Discoloration of the vertical stripes on the photos

Similar Questions

• OfficeJet Pro L7780: Officejet Pro L7780 missing of the vertical lines on text & photos

  Everything that I try to print has lack of vertical lines, text or photos. Happens if I print from my computer or if I try to copy a page directly to the printer. I went through the troubleshooting page full... the ink is all well heads, all good impression. Whenever I try to run a printer align it does not end the page. Whenever I have nothing he's trying to align printer print when its done & still cannot print the entire page. Gives me an error and says to check my documataion. I checked the book with my printer & there is nothing in this whole problem.

  Help, please!

  Hi @LockGal,

  Welcome to the Forums of HP Support!

  I see that you are having problems with your HP Officejet Pro L7780 printer aligning and printing vertical lines. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration that this must be for you. Looks like there are two separate issues. When the printer clean print heads and not properly align itself, this indicates that there is a problem with the cartridge, the print head or the line break. For vertical lines, it is usually independent for cartridges and print heads (not being is not a print quality problem). The paper type and print settings might be the problem.

  To help determine the cause have you used this document: troubleshoot print quality HP Officejet Pro L7500, L7600, and L7700 all-in-One Printer Series?

  Use the document in the order will help you determine if the print heads need to be replaced. If so, please contact HP.

  Please confirm that the vertical or horizontal lines?

  NOTE: are not replace the cartridges and printheads for vertical streaks in a print. Instead, check the paper as directed earlier in this document, or search for a document that addresses this issue. Vertical streaks on copies can often be fixed by cleaning the scanner glass.

  • L7300 of HP Officejet Pro L7500, L7600 and series L7700 each - vertical stripes, lines or streaks on Copies, faxes or scan

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Vertical lines on the Photos using HP Photosmart Plus

  I just bought the HP Photosmart Plus last week.  The 1st photos I printed, using the paper supplied with the printer (HP Advanced), went well.  My wife bought "Printworks' 4 x 6 sheets of brand.  First of all, I had a paper jam.  I don't know if it's relevant.   The photos I printed had 12 visible vertical lines.  He seemed separate from 12 vertical strips sewn together.  So, I went out and my HP Premium Plus paper.  It still looks like 12 vertical strips.  There are noticeable verical about 1/2 in. lines.  I also think it seems grainy.  The photo was taken with a Nikon 10Mpixel, so resolution is not a problem.  I printed out as some other pictures and they had the same problem.  I was careful about settings, choose the premium more paper and choosing the best quality.  I also cleaned the print heads.   Any ideas?

  Joe S.

  All the:

  I finally had time to shoot the print head and cleaning it.  This seems to have solved the problem.

• Sorting unused Photos in the Photo in Photos 1.5 Strip

  In the Finder, I created a folder of photos, arranged the file by file name, then renamed pictures while they were in the general order, I wanted the photos to appear in a Photo book.  I imported this ordered all of the photos in picture 1.5, created a new album, copied Photos imported into the new album, click with the right button on the name of the album to sort the album by the title and the display of photos in the correct order.
  I chose the new Album, then created a new book.  Inexplicably, ordered Album photos are displayed in the Photo Strip in some apparent order of date with no option to sort the photos in the Photo Strip by title.
  How do a get the pictures in the strip of photos sorted by title so they can be moved to images in Photo book without scrolling back just looking through the Photo Strip?

  Those are sorted by date - on the only way to accomplish what you want is to add photos to the book a page at a time, place them in the book and then add the next page of photos

  LN

• Tecra 8100: vertical stripes on the screen

  I just bought a second hand Tecra 8100, who has been stripped of all its programs, OS. So I installed Windows98SE on this - now I get a screen with vertical stripes, which perch in the middle of the screen of the laptop with Windows just about visible in the background.

  I went to the display driver Toshiba and downloaded Web pages relevant windows 98se. Once on my laptop, the exe file does nothing; is neither their "graphics card" option in my device manager - everyone has ideas as to what is happening?

  Hello

  Please connect external monitor to your laptop and check if the result is the same. If so, there is probably a problem with the graphics card. If this isn't the case, I presume your laptop LCD screen is defective.

• Tecra M2: vertical stripes on the screen!

  I have a laptop Tecra M2, which (to this day) starts with a display of colorful vertical stripes that gradually change color and width over time - trippy!
  The laptop is password protected, and I can always connect (although can't see what I'm doing).

