that I've changed the ink.

  Hi, here is a link to a document that goes over issues of print quality with your LaserJet printer.  There are examples to review print quality problems.  There is a menu drop-down, you can click on and examine these examples. Yours seems to be a problem of vertical lines.  The link goes through some great troubleshooting steps to use to try to solve the problem.   I hope this helps you.  Here is the link: http://support.hp.com/us-en/document/c02508604

• Tecra 8100: vertical stripes on the screen

  I just bought a second hand Tecra 8100, who has been stripped of all its programs, OS. So I installed Windows98SE on this - now I get a screen with vertical stripes, which perch in the middle of the screen of the laptop with Windows just about visible in the background.

  I went to the display driver Toshiba and downloaded Web pages relevant windows 98se. Once on my laptop, the exe file does nothing; is neither their "graphics card" option in my device manager - everyone has ideas as to what is happening?

  Hello

  Please connect external monitor to your laptop and check if the result is the same. If so, there is probably a problem with the graphics card. If this isn't the case, I presume your laptop LCD screen is defective.

• Tecra M2: vertical stripes on the screen!

  I have a laptop Tecra M2, which (to this day) starts with a display of colorful vertical stripes that gradually change color and width over time - trippy!
  The laptop is password protected, and I can always connect (although can't see what I'm doing).

  So it seems to be a screen rather than a computer problem or a software problem. Any ideas how I can get rid of the scratches?
  Or I am looking to buy a new screen to the laptop?
  See you soon.

  Hello

  Have you tried to connect the external display of notebook o? Not?
  Do it and check if scratches appear on the external monitor.
  If the lines do not appear on the second monitor, the screen of the laptop or one piece is malfunctioning. But it must be a graphics card problem.

  But if scratches appear on the second monitor there must be a card problem.
  However, it seems that it s a hardware problem and you will need to ask a technician for assistance because I put t think you will be able to fix it yourself

• Blue and green vertical stripes on the screen

  Hello!

  My laptop (about 2.5 years lol) overheated and then stop. When I tried to reboot, I get blue and green vertical stripes running through the screen (instead of the part of connection appears) and then the screen turns black.

  It works fine in Safe Mode and when I tried running a Ubuntu Live CD, it starts and the colors were very good and there is no odd scratches. It seems that I only get scratches when I try to start in Windows, in normal mode.

  I hooked another monitor and got the same lines across the screen, so I guess that is not a problem of display... I tried to reinstall the nvidia driver which I redownloaded the Toshiba site, while I was in safe mode, but it still does not.

  Can someone help me, please?

  > I have hooked to another monitor and got the same order of ideas that cross the screen, so I guess that it is not a screen problem
  It is of course graphics card problem and it should be replaced. :(

• How to use the external screen with my Satellite M30?

  Hi guys, I have the following problem:

  I have a portable Satellite M30-642 former. My keyboard it is completely broken (spilled something on it) so I use an external USB keyboard.

  Now that I bought a TFT I wanted to use it as a primary device, so I need to take the laptop to the external output.
  The laptop itself recognizes as a secondary screen already, but this isn't what I want.
  Problem is I can't switch from the display without the FN key devices!

  I tried to search the net and this forum - but the solution posted does not work for the M30. There is no option in the utility of HW and not in the BIOS to enable the external keyboard support.
  Please is there any other combination of keys that would work or a software utility that allows me to turn on? It's a really bad situation for me :(

  All solutions anyone? :(

  Greetings and thanks in advance
  HQ

  Hello

  Please don't be crazy on me but I write here very often and somehow try to help, but I'm still irritated if someone thinks that anything is possible. Unfortunately, you have to accept that sometimes there is hardware limitation and there is nothing to do.
  I want to talk about primary and secondary monitor.

  On most laptops, the LCD is always set as primary and cannot be changed. So, as far as I know, without using the FN + F5 key combination you extend the desktop to external display and use both of them. Using display settings you should be able to switch to an external display only (display control panel settings NVIDIA advance settings and so on). Please test only because I don't have M30, but the principle is used the same.

  If you will be able to use external display only try to restart your laptop and see on which screen the office will be shown. If you will be lucky and office will be shown on the external display, try to extend the desktop to second monitor (laptop LCD).

  Good bye

• Qosmio X 300 - 14 p: problems of graphics card and the vertical stripes on the screen

  Hello

  2 days, after a long session laptop in many hours a lot, all of a sudden after the game for 2 hours
  Patrician 4 addon, it crushed in a strange and never seen before in a way:

  The screen would show the strange and weird color under all its forms rushing on ther display. You can't recognize anything, and after a few seconds of this screen and the x 300 - 14 p completely froze / crashed (hung - no reaction on anything except power plug pull or pressure on the button 5 seconds walk / stop ther).

  I was scared because it looked like to me a serious problem of graphics (nvidia chip) card or display.

  I was hoping it was because of the heat (even if I have a powerful block of cooling below the laptop and the heat shouldn't be a problem).

  Next day (yesterday), I launched the game immediately after the start, and after a few seconds the same crash appeared again with the same strange video glitches (never seen anything strange like this before).

  I immediately made the 5 second power button press reset. and then, when the first splash screen appears (the bios display indicator and the loading/splash screen), there was like 2-7 white stripes vertical (on black background) on the right side of the screen.
  They would not move or go away.

  I immediately turned off the laptop and it is off since then.

  For me this looks really serious, as if each chip nvidia (Geforce 9800 GTX) is broken or the display.

  Someone knows something about it?
  Everyone knows about this problem?
  Who knows more?