  So it seems to be a screen rather than a computer problem or a software problem. Any ideas how I can get rid of the scratches?
  Or I am looking to buy a new screen to the laptop?
  See you soon.

  Hello

  Have you tried to connect the external display of notebook o? Not?
  Do it and check if scratches appear on the external monitor.
  If the lines do not appear on the second monitor, the screen of the laptop or one piece is malfunctioning. But it must be a graphics card problem.

  But if scratches appear on the second monitor there must be a card problem.
  However, it seems that it s a hardware problem and you will need to ask a technician for assistance because I put t think you will be able to fix it yourself

• Blue and green vertical stripes on the screen

  Hello!

  My laptop (about 2.5 years lol) overheated and then stop. When I tried to reboot, I get blue and green vertical stripes running through the screen (instead of the part of connection appears) and then the screen turns black.

  It works fine in Safe Mode and when I tried running a Ubuntu Live CD, it starts and the colors were very good and there is no odd scratches. It seems that I only get scratches when I try to start in Windows, in normal mode.

  I hooked another monitor and got the same lines across the screen, so I guess that is not a problem of display... I tried to reinstall the nvidia driver which I redownloaded the Toshiba site, while I was in safe mode, but it still does not.

  Can someone help me, please?

  > I have hooked to another monitor and got the same order of ideas that cross the screen, so I guess that it is not a screen problem
  It is of course graphics card problem and it should be replaced. :(

• Vertical stripes on the side of yellow on Satellite M30

  Im a network administrator, over 30 laptop computers from Toshiba, recently among the satellite M30 appear vertical stripes on the side of yellow whith.

  Is this a problem whith the screen? The main Board? The video card?
  And what migth cause this?

  Thanks in advance.

  Hi Daniel

  You'll be lucky if anyone has an explanation for this. It is just a forum user. Contact the service partner in your country and ask them. They have more experience with hardware problems and I'm sure they can help you.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

  If you have specific information on this topic please let us know what the problem is.

  Thank you

• Equium L20 - vertical strip of 2 inches of distortion of color on the display screen

  I've had this laptop since January this year. He returned to the store for repairs because the battery is charging and when they were finally returned to us but now there a thick vertical stripe of color which varies from blue to orange to pink and changes the color of any text written in it. Recently, there is another vertical band that comes and goes across the screen.

  If anyone can help... I don't want to have to send it away again for repairs.

  Thank you

  Hello

  I don t think you will be able to resolve this question of the vertical line.
  In my opinion the only thing you could do is the procedure of updating the graphics driver.
  For other procedures, you need to remove the covers and this would disable the guarantee.
  That's why I put t recommend this doing.

  I think that if the warranty is valid, then you should ask the Toshiba service partner in your country for the control of the laptop. All repairs and replacement are covered by the warranty.

• large yellow vertical stripes at the start

  At the start of my IMac (OS el Capitan), I got today large yellowish vertical stripes in small blue strips. After that the computer seeks initially to the top once again without my intervention.

  Now it is werking correctly again.

  At anybodt an idea of what's going on?

  Hi phiillip1,

  Thank you for using communities Support from Apple. I'm sorry to hear that you have had this problem with your iMac, but am glad to hear that it seems to work fine for the moment. If this graphic distortion problem returns or happens again, you can find some of the troubleshooting steps described in the following article useful, up to and including contact Apple Support if necessary:

  (Note: article is for external displays, a number of steps should be applied for integrated display as well)

  Get help with graphical problems on the external displays connected to your Mac - Apple Support

  Concerning

• Reference Dell 5130 has 3 light vertical stripes in the print area.

  The printer has three light vertical stripes which seem to affect all the colors too.  Place the solid blocks for each of the colors (red, yellow, blue and black) k each color block exihbits light strips on the left of the printed area, one near the Center and the other near the right side when printing with a margin of 1 ".  Changing the margins does not affect the position of the light areas, only if they fall within the print area or not.  When the background is white no line or band appears in this area.   Any thought as to the cause and the cure.  All consumables are reporting that they have at least 15% life left or more.

  I tried the 32-bit version of Windows XP and the 64 bit version of Windows 7, even documents printing same results.

  Problem solved, we can't assume that all users perform basic maintenance when you change toner cartridges.  Run the cleaning pad in each of the slots for each color, as shown in the normal maintenance and cleaning information.  This should have been made at least after every change toner because was not not like these residue accumulated on surfaces resulting scratches.