  I know, I can now connect an external monitor.
  If there is no problem, this should mean that it is a x 300 display problem

  If the problem also appears on the external monitor, the nvidia gpu chip. At least that would be my guess.

  Anyone have an idea about it, what it might be and what I could do?

  (I'm afraid to send him only the x 300 in to toshiba for fixing is not worth, because it's quite old)
  (it was purchased new in June 2009). fixing, it is probably too expensive.

  Any ideas on HCet problem?
  I've never had before.
  Who can help?

  Thank you

  PS:
  I was thinlking to buy the new qosmio X 870, but I just saw that there is no express card slot, I need for different expansion modules (like the tv and video equipment, more etc.pp cards e-sata).

  Without an express card slot I would not buy any laptop computer, I need urgently this slot machine (it's like a pci-express slot card connection in a desktop pc).

  For me the express card slot is vital.
  Never saw so many bad books.

  If io may need my x 300 for quite awhile,
  But what I would do abpout this weird new chip/video display problem?

  Hello

  I agree with you that it looks like a GPU problem.
  This means that it is the worst case, because in most cases the motherboard needs to be replaced
  Even if the GPU would be replaceable, this piece would be very expensive
  However, you can get in touch with a local ASP from Toshiba and can ask how it is

  Good luck

• HP 2600n prints with a blue vertical line on the sides

  There is a powder blue line appearing on my paper when I print. This vertical line appears on the left side of all my papers. I opened the front to find coverage that revolves around the rollers had what looked like to dry ink on this subject. I wiped it out and for one or two pages no. or very weak lines appeared. They are back.

  Help!

  Hi ellettrhi,

  ·         Since when are you facing this problem?

  ·         Remember to make changes?

  It looks like a hardware issue to me. However, try the following.

  You can view the following HP help guide and see if it helps.

  Print the HP Color LaserJet 2600n printer

  See also:

  Solve a HP Color LaserJet 2600n printer problem

  For more help, you can contact HP.

• 4 vertical stripes on the screen of my Qosmio G-series!

  Hey.

  I got 4 vertical lines on my laptop screen. 2 pink and green 2. They appeared either when I turned on my computer or restarted. Got my first line last month. Can I do anything with this issue? The machine is 3 years old.
  Stian cordially.

  Picture of my screen.
  [http://i288.photobucket.com/albums/ll162/bruteforce82/1.jpg]

  Published by: Admin on April 12, 2008 09:17

  Hi friend

  It's definitely a hardware failure. The question is:

  What is the screen, the display cable or the motherboard.

  You know that you will have to pay for it, but it s on you if you do not want to spend the money for it or just sell it on Ebay and get another machine.

  If I were you I contact some store or a repair service center and ask them a health check of equipment, so you can locate the defective part.

  Welcome them

  P.S.: If you need a link to the closest match. Authorized service center then click on [HERE: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871].

  Welcome and good luck

• MFP m276nw thickness of the stripes on the side the impression, very light, reverse banding.

  A printer that I produced a thick band on the printed side and a very weak banding on the reverse. I changed all the toners. Any ideas before I jump...

  

  

  

  Sorted. The problem was due to 2 bad cartridges. I was wrong due to replace one by one the toners. It was a double fault or stray cartridges producing the same effect. Solved by replacing all the toners simultaneously then presenting one of the elders put one at a time until the fault has reappeared.

• Discoloration of the vertical stripes on the photos

  Hello

  I have the HP Photosmart C4680 all-in-One, with cartiridges of original ink 300XL and 5 * HP Premium Plus Photo paper.

  I'm having a problem with the picture quality of some of the photos I print printing. It seems that the large surfaces of single-color get strange vertical discolored on them. Take a look at the attachment below and let me know what you think.

  Thank you.

  

  __________________
  ... life runs the code...
  .NET, android, ASUS.
  __________________

  In case someone else has the same problem, I tried to print the same photo using Picasa with the same exact paper/detail settings, I had already used with the Windows Photo Viewer and it turned out perfect! I knew it would make a difference at the outset because photo took almost 3 times the time to print as he did previously.

  My suggestion is that you should try a different software first, I lost way too much ink/paper trying to clean the head and printing and re-printing of the same photos...

• Cannot find the netdevio.sys on my Satellite M30

  I tried to update configfee but my m30 asked netdevio.sys. anyone has any idea where I can find this file?

  Hello

  I found this file on my Satellite A50, but this file is maybe model based!

  You tried to unzipp the configfree.zip, downloadable on http://eu.computers.toshiba-europe.com - Support & Download - Download driver and search for the file in the .zip!

  Goodbye, Meier

• With the help of SD on Satellite M30-304 cards

  I tried to use an SD card for the first time. The ability of this card is 2 GB.

  After inserting the card and this card in 'My computer', double click, a message arrived that the card is not formatted and I want to do. I chose to get into shape and a message says: 'this card cannot be formatted. When I click with the right button on this map in 'My computer' and chose the option of Toshiba format the SD card an error message came as 0x0340FF00 error code.

  I also put an SD card containing the files (from my Palm PDA) and tried to open it, but the message came as "this card is not formatted.

  Can someone help me, please?

  BDC

  Hello

  I know not all SD card sizes are supported.
  I m does not quote sure what max SD card format can be used in the slot of the M30, but probably 2 GB of SD card is not compatible.

  However, you said that you want to format the SD card, but have you tried to use the format utility Toshiba SD memory card?

  Please check this!

  All the tools and drivers are on the European driver Toshiba page.
  But note; M30 drivers have been moved to the Archives!