• Cannot align the bottom edge of the photo with the top of the taskbar on the H - P dv7-4296 running Windows 7

  I have a dv7-4296nr running Windows 7.  I use a slide show for my wallpaper.  But some of the graphics that I use are not among the standard background images and are not size 1600 x 900 pixels.  I resized them so that the vertical dimension is 900 pixels and the horizontal is not more than 1600 pixels.

  I want to put a text caption simple (usually only one word) in the lower right corner of the image, as close as possible to the lower edge.  Put the text in the image is easy, but he displayed is not!

  The problem is that the taskbar hide the bottom of the image, including the legend.  I can think of two approaches to solve the problem, but have not been able to get either to work.

  The preferred approach is to resize and place the photos so that the bottom of the image is almost exactly in line with the top of the to-do bar and the top of the image is at the top of the screen.  That would allow me to display the entire image with the caption placed where I like it.  I was not able to resize the images and place them in the display to achieve this.  Can you tell me how to proceed?

  The other answer, which is less satisfactory, is to move the legend to the top, so the base line is just above the top of the taskbar.  How far away from the lower edge of the baseline of the text image will have to be to do this?

  Thanks for your help!

  The taskbar are 40 pixels high, so you can see only 860 900 pixels display area.  The simplest solution is to put the pixel text-based line at least 40 of the bottom of the image and use the option Center in the positioning of the image menu.  Unfortunately, this leaves the background pixels 40 obscured by the taskbar.

  A more elegant solution is to resize the image in order to make the vertical dimension 860 pixels.  I use Corel Paint Shop Pro, which has a function called 'Size of the canvas', and I don't know there are similar functions in other paint programs.  Canvas size allows you to add a background (a "Web") and specify the size of the canvas as well as the location of the image on the canvas.

  I make the white of the canvas, 900 pixels high and the same width as the image.  It gives me a bunch of white 'canvas' 40 pixels up and down.  I add the text, and then store the resulting image in the folder that contains the images on my desk of slides.

  It works very well: the taskbar don't obscure than the white stripe, while I can see the entire image with the text placed where I want.

• Resize, reposition the photo presentation

  Is it possible to resize, reposition or change the proportions of a picture on a page in a theme for a photo book?  Or if a disposal option has a vertical and two horizontal photos on the page that I can remove the horizontal photos and have only one vertical picture?  Or should I always let the app crop my photos to adapt the boxes given in the presentation of the topic?

  Thank you.

  Richard,

  Impossible to delete or resize photos in photo boxes. You must choose a theme and a layout were the photo boxes are just right.

  What you can do is shift the picture in the box, enlarge or scale down to fit the box, but the proportions of the area will remain the same. See this help page:

  https://help.Apple.com/photos/Mac/1.0/?lang=en#/pht337d0a03

  • Resize a photo: double-click the photo you want to edit. Drag the slider to Zoom & Crop to increase or decrease the size of the photo, and then drag the photo to move it back to the framework.
  • 
  • Match entire photo in a frame: control-click on the photo, and then choose Photo to adapt to the framework. (This command is not available for all themes). If you fit a photo in its framework, empty edges can appear along the sides of the photo so that the largest part of the photo can fit into the framework.
  • Return a photo in a frame: control - click on the photo, and then choose picture Flip. When you reverse photos, realize that the text or logos that appear on the photo may appear as a reverse mirror image.

• The photos exported photos are 4 KB on PC and cannot be opened.

  When I export photos from the Photos on a flash drive that is via the file-> export or by simple drag-and - drop, I am unable to open JPEG files on any other non Mac device. All the photos are great only 4 KB and there is no preview.

  Someone knows how to fix this?

  MacBook Pro (mid-2014), OS X Yosemite 10.10.3 and Photos 1.0.

  Thank you very much and Merry Christmas to you all,.

  Lorenz

  Select the photos you want in Photos and export (File menu ==> export) in a folder on the desktop - drag the folder from the desktop to the flash drive and you will have photos of size you choose - if you still have problems to open on the PC you need software to strip the link resources

  LN

• See the Photos as a slide show.

  Viewing pictures as a slide show in Microsoft Digital 2006, a black ban has recently appeared on the screen.

  Have checked all my photo files, black bands appear on all the pictures,

  Either by the way, these bands appear on no other files.

  can help?

  Thank you

  Kevin J Quinn

  Please describe the black stripes...

  They are on the edges of the photos (up/down or left/right sides)?

  Or the strips cover the part photo, like a stripe in the Middle?